136,464 used machines on RESALE, but how to find them? Machine Search
Key data: 1 mm
Notching machine Make: Euromac Type: 220/6 R Year of Make: 1999 Material thickness: 1-6 mm -Hydraulic knife clamping device, with 2 hydraulic cylinders -Cutting unit with 3 guides -Reversible blade, means: positive cut: start of cutting at the front negative cut: start of the cut at the back -Variable and infinitely variable cutting angle adjustment -Stop rails with adjustment Weight: approx. 1000 kg Condition as good as new, because almost not used. No guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.
1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.
Specifications Model: 25 lpv Tool holder: MK3 Pinole stroke: 110mm Projection: 400mm Drive: 3 phase motor with 2 motor stages and V-belt drive Speeds 14 / 35 – 65 – 70 – 125 – 130 – 200 – 250 – 335 – 400 – 570 - 670 – 1140 – 990 – 1980 rpm Table dimensions: LxW 330x330mm Machine dimensions: LxWxH 410x700x1830mm On the machine, we installed a new motor and renewed the entire electrical system with the step and motor circuit breaker as well as the cables.
ID3858 Furukawa HCR1450 ED year/Baujahr 2015 10.150 hours/hours 15.3 t Blast-hole drill rig; new engine installed approx. 1,490 hours ago; old engine—still functional—included (high crankcase pressure due to worn piston rings); includes a pallet of spare parts (5 hammer shanks, filters, GT51 drill rods, drill bits, etc.); additional drill rods available optionally Blast hole drilling rig, new engine approx. 1,490 hours ago, old engine – still functional is included (increased crankcase pressure = piston rings worn), incl. pallet with spare parts (5 hammer insertion ends, filter, GT51 drill pipe, drill bits etc.), optionally more drill pipe available
MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service fo ...
Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage
Rated power at 50%ED: 20kVA Short-circuit current: 11.6kA Electrode force: 180daN Projection: 455mm Arm distance, stepless: 173-410mm Electrode cone: Mk1 --- Welding control: WS 402 (4 times, 2 program) --- Incl. additional options: - Foot switch - Main switch - 3m connection cable and Cekon plug 32A --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Ref.Nr. 00938 Commercial offer Name of the system: Coordinate welding machine Manufacturer Ideal Factory Model CSR 101 Year of manufacture 2005 Rated power 125 kVA Connected load 125 kVA Open-circuit voltage 9 V Primary voltage 400 V Nominal frequency 50-60 Hz Fuse 200 A Repairs and overhauls These would be the most important repairs. CSR 101 Timing belt for lower table renewed in 2021 Water flow monitor renewed in 2023 Maintenance hoses for cooling renewed in 2022 Welding transformer 2024 replaced and contact surfaces revised on the secondary side Secondary rectifier 2024 sealed and revised 2024 Cooling system cleaned and re-hosed, operation with Addinol Protect extra Battery for control unit renewed in 2024 Proportional valve for electrode force 2025 overhauled Condition of the system under power, can be visited by app ...
small shrink line for sale consisting of vacuum chamber machine C 30 and shrink tank ST 40/60 - both mobile C 30 New machine - ST 40/60 overhauled 2022
Fully automatic stretch film packaging machine with scale & labeler Packing Plant / Wrapper + Labeler DIGI AW-5600 FX The AW-5600 FX is an automatic weighing, packaging and labeling system with high performance for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It protects film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and visually appealing. Technical data Wrapper DIGI AW-5600 FX 220-240V / 50-60 Hz / 1.8 kW suitable for Food-Tainer bowls Performance up to 17 packets/min Film width: 350 - 500 mm Year of construction: 2018 Total weight approx. 250 kg Digi marking system 3/6 kg, Min 20g, e=1/2g Calibrated until 31.12.2022 Function tested, ma ...
CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.
SPECIFICATIONS: 2 brushing units Width transport carpet mm: 400 Workpiece height mm: 10 - 120 Feed speed m/min: 8-12 Installed capacity KW: 2.0
BHT INNOVA E3 Professional Bronchoscope Washing Machine INNOVA – Professional endoscope washing machine for practices and small clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washing machine. This endoscope washing machine is compact, offers a high capacity for endoscopes or bronchoscopes. Depending on the treatment, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for general practitioners and small clinics that value safe hygiene, efficiency and reliability. Item condition: used
Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg
Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Hori ...
travel: 1600 mm length: 1600 mm width: 1200 mm spindle head according to: spindle turning speed range: 100-12000 U/min switching steps: feeding velocity x-Axis min./max.: mm y-Axis min./max.: mm Control: Fanuc Brand: OKK Type: VP1200 CNC brand: Fanuc CNC model: 160is-MB Year of make: 2004 Table length: 1.600 mm Table width: 1.300 mm X: 1.600 mm Y: 1.300 mm Z: 550 mm Throat depth: 560 mm Tool changer: 40 Minimum speed: 100 RPM Maximum speed: 12.000 RPM Max. workpiece diameter: 82 mm ø Maximum table load: 2.000 kg For additional information, please refer to the pdf file Machine dimensions: 5.800 x 3.200 x 2.800 mm Machine weight: 16.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MPE Tray sealer Serial: 1067 Stainless tray sealer, tooling for 185mm x130mm and 100mm x 90mm trays, adjustable temperature and timer controls, mobile, 1Ph
Brushes + grinding machine Erma Fabr. Erma Type. DG 243 Engine. 1.5 kW Turn. 1430 rpm
Jackdal trolley Overwrough sewing machine KL 759
Equipped with pneumatic clamping Auction-ID: A1-50090-76
Edge banding machine Sumbel Perkeo 60; good condition; cleaned and tested; Working width 60mm; 1 roller; suitable for cold glue; new table; new glue basin; new roller; new clutch. Edge gluing machine Sumbel Perkeo 60; good condition; cleaned and checked; working width 60mm; one roller; used for cold glue; new table; new glue reservoir; new scooter; new clutch.
General Description Professional water-cooled multiprocess pulse welding system manufactured by EWM AG , model Alpha Q 551 Expert 2.0 puls MM FDW . Designed for demanding industrial fabrication and production welding applications. The system supports MIG/MAG standard and pulse welding as well as additional welding processes depending on the installed configuration. Technical Details Manufacturer: EWM AG Model: Alpha Q 551 Expert 2.0 puls MM FDW Machine type: Multiprocess MIG/MAG pulse welding system Article No.: 090-005360-00502 Serial number: 0000485895 Welding range: 5–550 A Output at 60% duty cycle: 550 A Output at 100% duty cycle: 420 A Power supply: 3 × 400 V, 50/60 Hz Maximum input current: 42.6 A Effective input current: 32.0 A Open-circuit voltage: 93 V Water cooling system: 1.5 kW Maximum cooling pressure: 3.5 bar Protection class: IP23 Separate EWM wire f ...
equipped with water cooling system Auction-ID: A1-49889-186
Matthews Matthews Marking Systems Marking Printer or Marking Printer Type144907.01 Lite Controller MPERIA Control Supplied with ink and thinner The device was used to print bags in a mill CE compliant Very good condition
ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...
BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America
- Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with Schuko plug SPECIFICATIONS - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column Ø: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): by hand - Spindle speeds infinitely variable: 60 – 6,000 1/min - Continuous/normal drilling capacity: 10/12 mm - Thread cutting performance (depending on slope): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION Drilling package (No. 296570) Machine vice Flott [felix] 80 and quick-release drill c ...
Capacity: 120 Amp. – 19 kVA X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Table dimensions: 1,100 x 700 mm Distance head - table: 950 mm (max) Oil retainer: 1,700 x 1,000 x 650 mm Workpiece weight: 4,000 kg (Max) Control: CNC Datic S120
maximum number of results exceeded
please refine your search
100 € 
