tcg 2020 used for sale

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3623

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video:https://youtu.be/l0uTt_vas10 - Former Linde full-service device - Battery: 14/2020, 24 3PZS 375Ah, very good performance measured at 25.2 V Auction-ID: A1-45449-343

Equipped with: 4,000 kg lifting capacity, LPG drive, lifting height approx. 5.0 m, own weight approx. 7,000–8,000 kg. Air conditioning. Auction-ID: A1-40133-68

Equipped with: 1.5 dCi (66-81 kW / 90-110 hp), roof rack, air conditioning, electric windows, at 88000km, timing belt replaced, length 4.40 meters, width: 1.69 meters (excl. mirrors), height 1.86 meters, wheelbase: 2,725 mm, cargo space: volume: Maximum 4.2 M3, length cargo floor: 2,040 mm, width cargo space: 1,220 mm - 1,500 mm. Auction-ID: A1-42012-202

Features: Length 3 Height 2 Automatic gearbox Insulated cargo space Ad blue system Cooling motor (working) Rear doors Side sliding door SAFE bumper Towbar Air conditioning Rear camera Vehicle dimensions: 640cm length, 265cm height (including cooling engine) Dimensions of cargo space: 170 x 170 x 350 cm Auction-ID: A1-42012-132

Accessories living: Wide entry door, Electric footboard, Refrigerator, Stove (3-burner), Boiler, Shower, Toilet (cassette) New, Dividing door, LCD TV, Satellite, Air conditioning living area, Ring heating, Winter insulation, Household battery, Reading lights, Hail-resistant roof, Awning (Thule), Bicycle carrier, Panorama roof, Screen door, Queens bed, Pull-down bed (electric), Dutch Sleep Comfort mattresses New, Slatted base, Solar panel, Double floor, XXL Garage Cabin accessories: Airbags, Audio system, Reversing camera, Parking sensors, Cruise control, Alloy wheels, Apple CarPlay, Android Auto, Immobilizer, Power steering, Cabin air conditioning, ABS, Bearlock, Electric windows, Central locking, Alarm, Air suspension, Seats swivel, Multifunction steering wheel, Electric mirrors, Delivery package Auction-ID: A1-42012-2

Auction-ID: A7-45252-1

Suspended front axle, pick-up tow bar, top link, air brakes, hydraulic car brake valve, fender control, 4-point cab suspension, 50km/h, air conditioning, GPS, track width 2050mm, load sensing, 540e/1000/1000e pto rpm Auction-ID: A1-40133-4

KUHN GMD 3125 F-FF – front mower Technical data Manufacturer: KUHN Model: GMD 3125 F-FF Year of Make: 2020 Working width: approx. 3.10 m Cultivation: Front Attachment Multi-disc mower deck Weight: approx. 1,100–1,200 kg (according to the nameplate) Facilities Incl. drive shaft Hydraulic relief Foldable side guards Protective tarpaulin with warning signs Robust cutter bar construction Cutting height adjustment via sliding plate Condition Visual condition: good, usual signs of wear Technical condition: functional Wear according to the year of manufacture Ideal for professional grassland management and high area output. Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction-ID: A7-45490-31

Equipped with: hydraulic quick coupler, articulated steering, extra forks, bucket, 2x double-acting hydraulic valves on boom, pressureless return, work lighting, tow bar, lifting eyes, NL registration Auction-ID: A1-40133-110

equipped with: built-in battery charger 230V, 24V battery Auction-ID: A1-40133-298

Electric windows + mirrors, heated mirrors, cruise control, electric windscreen heating, stop and go, climatronic air conditioning, multimedia system with apple carplay and android auto preparation, Q-step rear bumper with parking sensors, Sortimo van racking in cargo box, TS Enovations inverter Auction-ID: A1-45424-4

Equipped with electric start, lifting eye, forward and reverse, air-cooled diesel engine, high/low gearing, drum scraper Auction-ID: A1-45424-32

Dimensions approx. 450x260x560 mm Auction-ID: A1-45495-408

Göweil G1 F125 Combi round baler with integrated wrapping unit built in 2020. Machine with variable bale chamber for bales up to 1,250 mm in diameter and automatic film wrapping. Equipment: • Pick-up (approx. 2,200 mm working width) • Cutting unit • ISOBUS control • Camera system • Central lubrication system • Tandem chassis with wide tyres • Double bond system for net and wrapping film Operating data: • approx. 31,144 bales • 913 operating hours The press room, rollers, chains and conveyors show a well-groomed overall appearance that matches the mileage. Hydraulic system, electrics and controls clean and functional. Overall well-maintained condition from agricultural use. Auction-ID: 04E-MH4-2

In orig. packaging, in stock in wooden box Dimensions wooden box approx. 2090x390x455 mm Auction-ID: A1-45495-447

Dimensions approx. 450x260x560 mm Auction-ID: A1-45495-409

Equipment: 7704078 Brand: STILL Model: FM-X20 Operating hours: 1095 Year of construction: 2020 Lifting mast: triple Height: 2,500 mm Nominal stroke: 5,730 mm Free lift: 1,930 mm Hydraulic actuation: Joystick4+ battery: including load capacity: 2,000 kg, Condition description: Error code A3140 Mast rollers and fork carriage Clearance Hydraulic hoses damaged Load rollers out of round Frame Rust spots Paint damage Condition description: AA: 720 mm AI: 520 mm ZA: 320 mm ZI: 120 mm Auction-ID: A7-45634-78

Equipment: 7687630 Brand: STILL Model: RX20-20P Operating hours: 2709 Year of construction: 2020 Mast: triple mast Height: 2,260 mm Nominal stroke: 5,080 mm Free lift: 1,780 mm Hydraulic actuation: Mini lever Battery: Including load capacity: 2,000 kg, Condition description: Fork carriage clearance Mast rollers Mast bearings and tilt cylinders knocked out Door damaged Frame rusty Battery door Rust spots Battery terminals and trough Oxidizes paint damage Auction-ID: A7-45634-18

Year of construction: 2020, dimensions: 95x88x80cm (HxWxD) Auction-ID: A1-45411-367

Year of manufacture: 2020, S/N: 05 01 20/46, Own weight: 150kg, Capacity: 140 litres, Working width: 850mm Auction-ID: A1-45411-274

Year of construction: 2020, Capacity: 1000kg, Maximum lifting height: 1.2mtr, Own weight: 297kg, Platform size: 225x80cm (wxd), with 3x Mammuth mini scissor lift Auction-ID: A1-45411-158

Year of manufacture: 2020, 230V, with machine clamp Auction-ID: A1-45411-252

Sumitomo yale 41FB15PXIII (orange) battery forklift from 2020 in working condition. -Checked and inspected -6261 driving hours -996 pump hours -Lifting capacity 1500kg -Lifting height 3 mtr -Duplex freelift mast -Hydraulic fork positioner -Built-in charger -Automatic battery water filling system -New full tires Auction-ID: A3-43511-4617

general neat condition: a few small dents + right rear and left front cap broken (turn signal works) - few messages on dashboard (airbag, brake pads, injection system) - CAMERA Auction-ID: A3-43367-10566

300x150x111 Lighting does not need to be checked Only registration available Auction-ID: A3-43367-11434

Led work lights front and rear, blue spot, flash light, illuminated document holder, no marking bands Auction-ID: A3-43511-222

Works perfectly, fully overhauled machine Maximum height 135 mm Maximum width 750 mm Minimum length 650 mm Feed chain width 350mm Maximum blade diameter 381 mm Minimum blade diameter 250 mm Shaft motor 40 kW Electronic feed speed from 7.5 to 30m/min Voltage 380 V Supplied with multiple blades, control rings, machine documents and service keys EC Almost new machine, working +- 10 hours! Auction-ID: A3-43511-36994

6 gears - starts, drives, brakes normally - technically inspected at 84716km - minor body damage and signs of wear outside and inside (see photos) but overall neat condition Auction-ID: A3-43367-10798

New 2025 battery, 4th valve up to carriage with pressureless button, flash light Auction-ID: A3-43511-224

Led work lights front and rear, blue spot, flash light, illuminated document holder, no marking bands Auction-ID: A3-43511-221

Ifor Williams TT35 tipper (3500 kg), double axle, electric hydraulic tipping system with remote control. Including road plates (±3 tons), new battery, new clutch and jockey wheel. Year of manufacture 2019, Belgian papers available. Ideal for transporting machines and building materials. Working and immediately usable - small dent at the back of the loading platform (see photo) - Loading container dimensions: approx. 360 x 190 cm Auction-ID: A3-43367-10797

Complete working milling/drilling machine with digital readout and variable speed. Equipped with cooling installation, machine clamp and tools. Machine is functional and very little used, purchased March 2022 (invoice available) - including rolling work table with material in the photo - Drilling capacity steel 50 mm, Milling capacity steel 25 mm, Mantle milling capacity 100 mm, Horizontal motor 1.5 KW, Vertical motor 2.2 KW, Speed range horizontal milling spindle 60 ~ 1350 rpm, Speed range vertical milling spindle: variable 100 ~ 2000 rpm, Spindle holder ISO 40, Table 1000 x 240 mm- INCLUDING: 3-axis digital readout SINO Automatic longitudinal and transverse feed work table LED lighting Cooling system Deluxe control box Tilting milling head left/right 0 - 45 degrees Swivel worktable DELTA frequency switch - immediately deployable! Auction-ID: A3-43511-10782

Equipped with: Load capacity 3500kg total weight, extra long flap, SMC approved drawbar lock (3 keys) Auction-ID: A1-40134-224

Equipped with: electric motor, emergency stop, power connection (380V) Auction-ID: A1-40134-321

Auction-ID: A1-41992-112

Includes, Battery charger, Length 276cm, Width 125cm, Height 170cm, 48V Auction-ID: A1-42013-144

TOP maintained wheel loader incl. Zettelmeyr/Volvo mount. - Cabin - Wide tires - 30km/h version - hydr. Quick coupler Volvo/Zettlmeyr - Earth shovel - Light material bucket - Pallet fork - 4. hydr. Control circuit for auxiliary equipment - hydr. Oil cooler - electr. Main switch - Rear view camera - Individual permit for Austria available Auction-ID: A1-45733-4

Width Sizes: 110cm, 60cm, 40cm — for 3/3.5T excavator — all buckets are equipped with reversing ears Auction-ID: A1-40134-234

SaMASZ Rotary rake Z-410 Year of construction 2020 Working width approx. 4.10 m Robust grassland machine for swathing hay and straw PTO for standard tractors Three-point hitch for easy and quick pick-up Normal signs of wear due to age and use present Low-maintenance and simple technology Transport position available Auction-ID: 04K-92K-1

Technical data Max. pressure: 30 tons Number of strokes: 100–600 Drive power: 0.96–5.5 kW Frequency: 50/60 cycles Control Current: 24 V AC Compressed air connection: R 1/2\" Operating pressure: 6–10 bar Adjustable stroke: 8-40 mm Adjustable ram height: 40 mm Belt running height from clamping plate: 50 + 100 mm Max. cutting thickness / drawing depth: 4 mm (according to table) Configuration Machine height: approx. 2150 mm Width: approx. 1200 mm Depth: approx. 1160 mm Weight: approx. 2500 kg Suitable for: Stamping and forming work up to 30 t press force Auction-ID: A1-45711-100

Box dimensions approx. 480/450 x 320/300 x 2 mm Auction-ID: A1-45711-313

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-9

Fan dimension 1100mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-101

Technical data Max. pressure: 30 tons Number of strokes: 100–600 Drive power: 0.96–5.5 kW Frequency: 50/60 cycles Control Current: 24 V AC Compressed air connection: R 1/2" Operating pressure: 6–10 bar Adjustable stroke: 8-40 mm Adjustable ram height: 40 mm Belt running height from clamping plate: 50 + 100 mm Max. cutting thickness / drawing depth: 4 mm (according to table) Configuration Machine height: approx. 2150 mm Width: approx. 1200 mm Depth: approx. 1160 mm Weight: approx. 2500 kg Suitable for: Stamping and forming work up to 30 t press force