tc used for sale

Manufacturer: MWM / Caterpillar Model: TCG 2020 V12 K Type of machine: CHP Module Fuel: gas Electrical power: approximately 0.9 MW Thermal performance: approximately 1.1 MW Year of construction: 2014 Generator type: Marelli MJB 450 LB4 Last service: 04/2025 E70 maintenance pending for both modules Module 1 : - Current operating hours: approximately 65,000 hours - Number of starts: 4,384 as of April 2025 - Maintenance E40: 1/2024 at 56,215 hours - Last engine operation: 05-2026 - Condition: basically ready for use and complete, but not in operation due to a defective generator switch Module 2 - Current operating hours: approximately 60,000 hours - Number of starts: 3,911 as of January 2025 - Maintenance E40: 01-2025 at 56,141 hours - Last engine operation: 05-2025 - Condition: basically ready for use and complete, but not in operation due to a defective generator switch Find ...

taper MK: 5 spindle diameter: 60 mm feed: ja m/min weight of the machine ca.: 1,1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1237 KW, 400 V

MWM Gas CHP Container TCG 2020 V12 Gas power and heat generator from 2016, AC generator from 2024, approx. 68,000 operating hours with E70, container with ancillary equipment (oil cooling, oil storage) and steam generators (500 KW). Heat exchanger on demand. 1,200 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: Marelli M8B 500 MB 4 B20, 1,487 KVA Complete plant: SES CHP double container plant Project number: P14297 Manufacturer: SES Energiesysteme GmbH Module type C40 HPC 1200 N DE Type: Gas CHP Container Engine: MWM TCG 2020 V12 Engine Serial Number: 2212741 Power [KWel]: 1,200 Output [KWgas]: 2,750 Voltage [V]: 400 Frequency [Hz]: 50 Engine power [KW]: 1,237 KW Year of Make: 2016 Operating hours: approx. 68,000 Weight unit [kg]: approx. 30,000 Dimensions LxWxH [m]: 12.2 x 5.0 x 5.1 AC Generator Marelli MJB 500 MB 4 B20 Manufacturer: Marelli Model No.: MJB ...

sheet width: 2035 mm plate thickness: 6 mm distance between columns: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...

Pioneer Pump, Inc. (often referred to as Pioneer Pump”) is a global manufacturer of high-performance pumps and pump solutions used primarily in industrial and heavy-duty applications. The company is known for its robust, efficient designs that are intended to function reliably even in the harshest conditions., , Throughput capacity: 960 m3/h, Max dirt passage: 75 mm, Motor brand: JCB TC-63, Max. head: 50 MWK, Max dirt passage: 1800 rpm, , = More information =, , Year of manufacture: 2012, Applicable material: Water, Empty weight: 3.650 kg, Connector size: DN200, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or ca ...

New Deutz TCD12.0V06 This engine has been converted into various machines if you are looking we have it., This TCD12.0V06 333 KW -- 443 HP 1800 rpm., If you are looking for another Deutz engine, please do not hesitate to contact us., We supply any desired type of Deutz engine new, used or overhauled., With appropriate software and in the configuration according to the engine number you specified., , Weight: 950 kg, , = More information =, , Year of manufacture: 2026, Model year: 2021, Colour: Grijs, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would  ...

New Deutz TCD2012L042V this engine has been converted into various machines if you are looking we have it this Deutz TCD2012L042V. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2025, Model year: 2021, Colour: Grijs, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dr ...

New Deutz TCD2012L042V this engine has been converted into various machines if you are looking we have it this Deutz TCD2012L042V. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2024, Model year: 2021, Colour: Grijs, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? O ...

New Deutz TCD 2012L064V this engine has been converted into various machines if you are looking we have it., TCD 2012L064V 152 KW -- 203 HP 2100 rpm., If you are looking for another Deutz engine, please do not hesitate to contact us., We supply any desired type of Deutz engine new, used or overhauled., With appropriate software and in the configuration according to the engine number you specified., , = More information =, , Year of manufacture: 2025, Model year: 2020, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, VAT/margin: VAT qualifying, Type number: Exchange, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discu ...

New Deutz TCD 2012L064V this engine has been converted into various machines if you are looking we have it., TCD 2012L064V 152 KW -- 203 HP 2100 rpm., If you are looking for another Deutz engine, please do not hesitate to contact us., We supply any desired type of Deutz engine new, used or overhauled., With appropriate software and in the configuration according to the engine number you specified., , = More information =, , Year of manufacture: 2025, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, VAT/margin: VAT qualifying, Type number: Exchange, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be u ...

Offered for sale New Deutz Motor type TCD6.1L6 suitable for various construction machines., We have the possibility to supply various Deutz engines completely suitable according to your engine number., Feel free to ask us about the possibilities., , = More information =, , Year of manufacture: 2025, Model year: 2024, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or emai ...

TR40/TC235-140V DC SERVO DRIVE BOSCH The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bosch TR40/TC235-140V The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1930 mm turning diameter over slide rest: 1520 mm turning length: 5000 mm turning speeds: 0,5-250 U/min spindle bore: 105 mm workpiece weight: 35 t steady: 400-700 mm steady: 700-1200 mm steady: 1000-1600 mm control: Siemens total power requirement: 106 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Mark ...

pressure: 2 t distance between columns: - mm stroke: ? mm throat: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m hydraulic press 2t Drive: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TAKISAWA TCC 2100G L3 ist eine CNC Frontal-Drehmaschine für präzise Bearbeitung, hohe Genauigkeit und Zuverlässigkeit. Kapazität: UmlaufØ 420 mm, max DrehØ 320 mm, Drehlänge 291 mm; Wege Z 350 mm, X 190 mm. Techn.: Spindel 100–3200 t/min, Eilgang X 24 m/min Z 30 m/min, 3×400 V 50 Hz, 14 kVA, Gewicht ~3500 kg, Maße 2220×2214×2713 mm. Zubehör: Nebelabsaugung, elektronisches Handrad, Späneförderer, Portal-Lader. Für enge Toleranzen; Branchen: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

SERRMAC TCO 28 ist eine Ständerbohrmaschine für präzise Bearbeitung, hohe Genauigkeit und Zuverlässigkeit. Wichtige Arbeitsdaten: Tisch 325 x 325 mm, Bohrleistung in Stahl 28 mm, Spindelaufnahme MK: 3, Tisch-/Spindelnasen-Abstand 690 mm, Spindeldrehzahlen 205–2100 t/min. Technische Daten: Anschluss 3x 400 V 50 Hz, Spindelmotor 1,1–1,5 kW, Maschinengewicht ca. 400 kg, Abmessungen L1200 x B800 x H2000 mm. Erzielt enge Toleranzen; typische Einsatzbereiche: Automotive, Feinmechanik, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr

Key data: 2300 KW, 10500 V

MWM TCG 3020 V20 – 2.3 MW Gas Engine Generator Set (New) We offer a new MWM TCG 3020 V20 gas engine generator set available from stock in Europe. Technical Specifications Manufacturer: MWM Model: TCG 3020 V20 Electrical Output: 2.3 MW Voltage: 10.5 kV Year of Manufacture: 2026 Condition: New Location: Estonia, Europe Additional Availability We also have 1 unit of the MWM TCG 3020 V20 available separately in containerized execution. The units are factory-new equipment supplied with the manufacturer's warranty, offering a ready-to-deploy solution for projects requiring a compact and protected installation configuration. Upon request, we can provide: Equipment photographs Technical documentation Scope of supply / equipment configuration Commercial quotation Additional technical specifications For price confirmation, availability and ful ...

For sale is an electric reach truck (stand-alone unit) of the quality brand TCM, model FRHB 15 A 4. Thanks to its compact design, the device is ideal for high-bay warehouses and narrow aisles in warehouses. Technical data: Manufacturer: TCM Model No.: FRHB 15 A 4 Load capacity: 1,500 kg Max. lifting height: 4,000 mm (4.0 m) Drive type: Electric Operation: Stand-alone unit with clear-view mast and canopy Additional functions: push mast, sideshift / auxiliary hydraulics (3 levers) Condition: Used with age-related signs of wear and wear on the paintwork (see pictures).

Key data: 800 KW, 400 V

MWM TCG 3016 V16 Gas Generating Set Fuel: Natural Gas Scope of Supply: Containerised generator set with Engine, Alternator and Base Frame. Control room with TPEM control system and synchronisation panel. No heat recovery, no exhaust, no radiator. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

COOLING TOWER, TRUWATER, TCS250C1B FRP square cooling tower , Dimensions of 2,500 mm x 2,500 mm x 4,250 weight of approximately 2,080 kg Commercial: Mainie Harun (mainie@topglove.com.my) Noor Syaida (noor_syaida@topglove.com.my) Technical: Muhd Syahir (mhd_syahir@topglove.com.my) Nik Faris (nik_faris@topglove.com.my) Incoterm: EX WORK Currency: USD

Key data: 4300 KW, 10500 V

12X TCG2032V16 Natural Gas 4300KW 10500V 50Hz for Sale , NEW 5x TCG2032V16 Natural Gas RECON.in DE for sale in 1Q 2027 10x TCG2032V16 Natural Gas Recon. in CN for sale in 1Q 2027

Key data: 400 KW, 400 V

MWM Container Gas-CHP TCG 2016 V08 C Gas electricity and heat generator from 2013 with 65,673 operating hours, Container gas CHP unit with control, heat exchanger, silencer and cooler. 380 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: MJB 355MB4 B34, 800 KVA Manufacturer: MWM Model No.: TCG 2016 V08 C Type: Gas CHP Engine power [KW]: 415 Electrical power [KWel]: 400 Thermal power [KWel]: 480 Speed [1/min]: 1,500 Year of Make: 2013 Hours: 65,673 Weight unit [kg]: 4,660 AC Generator Marelli MJB 355MB4 B34 Manufacturer: Marelli Model No.: MJB 355MB4 B34 Type: AC Synchronous Generator Serial Number: MJB3542G01517 Power [KVA]: 800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 1,155 Speed [1/min]: 1,500 Year of Make: 2012

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 5000 mm spindle speed:: 1.6 - 315 U/min spindle motor: 75 kW spindle bore: 105 mm tailstock quill diameter: 280 mm quill stroke: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t feed: 0,18 - 160 mm/U thread - mm pitch: 1 - 192 mm thread - inch: 30 - 1/8 inch. total power requirement: - kW weight of the machine ca.: 38 t dimensions of the machine ca.: 10,7 x 2,2 x 1,9 m Fitted with: - DRO - Chuck, 1250 mm diameter - Tailstock - 2 centres - Removable grinding unit - Milling unit with ISO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 1750; Engine: Deutz TCD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 125A, 63A, 32A, 16A, Sockets: (230V) 4x 16A; Water Tank Volume [l]: 250

turning diameter: 500 mm swing dia.: 800 mm turning diameter over bed: 450 mm turning length: 800 mm x-travel: 360 mm z-travel: 980 mm spindle turning speed range: 3200 U/min max. torque on the spindle: 235/939 Nm spindle bore: 110 mm turret (x-stations): 12 control: Fanuc 31i tailstock quill taper MT: 4 total power requirement: 30 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: LBH 4,2 x 1,98 x 2,1 m - Machine with C-axis and driven tools - 2 driven tool holders - 10 static tool holders - Incl. SMW 3-jaw chuck 315BB - Measuring arm - Chip conveyor - Incl. additional high-pressure pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): . mm throat: 368 mm bore stroke: . mm feed: 0,1-6,18 m/min table surface area: 560x470 mm Thread-cutting device The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1608 KW, 2200 kVA, 400 V

We offer for sale a CHP MWM Type: TCG 2020 V16. Technical data Engine: MWM Type TCG 2020 V16 Power: 1608 kW Year of manufacture: 2018 Operating hours: 15,951 h Generator: Marelli Type: MJB 5072K33380 Power: 2200 KVA Voltage: 400 V Frequency: 50 Hz Year of Make: 2017 Operating hours: 15,951 h Scope of delivery: engine + generator on base frame, TEM control, gas section, pumps, heat exchanger and complete documents.

Key data: 1840 KW, 2300 kVA, 400 V

Two each NEW MWN TCG 3020 V12X, V16X, V20X Enclosed CHP Natural Gas Generator sets. Caterpillar/MWN TCG 3020 with Marelli Generator End for 50 Hz. applications Enclosed CHP Natural Gas Generator sets Gas Control Circuit Hydraulics Gas Components Plant Components Exhaust System with SCR Catalyst Electric Wiring Supply Air and Ventilation System Manufacturing year 2026.

Key data: 1560 KW, 1950 kVA, 400 V

One (1) Quality Use Caterpillar/MWN TCG 2020 V16, 1950 kVA, 1560 kW Continuous, 400v. 50 Hz. Enclosed, Natural Gas Generator set. DESCRIPTION: MWN- Caterpillar TCG2020 V16, 1950 kVA, 1560 KW Continuous 400v. 50 Hz. Natural Gas Generator Set Marelli Motori Generator Enclosed generator with a remote Friterm radiator (On top of container) Schneider Electric Transformer Three (3) Alfa Laval Heat Exchangers Enerkon Waste Heat Boiler Year: 2019, 4072 Hours since the last overhaul

MWM TCG 2016V12K Rated power: 469 kW Fuel: sewage gas 400/231 V, 50 Hz Operating hours approx. 33000 Marelli Generator 1200 kVA Subject to prior sale - errors possible! Internal reference number: E-1225-06

Sanding line with working width 1300 mm, constant working height. Line consisting of: - Undersander 2 sanding units 1 x Combi unit with contact roller 60° shore and segmented shoe, motor 22 kW 1 x Segmented shoe, motor 15 kW 1 x Brush Vacuum workpiece suction, 7.5 kW motor -Intermediate transport: 4200 x 1300 mm -Top sander 2 sanding units 1 x Combi unit with 70° shore contact roller and segmented shoe, 22 kW motor 1 x Segmented shoe, motor 15 kW, 1 x Brush Vacuum workpiece suction, motor 7.5 kW Feed speed: infinitely variable Table spring-loaded or fixed adjustable

USED ONLY 100 HOURS Max. Swing Diameter over Bed ~800 mm Max. Turning Diameter ~450 – 500 mm Max. Turning Length (L Version) 1,500 – 1,580 mm X-Axis Travel ~360 mm Y-Axis Travel ±60 mm (+65 / -55 mm total 120 mm) Z-Axis Travel ~1,580 mm Control System Siemens Sinumerik 840D SL (ShopTurn) Spindle Bore / Bar Capacity 110 mm Max. Spindle Speed 2,600 RPM Tool Stations 12 stations Tool Holder Type BMT 65 optional Driven Tool Stations All 12 stations can take live tooling Live Tool Speed Up to 4,000 RPM

turning diameter: 400 mm turning length: 650 mm control: Siemens 840D SL x-travel: 275 mm z-travel: 700 mm spindle turning speed range: 4000 U/min spindle bore: 65 mm turret (x-stations): 16 Pcs. VDI30 tailstock quill taper MT: 4 swing dia.: 600 mm Tools speed: 5000 U/min total power requirement: 37 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: LBH 2,5 x 1,6 x2,0 m - C-axis - 3 driven tools - 4-jaw chuck (Röhm, 250 mm) - Renishaw measuring arm - Chip conveyor - Interface for bar loader - Siemens ShopTurn - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aircooled chiller RHOSS WINPACK SE TCAESY 2110 102.5 KW Cooling capacity: 102.5 kW / 29.15 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer GSD80295VAB4-1 (scroll) + 1 pcs. Bitzer GSD80182VAB4-1 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump LOWARA, expansion vessel, buffer tank. Dimensions: 2.65x1.35x2.45 m. Weight: 1110 kg. Working hours: 10659/10659 h. Condition: Good

Ref. -No.: 10474 Manufacturer: SPINNER Year of construction: 2008 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arra ...

Ref. -No.: 10475 Manufacturer: SPINNER Year of construction: 2005 Type of control: CNC-Steuerung Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine, The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced Ultra-Clean hygienic technology, ensuring extended product shelf life and uncompromising safety., Key Performance Capabilities, - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity)., - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling., - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ide ...

Offered is a CNC turning center with automated robot loading. Workpiece feeding: Ball blanks under 120mm via rod chute, larger ball blanks via a separate singulation system at the CNC machine. Operating hours: approx. 68000h. Control system: FANUC 31i-A. Robot controller: FANUC R-30iA. Equipped with: Main spindle and counter spindle, tool turret, FANUC M-16iB 6-axis industrial robot, automated workpiece feeding, raw part hopper, rod chute for ball blanks under 120mm, separate workpiece singulation system for larger ball blanks, chip conveyor, protective enclosure for the robot cell as well as electrical documentation and circuit diagrams. Repairs carried out: 2025: New feed screw with bearing, 2021: New vacuum pump on the cooling unit, 2018: New CPU for the FANUC robot. Inspection possible by arrangement.

Centrifugal fan; Centrifugal blower Overall dimensions: 120x90x106 used, tested !

Lot consisting of NovaSignal Lucid TCD 2.0 medical system with NovaBot Automated Headset for transcranial ultrasound Doppler examinations and bilateral robotic positioning of 2 MHz transducers. The system is set up on an Ergotron/NovaSignal mobile cart. Batch composition: • Ergotron/NovaSignal cart, REF NA-ACC10, with wheeled base, adjustable column and stands, worktop, pull-out keyboard tray, monitor arm, shelves and accessory compartment. Includes NovaBot Automated Headset NA-RBT1 assembly and Type B NA-CORD-B power cord. Equipment mass: 69 kg. • Cybernet CyberMed M156S Medical Panel PC, P/N 911G590CM156S0, configured as NovaSignal Accessory Control Unit – ACU, REF NA-ACU1. 12V DC power supply, complete with external power supply. • NovaSignal wired keyboard and mouse kit for Lucid TCD, REF NA-ACC6. • Packaged Lucid TCD Diagnostic System, REF NA-TCDSYS2, including  ...

Lot consisting of NovaSignal Lucid TCD 2.0 medical system with NovaBot Automated Headset for transcranial ultrasound Doppler examinations and bilateral robotic positioning of 2 MHz transducers. The system is set up on an Ergotron/NovaSignal mobile cart. Batch composition: • Ergotron/NovaSignal cart, REF NA-ACC10, with wheeled base, adjustable column and stands, worktop, pull-out keyboard tray, monitor arm, shelves and accessory compartment. Includes NovaBot Automated Headset NA-RBT1 assembly and Type B NA-CORD-B power cord. Equipment mass: 69 kg. • Cybernet CyberMed M156S Medical Panel PC, P/N 911G590CM156S0, configured as NovaSignal Accessory Control Unit – ACU, REF NA-ACU1. 12V DC power supply, complete with external power supply. • NovaSignal wired keyboard and mouse kit for Lucid TCD, REF NA-ACC6. • Packaged Lucid TCD Diagnostic System, REF NA-TCDSYS2, including  ...

Lot consisting of NovaSignal Lucid TCD 2.0 medical system with NovaBot Automated Headset for transcranial ultrasound Doppler examinations and bilateral robotic positioning of 2 MHz transducers. The system is set up on an Ergotron/NovaSignal mobile cart. Batch composition: • Ergotron/NovaSignal cart, REF NA-ACC10, with wheeled base, adjustable column and stands, worktop, pull-out keyboard tray, monitor arm, shelves and accessory compartment. Includes NovaBot Automated Headset NA-RBT1 assembly and Type B NA-CORD-B power cord. Equipment mass: 69 kg. • Cybernet CyberMed M156S Medical Panel PC, P/N 911G590CM156S0, configured as NovaSignal Accessory Control Unit – ACU, REF NA-ACU1. 12V DC power supply, complete with external power supply. • NovaSignal wired keyboard and mouse kit for Lucid TCD, REF NA-ACC6. • Packaged Lucid TCD Diagnostic System, REF NA-TCDSYS2, including  ...

Lot consisting of NovaSignal Lucid TCD 2.0 medical system with NovaBot Automated Headset for transcranial ultrasound Doppler examinations and bilateral robotic positioning of 2 MHz transducers. The system is set up on an Ergotron/NovaSignal mobile cart. Batch composition: • Ergotron/NovaSignal cart, REF NA-ACC10, with wheeled base, adjustable column and stands, worktop, pull-out keyboard tray, monitor arm, shelves and accessory compartment. Includes NovaBot Automated Headset NA-RBT1 assembly and Type B NA-CORD-B power cord. Equipment mass: 69 kg. • Cybernet CyberMed M156S Medical Panel PC, P/N 911G590CM156S0, configured as NovaSignal Accessory Control Unit – ACU, REF NA-ACU1. 12V DC power supply, complete with external power supply. • NovaSignal wired keyboard and mouse kit for Lucid TCD, REF NA-ACC6. • Packaged Lucid TCD Diagnostic System, REF NA-TCDSYS2, including  ...

Lot consisting of NovaSignal Lucid TCD 2.0 medical system with NovaBot Automated Headset for transcranial ultrasound Doppler examinations and bilateral robotic positioning of 2 MHz transducers. The system is set up on an Ergotron/NovaSignal mobile cart. Batch composition: • Ergotron/NovaSignal cart, REF NA-ACC10, with wheeled base, adjustable column and stands, worktop, pull-out keyboard tray, monitor arm, shelves and accessory compartment. Includes NovaBot Automated Headset NA-RBT1 assembly and Type B NA-CORD-B power cord. Equipment mass: 69 kg. • Cybernet CyberMed M156S Medical Panel PC, P/N 911G590CM156S0, configured as NovaSignal Accessory Control Unit – ACU, REF NA-ACU1. 12V DC power supply, complete with external power supply. • NovaSignal wired keyboard and mouse kit for Lucid TCD, REF NA-ACC6. • Packaged Lucid TCD Diagnostic System, REF NA-TCDSYS2, including  ...

Used Unitek TCW/230 thermo couple welder Auction-ID: A1-50936-263

Lot consisting of NovaSignal Lucid TCD 2.0 medical system with NovaBot Automated Headset for transcranial ultrasound Doppler examinations and bilateral robotic positioning of 2 MHz transducers. The system is set up on an Ergotron/NovaSignal mobile cart. Batch composition: • Ergotron/NovaSignal cart, REF NA-ACC10, with wheeled base, adjustable column and stands, worktop, pull-out keyboard tray, monitor arm, shelves and accessory compartment. Includes NovaBot Automated Headset NA-RBT1 assembly and Type B NA-CORD-B power cord. Equipment mass: 69 kg. • Cybernet CyberMed M156S Medical Panel PC, P/N 911G590CM156S0, configured as NovaSignal Accessory Control Unit – ACU, REF NA-ACU1. 12V DC power supply, complete with external power supply. • NovaSignal wired keyboard and mouse kit for Lucid TCD, REF NA-ACC6. • Packaged Lucid TCD Diagnostic System, REF NA-TCDSYS2, including  ...

Equipped with: 153 HP ; Comes from a Vughts crane; working. Auction-ID: A1-47396-2508

Incl. accessories and pallet Auction-ID: A1-51519-1029