tc used for sale

- Table load sliding table 20000 Kg - Table load upper table 9000 Kg - Table out feed stroek 2100 mm - Column diamater 180 mm - Closing force 1500 Kn - Opening force 700 Kn - Laser safe CE Safety - Power 15 kW  

consisting of: - Laser welding head in aluminum case - Coaxial extension - Gas pressure reducer for welding gas supply - Operating instructions - Aluminum carrying case 5300_2 - WSweld Starter Kit Starter Kit WSweld Consisting of: 3 x Annular gap nozzle 1 x Focusing mirror 1 x Deflecting mirror 1 x ZnSe window Laser welding head TC08 Replacing the cutting head with the WSweld laser welding head TC08 expands a flatbed machine into a laser welding system. Deep penetration and heat conduction welding combined in one optic Active cooling of all optical elements Coaxial welding gas supply for perfect laser weld seams Cross-jet prevents contamination of the optics Active collision detection The WSweld laser welding head TC08 is compatible with the following machine types: TRUMPF TruLaser 3030 classic TRUMPF TruLaser 5030 classic TRUMPF Trumatic L2530 TRUMPF Trumatic L3030 TRUMPF Trumatic L3040 ...

Key data: 1200 V, 400

ZERO HOUR MWM TCG2020V12 1.2 MW Biogas Generating Set for sale. Frequency: 50 Hz Scope of supply: Engine, Alternator, Base Frame, Control Panel (TEM), Gas Line. Four boxes of ancillaries as delivered by MWM as part of factory scope of supply. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Key data: 1200 KW, 1850 kVA, 400 V

MWM TCG 2020 V12 Containerized Biogas year 2012 hours 21.000 total running hours 50hz, 1500rpm, first container -new engine is changed in 2018 second container engine year 2012 size container : 300cm wide x 320 high x 1200 long 26.000kg gensets containers are located in our yard: Kranenpool 10 6443VA Brunssum NL

Key data: 400 KW

Gas type natural gas Capacity 400 Kw Engine brand Caterpillar 50 Hz , 400 V Performance class G2 Alternator Marelli

Key data: 1200 KW, 1850 kVA, 400 V

MWM TCG 2020 V12 Containerized Biogas year 2012 hours 21.000 total running hours 50hz, 1500rpm, first container -engine is changed in 2018 second container engine year 2012 size container : 300cm wide x 320 high x 1200 long 26.000kg

Clipping machine

Key data: 280 mm, 500 mm

Turning lenght 500 mm Turning diameter 280 mm Controller Fanuc 32i 12 stations VDI30 tool holder

Key data: 4400 KW

We Offer 2x Genset TCG2032V16 .50 HZ 15000Volt Gensets,Syncron. Hours about 43500, Year of Bulding 2011 1x Genset TCG2032V16, 50HZ 6000Volt Genset, Hours about 43500, Year of Building 2011 all Service up to E40 is done from MWM ,Turbochargers E60 is done Engine in warm condition stay in a factory in europa,can visit, but no start,(have not more Gas) exposet,picture on request.

Key data: 28 mm, 300 mm

SerrMac Drill TCO 28 Manufacturer: SerrMac (Italy) Year of Make: 2002 Machine Type: Column Drill / Bench Drill Drilling diameter (max.): 28 mm Drilling depth: 150 mm Projection: 300 mm Spindle mount: Morse taper MK3 Speed ranges: 205–325–1050 / 410–650–2100 rpm (via belt drive, 2 gears) Table size: approx. 500 mm length Construction: solid cast construction Drive: Belt drive with manual feed control

Key data: 2300 KW, 11000 V

2 x ZERO HOUR MWM TCG3020V20 Generating Sets Fuel: Natural Gas Frequency: 50 Hz Scope of supply: Engine, Alternator, Base Frame, Control Panel (TEM), Gas Line, plus ancillaries. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 6000 mm centre distance: 6200 mm spindle speed:: 1.6-315 U/min tailstock quill diameter: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t steady: 3 digital readout: total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: 11x2,4x1,9 m drive motor: 75 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointmen ...

Web handling system with web guide, web cleaning, and corona treatment unit 1 screen printing unit (semi-rotary) 5 offset printing units (semi-rotary) 1 hot foil stamping unit (semi-rotary) 1 additional screen printing unit (semi-rotary) 1 embossing unit (flatbed) 1 flatbed die-cutting unit Matrix stripping and dual rewinding system Upgrade: In 2008, the flatbed embossing unit was added A complete overhaul was carried out in 2017, including full mechanical and electronic refurbishment. Replacement and upgrade of the control system to Version 3

Recon Part Number: 550 140 26 09 B1 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 31 09 B2 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 30 09 B3 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 34 01 Right side Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 27 09 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 32 09 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 140 29 09 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 33 01 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 551 142 16 01 On the turbo Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 52 54 Left Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 550 142 50 54 Right side Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Related Fillling Machine: A3 Flex, TBA8 square // Output: 7000 U/h

Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible.

Engine: TC800 Serial Number: 25132 Year of Make: 1986 Control: Sinumerik System 8. Tool holder: SK50 Travel X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallets table area: 800x800 Interchangeable pallet system Tool magazines: 60 tools Power supply: 380V 50Hz 55kW. Legal information

Engine Brand: MITSUBISHI, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 2210 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 181 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-6d24-tce2-used/ 398, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.150 kg, Type number: 6D24-TCE2

Key data: 1000 mm, 18 kN

TC120Bj. 1992 against highest bid Partially overhauled with tools Working area y1000 x2000 with resetting Bosch control with graphics programming Tool Changer 9Stations /2Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1300 mm, 22 kN

TC500Bj. 1995 against highest bid Partially overhauled with tools Working area y1300 x2500 with resetting Bosch control with graphics programming Tool Changer 20Stations /3Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1500 mm, 22 kN

TC500 Bj.1999 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1500 mm, 22 kN

TC500 Bj.1998 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Engine Brand: MITSUBISHI, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 6310 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 181 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-6d24-tce2-used/ 65, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.480 kg, Type number: 6D24-TCE2

Engine Brand: MITSUBISHI, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 181 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-6d24-tce2-used/ 66, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.490 kg, Type number: 6D24-TCE2

Engine Brand: MITSUBISHI, Conditie: RECONDITIONED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Beige , Engine Condition: Rebuild , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: No , Starter Voltage: No Starter Present , Rated Power: 181 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-6d24-tce2-recon ditioned-longblock/781, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 950 kg, Type number: 6D24-TCE2

Engine Brand: DEUTZ, Conditie: CORE, Nominal Power @ Nominal Rpm: 100 Kw, Bore: 98 mm, Stroke: 120 mm, Engine Capacity: 3600 cc, Qty Cylinders: 4 Qty, Nominal Rpm @ Nominal Power: 2300 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd3-6-l04-core/665, , = More information =, , Type: Engine, Empty weight: 410 kg, Type number: TCD3.6 L04

Engine Brand: DEUTZ, Conditie: USED, Nominal Power @ Nominal Rpm: 500 Kw, Nominal Rpm @ Nominal Power: 1900 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2015-v8-used/666, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Empty weight: 1.380 kg, Type number: TCD2015 V8

Engine Brand: DEUTZ, Conditie: USED, Nominal Power @ Nominal Rpm: 382 Kw, Bore: 132 mm, Stroke: 145 mm, Engine Capacity: 15900 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 450 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2015-v8-m-used/62 0, , = More information =, , Type: Engine, Empty weight: 1.300 kg, Type number: TCD2015 V8 M

Engine Brand: DEUTZ, Condition: CORE, Nominal Power @ Nominal Rpm: 103 Kw, Bore: 101 mm, Stroke: 126 mm, Engine Capacity: 4040 cc, Qty Cylinders: 4 Qty, Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 74.9 Kw, Rated Speed: 2400 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2012l04-2v-core/3 15, , = More information =, , Type: Engine, Empty weight: 430 kg, Type number: TCD2012L04 2V

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 120 Kw, Bore: 108 mm, Stroke: 130 mm, Engine Capacity: 4764 cc, Qty Cylinders: 4 Qty, Engine Fuel Type: diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: No Flywheel , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 129 Kw, Rated Speed: 2300 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2013l04-2v-used/8 08, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: TCD2013L04 2V; Transport weight [kg]: 470

Engine Brand: DEUTZ, Condition: CORE, Nominal Power @ Nominal Rpm: 88 Kw, Bore: 101 mm, Stroke: 126 mm, Engine Capacity: 4040 cc, Qty Cylinders: 4 Qty, Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 74.9 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2012l04-2v-mech-c ore/574, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: TCD2012L04 2V MECH.; Transport weight [kg]: 380

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 88 Kw, Bore: 101 mm, Stroke: 126 mm, Engine Capacity: 4040 cc, Qty Cylinders: 4 Qty, Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2012l04-2v-mech-u sed/737, , = More information =, , Type: Engine, Type number: TCD2012L04 2V MECH.; Transport weight [kg]: 482

Engine Brand: DEUTZ, Conditie: NEW, Nominal Power @ Nominal Rpm: 390 Kw, Bore: 132 mm, Stroke: 145 mm, Engine Capacity: 11900 cc, Qty Cylinders: 6 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 330 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd12-0-v6-new/445, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: TCD12.0 V6; Transport weight [kg]: 1128

Engine Brand: DEUTZ, Conditie: NEW, Nominal Power @ Nominal Rpm: 390 Kw, Bore: 132 mm, Stroke: 145 mm, Engine Capacity: 11900 cc, Qty Cylinders: 6 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 330 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd12-0-v6-new/420, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: TCD12.0 V6; Transport weight [kg]: 1127

Engine Brand: DEUTZ, Conditie: NEW, Nominal Power @ Nominal Rpm: 390 Kw, Bore: 132 mm, Stroke: 145 mm, Engine Capacity: 11900 cc, Qty Cylinders: 6 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 330 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd12-0-v6-new/448, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: TCD12.0 V6; Transport weight [kg]: 1126

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 360 Kw, Nominal Rpm @ Nominal Power: 1900 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 9710 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 330 Kw, Rated Speed: 1900 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2015-v6-used/4234 7, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 2.500 kg, Type number: TCD2015 V6

Key data: 1600 KW, 2300 kVA, 400 V

2G Containerized MWMM TCG 2020 V16 29.000 HOURS Year 2012 by 22.000 E60 done 400volt generator installation in the Netherlands

Volume : 1000 and 1500 ml Format : Slim

Grinding width 950 mm Ce version V400/50 1 belt combi unit design Steel roller for calibration  Grinding bug selection from the control panel Sanding shoe selection from the control panel  Sanding Pad Control On/Off FOX500KRT Electronic table positioning from the grinding table  Entrance and exit table extensions Moving carpet centering 

Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement.