tbg 620 used for sale

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 260 mm Distance between centres: 2000 mm Swing over cross-slide: 340 mm Swing over bed: 520 mm Swing in gap: 620 mm Length of the gap: 145 mm Workpiece weight on centres max.: 760 kg Spindle hole: 42 mm Taper in spindelstock metric: 50 Taper in spindle: Camlock: D6" Spindle speeds: number (steps): 13 from: 20 rpm up to: 1800 rpm Pitch of leadscrew: 6 mm Steep thread transmission: 6:1 Taper in tailstock:: 5 MT Spindle diameter: 80 mm Spindle stroke: 200 mm Feeds: length: from: 0.045 mm/r up to: 2.52 mm/r Frontal: from: 0.003 mm/r up to: 1.75 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3740 mm Width: 1300 mm Height: 1600 mm Various accessories: Face plate diameter: 550 mm 3-jaw chuck diameter ...

RECON Part number: 1228 1076 cooled piston pin ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Setting range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roll drive Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece glass 90 x 110 mm white 1 piece protective glass 90 x ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Operating hours: 171812 Technical data Working table: Length: 950 mm Width: 620 mm Max. dimensions of work piece: Length: 1260 mm Width: 690 mm Height: 360 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 630 mm Cross traverse (Y-axis): 400 mm Vertical travel (Z axis): 160 mm U/V axis travel: +/-48 mm Resolution: 0.05 µm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.05 mm up to: 0.33 mm Dielectric aggregate: Contents: 240 l Voltage 50 Hz 3x: 400 Volt Total power required: 15 kVA Machine´s weight about: 4100 kg Overall dimensions machine: Length: 2660 mm Width: 2610 mm Height: 2370 mm Various accessories: CNC control Automatic wire treading

RECON Part number: 1202 7073 / 3.601.0.170.601.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

High capacity oil cooler, Schimpke prod., type DK68V / 50, 6200 kcal/per hour, oil Durchflus 36 - 51Ltr rpm installation _ compressor, fan, .uber filters extraction.

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 415 B Technical data Drill capacity in steel: 25 mm Threat cutting in steel M: 16 Milling capacity: 100 cm3/min Taper in spindle: SF32 Spindle speeds: from: 50 rpm up to: 10000 rpm Table length: 885 mm Table width: 320 mm Distance of the T-slots: 50 mm T-channel width: 12 mm Number of T-channels: 5 Table load max.: 250 kg Height of table above floor: 1040 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 500 mm Transversal travel: 250 mm Vertical travel: 145 mm Feeds: X axis: 1 - 11000 mm/min Y axis: 1 - 11000 mm/min Z axis: 1 - 6000 mm/min W axis: 1 - 3600 mm/min Rapid traverse X: 11 m/min Rapid traverse Y: 11 m/min Rapid traverse Z: 6 m/min Voltage 50 Hz 3x: 400 Volt Power: 7 kW Total power required: 16 kW Machine´ ...

Qty 1 x Carter MK6 direct drive Banbury internal mixer, Serial no. 237/11 (New chamber/hydraulic hopper in 2011/12), Hydraulic hopper, Chamber volume: 160L, 2 wing rotors, SSA type dust stops, hydraulic drop door with linear actuator, pneumatic oil injector fitted to end frame, hydraulic hopper, PIV semi unidrive gearbox (28:1 ratio), 310/620kW power rating, 728/1484rpm input speed, 26/53rpm output speed. Currently fitted with fixed speed motor fitted - 355kW, 744rpm to give rotor speed 26.5rpm. Complete with lubrication unit, hydraulic unit, electrical controls etc and in very good condition (inspection report carried out by Farrel available on request).

- max. Arbeitslänge 6200 mm - max. Arbeitshöhe 1300 mm - min. / max. Werkstückdicke 10 / 150 mm - 12 vertikale Hydraulikzylinder dm 80 mm - 12 horizontale Hydraulikzylinder dm 40 mm - 2 seitliche Öffnungszylinder dm 63 mm - Motorleistung Hydraulikaggregat 5,5 kW / 400 V - Abmessungen L=6600, B=1650, H=2250 mm - Gewicht 5000 kg

effort 250 ton stroke 315 mm slide adjustment 160 mm distance slide- table 800 mm die height 555 slide 620x950 mm table 800x1180 mm 28 kW Total weight 25t

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 34925 Technical data Pressure: 60 to Stroke: (stepless) from: 70 s/min up to: 800 s/min Execution: 4 supports Table surface: Length: 770 mm Width: 620 mm Thickness: 120 mm Table relieving: Length: 580 mm Width: 100 mm With pressing power: downside up Slide adjustment: 80 mm Stroke adjustment: from: 20 mm up to: 76 mm Slide clamping surface: Length: 700 mm Width: 456 mm Passage between the supports: longitudinal: 650 mm Lateral: 260 mm Air connect: 6 - 10 bar Voltage 50 Hz 3x: 400 Volt Total power required: 41 kVA Machine´s weight about: 7600 kg Overall dimensions machine: Length: 2600 mm Width: 2100 mm Height: 2200 mm Various accessories: Belt feeding: SOPREM Workpiece conveyor Sound insulation cabin Chip conveyor

Dimensions: L 620 mm x W 330 mm x H 1520 mm Drive: 2,2 KW Speed: 18000 RPM Grinding Chamber diameter: 130 mm Width: 40 mm medium air flow rate: about 2-4 m ³/min. Capacity: from 1 to 50 kg / h-> depending on the material and desired fineness.

Type 6202RS Thread diameter 8 mm Wheel diameter 43 mm Wheel width 15 mm Total length 40 mm

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 680 mm Max. Longitudinal travel: 620 mm Max. transversal travel: 45 mm Grinding wheel: Diameter: 500 mm Width: 80 mm Bore: 203.2 mm grinding wheel width: 80 mm Grinding wheel speeds: number (steps): 3 from: 1150 rpm up to: 1550 rpm Angular displacement: 3 ° Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle taper:: 4 MT Taper in tailstock:: 3 MT Spindle stroke: 20 mm Shearing force: 4 - 15 kp Table angular displacement: 9 ° Table speed: stepless up to: 5 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 5.5 kW Workhead spindle motor: 0.7 HP Total power required: 10 HP Machine´s weight about: 2900 kg Overall dimensions machine: Length: 2300 mm Width: 1800 mm Height:  ...

Manufacturer: Mc INTYRE Blade length: 150 mm Blade opening: 105 mm Cutting capacity: 25 tons Rods ST 37: 25 mm diameter Number of strokes at ¼ opening: 20 / min Number of strokes at ½ opening: 12 / min Number of strokes at full aperture: 9 / min Dimensions (L x W x H): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Control: foot pedal

Reconditioned & ready to install Set of cylinder heads for MWM TBG620 Rebuilt with all original MWM parts Currently in stock and available subject to prior sale. Email for price and photos

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN Technical data Number of axis total: 5 Spindle nose:: SF 32 Drill capacity in steel: 30 mm Milling capacity: 100 cm3/min Spindle stroke: 180 mm Spindle speeds: from: 50 rpm up to: 9200 rpm Table length: 1230 mm Table width: 410 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 700 mm Transversal travel: 315 mm Vertical travel: 495 mm Feeds: 1 - 900 mm/min Rapid traverse:: 4 m/min Voltage 50 Hz 3x: 380 Volt Power: 16 kW Machine´s weight about: 3200 kg Overall dimensions machine: Length: 2500 mm Width: 2500 mm Height: 2450 mm Various accessories: Dividing attachment 4th axis: AT 100 CNC AC-L Coolant system Lamp

Manufacturer: Imes-Icore Type description: iCUTwater ECO Year construction: 2017 Working range: 620 x 1000 mm cutting plugs: 1 2D / 2 1/2 D or 3D: 2D Operating hours: 20 Installation mass: Dimensions 2150 x 16 15 x 1964 Power: 7.5 kW Connection power: Bar: 1500 bar fuse in amper: 32 Aoperating hours: 20 pump integrated direct driven built-in pump Tilo Klett with 1500 bar/ 2 l/min and cutting head Allfi Type X, Sand wheel feeder type Jetcut, integrated sand stockpile 25kg. Designed for focusing tube 0.90 mm and Duese 0.30 mm. Incl. control software and post processor on the machines Notebook. ; ready to use

Properties Used MULTI PANEL Simatic dimensions: Total height with monitor: 1,620 mm Height without monitor: 1,100 mm Control cabinet Height: 500mm Width: 540mm Depth: 240mm > b > monitor Height: 310mm Width: 400mm 1 STK. in stock

Te Koop: Alfa laval Tetra Pak Type CLIP 8-RH 1999 Bouwjaar Voor meer informatie kunt U bellen of mailen. Email: wh.derikx@gmail.com. Phone. +31 620758459 De nu kopen prijs is excl. 21% btw.

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 150 mm Distance between centres: 680 mm Grinding wheel right and left hand Max. Longitudinal travel: 620 mm Grinding wheel: Grinding weehl left side: Diameter: 350 mm Width: 50 mm Bore: 127 mm Grinding wheel right side: Diameter: 250 mm Width: 25 mm Bore: 127 mm Grinding wheel speeds: number (steps): 3 from: 1640 rpm up to: 2300 rpm Hydraulic cross travel: 0/1.2 mm Angular displacement: -45/+90 ° Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle taper:: 4 MT Taper in tailstock:: 3 MT Table angular displacement: +/-8 ° Table speed: stepless from: 0 m/min up to: 5 m/min Mini. auto. longitudinal travel: 0.001 mm Voltage 50 Hz 3x: 400 Volt External Grinding wheel motor: 3 kW Machine´s weight about: 2600 kg Overall  ...

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 200 mm Distance between centres: 280 mm Max. grinding diameter: 200 mm Grinding-wheel diameter: 125 mm Taper in spindle:: 5 MT grinding spindle: Longitudinal way of table: 150 mm Transversal way of the table: 140 mm Slewing range of grinding head: horizontal: 90 ° vertical: 90 ° Grinding spindle speeds: number (steps): 3 from: 4500 rpm up to: 7100 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3 HP Machine´s weight about: 560 kg Overall dimensions machine: Length: 620 mm Width: 500 mm Height: 1500 mm Various accessories: Set of collets Set of grinding wheel arbors 6-jaw chuck diameter Cylindrical grinding attachment Set of grinding wheels Lamp Tool cabinet

Plasma extraction and filter system Filter BLOC TFK PL Series special central suction and filter unit for plasma smoke when burning and cutting the FILTER BLOC TFK PL series and CQC certified manufacturer according to ISO 15012 and CE drawing FILTER BLOCK - TFK PLASMA 40/60/80 Motor power 5,5 / 7,5 / 11 KW air volume 4000/5500/6200 m3 / h 124/186/248 m2 filter surface dust container 4x/6x/8x 84 liters Automatic jet cleaning system with testing for welding fume category W3 24 Months Warranty The price refers to the TFK PL 40 for further information on request; ready to use

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 407/415 Operating hours: 39000 Technical data Spindle nose:: SF 32 Drill capacity in steel: 30 mm Threat cutting in steel M: 24 Milling capacity: 100 cm3/min Spindle stroke: 180 mm Spindle speeds: from: 50 rpm up to: 9200 rpm Table length: 1230 mm Table width: 410 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 700 mm Transversal travel: 315 mm Vertical travel: 495 mm Feeds: 1 - 900 mm/min Rapid traverse:: 4 m/min Voltage 50 Hz 3x: 380 Volt Power: 16 kW Machine´s weight about: 3200 kg Overall dimensions machine: Length: 2500 mm Width: 2500 mm Height: 2450 mm Various accessories: Dividing attachment 4th axis with teilstock 3-jaw chuck diameter: 160 mm Collet device Set of toolholders Handwheel electroinic Touch Prob ...

Marcel Spiedo 1200 Machine Spiedo 1200 produces a high quality product which is kebab. The skewers are perfect in every way, ensuring high quality and handmade appearance. The machine is equipped with two drums to load meat, receiving the tape (200 mm) trolley for example: the additional tools (1750 x 690 x 620 mm) Specification: Brand: Marcel Spiedo Model: 1200 Unit size: 1490 x 1050 x 2600 (mm) Weight: 500 kg Power supply: 400V 50 Hz 3N Total power: 0.5 kW Made of stainless steel

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 75960 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Table load max.: 800 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 750 mm Vertical travel (z axis): 620 mm Dimension of the workpice: Height: 550 mm Diameter: 500 mm Table divisions (B): 0,001° ° A axis: 145° (+35/-110°) Table speed: 30 rpm Pallets:: System Staflex number: 4 Length: 500 mm Width: 500 mm Transport weight: 200 kg Tool changer: Number of tools: 60 Tool diameter max.: 120 mm Diameter with free adjacent pockets: 200 mm Tool lenght: 400 mm Max. tool-weight: 15 kg Spindle nose:: HSK-A 100 Spindle speeds:: STEP TEC stepless up to: 12000 rpm Torque max ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 150 mm Distance between centres: 680 mm Max. Longitudinal travel: 620 mm Grinding wheel: Diameter: 350 mm Bore: 127.0 mm grinding wheel width: 50 mm Grinding wheel speeds: number (steps): 3 from: 1640 rpm up to: 2300 rpm Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle taper:: 5 MT Taper in tailstock:: 3 MT Table angular displacement: 8 ° Table speed: stepless up to: 5.0 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 4.0 HP Total power required: 6.8 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2700 mm Width: 1800 mm Height: 1900 mm Various accessories: Digital readout number of axis:: 2 Manufacturer: Tschudin Checkomatic Paper filter facility Sparking-out attachment La ...

Manufacturer: Imes-iCORE Type designation: iCUTwater ECO Year of constr.: 2017 Work area: 620 x 1000 mm Die heads: 1 2 1/2 D, 2D or 3D: 2D Hours of operation: 20 Dimensions: Dimensions of 2150 x 1615 x 1964 Power: 7,5 kW Power supply: Bar: 1500 bar Hedging in Amper: 32A Hours of operation: 20 Integrated pump directly driven built-in pump "Tilo Klett" with 1500 bar / 2 l / min and cutting head Allfi X-type, sand Raddosierer type Jetcut,. integrated reservoir sand 25 kg. Designed for Fokusierrohr 0,90 mm and nozzle 0.30 mm. Incl. control software and post processor on the machines notebook.

Table size: 1000 x 490 mm traverse path x/y/z: 800/510/500 mm spindle retainer: ISO 40 ISA kl. / gr. Table/spindle distance: 120/620 mm spindle speeds: 40-6000 rpm number of tool stations: 22 pieces feeds: x/y 1-3200 / z 1-2000 mm / min rapid traverse: x/y 1-3.2, z 1-2 m / min. Supply: 380 V, 19 kW space: 2850 x 2150 x 2600 mm weight: 3800 kg

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 680 mm Max. Longitudinal travel: 620 mm Grinding wheel: Diameter: 350 mm Bore: 127.0 mm grinding wheel width: 50 mm Grinding wheel speeds: number (steps): 3 from: 1640 rpm up to: 2300 rpm Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle taper:: 5 MT Taper in tailstock:: 3 MT Table angular displacement: 8 ° Table speed: stepless up to: 5.0 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 4.0 HP Total power required: 6.8 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2700 mm Width: 1800 mm Height: 1900 mm Various accessories: Internal grinding attachment swivellable: Spindle speeds: 50 rpm Coolant system Paper filter facility Sparking-out att ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 18i-TB Operating hours: 9976 Technical data Number of axis total: 5 Swing over bed: 620 mm Turning diameter: 380 mm Bar passage: 52 mm Turning length: 540 mm Longitudinal travel (Z-axis): 600 mm Longitudinal travel (X-axis): 217 mm Transversal travel (y-axis): 101.6 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 12 Spindle speeds: 4000 rpm Power of driven tools: 5.5 kW Spindle nose: Inner cone diameter: 40 mm Taper in spindle: Camlock: A2-6" Collet bore: 52 mm Spindle speeds: stepless up to: 4500 rpm Back spindle:: A2-5" max. speed: 6000 rpm Spindle diameter: 45 mm Power of back spindle: 11/15 kW Rapid traverse:: 30 m/min Time under power: 13221 Hour Working time: 8781 Hour Voltage 50 Hz 3x: 400 ...

RECON Bosch Starter for MWM 620 V12 Part number: 0116 2640 / 1204 1381 Bosch number: 0 001 510-003 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Turning machine Tip height 150 mm Tip width 650 mm 2 speeds Flat disc diameter 240 mm Electricity connection luminous flux Dimensions 1230 mm x 620 mm x H 1620 mm

No. 4293: 1 gebr. Universal tool milling machine Fabr. EPPLE, type UFM 100 Digi,. Bu. 2004 with 3-axis digital display ARB.-ber.: 620 x 250 x 440 mm, Accessories: table 1120 x 260 mm Universal milling head Other: Spinedel SK 40 Spindle speed 40 - 1600 min-1 Weight 1600 kg

Bread-long-wire Kemper IL Special / 620cm Long -Bread long-making machine from Kemper -Type IL- Special -Machine length approx. 620 cm -with 3 pieces flour spreader -400 volts

1.1. Tacchi turning lathe Model DB 1900 x 10.000 Series 132 L • CNC Sinumerik 840 DE-SL • Centre height from the ways 1,900 mm • swing over saddle 3,050 mm • Swing over bed, without telescopic covers 3,300 mm • max. work piece weight 40,000 kg • Min. and max. distance between headstock and Tailstock without steady rests 500 – 10.000mm • Main headstock o Diameter face plate 3.000 and additional 1.000mm o Integrated C-Axis o Drive power S1 (100%) 95 kW o Range of spindle speed 1 – 400 rpm o Number of speed ranges 3 o torque 80,000 Nm o Spindle nose DIN 55026 20" o Spindle hole 160mm • Tailstock o Quill diameter 450mm o Quill stroke 200mm o Internal taper Metric 100 at 60° • Equipment o 12-position live tool turret  Station diameter VDI 620mm  Power 18.5 kW  Max torque 400 Nm  Max speed 1,500 rpm o Y-axis  Vertical  ...

Chamber filter press SCHENK with pressure via hydraulic with motor Type: KFP 620/ 30H No.: 352 Year of construction: 1979 Working pressure: 12 bar Measurements and Weight: Height: 1950 mm Length: 2900 mm Width: 1100 mm Weight: kg Filter plates: 20 x filter plates 600 x 600 mm Depth: 550 mm 2 x filter plates Depth: 850 mm

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Tool presetter Zoller V 520 manufacturer: Zoller type: V 520 year of construction: 2000 comm.-nr.: 0200/133/083/0416 stock-nr.: 1909 + Regular Price: 3.850,- € > Reduced Price: 1.925,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) Measuring area X-Axis: 210 mm Measuring area Z-Axis: 620 mm (tower height 800 mm) tool reception: SK 50 / 0300106 / Z=+20.000 current: 220 V / 50-60 Hz weight: ca. 400 kg standing area: W 1,40 x D 0,70 x H 1,90 mm voltage: 220 V / 50 Hz weight: ca. 350 kg standing area: W 950 x D 1005 x H 1600 mm features Digital measuring device Heidenhain” in X+Z Manual f ...

Good, complete Plansifter Buhler MPAG 820 on sale! We offer different designs and features. Sieve box 1.85 m, 22 screens Top and bottom plate of the drive box extendend for additional sieve stack. 8 passages (5 x sieve stack with slatted frames 570 x 500 as good as new, 3 x NOVA 620 x 570 without frame inserts and cleaner in good condition) Ask us for more details! We are sure to make you an attractive offer.

Height under guides: 0 mm Throat: 0 mm Table length: 0 mm Table width: 0 mm Semi automat electrohydraulic double column Two column construction Perfect rigidity and accurate with fine cut Cutting 90°:       600Ø Cutting flat 90°:  600 x 600 mm Cutting speed Vario:10 - 115 m/min. Circle blade size: 6200 x 51 x 1,3 mm Power:             4kW Length:            3.150 mm  Width:             1.260 mm  Height:            2.250 mm  Weight:            1.750 kg 

Gr. Grinding length: 620 mm gr. Grinding width: 250 mm table size: 200 x 620 mm grinding wheel dimensions: 200 x 220 x 51 mm Electr. Supply: 380 V, 1/1.8 kW space: 1650 x 1450 x 1800 mm weight: 1350 kg

Holke PK050A column hole. Drilling capacity: 50. Table: 620x520mm. Speeds: 9 (54-1032rpm).

Spindle diameter: 50 mm Cross X: 1985 mm Vertical Y: 1620 mm Table length: 1600 mm Table width: 1400 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Heidenhain CNC Model: TNC 155 UNION - BFT 110 / 7 Horizontal borer Ø 110 X 1985 Y 1620 Z 1960 W 710 mm MACH - ID 6417 Make: UNION Type: BFT 110 / 7 Control: Heidenhain TNC 155 YOP: 1987 X – Travel:              1.985mm Y – Travel:              1.620mm Z – Travel:              1.960mm W – Travel:              710mm Table Length:            1.600mm Table Width:             1.400mm Table load:              6.300kg Speeds / ranges:         1250Rpm P ...

Table length: 620 mm Table width: 350 mm Longitudinal X: 450 mm Cross Y: 350 mm Vertical Z: 300 mm Positions ATC: 10   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 430 X – Travel:              450mm Y – Travel:              350mm Z – Travel:              300mm Table Length:            620mm Table Width:             350mm Table load:              350kg Feed rate X-Axis:        30.000mm Feed rate Y-Axis:        30.000mm Feed rate Z-Axis:        30.000mm Spindle Taper:           40ISO/Bt/Mk Power on spindle:        12kW Speeds / ranges:    & ...

We offer a generator set in a container with DEUTZ (MWM) engine - TBG 616 V12K. Engine is completely overhauled. Electrical power - 450 kW Built - 2001 Engine hours - approx. 63000 Bh Control - a new (approx. 2000 Bh) - Deif The complete CHP can be prepared and delivered at short notice. Without unit certificate!

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Adjustment range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll of welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protecti ...

AVIAN Engineering Model G46/ 60 Pinch Infeed Rollers Integral Blower Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs ThruPut 300 KG/H Cutting Chamber 620 x 460mm Hopper Opening 620 x 500mm

New machine 24-month warranty Benefits: + TOP value for money + robust dough divider with 2 fixed wheels for quick, easy transport of the dough divider + Stainless steel version + Cutting & punching grilles are easy to replace + Punching grille: profiled POM plastic knife, food-safe, for excellent sealing of the dough + Artisan, traditional sharing and moulding of the dough possible + pull-out bracket for the dough part tub + in the device can be accommodated max. 4 grid inserts + space-saving, finds space even in the smallest bakery + no power connection required, maintenance-free + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: + 1x stainless steel grid insert (see PDF / product information) + 1x stainless steel insert with POM knife (1-fold division, see PDF / product information) for dough-gentle punching of very soft  ...

Table clamping area: 310 x 1400 mm Table movement x: 950 mm Table movement y: approx. 325/345 mm Table movement z: approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds longitudinally and transversely: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min electr. Connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

Robust, high-quality beading and flanging machine with electric motor drive, optionally available with hydraulic bending roller delivery - optionally available with circular cutting device Largest sheet thickness, which is malleable - 3 mm steel sheet/ST40, maximum extension 450 mm, maximum distance between the top and lower roller 100 mm, two working speeds 6 and 33 rpm - available at additional cost with infinitely adjustable working speed and frequency converter, Time relay for limiting the working cycle, possible round diameter when using the circular cutting device between 300 mm and 1,200 mm (optional up to 1,620 mm), cutting power with the shear blades 3 mm steel sheet/ST40, drive power 1.8 kW – drive power hydraulics 1.5 kW, weight of the base machine 570 kg