127,864 used machines on RESALE, but how to find them? Machine Search
Balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Tecna, spring balancer type 9312 -Load capacity: 1 - 2 kg -Rope length: 1600 mm -Number: 1x spring balancer available -Dimensions: 200/110/H55 mm -Own weight: 0.6 kg
Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid, support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail -Support rail: length 925 mm -Support width: 130 mm -Dimensions total: 935/265/H80 mm -Weight 17.8 kg
BARCODE PRINTER / LABEL PRINTER WITH COLOR RIBBONS Config. No.: 096-104-00404 // Ser. No.: 9056423 Equipment / Additional information: Maximum Print Area: Width: 3.4”/86mm Length (with standard memory): 39”/991mm Resolution: 300dpi/12dots/mm Maximum Print Speed: 8”/203mm per second Label and liner width: 0.79”/20mm– 3.54”/90mm Ribbon width: 0.79”/20mm– 3.4”/87mm
Fully automatic palletizing system NPS900 Fully Automatic Stretch Winding Machine GL 200, Good Condition
Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys -Transport trolley: with steel plate -Platform: 900 x 900 mm with hole Ø 50 mm -Design: 2x swivel castors with brake, 2 fixed castors -Load capacity: kg -External dimensions: 900/900/H255 mm -Own weight: 62 kg
turning diameter over bed: 950 mm turning diameter over slide rest: 569 mm turning length: 2200 mm spindle bore: 90 mm faceplate: 800 mm steady: 500 bed width: 580 mm Rapid travel: turning speeds: 800 U/min digital readout: stepless reg. with elect. turning speeds: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 650 mm -Length: 9.5 m -Transport dimensions: Ø 250 x 650 mm -Weight: 22 kg
Safety relay, safety control, emergency stop switch, switching device, undervoltage relay, safety switching device -Manufacturer: Dold, safety relay undervoltage relay -Type: AA 9943.12 -Number: 1x relay available -Dimensions: 115/45/H80 mm -Weight: 0.3 kg
Rear weight, forklift weight -Manufacturer: Clark, tail weight -Recording/Dimensions: see photos -Transport dimensions: 1110/1000/H650 mm -Weight: 1900 kg
Electric motor, three-phase motor, pulley motor -Manufacturer: Birkenbeul, electric motor Ty AP 90S4 -Power: 1.1 kW -Speed: 1430 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Protection class: P 33 / IP 44 -Dimensions: 300/265/H180 mm -Weight: 20.7 kg
Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 39.99 mm -Mounting: SK40 -Shaft: R=19.995 / L=219.014 mm -Dimensions total: Ø 65 x 314 mm -Weight: 2.8 kg
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 3 t clamping width: 3000 mm total power requirement: kW weight of the machine ca.: 0,110 t dimensions of the machine ca.: 3x0,3x0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t stroke: 10-80 mm no. of strokes: 240 Hub/min ram - range of adjustment: 80 mm table surface area: 850x600 mm ram surface: 760x550 mm hole in the table: 850x130 verstellbar mm table height: 1100 mm tool hole in ram: Ø 50 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: BxTxH: 3000x2000x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cable bridge, drive-over protection, hose bridge, cable duct -Cable bridge: overrun protection -Channel width: 20 mm -6 mounting recesses -Quantity: 1 piece available -Dimensions: 985/150/H30 mm -Weight: 4.2 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 910 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without key -Weight: 51 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 955 mm -Depth: 440 mm -Height: 1950 mm -Door: lockable, without key -Weight: 66 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 910 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without key -Weight: 52 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 shelves -Width: 935 mm -Depth: 410 mm -Height: 2010 mm -Door: lockable, without key -Weight: 59 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 950 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 84 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 935 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without a lap -Weight: 78 kg
Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder -Reel: with 3 retaining brackets -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos -Dimensions: Ø 950 x 410 mm -Weight: 35 kg
Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters, load break switches, terminal blocks, load disconnectors, fuse load disconnectors -Manufacturer: Rittal, OM adapter -Type: SV 9340.460 -Quantity: 1x adapter available -Dimensions: 70/55/H210 mm -Weight: 0.3 kg
Built-in control unit, control cassette, controller, bus controller, bus module -Manufacturer: B&R, Control unit controller -Type: X20 BC 0043 C01 -Power feed module: X20 PS 9400 -Number: 1 module available -Dimensions: 105/40/80 mm -Weight: 0.1 kg
Geared motor, electric motor, electric geared motor -Speed: 3/25 rpm -Power: 0.07/0.55 kW -Brake -Design: B14 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 38 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 7.5 kW -Output: 133 V 200 Hz -Power: 10 kVA -for edgebanders, edgebanding machines -Weight: 180 kg
-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H930 mm -Weight: 82 kg
-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H800 mm -Weight: 82 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 4 kW -Output: 380 V 100 Hz -Power output: 8 kVA -for edgebanders, edgebanding machines -Weight: 120 kg
Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece
Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 17300 rpm at 300 Hz -Shaft mounting: Collet Ø 12 mm -Dimensions: 340 x 110 x H150 mm -Weight: 10 kg
Reflective light barrier, light barrier -10-40 V DC Price: per piece -Quantity: 5 available -Weight: 0.3 kg
geared motor electric motor -Speed: 30/50 rpm -Power: 0.22/0.9 kW -Design: B3 angle -Shaft diameter: Ø 38 mm -Protection class: IP 65 -Dimensions: 760/250/H400 mm -Weight: 65 kg
Wood milling inserts, knife inserts, form milling inserts -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 7.5mm -Price: complete -Weight: 0.8kg
Wood router bit inserts, knife inserts, form cutter inserts -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 15 mm -Price/Sale: complete -Weight: 0.9 kg
Wood milling inserts, knife inserts, form milling inserts -Blade width: 40 mm -Blade thickness: 2 mm -Price: complete -Weight: 0.3kg
Cutting device, pneumatic press, punch -Type: 290 908 -Max. pressure: 8 bar -Dimensions: 300/340/H270 mm -Weight: 25 kg
Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNG-50 TN 32 970 -Quantity: 12 pieces available Price: per piece -Weight: 0.3 kg/piece
Cable protection ring -Type: KSR-915 Light Grey Price: per package -Number: 7 available -Weight: 1.6 kg
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 1:10 -Speed: 143 rpm -Engine: Type Y2-90S-4 -Power: 1.1 kW -Protection rating: IP54 -Shaft: Ø 28 x 110 mm -Dimensions: 440/220/H260 mm -Weight: 24 kg
- Cambia filtro automatico Nordson EH-35 - Materiale lavorato: PP / PE
VALVOLA IDRAULICA - ARBURG Tipo: 163789 WE10DA 91A G2 40-GO
maximum number of results exceeded
please refine your search
