tba 9 used for sale

Powder curing furnace 3,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 58 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

starter -Manufacturer: Bosch starter motor type 0 986 011 140 -Voltage: 12 V -Teeth: 9 -Solenoid coil: Type 0331402503 -Dimensions: 290/190/H115 mm -Weight: 11 kg

Powder curing furnace 3,500 x 1,900 x 2,000 mm gas operation 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 58 kW = 49,880 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc. stove is heated by gas burner. 15 Exhaust air 1 pc device for exhaust air pipe, m ...

Adjustable traverse, crane traverse, indoor crane, crane hook traverse, load traverse, heavy-duty traverse -Crane traverse: heavy-duty traverse -Carrier: IPB 550 / HEB 550 -Dimensions: see photo technical drawing -Transport dimensions: 7220/920/H1015 mm -Own weight: 2100 kg

Powder curing furnace 4,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 4,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m³/h 10 electric motors 2 pcs 2x 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 74 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air ...

Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg

PLC controller, connection module for digital electronic modules, terminal module, repeater -Manufacturer: Siemens, RS 485 Repeater -Type: 6ES7 972-0AA01-0XA0 E status: 9 -Dimensions: 60/45/H120 mm -Weight: 0.3 kg

Clamping plate, welding table, welding table, straightening plate -Clamping plate: Directional plate with base frame, solid design -Clamping surface: 960 x 955 mm -Table height: 730 mm -Transport dimensions: 960/955/H745 mm -Weight: 631 kg

grinding diameter: 0/ mm grinding length: 960 mm feed in: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0/ m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Siemens, Simatic S 5 fan assembly from Demag D 100-275 NC injection molding machine -Type: 6ES5 981-0 HA 11 -Voltage: 230/115V -Dimensions: 490/175/H265 mm -Weight: 2.9 kg

Key data: 970 mm, 2200 mm, 500 1/min

Control Fanuc OiTD Centre Distance 2,200 mm Max. swing over bed 970 mm Max. Swing over Cross Slide 720 mm Max. Turning diameter 850 mm Spindle Bore Ø 230 mm R.P.M. 500 kW 37 Volts 400 Cycles 50 Including: 4-Jaw chuck, Ø 800 mm rear Pneumatic 3-Jaw chuck, Ø 600 mm front

Product number: 3054 Type: 9000 Serial number: 119 Year of construction: 1995 Cutting width: 520 mm Belt width: 480 mm Power: 3 x 380V, 50Hz, 1.5kW Dimensions: 2150 x 900 x 1350 mm Weight: 400 kg

Height 1700 mm Width 1600 mm Length 2300 mm Capacity 300 l Power supply: 400V 50Hz 3N Total power 106 kW Main Material Stainless steel, acid-resistant Cutter Type Bowl Cutter Cutter design Stainless steel, acid-resistant Number of knives on the head 6 pcs.

Key data: 1000 mm, 25

Hofler Rapid 900 CNC form wheel gear grinder Year: 2003 installed 2004 This universal CNC form wheel gear grinder is a great job shop machine it can be inspected in plant under power . Machine is equipped complete with all necessary items to run this machine in your facility Machine specifications Max tip diameter of workpiece 1000 mm Max root diameter 50 mm stroke length 650 mm max workpiece height under tailstock 1960 mm profile height 41 mm Module 1-25 mm Helix angle +/- 45 deg Max grinding wheel diameter 400 mm Min wheel diameter 200 mm grinding wheel width 60 mm grinding spindle motor 13.5 Kw Grinding spindle speed range 1- 4000 RPM Dressing roll diameter 160 mm dressing roll spindle speed range 1-540 ...

Key data: 846 KW, 950 kVA, 400 V

Currently we offer a: Power Generator MWM / Deutz Type: TBD 616 V16 Power 846 KW / 950 KVA Generator AVK Type: DSG62L2-4 400 volts RPM 1500 IP 23 Built in 1999 Hours: 6225 Without control cabinet You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Contactor, semiconductor contactor, contactor, power contactor, time relay, motor contactor, auxiliary contactor -Manufacturer: Dold, time relay energized with delay, unused in original packaging -Type: MI 907 -Voltage: AC50Hz 230V 0.05-1s -Dimensions of box: 130/85/H40 mm -Weight: 0.1 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor -Type C7219-9012K -Shaft: Ø 5 x 18 mm -Dimension: 67/42/H42 mm -Weight: 0.3 kg

Perforation - Scoring - Slitting System Rollem Champion 990 with Eurofold Year 1994 - Serial-No. E1088/530 Perforation - Scoring - Slitting System Arbeitsbreite / Working width max 470mm Flachstapelanleger EUROFold / with Flatpile Feeder EUROFold Stufenlose Geschindigkeitsregelung / stepless speed regulation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Balancer, machine balancer, spring balancer, cable extension, weight balancer -Manufacturer: Tecna, spring balancer type 9181 in original packaging -Load capacity: 10 - 14 kg -Rope length: 2500 mm -Quantity: 2x spring balancer available -Price per piece -Dimensions of cardboard: 270/200/100 mm -Net weight: 3,8 kg

Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet for bending tools, dies, upper knives, upper tools, straight tools -Tool cabinet. Drawer cabinet, sturdy design -2 drawers/3 shelves: layout/height see photos -lockable: with 1 key -Dimensions: WTH 640/930/H1215 mm -Weight: 177kg

Shell end milling cutters, milling cutters, milling cutters, shell milling cutters -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Fensterfalztasche - Altarfalztasche - Gateway Buckle Stahl für K/T 94er with deflector with control box Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Transnorm roller curve combination right and left 45°-1200-900-800 IR800 1551 mm RA2232 Make: Transnorm Running direction: Curve combination clockwise/anticlockwise Roller width (RB): 800 mm conical, plastic coating Nominal/outer width (NB): 900 mm Inner radius (IR): 800 mm Center section length: 1200 mm Offset: 1551 mm Frame height: 80 mm Overall height including motor: 450 mm Drive/transmission: Chain Electrical data: 300-500 V, 0.37 kW Gear motor: SEW, R17DT71D4/TH Conveying speed: please contact us Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Nomina ...

axial fan, fan, exhaust, fan wheel, fan blades, fan blades -Fan wheel: fan blades for exhaust fans -Diameter: 900mm -Receptacle: Ø 38 mm -Quantity: 9x fan wheel available -Price per piece -Dimensions: Ø 900 x 85 mm -Weight: 16 kg/pc.

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: commission trolley -Chassis: 4 swivel castors -Dimension: 1515/900/H1640 mm -Weight: 83 kg

Automat. Bindemaschine / Automatic Binding Bindomatic 9000 Serial-No. 15270002 Dokumentformat DIN A4 Rückenstärke 1,5 bis 15mm Kapazität Bis zu 30 Dokumente innerhalb von 1 Minute Stromversorgung 230 V, 50/60 Hz, 140 W (maximal) Abmessungen 746 x 645 x 43 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker -Steel locker: three-winged, compartment width 30 cm -Width: 900mm -Depth: 500 mm -Height: 1840mm -Doors: lockable, without lock -Number: 1x locker available -Weight: 56 kg

Tool case, tool box, plastic tool box, tool trolley -Manufacturer: Stanley, plastic tool box tool trolley type 1-93-968 -3 compartments: see photos -lockable: without lock -Dimensions: 470/310/H620 mm -Weight: 4.5 kg

USB charging socket, USB charging socket -Manufacturer: Berker, USB charging socket 230 V, 2-way, 3A Ovp -Type: 926102505 ZR3722 -Number: 25 x socket available -Price per piece -Packaging dimensions: 80/80/H60 mm -Weight: 0.2 kg/piece

Geared motor Article number: FDU1703 2359264 008 2KJ3101-1CE11-9FR1-Z ZF19-LA71MH4-L4N IP55 50HZ 1.73\1.0A 0.37KW S1 1370r\min n2:72.4r\min 11Kg NEW and fully functional, from stock, see pictures for more details.

Interroll angled-belt conveyor 30° 1525-950-840 RA2327 new Make: Interroll Year of manufacture: 2022 Inlet angle: 30 Length: 800mm shortest length at angle starting, total length 2250 mm Belt width (RB): 840 mm ( 90 mm each ) Frame height: 160 mm Nominal/external width (NB): 950 mm, 1250 with motor average conveying speed: 0,76 m/s, with frequency converter stepples controllable Motor drive: Sew Movi Mot V 230/400, kW 0,75 Overall height side wall: 150 mm Optionally available: Supports All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter KW: 0,75/S1 condition: new Antrieb: SEW Getriebemotor mit MOVIMOT Electric data: 0,75 kW, 400 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1525 Frame width in mm (NB): 950 ...

Aluminum adhesive tape, aluminum tape, aluminum tape -Manufacturer: kip, ALU-Band 345 DIN-4102-B1 -Type: ALU 901 AC -Length: 50 m -Width: 50 mm -Thickness: 30 mm -Quantity: 5 rolls available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: Ø116 x 50 mm -Weight: 0.5 kg/piece

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 935mm -Cross section: 140 x 50 mm -Recording: see photos -Dimensions each: 1040/140/H660 mm -Total weight: 156 kg

We offer, in the current state, ex site Fruit juice concentrate plant Was used for apple and sour cherry Manufacturer: Unipektin Year of Make: 1990 Type: Case Film Intake: 23,000 kg/h Water evaporation: 10,000 kg/h Only pre-evaporator with aroma column Machines are dismantled Subject to prior sale

curved belt conveyor curved belt 60° right Transnorm TS 1600-140 v2 Technical details: Manufacturer: Transnorm Type: curved belt 60° right Year 2018 Direction: Right Width: 900 mm Nominal radius: 1100 mm Please ask without support, if needed Drive: SEW geared motor location: inside pulling Features: Construction year: 2018 condition: as good as new (used) Nominal / inner radius in mm: 1100 Belt width in mm: 900 angle: 60° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ans ...

Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Eberhard Bauer, geared motor -Type: unfortunately no type designation, approx. 5.5 kW -Speed: 56 rpm -Power: RPM -Shaft: Ø 65 x 120 mm -Design: B3 -Dimensions: 930/410/H375 mm -Weight: 212 kg

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL PAA 9001.25 Year of Make: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with power source Kjellberg HiFocus 280i 2 oxyfuel burners propane Beuting vibrating conveyor table Donaldson DFPRO12 filter system for outdoor installation

Transnorm inclined roller conveyor 2355-980-640 - Showroom machine RA2316 Make: Transnorm Roller width (RB): 640 mm Nominal/outer width (NB): 980 mm Length: 2355 mm Diameter rollers: 50 mm Distance between rollers: 55 mm Roller conveyor motor: SEW drive motor frame height: 210 410 mm side guide with 200mm belt conveyor included Conveyor speed: freely adjustable with frequency converter Incl. supports, curent height 800mm Optionally available: Supports, if deviating from the current ones MFE52 Ethernet frequency inverter control unit Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany Features: Construction year: 2017 condition: Ausstellungsstück nominal voltage: 380-500V angle: 13,4° Conveying length in mm: 2355 Nominal / outside width in mm: 980 Roll width in mm: 640 Roll division in mm: 55 Driven: YES Engine type: 2  ...

Logopak 920 IIP labeller Serial: 2040294 2004, Print and apply labelling system, high speed pallet labelling, with label and ribbon rolls of up to 1200m, up to 240 pallets per hour, touch screen controls, with manual, 3Ph

Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor -Type: ZG2 BMREB 90L4-8 AF -Speed: 100/50 rpm -Power: 1/0.6 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Dimensions: 585/200/H250 mm -Weight: 40 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 14 m/min -Conveyor belt: 2800 x 345 mm -Drive: SEW-Eurodrive 0.37 kW -Total dimensions: 3000/970/H320 mm -Weight: 176 kg

Reference Num.: 4036 Brand: Konica Minolta Type: Bizhub Pro 951 (black / white) Construction year: 2013 Impressions: 6 mio Available: directly Status: In production Location: Deutschland Equipment: - Scanner - Duplexdruck - Locheinheit - Brosch?renfinisher - Falzeinheit

Transnorm conveyor belt GF 29750-900-800 RA2215 Technical data: Conveyor length (NL): 29750 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA47/T DT80 N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 29750 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor sp ...

balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Tecna, spring balancer type 9190 -Load capacity: 0.4 - 1 kg -Rope length: 1600 mm -Number: 1x spring balancer available -Dimensions: 180/110/H55 mm -Own weight: 0.6 kg

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 426.000B 9000 -Art.No.: 295 434 GK -Shaft: Ø 6 x 11 mm -Dimensions: 170/150/H60 mm -Weight: 0.4 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank, Ø 925 x 9 mm -Inside: Ø: 100 mm -Hole circle: Ø 250/200 x 30 mm -Number of teeth: see photo -Weight: 26 kg

test mandrel, tool holder, milling holder, milling tool -Manufacturer: Bahmüller, boring bar -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 -Dimensions: Ø 50 x 183 mm -Weight: 1.6 kg