tba 9 200 used for sale

Punching capacity: 165 kN working area: 2070 x 1280 mm plate thickness: 6,4 mm control: CC 220 workpiece weight: 150 kg punch diameter: 76,2 mm : 80 m/min : 55 m/min weight of the machine ca.: 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

Used stationary dissolver made by Teja, type: DDZ-90-7.5/2000, capacity: 2000 liters. Dissolver equipped with cooling jacket, anchor mixer with scrapers and dispersing mixer. Acid-resistant execution. Motor power 90 kW.

AGFA/ Cawo Cawomat 2000 IR - X-ray processing machine • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Quantity: 2 pieces Manufacturer: Knoll Type: 200 S-1 Year of Make: 2013 Total length: 4 m Conveyor belt: 2 m

2 trolleys (1x1x1,9m) Electric heating Air conditioning (cold) Technical data: Jumbo 1 smoke generator 56kW heating power 8kW cooling power

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 800 mm   Y-axis travel: 600 mm   Z-axis travel: 800 mm   W-axis travel: 1250 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° WORKING RANGE -BORING-   drilling depth (max): 800 mm   drilling capacity full bore (steel): 25 mm SPINDLE / HEAD   tool fixture: HSK A50   drive power: 15 kW AXIS DRIVES   feed velocity (max): 15000 mm/min TOOL MAGAZINE   number of positions: 20 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5600 mm   space requirements -front/back-: 4910 mm   total height: 2700 mm   total weight approx.: 10800 kg 20 toolstationswith rotating table 800x600approx 46300hIncluding chip conveyor and variou ...

Drautz lye machine with 2 pullers. and some spare parts Plant technically checked and cleaned. Total length: 3.60m. Hinge folded up 2.50m Width 1.00m Weight 200 kg

Technical data of the shelf connector: Shelving system: Polypal The scope of delivery includes: 01x Shelf connectors, used for shelf spacing: 200 mm Total length: approx. 260 mm U-profile dimensions: approx. 50 x 15 mm Material colour: sendzimir galvanised Drill hole Ø: 11 mm Weight: 0.250 kg | Pcs. Incl.: 02x Screws M10 x 35 mm 02x Nuts M10 02x Washers M20 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

LVD PPBL 200 ton x 4100 mm Capacity: 200 ton x 4100 mm Backgauge: manual Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 11 kW Weight: 13,4 ton

Circumferential diameter over bed ... 500mm Turning length ... 2000mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3640x1100x1580mm Machine weight ... 1940kg The machine is in good condition, possible to test under power.

DAEWOO LYNX 200B LATHE with FANUC control system

Walter Helitronic RtWN 200 NEGI-U

Cast iron bed 2600 x 2000 x 350 mm - No 1 Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

High-performance Dry Mix Concrete Plant SUMAB S-2000 S – fully automatic. Features include 4 x 25 m³ aggregate hoppers, 2 m³ aggregate weighing system, 1,000 kg cement weighing system, 52 T cement silo, screw conveyors, water dosing unit, additive dosing, K2 Lite computer automation system. Compact design for container transport. Includes control cabin, air compressor, and basic spare parts set. Built with durable materials and designed for efficient, continuous operation. Ideal for high-volume production. Ready for immediate installation.

2 lactose decanter systems, One is from Sharpes, Alfa Laval Group, Machine built in 1990, overhauled Order No. ZM 6063/90, Masch, No. 2312 Speed max. 3250 rpm, drum diam. 355.6 mm The 2nd machine is from Geißel Maschinenbau GmbH 97246 Eibelstadt Masch. No. 2367 from 1992 Drum diameter 355 mm, speed max. 3,150 per min.

Key data: 4000 mm, 2000 mm, 575 mm

Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Control: OSP-P 300S X-axis: 690 mm Y-axis with stroke: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80-fold Equipment: - Collision avoidance system - Tool monitoring system - Tool measuring device - Tool calibration - Sub-spindle with tailstock function - Renishaw touch probe - Door automation - NC bezel support with bezel SMW SLU-Z 3.2 - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

Offer 25176 Specifications: - max. working width 2040 mm - max. cutting capacity St 40 5 mm - Cutting gap adjustment - Number of hydraulic hold-downs 11 pcs - Engine backgauge 10 - 700 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 840 mm - Space required including back gauge, without front support arms -ca. W 2500 x H 1450 x D 1650 mm - Weight approx. 3500 kg - with: - E-foot switch - Cut line illumination

weight: 25 kg taper MK: 0 Consisting fo following modules: 4 pcs Multi Quick MQ200 complete 200-160-2428 4 pcs structural element B50 053-200-2428 4 pcs. structural elementB50 053-110-2428 4 pcs. tension shoe 100-2-205-25 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 850 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01

Step conveyors, step lift conveyors KÖBERLEIN & SEIGERT Type A 400 / 2000Feeding technology, feeding system, incline conveyors, inclined conveyors, steep conveyorsFabr. No.03-3964 Year of construction 2003Slide width 400 mmSlide thickness 40 mmConveyor stages 10 piecesTransfer height on the incline conveyor 2200 mmTransfer height on the side of the feeder 1800 mmFilling height 750 mmConveying slope 75Motor power 1.5 kWMotor speed 1450 rpm. Mains connection 400 volts, 50 Hz- Low-wear sliders- Electromechanical drive-

Roller conveyor with drive SFB conveyor technology type ITF / R-KT 50Roller conveyor with driven carrier rollers, roller conveyorMachine- No: 201800954/2 Year of construction 2019Roller conveyor length: 2000 mmUsable roller width: 500 mmRoller diameter: 50 mmNumber of rollers: 21 piecesRoller spacing: 100 mmConveyor speed: approx. 8 meters/minMotor power: 0.12 kWNet connection: 400 volts, 50 Hz- chain drive via SEW gear motor- all rollers driven with freewheel in both directions- ball-bearing steel rollers- Frame profile made of 3 mm U-steel with

Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -

An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.

Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: +/-0.008mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible.

Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible.

Year: 2001 serial number: 0940/01 operating pressure: 8 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

sheet width: 2000 mm sheet thickness - max.: 6 mm connected load: 7,5 kW : . with crowbar: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

max. wheel diameter: 0 mm max. number of teeth: 0 max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC controlled milling machine for synchronous rings The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg

table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm weight of the machine ca.: 0,45 t Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Height adjustable from approx. 920 - 1000mm Ribbed bottom for reinforcement. including floor storage Accessories optional Accessories shown are optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity:110 kW feed pressure:10 bar Number of working hours:11 372 / Lastst. 7436 h volume capacity:16,75 m³/min total power requirement:110 kW weight of the machine ca.:2,3 t dimensions of the machine ca.:2400 x 1630 x1820 mm

max. wheel diameter: 0 mm gear width: 120 mm max. module: 3 min. module: 1 total power requirement: 20 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m : : : : : : 5 machines in stock, YOM: between 1986 and 1990 Gear Æ, min./max. 55 / 120 mm Gear Æ for shaft-formed parts 80 mm Module (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 ° Helix angle, max. 40 ° Workpiece clamping length 145 - 420 mm Grinding worm Æ 300 - 400 mm Grinding worm width 25 - 40 mm Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm Feed range 0.4 - 4 mm/rev Total electrical load 20 kW - 380 V - 50 Hz Weight 7,500 kg Accessories / Special Features REISHAUE ...

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length:600 mm grinding width:200 mm total power requirement:5 kW weight of the machine ca.:1,4 t dimensions of the machine ca.:3 x 3 m