tba 9 200 used for sale

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg

Hubkneter, Fabr. Diosna Type D200 A

Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 200 mm -Recess: Ø 162 mm -Bolt circle: 3 x 180 mm -Passage: Ø 52 mm -Weight: 13 kg

Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg

Stock# UG6367 Used stainless steel contact parts planetary mixer by Tonelli, Universal Model P300 (IT). Machine has two agitators and is equipped with three mobile stainless steel mixing pans, each with volume 300 l. Last time used in food industry.

Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg

Function generator, oscilloscope -Frequency range: 0.2 Hz to 240 kHz -Dimensions: 225/225/H85 mm -Weight: 1.2 kg

turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used RO station by EPURO type RO 2000 PL. New 2017. Technical data: Medium - water, Nominal capacity Q [m3/h] - 2.0, SDI -

Clip guide plate 36br and deflector for clipping machine FCA 160 Poly Clip Item Number : Clip guide plate - 200623 Deflector - 162262 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

Repair service Reparatur Service Part: Axle amplifier type MR-S1-200-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 04x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 04x Compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 04x Rack trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm N ...

Repair service Reparatur Service Part: Axle amplifier type MR-S11-200-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 2,630 mm Number of fields / row of shelves: 02 pcs á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 03x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 08x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 06x Compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 08x Rack trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm Nu ...

Repair service Reparatur Service Part: Axle amplifier type MR-S12-200-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 6,500 mm Number of fields / row of shelves: 05 pcs á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 06x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 20x shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 12x compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 20x shelving trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm ...

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston: Ø 50 mm stroke: 200 mm -Piston rod: Ø 20 mm -Quantity: 1x available --Dimensions: 65/65/H580 mm -Weight: 4.2 kg

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1200 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1060 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 445 mm -Total length extended: 645 mm -Price: per piece -Number: 2x available -Dimensions: 96/96/H445 mm -Weight: 6.6 kg

2000 Ton Sumitomo Hot Forging Press line Year 2006 Stroke 350 mm (13.78") Strokes per min 75 Shut height 850 mm (33.47") SlideAdj. 7 mm (.27") Ram size 1200 mm LR X 1300 mm FB Bed size 1320 mm LR X 1300 mm FB 4 stage transfer system Slide knockout Bottom knockout Scrap System Dual Die Changer Extra Die Shoes Billet Heater and Billet Saw Also Available This line was used by HONDA to make transmission gears, It takes a billet, cuts it to size, heats it to 1300 C then the press hits it 4 times. It can determine good from bad parts, the bad parts get sent to a quench tank, the good parts get sent into a cool down conveyor that you can pick the parts up by hand at the end. The entire system was ran by one operator.

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -End position damping: adjustable on both sides -Dimensions: 54/54/H400 mm -Weight: 2.2 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 200 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 65/65/H450 mm -Weight: 3 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 50 mm -piston rod: 16 mm (connection M16 x 1.5 thread) -Total length: 383 mm -Total length extended: 583 mm -Price: per piece -Number: 1x available -Weight: 1.35 kg

Dematic conveyor system Roller conveyors 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Roller width (RB): 540 mm Roller pitch: 62,5-125 mm variable Drive types: none or head and center drive Weight of conveyed goods: up to 30 kg Optionally available e.g: Motors with and without frequency inverter from SEW Eurodrive / Movimot Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: new Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5, 130 Driven: möglich scope o ...

Data sheet of retrofit POS. GE 20.25 Gebhardt roller conveyor (without drive), FB = 1,260 mm, 2000 mm = FL Type. Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Net weight: 25 kg/m = G Length: FL = 2.000 mm Conveyor width: FB = 1.260 mm Overall width B = FB + 60: B = 1,320 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 1320 Roll width in mm: 1260 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfa ...

Data sheet of retrofit POS. GE 13.25 Roller conveyors, FB = 550 mm Gebhardt, FL = 2.000 mm Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 2.000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 2000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Amper ...

Budde roller conveyors, FB = 540 mm, 2000 mm = FL Type: roller conveyors with vertical shaft Weight: 135 kg Length: FL = 2.000 mm Conveyor width: FB = 540 mm Total width: 560 mm Conveyor speed: v = 0.5 m/s Support roller pitch: 75 mm Drive: SEW Power: 0.37 kW Voltage: 230/400 V Support: Including restraints swivel castors with Stoppers Features: condition: very good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 560 Roll width in mm: 540 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: including supports with castors and brakes Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit ...

Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

geared motor, electric motor -Speed: 40.5 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Dimensions: 445/230/H210 mm -Weight: 26 kg

Gear motor, electric motor, three-phase motor -Speed: 19.5/78 rpm -Power: 0.1/0.4 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 410/220/H210 mm -Weight: 21.9 kg

Gear motor, electric motor -Speed: 20.5 rpm -Power: 0.37kw -Type: B5 -Diameter shaft: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price per piece -Dimensions: 500/230/H220 mm -Weight: 31kg

Gear motor, electric motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 1x geared motors available -Price: per piece -Weight: 31 kg

8 Sulzer TPS Terry Looms 360cm Year 2000 8 Colours 16 Frames 20 Levers 1.25 Beams 1 Cloth roll 2 Weft feeders on the loom (total 29 pcs for 8 looms) Staubli dobby 2668 Heald wires and droppers 5000 Total number of beams are 20 for 8 machines

T9STELA AIR HEATER indirect 2000 KW, SLI 2000; Weishauptbrenner L9T OIL Tel. 01715213204

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Hand lever shears -Material thickness: max. 2 mm -Blade length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing with the pictures -Total length: 200 mm -Total height: 188 mm -Weight: 6 kg

Offer 22569 Specifications: - Max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Motorized stroke upper beam - Max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Manual bending process is supported by eccentric weight - Connection 400 V - Space requirement approx. W 3700 x H 1250 x D 450 mm - Weight approx. 1700 kg

Gear motor, electric motor -Speed: 30.5 rpm -Power: 0.55 kW -Brake: 440 V -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 605/250/H215 mm -Weight: 36 kg

Gear motor, electric motor -Speed: 68 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 400/180/H200 mm -Weight: 21 kg

Offer up to 2 UTX Techlon 200 round slings (polyester) here. WLL: 20000kg EWL: 5m Unfortunately, they have been dragged over the hall floor a few times and are now quite dark, but they are technically very well preserved, have no cracks or cuts and the blue shield is completely present. Last test 01/2021, no more use after 07/2021

• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz