126,696 used machines on RESALE, but how to find them? Machine Search
Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...
6-wheel mower with four-wheel drive, Farymann 2 cylinder diesel engine, hydrostatic drive, power steering. Hydraulic inclination adjustment, track width adjustment, spread arm with 180 cm double knife mower beam. Tyres 6x 4.50-14 AS.
; Gross weight [kg]: 5847; Engine: Perkins 4016TAG1A; Accessories: Control Panel, Including: Coolant heater and battery charger
5 Axis Lid Maho DMU 200 P Built in 2000 The machine is in very good condition. Videos under power available ! Technical data: Travel: X 1800 mm Y 2000 mm Z 1100 mm NC Round Table: Table area: 1700 x 1400mm Permissible load: 5000 kg Number of grooves: 11 Axis (swivel range) : 360 x 0.001 degrees Motor spindle: 8,000 rpm (SK50) Tool holder: SK 50 Tool changer: 60 seats Max tool weight: 20 Kg Max tool length: 450mm Max tool diameter: 110mm
; Gross weight [kg]: 2058; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 394
Key data: 160 KW, 200 kVA, 400 V
MODEL: EQ-VP200160 GENERATOR ENGINE: Volvo Penta TAD732GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 200(kVA) / 160(kW) CYLINDERS: 6 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1700kg DIMENSIONS L/W/HEIGHT (MM): 252010601530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight pr ...
Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg
Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.
The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg
:::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol Spindle nose: ASA 6 Spindle power: 22Kw Number of main spindle speeds: 5000 Turning Diameter: 540mm Self-centering diameter: 210mm Bar Passage: 51mm Turning length: 1018mm Number of tools: 40 Spindle power: 7.5Kw Number of spindle speeds: 6000 X-axis travel: 530mm Y-axis travel: +- 70mm Z-axis travel: 1065mm Adjustable B-axis travel: 1065° Fast feeds for linear axes X Y Z: 30m/min Tailstock: yes Steerer stroke: 140mm Chip conveyor: belt Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3500mm Width: 2100mm Height: 2500mm Weight: 5700Kg
- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°
: 15000 kg height: 790 - 1350 mm width: 2000 mm : ja : 120 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale is a top-equipped system for briquetting including silos, conveyor technology and packaging unit, consisting of the following components: For sale is a comprehensive briquetting plant including silos, conveyor technology and packaging unit, consisting of the following components: Silo and discharge technology 2x steel silos, each approx. 20 m³ usable capacity Including silo discharge systems Briquetting presses 1x Briquetting press SPM PAWERT AG, Type 84/1 - I 90/200, Masch.-Nr. 1060, Power: 55 kW 1x Briquetting press SPM PAWERT AG, Type 96/1 - I 90/200 SBP, Masch.-Nr. 1140Bj.2021 Conveyor and transport system Complete transport route including: • - 2 cooling lines • - All conveyor belts, roller conveyors and accessories Cutting & packaging technology 2 cross-cut stations with noise protection cabin 1 Feeder KÖRA Packmat, type presumably EF-235 1 shrink pack ...
Key data: 200 KW, 250 kVA, 400 V
Generator Set Specifications: Model: EQ-I250200 Primary power: 250 kVA / 200 kW Standby power: 275 kVA / 220 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TE8P Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3770 mm Width: 1350 mm Height: 2370 mm Weight Open: 2790 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil l ...
Key data: 160 KW, 200 kVA, 400 V
Generator Set Specifications: Model: EQ-I200160 Primary power: 200 kVA / 160 kW Standby power: 220 kVA / 176 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TM7 Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3150 mm Width: 1056 mm Height: 1900 mm Weight Open: 2000 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil ...
Key data: 1140 °C
Continious Brazing/Sintering furnace manufactured by Mahler. Type: Humpback (lower H2 consumption). Belt width: 450mm Clearance above belt: 200 mm Heating length: 5000mm Gross throughput: 600 kg/h Electric heating power: 198 kW Service temperature: 1140 Adjustable range of belt speed: 100-1000 mm/min Temperature cotroul groups: 5x Total length: 30m width: 1,8m height: 2,8m Hydrogen connection: 0,1bar 30Nm3/h (type 3.0) Nitrogen connection: 0,1 bar 60 Nm3/h (type 5.0) Exhaust gas : 300 m3/h Furnace is in use, and was regularly serviced. In 12. 2024 brick lining, heating elements, thermocouples, mesh belt and muffle was replaced . Spare parts are available, in case of interest, can be subject of seperate agreement. Offer includes: - Water cooling system with glicol base heat exchanger - Exhaust tubes (2x around 5m Stainless steel) - 5x sensor system to detect ex ...
Description Volume flow 480 litres/min. 16.9 m3/h Pressure max. 10 bar Nominal power 4 kW Noise level 76 dB Voltage: 400 V Tank: 200 litres Weight: 140 kg Dimensions: 1460 x 640 x 1140 mm
Description for use in the laboratory and for production Round drying chamber Two-chamber systems with separation valve Folding door Materiali Stainless steel 316TI, 316L Solvent capacitors Automatic cleaning CIP Process visualization Product shells Explosion protection Version GMP compliant version Documentation / qualification from year 2015 Purchase price per piece was 40,000 euros plus VAT purchased for dehumidification of paper i.e. the inserts with the roll transport can be removed
Swash-up machine Material : Stainless steel --> 3-deck machine, screening in 4 fractions.
Processing plant Manufacturer: Koruma Type: Disho A140/200 No.: 4,209 Built: 1988 with user manual no vacuum, no double jacket with control cabinet LWH: 1400 x 850 x 1450 mm
Bin lifter Type Lifting equipment Height 1900 Width 1500 mm Length 1800 mm Main material Stainlees Steel Time of realisation 2-3 weeks
Part Number: 7687 SPECIFICATIONS - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2pcs - sieve dimensions 40x40mm - toothed pulling shaft at the bottom - lower shaft motor 4kW - toothed pulling shaft from above - upper shaft motor 4kW - belt feeder - length of the feeding belt 4720mm - width of the feeding belt 500mm - main motor 75kW - Autoewers (adjustable) - total dimensions of the machine length/width/height 3100x2000x1830mm - total dimensions of the feeder length/width/height 4800x780x980mm - weight about 5000kg ADVANTAGES – made in Germany – autorewers – used chipper, very good condition Net price: 120900 PLN Net price: 28447 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)
Mechanic plate bending machine Goyar 3C-25/20. Bending lenght: 2000mm. Bending capacity: 25mm. Diameter of upper cylinder: 285mm. Diameter of lower cylinders: 235mm. Main motor power: 20cv. Bending speed: 5 mpm. Weight: 5500Kgs.
Hobart A 200 Planetary Stirrer 3 speed full gearbox 1st gear 107 rpm 2nd gear 198 rpm 3rd gear 361 rpm Boiler capacity 20 l Very good operational condition, directly from production!
Wintersteiger DSG 150/200 Thin-cutting creel with center cut device and planing device Cutting width: 150 mm | Cutting height: 200 mm For sale is a professional thin-cutting creel of the type Wintersteiger DSG 150/200, equipped with a center cutting device and integrated planing unit. The machine is ideal for precise slat production with minimal material loss – especially in the parquet, furniture and solid wood processing sectors. Specifications: • Cutting width: up to 150 mm • Cutting height: up to 200 mm • Minimum fin thickness: approx. 1.5 mm • Kerf: from approx. 0.9–1.2 mm (depending on the tool) • Stroke rate: up to 450 strokes/min • Feed speed: approx. 0.3 – 1.8 m/min • Main motor power: 11 kW • Cutting accuracy: ± 0.1 mm Equipment: • Center incision device for centric incisions • Integrated planing device (double planer) ...
Fixed bed milling machine Zayer 2000BF. Table: 2500x700mm. Longitudinal travel: 2000mm. Cross travel: 1000mm. Vertical travel: 1000mm. ISO50. Speeds: 18. (28-1800rpm). Power: 15cv. Weight: 13000Kgs. Equipped with DRO Fagor.
Artech HD granulator SG 80 120 with 200 kW. Well suited for EBS, cables, used tires, plastics, AzV. Well maintained machine. Recently overhauled.
CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800
TETRA PAK A3 COMPACT FLEX 250ML AND 200ML PRISMA FILLING LINE Item #: Usm-131 Category Tetra Pak A3 CF/Flex A3 Compact Flex 200ml and 250ml Prisma Filling Line with quick Change kit. Year of manufacturing for the full line is 2016 and few working hours, just like new 1-A3 Compact Flex 200ml and 250ml Prisma Filling machine, Speed 9000 Packs per hour 2-Date Printer 3-Helix Accumulator 30 meter 4-Straw applicator TSA 30 5-Shrink 30 6-Conveyors and Paper Trolly
0: , St. Width: 1080 mm Length: 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Introducing the Danstoker A-S Boiler – Reliable, Efficient, and Built to Last! Specifications: Model: EEB-W HT Serial Number: 78-6155 Year of Manufacture: 2009 Max. Heat Output: 1005 kW Max. Steam Rating: 6.0 Bar (Design Pressure) Design Temperature: 110°C Test Pressure: 9.0 Bar Water Volume Capacity: 3143 Liters This high-performance boiler is engineered for durability and efficiency, making it ideal for industrial applications. With its robust construction and certified design, the Danstoker A-S ensures reliable operation under demanding conditions. Perfect for businesses seeking a trusted heating solution! for more Details: 07379844145 financeukpowergeneratorsltd.com hashtag#Danstoker hashtag#IndustrialBoiler hashtag#Efficiency hashtag#Reliability hashtag#HeatingSolutions hashtag#EngineeringExcellence Private Notes
Optical sorting machine with material feed (via 2 stainless steel infeed hoppers and 2 electronically controlled vibratory chutes), material chute (made of specially coated aluminium), optical unit (4 high-resolution monochrome cameras with 2,048 pixels each; integrated image processing with a resolution of 0.09 mm) and blow-out system (144 high-speed blow-out nozzles with 1,400 cycles per second). The machine can be used, for example, to remove particles of different colours or foreign bodies from a material stream. Throughput: 500 to 800 kg/h (for quartz sand 0.1 - 6.0 mm). IP6X protection class for dustproof operation; incl. connection for external dust removal. Dimensions: 1.4 m wide x 1.8 m deep x 1.90 m high.
Inv. Num. : 5457 Type: UB 63/2000 Producer: HOL-MONTA Created: 2001 Parameters: Control system: Kavalír Maximum grinding length: 2000 mm Grinding diameter: 630 mm Tip stroke: 375 mm Total power requirement: 41 kW
Code 61063 Description Surface grinding machine Make ABA Model FFU 2000/60 Serial No. 208 125 Control Abamatic 3 Year 1986 Tablesize 2510 x 500 mm Grinding surface L x B x H 2000 x 600 x 700 mm Magnetical plate size L x B 2000 x 500 mm Speed table movement 3 – 30 m/min. Max. distance table – centre grinding wheel 900 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 50 x Ø 127 mm Spindel power 26 kW Spindel speed 1600 - 3000 rpm Motor power 26 kW – 380 Volt Total electr.com. 34 kW Total space L x W x H 7000 x 3500 x 2650 mm Weight 10500 kgs Accessoiries Elec. Magneticplate 2000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in good condition
Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.
specifications: - Clamping area approx. 400 x 300 mm - Travel across x approx. 500mm - Travel along Y approx. 300mm - 2 Handwheels - Height 220 mm - 4 T - grooves 14 mm - Distance of the T - grooves approx. 72mm - Space required approx. W 1100 x D 900 x H 220 mm - Weight approx. 190 kg
Spindle diameter 2,000 mm Turnerable diameter 2,000 mm MACHINE IN MECHANICAL/ELECTRIC RETROFIT PHASE
Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive ...
Frequency Brand: Heinrich Baumüller Type: BKF/12/100/400-2002 Power Converter Not checked for functionality. Sold only to traders!
We sell a pietroberto fork kneader. The machine is ideal for flatbread doughs. Used and overhauled / Warranty
max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...
turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...
Tensile testing strength: 420 kg pulling force - max.: 2360 Kg weight: 380 kg battery: 24 V / 240 Ah battery: Gewicht: 320 Kg weight of the machine ca.: 700 Kg Dimensions (HxWxD): 1,2 x 1,2 x 1,4 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 200 mm min. bending diameter: Ø 300 mm bending speed: 5 m/min total power requirement: 5,5 kW weight of the machine ca.: 4.000 kg dimensions of the machine ca.: 4800x1300x1270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Environmental technology Kreisel Krauschwitz - Rotary valve Product name: Rotary valve Manufacturer: Umwelttechnik Kreisel Krauschwitz Type: ANG 200-11-12 Z (RF47) Year of construction: 2006 Machine number: 61614 Condition: used Inlet opening: 200 x 200 mm Outlet opening: 200 x 200 mm Cell depth: 60 mm Cell width: 200 mm Cell wall: 8 mm Number of cells: 8 Engine: SEW-EURODRIVE Type: RF47 DT71D4/TF RPM: 1380/12 Power: 0.37 kW Voltage: 230/400 V Protection class: IP55 Machine size: 850mm x 300mm x 300mm (L x W x H) Transport dimensions: 1,200mm x 800mm x 450mm (L x W x H) on pallet Number of packaging units: 1 Weight: approx. 100 kg on disposable pallet The rotary valve was completely refurbished, checked and tested for function in our company. Price: 1.390,00 € (VB) plus VAT from location Grunow (Brandenburg) (Subject to changes and errors regar ...
pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 290 mm turning length: 850 mm swing diameter: 600 mm control: Siemens type: 840 D mm spindle passage: 103 mm turning speeds: 3000 U/min live tooling: 3000 U/min rapid travel - grinding spindle: 25 m/min total power requirement: 65 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Offer price without tools Optionally, the accessories can also be purchased: 106 steel holders for indoor and outdoor use. External machining, 20 driven tools (including 10 x angle tools) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 200 mm clamping range: 210 mm clamping height: 55 mm weight: 34,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
