tba 9 200 used for sale

Gun Cleaning Device MARX PWA 900 - Used-Stainless Steel Housing Parts, Timer, Rinse Nozzle ---------- Technical Data ---------- Dimension (LxWxH): 670 x 510 x 370 mm, Compressed Air: 6 bar

Stock# U2452 Used stainless steel two decks tumbling screen by Allgeier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen.

Stock# U2458-1 Used vertical stainless steel 1.4571 (AISI 316Ti) mixing tank by Heidelmeier (DE) with total volume 9000 l. Working volume up to 6000 l. Tank has internal diameter 2470 mm x length of the straight wall 1700 mm. Top flat, with bolted cover. There is an inspection manway with manually rised cover. Bottom welded, conical with central discharge. Tank is equipped with side wall agitator, type "jet stream" by Ystral type TFW-4. Driven directly by el motor 11 kW, 1475 rpm, 400/690 V, 50 Hz. Tank is mounted on 4 stainless steel legs. Last time used in chemical production.

The scope of delivery includes: 01x Steel panel, used Material colour: sendzimir galvanised Total width: approx. 750 mm Total depth: approx. 1,150 mm Clear width: approx. 920 mm Truss support: approx. 58 mm Material thickness: approx. 2.00 mm Weight / piece: approx. 15,00 Kg Note: - The steel panels have a border for the trusses on one side. (Height: approx. 25 mm) - The other side is continuous and serves as a 22 mm high upstand Push-through protection! The following quantities are required for the following truss lengths: 2,250 mm – 03 pieces 3,000 mm – 04 pieces 3,750 mm - 05 pieces Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged sepa ...

The scope of delivery includes: 06x Steel panel, used Manufacturer: SSI Schaefer Total depth: approx. 960 mm Inner depth: approx. 955 mm f. Stand depth: 950 mm Total width: approx. 300 mm Material thickness: approx. 2.50 mm Material colour: sendzimir galvanised Frame profile: approx. 300 x 40 x 20 mm Weight|pcs.: approx. 7,940 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Manufacturer: Wandress, Type: CH 29M/1650<CRLF>BI 99DS/3/1650, Year: 2002, Control: yes, Dust removal brush: yes, Brush type: Riemen, Number of units: 2, kW Leistung Motoren: 0,5, Number of rotations controlled: yes, Units mounted upright: yes, Working width mm: 1700, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, kW-Vorschub: 0,75, Electrical hight adjustment: yes, rotor jets: no, FREE TEXT: Vorgeschaltete Entstaubung im High Speed channel HSC 50/2/1650/ Arbeitshöhe 1100 mm, Year :2002

Manufacturer: Wandress Bürstenmaschine Unten 1 Bürste, Type: CM29/950/1500, Year: 2006, Control: Siemens, Dust removal brush: yes, Brush type: Fibre, Number of units: 1, kW Leistung Motoren: 1 x 0,9, Working width mm: 1500, Through running hight mm: 95, Roll transport: yes, Feeding speed continous adjustable: 3 - 120, Feeding speed min-max m/min: links, kW-Vorschub: links, Fixed edge on left: yes, Fixed edge on right: yes, Ionising: 2 x 150, rotor jets: 800, Year :2006

Hersteller : Lenze, Type: 33.9212, Serial number: 00357356, Card number: 33.9212 E.4H, Screen: 003573560050150000001,

Manufacturer: Marx PWA 900 , Type: Werkzeugrenigungsgerät, FREETEXT1: Gerätetyp A1, FREETEXT2: Druckluft 6 bar, FREETEXT3: Flampunkt 21 Grad, FREETEXT4: Tragkraft 15-20 Kilo, FREETEXT5: Temperatur 0-40, FREETEXT6: 60 Liter Gebinde, FREETEXT7: EX Schutz,

Manufacturer: Siemens Getriebemotor, Type: RPL 40-1 H<CRLF>9486 1/5 BK, Volt: 375, n-min: 18, pm: 4800, Weight approx. kg: 50,

Manufacturer: Indramat Umrichter, Type: MOD/1X045-001/934401, FREETEXT1: TDM1050-300W1,

Manufacturer: Sandingmaster, Type: SCSB 2 - 900, Year: 1980, Monting of the machine: Walze / Schuh, Sanding width mm: 900, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 930 x 1920, Band 1 Leistung kW : 11, Band 2 Leistung kW : 11, Year :1980

Reading type: . 0 weight - pallet system: . kg length: . mm Accuracy 0.01 mm The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to purchase, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Reichenbacher, Type: 950 MC, Year: 1996, Steuerung : Siemens TD 390, Working range X: 5200, Working range Y-axis: 1300, Working range Z: 250, C-Achse: yes, Number of milling spindles: 1, Tool adaption system: HSK, Milling engine 1 hours power: ca.10, r.p.m: 2000-24000, r.p.m: 2000-24000, Number of tool magazines: 1, Number of tools per tool-magazine: 12, Traverse table: yes, Vacuum pumps m³/h: 250, Portal machine: yes, Einsatzbereich Arbeitsplattenfertigung, Year :1996

Manufacturer: Boere , Type: BKS 900 / BBBg20/2, Year: 1985 / 1991, Monting of the machine: Walze Schuh + Walze/Schuh/Bürste, Double sided sanding line: yes, Sanding width mm: 900, Sanding hight mm: 150, Number of sanding belts: 4, Continous adjustable feeding speed m/min: 5 - 25, Rubber roller: yes, Shoe unit: yes, Shoe unit: yes, Schleifbänder unten: 2, Brushing unit: yes, Year :1985 / 1991

Manufacturer: Kleistronik, Type: KT 96000 Funiermessanlage, Year: 2005, Programm: Auswertungssoftware für Funierpakete, Funierparketvermessung: yes, Barcodedrucker: yes, Einlaufband: yes, Scanner: yes, Auslaufband : yes, Feeding speed m/min: 60, Software Auswertung: yes, Flächenermittlung: yes, Schnittstelle SAP: yes, Wight approx. kg: 500, Year :2005

Single Needle Double Lockstitch Flat Sewing Machine with Underfeed

Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP Plate Setter - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output speed: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Sturdy construction for prepress environments

Engine Model: Masa 9001Vb Year of manufacture: 1992 Molds: 15 pieces Pallet size: 1400 x 1100 (900 pieces) Packagers -Rekers 1x Machine mixer Skako 0.75 m³ 1x Machine mixer Swissmade 0.5 m³ 2 conveyor belts (11 m)

1-needle double lockstitch quick sewer

CNC controller: HEIDENHAIN TNC 430 Axes X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 500 Distance spindle nose - table surface mm: 573 Rapid traverse m/min: 10 Worktable Number of pallets: 1 Table dimensions mm: 800 x 465 Maximum workpiece size (D x H) mm: 900 x 528 Max. workpiece weight kg: 450 (500 in large workpieces) T-Slot version: 14 H7 Spindle Spindle speed rpm: 6.300 Spindle drive power kW: 8,6 Bearing Inner Diameter mm.: 70 Tool system Tool holder: SK 40 Tool magazine slots: 34 Max. Tool Diameter: 90 With free neighboring places mm: 125 Tool Magazine: UTC 34 Max. Tool Length mm: 250 Max tool weight kg: 8 Equipment Electronic Handwheel Rinsing gun Tool breakage probe Workarea light CE conformity Cooling Tank capacity: 170 L High-pressure bar: 40L / min Machine running times Rated power kVA: 16  ...

Compressed air-cleaned dust filter with stainless steel housing, filter area: 10 m², filter media: 4 filter cartridges, incl. ESM-3 control unit and manifold for flange mounting on the underside. Filter was used for dedusting a horizontal mixer for mineral building materials.

POWER SUPPLY - MOOG

Scheda alimentazioni

SERVO DRIVE BRU-200 - ELECTRO CRAFT

Aluminium profile, 44m, only € 25/m, 90x90 L B Typ Nut 10 leicht, , used Top Special price ! For the purchase of the complete package of 44m we give you here an absolute best price. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition: The profiles were removed from a new machine that has never been in operation. Scope of delivery: 2 pieces 90x90x2900mm 4 pieces 90x90x2300mm 12 pieces 90x90x1160mm 14 pieces 90x90x1000mm

We are selling here a vacuum sealer from the manufacturer Vama, type VP 900 in a very good used and functional condition. The device was built in 2012, runs on 400 volts, 5 kW, 160 pump, with gassing, welding bar right/left, chamber size 53/53/17 cm, rollable, workshop tested, immediately ready for use, dimensions W/D/H 85/75/95 cm, others on request.

- Cambia filtro automatico Nordson EH-35 - Materiale lavorato: PP / PE

Manufacturer: INOTEC - overhauled Type: WT97-SH Power: 2 kW Weight: approx. 480 kg Length x width x height: 998 x 850 x 1740 mm - Calibers from 17 to 46 mm - Infinitely adjustable speed from 0.25 m/s to 0.8 m/s Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Turning diameter 900 mm Turning length 5000 mm

Macchinario disponibile in zona Lazio

SERVO DRIVE - MOOG Tipo: T161-803

Key data: 900 mm, 600 mm, 370 mm

The compact laser gantries with laser scanner NSP-9060-xx stand for NanoSec laser processing systems that are based on high-quality fiber lasers or CO2 laser technologies. The laser wavelengths of 1064nm, or 10600nm, are suitable for marking all metals, plastics, organic materials, as well as glass. Portals and scan fields of different sizes can be configured with each other. The new system concept allows the scanners with their high precision and speed to be combined with the x,y,z axes of a gantry. Multiple feeds or large formats are processed with the highest precision and production speed.

Key data: 3000 mm, 920 mm, 50 mm

CNC Drilling Center C-Express Classic Drilling/sawing/milling from below Easy operation via graphical user interface 1 Machine Software License 19" LCD color display, mouse keyboard Machine weight 850kg Machine dimension: 2,100x1,500x1,950mm Milling spindle 3.3kW (S1), 24,000rpm Collet ER32 manual Drill Head DH 15 6H1S 9 vertical drilling spindles 6 hotizontal drilling spindles 1 grooving saw X direction More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

FAS roller conveyors 9000-410-350 RA2404 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3x3000 mm = 9000 mm Roller width (RB): 350 mm Nominal/outer width (NB): 410 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 9000 Nominal / outside width in mm: 410 Roll width in mm: 350 Roll division in mm: 62,5, 130 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with t ...

Specifications: Processes: washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz+N+PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Payload, max.: 200 kg Washing tub: 900 l Rinsing tray: 900 l Oil separator: 200 l

Used-refurbished 510 mm cutting width 1300-3200 kg/hour capacity external dimensions: 2200x900x1400mm

VALVOLA IDRAULICA - ARBURG Tipo: 163789 WE10DA 91A G2 40-GO

SERVO DRIVE - MOOG Tipo: T161-803

Size: 20.32 x 20.32 cm Equipments: 8 Inch x 8 Inch and 8 Inch x 5 Inch air pillows. 4 machines Available Good condition without any damage

2023 Cimbria Dantoaster DTF 30/9000 with gas burner. The drum is performend in stainless steel Evaporative capacity kg/h 1500 Caloric consumption kW 1500 Drum motor kW 7.5kw Air consumption Notice that this drum never has been in use

Pressure leaf filter for filtration of vegetable oil - 8m² filter area - 720 litres - Pneumatically operated swing flap at the outlet - Including piping with valves - With control cabinet - Optionally with screw compressor

liter capacity: 980 l Pressure of pump: 8 / 80 bar total power requirement: 16,7 kVA weight of the machine ca.: 1,1 t dimensions of the machine ca.: 2,40 x 2,00 x 1,96 m Coolant System BMF - BMF 980 L -4 - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 2 - Pump output: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 2.2 kW, 3,501 rpm, 6.9 m³/h, 115.0 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 l Pressure of pump: 8 / 20 bar total power requirement: - kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System BOSCH REXROTH - BFA 980-50Hz /S/20/8 - very good condition - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 1.7 kW, 2.3 HP, 2,890 rpm, 60 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Valvola idraulica

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 147 x 50 mm Truss type: SLB 147|18 Agraffe: 5 HK Clear width: 3,990 mm Max. load per pair of trusses 3,900 kg, with the same weight. Distributed load 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

spindle diameter: 125 mm x-travel: 1120 mm y-travel: 710 mm z-travel: 315 mm w-axis: 630 mm size of pallet: 1400 x 900 mm table load: 2 t number of T-slots: 9 Stück distance between columns: 1080 mm distance between table/spindle: 900 mm tool taper: SK 45 feed speeds: 16 - 500 mm/min rapid traverse: 10 m/min spindle motor: 5,5 kW spindle turning speed range: 28 - 1400 U/min max. torque on the spindle: 250 Nm total power requirement: 7 kW weight of the machine ca.: 7,5 t space requirements approx. LxWxH: - m DOUBLE COLUMN JIG BORING MACHINE - Hydraulic Unit - Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

scheda Piovan Easy3 CVA30 V03s 963S126 da magazzino ricambi no smontaggio

Tastierino di programmazione Box caricatori Piovan da magazzino ricambi no smontaggio

Key data: 900 °C, 250 mm, 220 mm

Maximum temperature: 900° Celcius Inner dimensions LxWxH: 220 x 250 x 200 mm Country of origin: Germany Weight: 300 kg Oven outer dimensions LxWxH: 1000 x 700 x 1400 mm