tba 9 200 used for sale

Transnorm inclined roller conveyor 2355-980-640 - Showroom machine RA2316 Make: Transnorm Roller width (RB): 640 mm Nominal/outer width (NB): 980 mm Length: 2355 mm Diameter rollers: 50 mm Distance between rollers: 55 mm Roller conveyor motor: SEW drive motor frame height: 210 410 mm side guide with 200mm belt conveyor included Conveyor speed: freely adjustable with frequency converter Incl. supports, curent height 800mm Optionally available: Supports, if deviating from the current ones MFE52 Ethernet frequency inverter control unit Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany Features: Construction year: 2017 condition: Ausstellungsstück nominal voltage: 380-500V angle: 13,4° Conveying length in mm: 2355 Nominal / outside width in mm: 980 Roll width in mm: 640 Roll division in mm: 55 Driven: YES Engine type: 2  ...

Logopak 920 IIP labeller Serial: 2040294 2004, Print and apply labelling system, high speed pallet labelling, with label and ribbon rolls of up to 1200m, up to 240 pallets per hour, touch screen controls, with manual, 3Ph

Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 14 m/min -Conveyor belt: 2800 x 345 mm -Drive: SEW-Eurodrive 0.37 kW -Total dimensions: 3000/970/H320 mm -Weight: 176 kg

Reference Num.: 4036 Brand: Konica Minolta Type: Bizhub Pro 951 (black / white) Construction year: 2013 Impressions: 6 mio Available: directly Status: In production Location: Deutschland Equipment: - Scanner - Duplexdruck - Locheinheit - Brosch?renfinisher - Falzeinheit

balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Tecna, spring balancer type 9190 -Load capacity: 0.4 - 1 kg -Rope length: 1600 mm -Number: 1x spring balancer available -Dimensions: 180/110/H55 mm -Own weight: 0.6 kg

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 426.000B 9000 -Art.No.: 295 434 GK -Shaft: Ø 6 x 11 mm -Dimensions: 170/150/H60 mm -Weight: 0.4 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank, Ø 925 x 9 mm -Inside: Ø: 100 mm -Hole circle: Ø 250/200 x 30 mm -Number of teeth: see photo -Weight: 26 kg

test mandrel, tool holder, milling holder, milling tool -Manufacturer: Bahmüller, boring bar -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 -Dimensions: Ø 50 x 183 mm -Weight: 1.6 kg

Transnorm conveyor belt GF 29750-900-800 RA2215 Technical data: Conveyor length (NL): 29750 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA47/T DT80 N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 29750 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor sp ...

Balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Tecna, spring balancer type 9312 -Load capacity: 1 - 2 kg -Rope length: 1600 mm -Number: 1x spring balancer available -Dimensions: 200/110/H55 mm -Own weight: 0.6 kg

BARCODE PRINTER / LABEL PRINTER WITH COLOR RIBBONS Config. No.: 096-104-00404 // Ser. No.: 9056423 Equipment / Additional information: Maximum Print Area: Width: 3.4”/86mm Length (with standard memory): 39”/991mm Resolution: 300dpi/12dots/mm Maximum Print Speed: 8”/203mm per second Label and liner width: 0.79”/20mm– 3.54”/90mm Ribbon width: 0.79”/20mm– 3.4”/87mm

Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid, support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail -Support rail: length 925 mm -Support width: 130 mm -Dimensions total: 935/265/H80 mm -Weight 17.8 kg

Fully automatic palletizing system NPS900 Fully Automatic Stretch Winding Machine GL 200, Good Condition

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys -Transport trolley: with steel plate -Platform: 900 x 900 mm with hole Ø 50 mm -Design: 2x swivel castors with brake, 2 fixed castors -Load capacity: kg -External dimensions: 900/900/H255 mm -Own weight: 62 kg

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 650 mm -Length: 9.5 m -Transport dimensions: Ø 250 x 650 mm -Weight: 22 kg

turning diameter over bed: 950 mm turning diameter over slide rest: 569 mm turning length: 2200 mm spindle bore: 90 mm faceplate: 800 mm steady: 500 bed width: 580 mm Rapid travel: turning speeds: 800 U/min digital readout: stepless reg. with elect. turning speeds: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3 t clamping width: 3000 mm total power requirement: kW weight of the machine ca.: 0,110 t dimensions of the machine ca.: 3x0,3x0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t stroke: 10-80 mm no. of strokes: 240 Hub/min ram - range of adjustment: 80 mm table surface area: 850x600 mm ram surface: 760x550 mm hole in the table: 850x130 verstellbar mm table height: 1100 mm tool hole in ram: Ø 50 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: BxTxH: 3000x2000x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safety relay, safety control, emergency stop switch, switching device, undervoltage relay, safety switching device -Manufacturer: Dold, safety relay undervoltage relay -Type: AA 9943.12 -Number: 1x relay available -Dimensions: 115/45/H80 mm -Weight: 0.3 kg

Rear weight, forklift weight -Manufacturer: Clark, tail weight -Recording/Dimensions: see photos -Transport dimensions: 1110/1000/H650 mm -Weight: 1900 kg

Electric motor, three-phase motor, pulley motor -Manufacturer: Birkenbeul, electric motor Ty AP 90S4 -Power: 1.1 kW -Speed: 1430 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Protection class: P 33 / IP 44 -Dimensions: 300/265/H180 mm -Weight: 20.7 kg

Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 39.99 mm -Mounting: SK40 -Shaft: R=19.995 / L=219.014 mm -Dimensions total: Ø 65 x 314 mm -Weight: 2.8 kg

Cable bridge, drive-over protection, hose bridge, cable duct -Cable bridge: overrun protection -Channel width: 20 mm -6 mounting recesses -Quantity: 1 piece available -Dimensions: 985/150/H30 mm -Weight: 4.2 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 910 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without key -Weight: 51 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 955 mm -Depth: 440 mm -Height: 1950 mm -Door: lockable, without key -Weight: 66 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 910 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without key -Weight: 52 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 shelves -Width: 935 mm -Depth: 410 mm -Height: 2010 mm -Door: lockable, without key -Weight: 59 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 950 mm -Depth: 500 mm -Height: 1950 mm -Door: lockable, without lock -Weight: 84 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 935 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without a lap -Weight: 78 kg

Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder -Reel: with 3 retaining brackets -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos -Dimensions: Ø 950 x 410 mm -Weight: 35 kg

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters, load break switches, terminal blocks, load disconnectors, fuse load disconnectors -Manufacturer: Rittal, OM adapter -Type: SV 9340.460 -Quantity: 1x adapter available -Dimensions: 70/55/H210 mm -Weight: 0.3 kg

Built-in control unit, control cassette, controller, bus controller, bus module -Manufacturer: B&R, Control unit controller -Type: X20 BC 0043 C01 -Power feed module: X20 PS 9400 -Number: 1 module available -Dimensions: 105/40/80 mm -Weight: 0.1 kg

Geared motor, electric motor, electric geared motor -Speed: 3/25 rpm -Power: 0.07/0.55 kW -Brake -Design: B14 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 38 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 4 kW -Output: 380 V 100 Hz -Power output: 8 kVA -for edgebanders, edgebanding machines -Weight: 120 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 17300 rpm at 300 Hz -Shaft mounting: Collet Ø 12 mm -Dimensions: 340 x 110 x H150 mm -Weight: 10 kg

Reflective light barrier, light barrier -10-40 V DC Price: per piece -Quantity: 5 available -Weight: 0.3 kg

geared motor electric motor -Speed: 30/50 rpm -Power: 0.22/0.9 kW -Design: B3 angle -Shaft diameter: Ø 38 mm -Protection class: IP 65 -Dimensions: 760/250/H400 mm -Weight: 65 kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 7.5mm -Price: complete -Weight: 0.8kg

Wood router bit inserts, knife inserts, form cutter inserts -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 15 mm -Price/Sale: complete -Weight: 0.9 kg

Wood milling inserts, knife inserts, form milling inserts -Blade width: 40 mm -Blade thickness: 2 mm -Price: complete -Weight: 0.3kg

Cutting device, pneumatic press, punch -Type: 290 908 -Max. pressure: 8 bar -Dimensions: 300/340/H270 mm -Weight: 25 kg

Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNG-50 TN 32 970 -Quantity: 12 pieces available Price: per piece -Weight: 0.3 kg/piece

Cable protection ring -Type: KSR-915 Light Grey Price: per package -Number: 7 available -Weight: 1.6 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Power: 720 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 900 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 1299 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/mtu-16v2000-generator-900kva-u sed/415, , = More information =, , Empty weight: 5.680 kg, Type number: 16V2000GENERATOR900KVA

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Rated Power: 835 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 937 , Generator Hz: 60 , Generator Volts: 380/220 , Generator Amps: 1424 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/mtu-12v2000-generator-937kva-u sed/307, , = More information =, , Empty weight: 8.500 kg, Type number: 12V2000 GENERATOR 937KVA

Engine Brand: FORD, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Blue , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 6.3 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 7.9 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 0 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/ford-fdt10200se-generator-7-9k va-new/609, , = More information =, , Empty weight: 170 kg, Type number: FDT10200SE GENERATOR 7.9KVA