tba 9 200 used for sale

Volkswagen Phaeton 3.0 V6 TDI - Registration date: 19.12.2007 - Engine: 3.0 V6 TDI Diesel - Power: 171 kW / 233 hp - Mileage: 272,550 km - Automatic transmission - 5 doors - 5 seats - Color: Black - Air suspension - Leather interior with wood décor - Air conditioning / automatic climate control - Adaptive cruise control (ACC) - Steering wheel heating - Sunroof - 4Motion / all-wheel drive - Euro 4 - 18-inch rims Condition: - Hobbyist vehicle - Severe scratches all around - Repainting and rework available - Sun damage and paint chipping visible - Slight rust spots in several areas - Matt headlights - Driver's seat and passenger seat damaged / torn - Generally clear signs of wear - Vehicle starts and drives - High mileage - Tailgates have limited functionality - No service and no TÜV Important notes: - Sold without warranty or guarantee - Vehicle is s ...

Traffic control trailer / traffic sign trailer - Make: A. Nissen Elektrobau - Type: VMA-01-70 - Year of construction: 2003 - Total weight: 700 kg - Permissible drawbar load: 75 kg -1-axle trailer - Galvanized steel structure - With fold-out traffic sign modules - Integrated battery box with battery -Lighting and reflectors available -Support legs available -Trailer suitable for construction site and traffic safety -Used condition with signs of wear usual for age -Frame in visually good condition -Electrical function untested -Battery condition unknown -Vehicle documents and test documents not checked - Sale is as shown Ideal for road construction, construction site protection or municipal applications Auction-ID: A7-46433-6013

Easy Marker / Richter EM 100 Nailer Auction-ID: A7-47048-76

Very nice Massey Ferguson Centora 7280 AL combine harvester from 2009, in good general condition and ready to work. Machine equipped with a 25 FT cutter bar with transport trolley and a rapeseed side cut. Clean, complete and well maintained set. Auction-ID: A3-43539-38078

Power source: 100-120/200-240 V Auction-ID: A7-47030-44

Lighting does not work Bottom plate in need of replacement Hydraulic piston and mechanical not present 300x185x40 Auction-ID: A3-44486-11123

For sale is an unused VAREM SolarVarem membrane expansion tank with a volume of 80 l from the stock of a dissolved installation company. They are original EU goods made in Italy. Equipment: • Diaphragm Expansion Tank / Pressure Expansion Tank • SolarVarem version • 80 l container volume • Nitrile version • Inlet pressure: 2.5 bar • Max. operating pressure: 6.0 bar • Test pressure: 9.0 bar • Temperature range: -10 °C to +99 °C • CE marking / CE 0036 • Category ≥ II • Counter flange with protective cap • Color: Red • With stand / bracket on the container • Made in Italy Notes: • Unused goods from installation company liquidation • Original packaging / carton available High-quality VAREM SolarVarem expansion tank with 80 l volume made in Italy, suitable for professional applications in the field of solar and building technology. ...

On offer is a used, high-quality and robustly built Lambert market/sales trailer with folding/foldable body. The trailer is suitable for mobile sales, weekly markets, events or comparable purposes. Construction and operation: The trailer has a crankable lifting roof, all-round crankable supports and smooth-running gas-pressure folding elements. According to the seller, the folding elements open very easily and hold well. The sales area is completely covered. Equipment: fold-out sales tables Sturdy real glass display case Side panels and large back panel as rain protection Simple electrical system with battery Shore power connection and light Sink older cash register/scale with cash drawer Weights and other small parts Condition: The trailer is in a used condition appropriate to its age. There are signs of wear and tear due to age and use, soiling on tarpaulins and visible cor ...

Scaffolding material System Plettac SL 70 and compatible, consisting of: 12 pieces Plettac SL70 steel shelves 200 x 32 x 7.5 SLN47002, NEW SO001330 Auction-ID: A1-46973-321

Mori Seiki SL 203 MC, CNC Lathe Year of Make: 2000 Incl. chip conveyor, tailstock Incl. jaw chuck and tool holder in the turret. Auction-ID: A7-47048-9

Double-workstation robotic welding system, built in 2007, consisting of KUKA robot, INE welding machine, KUKA KR C2 controller, steel supporting structure for robot suspension, motorized positioners, control cabinet and service components. The system is CE marked from the factory and is complete with manuals and technical documentation available. The robot is functional, currently turned off for a few months due to lack of use. Verification/overhaul by qualified technical personnel is recommended before recommissioning. Large system, suitable for metal carpentry and automated welding on a double workstation. Auction-ID: A7-47032-1

Toshiba Nemio XG SSA-580A compact ultrasonic system in a mobile version. The device has an integrated control unit with keyboard, trackball control and several connection options for transducers. The system is equipped with a monitor, control panel and integrated printer. Two transducers are installed, additional connection ports are available. Documentation is available. Equipment: · Integrated monitor · Control unit with trackball and keyboard · 2 transducers (transducers) · Multiple transducer connectors · Integrated printer · Mobile system (trolley) · Documentation available Notes: · System currently not booting (boot error) · Hard drives are missing Proven ultrasonic system with extensive equipment and a solid basis for further use, training or spare parts acquisition. Can be used in human and veterinary medicine. Contact: Dennis Blos d.blos@tbauctions.com 0173 6040 381 ...

Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of Make: 2000 Condition: Use, Energized, Control on Windows 7 NEW x-travel 600 mm y-travel 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm Tool changing device 18-fold Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röder's Job Manager (for processing several workpieces one after the other) Probing programs for almost all common geometries Extor Extraction System for Dusty Machining Minimal lubrication Bedtrack blower Blum measuring laser (for tool measurement length + diameter + contour and fracture control) Tool cleaning (air) Cooling unit for spindle and control cabinets Documentation Without accessories such as tools or vises Auction-ID: A7-4 ...

- Mitsubishi P91 Printer Auction-ID: A7-47030-106

approx. 200 pieces of scaffolding normal couplings (fixed couplings) SO000141 Auction-ID: A1-46973-306

Line for painting door glass, consisting of: - automatic loader with flap arm equipped with LOGLAS 16.30 suction cups - automatic loader with bridge structure, programmed picking on LOGLAS/CL 16.30 trolleys - automatic oscillating spraying machine FALLENGLASS 1700 - year 2007, with belt conveyor covered with paper, complete with inlet roller conveyor extension with oscillating and ionizing blower unit - PRE-HEATING OVEN in-line with lower infrared lamps PRE/I-NIR - 180° sideshift with ventilated transversal flash-off oven with CEFLA GT180/3400/5500 air-heating coil - in-line drying oven with hot air and infrared lamps GLASSOVEN EL/7 - year 2007 - cooling tunnel with upper and lower air curtains CEFLA GLASSCOOL SI-3/3 - year 2007 - motorized conveyor VTR 2500 - automatic unloader on trolleys with CEFLA bridge structure UNLOADER -WASHING MACHINE NOT PRESENT- Auction-ID: A7-470 ...

FPA water tanks are equipped as standard with: - Inlet opening with a diameter of 32.5 cm, closed with a steel cover with a rubber gasket - Baffles to prevent water from splashing during transport - Runoff stump - FPA tanks: they are made of steel and galvanized according to EN 1461. Auction-ID: A7-46433-6005

Hydraulic Swivel Bending Machine - Max. dimensions of the sheet metal to be bent: 2000 x 2 [mm] - Electric motor power: 2.2 kW - Bending angle: 0 – 180 degrees Auction-ID: A1-47017-21

start, drive and execute what it needs to do General information Brand: John Deere Type: 6310 SE Vehicle category: Agricultural tractor Fuel: Gasoil (diesel) Identification Chassis number (VIN): L06310V333249(01) License Plate: GLYP494 Document number: 565193467 Data Date of first admission/registration: 10/04/2002 Last registration: 03/03/2014 Weights Permissible max mass: 5320 kg Front axle: 2220 kg Rear axle: 3100 kg Hours Approximately 7419 hours Auction-ID: A3-43539-11888

Kunzmann WF 7 CNC Milling Machine TNC 410 Control Manufacturer: Kunzmann Type: WF 7 Year of Make: 2001 Condition: used, under power Control: Heidenhain TNC 410 X-Weg 610 Y-Path 400 Z-Weg 400 Pick-up SK 40 Speed 1-5000rpm Tilting/swivel table Scope of delivery: – Documents - Approx. 10 tool holders - Without vice Auction-ID: A7-47048-2

Cars can be taken along free of charge if necessary Auction-ID: A1-47041-46

Mazak Super Turbo-X 48 Mk II Laser Cutting Machine, Year 2006, 1.8KW Cutting Capacity, Note: without suction, as it is locked on central suction Auction-ID: A7-47048-77

20 foot shipping container in perfect condition, practically new. Ideal for secure storage of materials, tools, pallets or archives. The walls, roof and floor are in excellent condition, with no perforations or significant corrosion. The doors open and close properly, the seals are in very good condition, guaranteeing a complete seal (no water infiltration, no light passage). Container suitable for use on construction sites, in warehouses, at a private home or a company. Auction-ID: A3-43538-35001

Mikron VCE600 Pro CNC Machining Center Manufacturer: Mikron Type: VCE600 Pro Condition: used, energized and in production Control: Heidenhain iTNC 530 Incl. tools in the turret Auction-ID: A7-47048-27

Mori Seiki CL 153 CNC Lathe Turning diameter over bed: 515 mm Maximum turning diameter: 400 mm Maximum turning length: 303 mm Rapid traverse X-axis: 2010 m/min Rapid traverse Z-axis: 2400 m/min Spindle holder: A2-5 Spindle bore: 67 mm Through-hole spindle: 43 mm Maximum rod diameter: 33 mm Spindle speeds: 60–6000 rpm X-axis travel: 235 mm Travel Z-axis: 310 mm Spindle drive motor: 10 hp 12-speed revolver Electrical connections: 220 V, 60 Hz Auction-ID: A7-47048-23

Toyota Ant 7 SM 10 Year of construction 2008 Auction-ID: A7-47048-53

No hard drive, no battery and no power adapter Auction-ID: A1-47041-49

Trailer is in good condition and can be used immediately Manual winch Galvanized Auction-ID: A1-41957-99

Engel ES 200/50 injection moulding machine – used General data • Manufacturer: Engel • Model: ES 200/50 • Year of construction: 1994 • Condition: functional • Operating hours: approx. 37,757 h • Available: immediately Technical data • Control: EC88 • Injection moulding machine with handling system • Hydraulic design Equipment & Features • Incl. Angus Picker Geiger Handling EA-Mini 2001/500 SLI PMC • Core pull control • Geiger handling X-axis • Protective cladding with safety doors • Integrated control panel Application area • Plastics processing • Injection moulding production • Automated part removal Condition • Used machine • Functional • Signs of wear and tear due to age and use Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction ...

max. turning diameter 356 mm Turning length 510 mm Control M 720 BM MAPPS II Circumferential diameter over bed 923 mm Circumferential diameter over carriage 755 mm Standard turning diameter 275 mm Rod diameter max. 65 mm Main spindle: Spindle nose A2-6 Speed range - spindle max. 5,000 min/-1 Drive power - spindle motor 15 / 11 kW Spindle bearing diameter 120 mm Spindle bore 73 mm max. usable rod diameter 65 mm C-axis 0.001 ° Sub-spindle: Spindle nose A2-5 Speed range - spindle max. 6,000 min/-1 Drive power - spindle motor 11 / 7.5 kW Spindle bearing diameter 85 mm Spindle bore 43 mm max. usable rod diameter ( - ) mm C-axis 0.001 ° Travels: Travel of counter spindle B: 624 mm Travel - x 260 mm Travel - z 590 mm Travel - y 100 (+/-50) mm Tool turret: Turret head (x-fold) 12 powered stations 12 pos Shaft diameter 25 mm Shaft diameter for drill rod max. 50 mm Speed range of the ...

Mitutoyo Crysta-Plus M 544 Coordinate Measuring Machine – used General data • Manufacturer: Mitutoyo • Model: Crysta-Plus M 544 • Condition: used from 2007 • Available: immediately Technical data • Measuring range X/Y/Z: 500 / 400 / 400 mm • Resolution: 0.0005 mm • Probing system: TP20 STD • Stylus ball Ø 4 mm and Ø 8 mm • With measuring PC and MiCAT / MCOSMOS software Equipment & Features • Granite measuring plate • Precision coordinate measuring machine • With accessories and button • Incl. computer, monitor and software • Factory calibration certificate available Calibration • Mitutoyo factory calibration certificate available • Calibration from 19.09.2007 • Machine complies with factory specification Application area • Quality Control • Precision measurements • Manufacturing and measurement tec ...

Battery voltage 24 V, min. battery weight 273 kg, max. battery weight 310 kg, drive power 1.6 kW, without additional batteries Auction-ID: A7-46947-8

Electric Forklift Toyota Triplex Mast 7FBEF20 Overall height 2.1m Hours: 6800h Fork Adjuster Side Stroke Nominal load capacity 2000kg Load capacity: 1670 kg front track width 915mm Auction-ID: A7-47048-75

Herkules 14 PRONAR manure spreader type N262/1, year 2009, in good general condition. Double-axle agricultural machine equipped with a chain belt and a rear spreading system. Alliance 650/50 R22.5 tyres. 23,000 kg MMA, mechanical suspension and hydraulic braking. Homologated speed 40 km/h. Clean machine with normal traces of use. Belgian documents present: certificate of conformity, identification report and technical inspection. Serial number: SZB2621XXH2X00280. Auction-ID: A3-43539-38080

Min. battery weight 15 kg, max. battery weight 20 kg, battery voltage 12 V Auction-ID: A7-46947-15

Mori Seiki DuraVertikal 5080 3Axis Machining Center (11/2006) Manufacturer: Mori Seiki Type: auto_awesome Source language: English 587 Table length 1350 mm Table width 600 mm Number of T-profiles 6 T-profile width 18 mm Max. table load 1000 kg Longitudinal travel (x-axis) 1050 mm Transverse travel (y-axis) 530 mm Travel (z-axis) 510 mm Max. tool diameter 125 mm tool weight 8 kg Spindle nose bt 40 Distance spindle nose table 150 - 660 mm By 0 rpm Until 10,000 rpm Voltage 50 Hz 3x 400 volts Spindle performance 22 kW Total power requirement 58 kVA Machine weight approx. 8,030 kg Length 2,500 mm Width 2,350 mm Height 2,700 mm Give feedback Translation results available Year of manufacture: 11/2006 Condition: used, good, in production I Auction-ID: A7-47048-26

For sale is an unused VAREM SolarVarem membrane expansion tank with a volume of 100 l from the stock of a dissolved installation company. They are original EU goods made in Italy. Equipment: • Diaphragm Expansion Tank / Pressure Expansion Tank • SolarVarem version • 100 l container volume • Nitrile version • Inlet pressure: 2.5 bar • Max. operating pressure: 6.0 bar • Test pressure: 9.0 bar • Temperature range: -10 °C to +99 °C • CE marking / CE 0036 • Category ≥ II • Counter flange with protective cap • Color: Red • With stand / bracket on the container • Dwg. no.: M024A-CE • Made in Italy Notes: • Unused goods from installation company liquidation • Original packaging / carton available High-quality VAREM SolarVarem expansion tank with a volume of 100 l made in Italy, suitable for professional applications in the field o ...

Leadwell LTC-50CL CNC Lathe (10/2006) Manufacturer: Leadwell Type: LTC-50CL CNC Lathe Year of manufacture: 10/2006 Control: Fanuc, Incl. chip conveyor, tailstock, tool turret Auction-ID: A7-47048-5

Massey Ferguson Centora 7282 – 2005 combine harvester equipped with Massey Ferguson 25 FT cutterbar with transport trolley and rapeseed side cut; High-performance and comfortable agricultural machine, ideal for grain farms looking for a reliable machine with a high harvesting capacity. Auction-ID: A3-43539-38077

The cabin is dismantled Auction-ID: A7-47030-137

Mori Seiki NL 2500 Y/700 High Performance Lathe Turning diameter 275 mm Turning length 705 mm Control MAPPS II MSX 850 Circumferential diameter over bed 923.8 mm Circumferential diameter over face slide 755 mm max. turning diameter 356 mm max. rod diameter 80 mm Main spindle Speed range - main spindle 4,000 rpm Drive power - main spindle 26 / 22 kW Spindle nose JIS A2-8 Spindle bore 91 mm Spindle bearing diameter 140 mm C-axis 0.001 ° Travel x-axis 260 mm z-axis 795 mm y-axis 100 (+/- 50) mm Revolver Tool Positions 12 Pos. Shank height for square tool 25 mm Shaft diameter for drill rod max. 50 mm Turret switching time 0.25 sec. Speed range of the indicated Tools 6,000 min -1 Drive power - applied Tools 5.5 / 3.7 kW Feed Rapid traverse X-axis 30 m/min Rapid traverse Z-axis 30 m/min Rapid traverse Y-axis 10 m/min Tailstock Tailstock Shift 564 mm Quill diameter 80 mm Pick-up ...

Control: Heidenhain iTNC 530 Speed: 10,000 rpm Travel in X/Y/Z: 1,050/540/720 mm Spindle: Technology: Belt spindle Speed: 10,000 rpm Power: 12 kW Tool holder: SK40 Work table: Clamping area: 1,120 x 610 mm Table load (max.): 1,000 kg General: Tool magazine: 30 stations Rapid traverse in X/Y/Z: 36/36/30 m/min Equipment/accessories: Chip management: Chip conveyor Coolant management: IKZ pump with filter and high pressure Setup operation: Electronic handwheel Other accessories: Div. gebr. Tool holder and 3 pcs machine vices (1x 125/2x 160), rinsing gun

Mori Seiki DuraVertikal 5080 3Axis Machining Center (11/2006) Manufacturer: Mori Seiki Type: auto_awesome Source language: English 587 Table length 1350 mm Table width 600 mm Number of T-profiles 6 T-profile width 18 mm Max. table load 1000 kg Longitudinal travel (x-axis) 1050 mm Transverse travel (y-axis) 530 mm Travel (z-axis) 510 mm Max. tool diameter 125 mm tool weight 8 kg Spindle nose bt 40 Distance spindle nose table 150 - 660 mm By 0 rpm Until 10,000 rpm Voltage 50 Hz 3x 400 volts Spindle performance 22 kW Total power requirement 58 kVA Machine weight approx. 8,030 kg Length 2,500 mm Width 2,350 mm Height 2,700 mm Give feedback Translation results available Year of manufacture: 11/2006 Condition: used, good, in production I

Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of Make: 2006 Condition: used, very good. regularly serviced by Trumpf. Machine is energized and in use. Operating hours NC hours: 70,305h Beam One Hours: 17,217h Control: Siemens Sinumerik 840 D Punching force: 220KN Laser Power: 2700W Working area laser operation approx.: 2585 x 1280 mm Working area punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support Tables Brush Tables CE marking Standard equipment: Sturdy, easily accessible C-frame Coordinate guide with integrated linear magazine, 21 spaces for tools and clamping claws 1 clamping claws Maintenance-free three-phase servo motors Parts chute 500 x 500 mm (sensor-monitored) HI-LAS High Pressure Cutting TRUMPF Laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting he ...

CNC lathe MAZAK SUPER QUICK TURN 200 Year of Make: 2000 Workspace Max. swing diameter: 525 mm Max. turning diameter: 350 mm Max. turning length: 514 mm Bar work up to diameter: max. 51 mm Main spindle Speed range: 35 – 5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2 – 6 inches Spindle bore: 61 mm Tool turret Standard version: 12-speed Travels X-axis: 190 mm Z-axis: 535 mm

Tool presetting and measuring device from Zoller, smarTcheck series, with PC and monitor unit. Equipment / scope): Tool presetter with measuring optics Machine base / base cabinet Monitor stand with 2 monitors, keyboard and mouse Integrated industrial PC Lighting and camera unit Documentation and documents Condition: Used. Visually well-groomed overall impression with usual signs of wear due to age and use. Machine was last in use. Software starts (see screenshot). Scope of delivery: Zoller smarTcheck complete PC unit in the base cabinet 2 monitors, keyboard, mouse Documents / printouts Manufacturer: E. Zoller GmbH & Co. KG Machine: Zoller smarTcheck Type: V400S-00083 Serial No.: 876-0608/0 Year of manufacture: 2006 Power supply: 230 V / 50–60 Hz Power: < 1 kVA Pneumatics: 4–6 bar Software: Zoller (Version 3.14.013, according to the display) PC: Zoller-IPC (Pentium 4, 2.4 G ...

CNC Control: MAZAK & FANUC L-64 Cutting table: spiked Cutting head: CO₂ laser Suction system: KEMPER with external unit Indicated voltage: 40000 V X-Y-Z axis strokes: 3335 x 1545 x 420 mm A-axis: ±360° B-axis: ±135° Maximum part dimensions: 3050 x 1525 x 22 mm Load capacity: 7.9 kN / 810 kgf Laser power: 4000 W Laser Model: YB-L400A8M Weight: 14600 kg Status: Complete machine with suction unit and accessories Additional information: Sold with an additional laser unit and many spare parts Additional information: Disassembly and loading at the expense of the buyer

• 4-JAW LATHE CHUCK Ø=200 MM Industrial-grade axial spiral lathe chuck made of cast iron with cylindrical holder according to DIN 6350 and one-piece, hard jaws • Speed: max. 2,500 min-1 • Pitch circle fastening thread (F): Ø 176 mm • Mounting thread (G): 6 x 60° | M10 • Centering heel (DxC): Ø 160 x 4 mm • Passage (E): Ø 55 mm • Width (W): 75 mm • Weight (net): approx. 17.5 kg • Including 1 set each of one-piece turning and drilling jaws, tension wrenches and fastening screws • Quality flat spiral lathe chuck made of cast iron for universal applications • Threaded holes (G) on the pitch circle (F) for fastening with screws from the back • Uniform clamping force due to centrally clamping jaws • Cast iron lining body with ground guides • Spiral ring made of high-alloy tool steel, drop-forged and hardened • Gears, pinions and guides hardened and completel ...

CNC lathe GILDEMEISTER CTX 420 Linear Year of Make: 2007 Control: Siemens 840 D Technical data Turning length: 600 mm Turning diameter: 680 mm Spindle passage: 79 mm Speed: 5,000 rpm Variable rotation speed: 5,000 rpm Spindle power: 25 kW Chip conveyor: Yes Main spindle with rod passage: Ø 65 mm Self-centering autoblock: Ø 250 mm

Machine number: A0045A0007 Operating voltage: 400 V Frequency: 50 Hz Connection: 17 kVA Rated current: 35 A Travel X-axis: 2015 mm Travel Y-axis: 1215 mm Max. material thickness: 6.4 mm Max. workpiece weight: 150 kg Max. punching force: 165 kN max. hold-down force: 10 kN Max. stroke sequences punching Hole spacing 1 mm: 600 rpm Signing: 1300 rpm Max. axis speed X-axis: 80 m/min Y-axis: 55 m/min simultaneous: 97 m/min max. acceleration X-axis: 10 m/qs Y-axis: 5 m/qs C-axis punching/thread forming: 175/min Number of positions in the linear magazine: 17 Number of tools/claws: 15/2 Number of tools when using multi-tool/claws: 15-150/2 Number of claws location/2: max. 2/3 Reject parts: max. part size via disc chute: standard 180 x 150 mm max. part size via disc chute with movable support table: 460 x 500 mm Accuracy position deviation: +- 0.1 mm Average position spreading width: +- 0.03 mm in ...