tba 8 tetra used for sale

Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...

Unused Inlet Device, Clamp coupling for Tetra Pak 618 - 718 - 818 Separators., Ref 22 - Part No 548412 01 - Inlet housing, Ref 23 - Part No 538247 04 - Clamp coupling, Ref 24 - Part No 538248 03 - Gasket, Ref 25 - Part No 541709 80 - Elbow pipe, Type of Machine: Inlet device, clamp coupling

Unused Outlet Pipe + Sleeves + Impellors of a Tetra Pak HMRPX 618 Separator., Ref 1 - Part No 540493 02 - Outlet pipe, Ref 3 - Part No 581978 01 - Guide sleeve, Ref 16 - Part No 540527 02 - Impellor bottom part Ø 140 mm, Ref 20 - Part No 540519 02 - Impellor top part Ø 140 mm, Ref 26 - Part No 540551 01 - Spacing sleeve, Ref 38 - Part No 540528 02 - Impellor bottom part Ø 120 mm, Ref 40 - Part No 540520 02 - Impellor top part Ø 120 mm, Type of Machine: Outlet set

Tetra Pak automatic direct standardisation unit which is designed to handle skimming of whole milk and standardisation of cream or standardisation of both cream and milk. Skid mounted unit including PD340 Magnetic flow transmitter for standardised milk, PD340 Magnetic flow transmitter for cream remixing, PD340 Magnetic flow transmitter for standardised cream, density transmitters, valves, some interconnecting piping and a control panel with recorder of fat content, display for flowtransmitter and Alfa Laval Alfast Operator Panel. Previously used in combination with an Alfa Laval HMRPX 714 HGV-74C milk skimmer separator (20.000 liter per hour)., Additional features:, Some clamps for connection / piping are missing., Type of Machine: Standardisation unit for milk, Capacity: 20.000 ltr/h, Weight: ± 500 kg, Dimensions: ± 120 x 120 x 220 cm

Unused Tetra Pak Pressure Gauge, 0 - 10 bar / 0 - 1.0 MPa., Model: 233.50.100 LBM 990.22 1 1/2 Tri-clamp 10bar/MPa., Part No: 90522-0172., Type of Machine: Pressure Gauge

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Used Tetra Pak A3 Compact Flex Filling Line – 200 ml Slim Complete Carton Filling Solution | 9,000 pph | Aseptic Packaging This used Tetra Pak A3 Compact Flex filling line is designed for the efficient filling of 200 ml Slim carton packages. The line offers a compact and reliable solution for producers of liquid food and beverage products, including dairy, juices, and still drinks. The system consists of key Tetra Pak components ensuring smooth operation from filling to final packaging. Line Configuration - Filling Machine - Machine: Tetra Pak Filling Machine - Model: A3 Compact Flex - Year of Manufacturing: 2010 - Format: 200 ml Slim - Capacity: 9,000 packages per hour - Operating Hours: 16,444 Accumulator - Machine: Tetra Pak Accumulator - Model: ACHX 10 - Year of Manufacturing: 2010 - Operating Hours: 15,021 Straw Applicator / Distributor - Machine: Tet ...

Used Bag in Box Filling Line (Manual Operation.) Filling volume 5-20ltr. Pre-made bags with sealing plugs Manual bag feeding, automatic removal of the sealing plug and re-insertion after filling. Capacity: 400-500 Bags/ shift (8 h) Year of construction. 2013, out of service since May 2025 Included: - Syrup tank 6,000 ltr. - CIP preparation - Hot glue auton ́mat with glue guns - Ink-jet encoder - Various pipelines, valves, conveyor belts and platforms. Disassembly by the buyer.

Tetra Pak Aseptic Dosing unit F is a unique and innovative new technique where functional ingredients are injected with high precision into the base product after the final heat treatment, just before filling. Used for UHT applications, providesautomatic aseptic in-line dosing of ingredients. Ingredients that are suitable for aseptic dosing by the Tetra Pak Aseptic Dosing Unit F: dose sensitive ingredients like enzymes e.g. lactase, vitamins, minerals, Omega 3, probiotics, flavours, colours in everything from plain milk to formulated products. The system ensures the survival and stability of heat sensitive function that the charachteristics of the ingredients are not changed. It fits with any filling machine with a capacity between 1.000 - 20.000 l/hr with a continuous flow. The Tetra Pak Aseptic Dosing unit F is fully automated and installed between aseptic processing and the aseptic fi ...

BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 TECHNICAL DATA:  Tetra Pak Automated uht for high acid beverages. The heat treatment in the steriliser is base on plate heat exchanger. TEMPERATURE PROGRAM: FOR TEA: 5Brix Heating: 25°C to 140°C (4 seconds) Cooling: 140°C down to 25–80°C FOR JUICE: 12Brix Heating: 25°C to 120°C (30 seconds) Cooling: 120°C down to 25–80°C CONDITION: BRAND NEW -NEVER USED STILL PACKED IN WOODEN BOXES

Tetra Fino® Aseptic is a cost-effective, pillow-shaped carton package from Tetra Pak that has been specially developed for the aseptic packaging of liquid foods such as milk, juices or ice cream mixes.

Tetra Pak Tetra Therm Aseptic Visco Line for pasteurisation / sterilization of concentrated beverage bases by a Tubular Heat Exchanger (THE) system. Capacity 2.600 up to 8.150 liter per hour. At the current plant the line is used for products up to 100 °C. The indirect heating temperature is up to a maximum of 135 °C. Holding time set at 0 / 5 / 10 seconds. CIP Cleanable., In the Tetra Therm Aseptic Visco system, heating and cooling will take place in Tetra Spiraflo MTC tubular heat exchangers. Modules with a narrow ring section are used for heating and cooling to ensure optimal heat transfer. The product is pre-heated in stages within the Spiraflo tubular heat exchangers. The Spiraflo tubular heat exchanger is equipped with a sliding O-ring system. This means that the product and the outer tubes are not welded together. This prevents stress corrosion cracking and minimizes maintenance ...

The Tetra Pak EasyRide Conveyor is a specialized conveyor system designed for the efficient transport and buffering of beverage cartons in aseptic filling lines

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

A TB 250 ml Base Filling Machine from Tetra Pak is an industrial packaging line that fills and seals liquid food products in Tetra Brik (TB) cartons of 250 ml volume ("Base" format). Forms the carton from a composite material (roll) Fills the product exactly (e.g. milk or juice) into 250 ml portions Seals and forms the typical rectangular "brik" pack Works continuously and fully automatically in a production line Application: • Beverage industry (milk, juices, beverages) • Fresh or non-perishable products (depending on machine type)

The Tetra Pak MultiShrink 62 is an industrial shrink wrapping machine used in filling and packaging lines for beverages and liquid foods. Multipack formation (e.g. 3×1, 4×3 arrangements) Film packaging + shrinking for stable containers In-line operation in automatic production lines High speed for large production quantities Beverage industry (milk, juice, plant-based drinks) Formation of transport and sales packaging Stabilization of products for storage and shipping

Used line for bottling juices into Tetra Rex cartons. 7.000 pcs/h Specifications: Tetra Rex Filling Machine: Type: Tetra Pak TR/27 Year of manufacture: 2016.11. Capacity: 7000 pcs/h Formats: 1 l, 0.5 l 2 Tray Making Machine: Type: Cardboard Packer 32 by Tetra Pak Year of manufacture: 2016.10. Formats: 23, 43 Conveyor 2: Type: Conveyor Control System Year of manufacture: 2016.10.

Used Terta Pak 110 slimTechnical Specifications & Performance DataThis Tetra Pak 110S is a high-efficiency carton filling machine engineered for continuous industrial packaging operations. Built in 2007 and maintained in active service, it delivers robust throughput for beverage production while preserving product quality and line stability. With a capacity up to 12,000 packs per hour, it is well-suited for second hand and used bottling line upgrades where dependable, high-volume performance is required.Manufacturer: Tetra PakModel: 110SYear: 2007Production speed: up to 12,000 per hour (packs/hour)Operating hours: 1,551Container type: Carton packagesCompliance: CE markedDrawing Spec.: 630451-0300Advanced Automation & Control SystemsDesigned with industrial-grade automation, the Tetra Pak 110S integrates a centralized HMI for clear status visualization, recipe handling, and alarms, enabli ...

Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph Upgrade in 2024, excellent condition and warranty on the replaced spare part Overview of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers advanced aseptic filling performance for dairy-based beverages and fruit juices. Originally, Tetra Pak manufactured this A3 FLEX 100V model in 2006. However, in 2024, the company upgraded it to the 100V version. As a result, the machine now complies with modern standards for process control, performance, and operational safety. Therefore, it remains a highly relevant and reliable option for current production needs. Packaging Format and Technical Configuration The Used Filling Machine A3 Flex supports the 1000 ml Edge format, a version of the Tetra Brik package that features an inclined top edge. Consequently, the design improves ergonomic handling an ...

Spare welding controllers for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

Butter Forming & Wrapping Machine Manufacturer: Trepko Type: XPG40 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k

Stoving oven Techno Grafica EBO 850; good condition; cleaned and tested; Working width 850mm; Spühlgumminung Techno Grafica SPG 850; good condition; cleaned and tested; Working width 850mm. Backing oven Techno Grafica EBO 850; good condition; working width 850mm; cleaning unit Techno Grafica SPG 850; good condition; cleaned and checked; Working width 850mm.

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

Transnorm Rising falling Incline with arch belt conveyor GF 6200-800-900-800 RA2180 Technical data: Conveyor length (NL): 7000 mm (6200 mm incline + 800 mm arch) frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7000 ( 6200 + 800 ) Nominal / outside width ...

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Vortex Flowmeter 8800, F020SD1N3D1I1M5, Rosemount, EEx, new Manufacturer: Rosemount Type: Vortex 8800, F020SD1N3D1I1M5 Ex protected Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

2930-12-334-9277 / 0052000675

1 mixing arm with bottom discharge screw all stainless steel right-left turn 1 speed dimensions (l x w x h) : ± 2.500 x 1.050 x 1.700 mm with new control box + control (Siemens logo) all new cables

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.

For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 7.100€ net plus VAT If you are interested, please contact us to confirm availability.

Sinumerik 805 SM-TW with plug-in cards, New!, New, Siemens, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Sinumerik 805 SM-TW, consisting of: 1 piece Sinumerik basic rack, 805 SM-TW, 6FM2805-1WB00, 1 piece battery plug-in unit 6FX1410-0CX46 1 piece Sinumerik power supply, 6EW1861-3BA, 1 piece Sinumerik CPU, 6FX1138-5BB04, 1 piece Sinumerik basic memory module, without RAM, 6FX1128-1BA00 - sold! 1 piece Sinumerik 805 SM T/W software, 6FX1882-0BX22-4D, 1 piece Sinumerik 805 SM T/W basic software module 1, 6FX1882-0BX01-4D, Attention: All parts are new! These prices are absolute best prices and are only valid for the purchase of the whole position. We also sell the parts individually, see separate Ebay listings.  ...

Height rippler, parallel rippler -Max. working height: 800 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 380/90/H855 mm -Weight: 7.5 kg

Machine crossing with platform (bridge) 4570-880-2600 RA1996 Technical data: Manufacturer: In-house production Type: machine crossing with pedestal Condition: very good (used) Total size: 4570-880-2600 mm (WxDxH incl. handrail) step dimensions: 240 x 800 x 35 mm step/tread height: 200 mm platform dimensions: 850 x 800 mm Platform height: 1400 mm bottom edge 1600 top edge Steps: 8 (7 steps + platform on each side) Weight: 390 kg Next TÜV: 02.2023 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

BOEHRINGER VDF V 800 universal lathe was built in 1977 in Germany. The machine, designed for precision machining of workpieces with a maximum diameter of 800 mm and a length of 1500 mm, is distinguished by its robust construction, which ensures excellent stability during even the most intensive challenges. On the other hand, the spindle features an optimised speed range, allowing efficient turning using both high-speed steel and carbide-tipped tools. All of this makes the BOEHRINGER lathe the perfect choice for both unit and series production. The total weight of the machine is approximately 5400 kg. Technical specifications of the BOEHRINGER VDF V 800 metal lathe - maximum turning diameter above the bed: 800 mm - maximum turning diameter over the slide: 515 mm - maximum turning length: 1500 mm - maximum spindle rotational speed: 1120 rpm - minimum spindle rotational speed: 5.6 r ...

ProJet 860Pro ColorJet Printer 3D printer used by 3D Systems for sale., Accessories: Depowdering station, All specifications and operating/installation conditions are in accordance with the manufacturers brochures. Errors and typographical errors excepted., Layer thickness: 0.1mm, Installation space in mm (x/y/z): 508x381x229, number of nozzles: 5x HP11 printheads, building material: VisiJet PXL Core, LBL 3D printing powder, VisiJet Binder, LBL 3D Binder, communication: LAN (Ethernet), Machine dimensions in mm (wxhxd): 1190x1160x1620, Weight in kg: approx. 370KG empty weight, Dimensions machine in mm (wxhxd): 1190x1160x1620

Extruders 65-50-50 mm. diam.screws, K DESIGN thickness control, Double collection of 1.800 mm., Average throughput rate 200-240 kg/h, total installed power 350 kw, compressed air consumption 330 l/min, water consumption 10 l/min, air pressure 6-7 bar, min-max line speed 0-150 m/min, motor power 234 kw, resistive power 25 kw, reduction ratio 1/6, ac motor revolutions standard 2300 rpm, Cartridge filter changer, power 6.75 kw, Resistive power 32.6 kw, Die diameter 220 mm, Bubble cooling group, Electric fan power 22 kw, RV ironing motor 2.7 kw, Platform rotation 0.4 kw, Diagonal fans 0.75 kw, Speed ​​0-150 m/min, Double winder with calender, Total motor power 6kw, Min./Max. diameter of reels 150/900 mm, Max. reel weight 750 kg, installed power - used power in work: about 60-65% : 350, capacity: 200-240 kg/h, working width: 1.800 mm.

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), Series 80-49 DN Rotor width 800 mm. diam.450 mm. 45 kw motor Granulation chamber 840 x 490 mm. Complete with conveyor belt Feeding hopper N.3 screens available (9-15 mm) Control panel The machine is offered TOTALLY RECONDITIONED, See how we recondition [HERE](.germanplast.eu/pages/photo-gallery), INSTALLED POWER: 45 kw, rotor size: 800x450 mm.

2025 BIG backhoe bucket 80cm with MS03 Symblock attachment, Technical specifications:, - Weight: 191 kg, - Recording width: 80 cm, - Contents: 278 liters, - CAT 4 - suitable for 4.0 - 5.5 t excavators

Doka Box 1.20x0.80m Storage and transport box Doka box 1.20 x 0.80m Storage and transport Box

Linear drive + planetary gearbox, stroke 880, EGC-HD-220-880-TB-0H-GK, 556825 +.., Festo, mint condition Special price The current price of a similar product is € 5381 excluding VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-HD-220-880-TB-0H-GK, 556825, current market price € 4.424 Overall dimensions: 1470x380x120mm, 70kg, Slide length 220mm, stroke 1500mm, A blue front cover and a black round rear cover will be supplied at a later date. 2) Neugart planetary gearbox, PLE120-005-SSSB3AF-E19/40/95/115/B5/M8, 42635, Festo number 552197, gear ratio 5:1, cur ...

Linear slide, toothed belt axis, stroke 800, EGC-185-800-TB-KF-0H-CK, 556817, Festo, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in a very good condition and fully functional. Festo linear slide, toothed belt axis, EGC-185-800-TB-KF-0H-CK, 556817, Festo, second-hand Overall dimensions: 1143x190x170mm, approx. 65kg Table 280x110mm, stroke 800mm, bore for drive shaft 32mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of t ...

Vertices: • Transformer from a well-known German manufacturer • Currently stored directly at the manufacturer – no waiting for production • Fast and uncomplicated delivery • Ideal for time-critical applications or ongoing projects • Manufacturer's warranty is 5 years (starting 01.06.2025)

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display, linear encoder, displacement transducer -Manufacturer: Sfernice, linear displacement transducer -Measured length: 800 mm -Dimensions: 1000/35 / H60 mm -Weight: 1.3 kg

AGFA AccuSet 800 with AGFA Viper Rip. System is completely tested and cleaned. Resolutions: 1200, 1800 and 2400 dpi - the system is complete and includes accuset, supply & recording cassette, APIS cable, CD's, software and dongle. Includes Techkon film densitometer. We will be happy to send you further information and pictures. Available now

Cylinder head F/BFL912/913 Net= 165,- Cylinder head FL812W Net= 345,- Cylinder head FL812D Net= 345,- Cylinder head FL712 Net= 345,- Cylinder head FL612 Net= 395,- (all cylinder heads kpl.with valves ready for replacement available) Piston+female 712/812 Net= 245,- Piston+female 912 Net= 100,- Head screws 912/913 Net= 15,- Head screws BFL913 Net= 15,- Head screws FL712/812 Net= 36,- Head seal kit F/BFL912/913 Net= 9,- Head seal kit FL712-812 Net= 25,- Nozzle insert FL912-913 Net= 30,- Nozzle insert BFL913 Net= 30,- Nozzle insert BFL913- P-nozzle Netto= 45,- all prices subject to change,price changes reserved per piece plus geseinfo@miw-zeven.dtzl.Tax email=

used, kpl. 1 year warranty, plate size 800 x 800 mm, 95 plates, closed drain ( 4-hole), 30 mm cake thickness, pressure 15 bar, capacity approx. 1350 liters, filter area 95m2, dimensions 7500 x 1300 x 2000 mm, weight approx. 7 to

used, kpl. 1 year warranty, plate size 800x800 mm, 50 plates, open drain, 25 mm cake thickness, pressure 15 bar, capacity approx. 660 liters, filter area 53m2, dimensions 5500 x 1600 x 1200 mm, weight approx. 5 to

Wolf cooking kettle with mixing work steam-heated approx. 800 to 900 litres of volume outlet DN 100 at the side