128,416 used machines on RESALE, but how to find them? Machine Search
Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton
x-travel: 860 mm y-travel: 560 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain iTNC530 24-fold automatic tool changer electronical handwheel chip conveyor coolant through spindle device Technische Daten / technical details: X-Weg / X-travel 860 mm Y-Weg / Y-travel 560 mm Z-Weg / Z-travel 600 mm Spindelaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed 0-10000 UpM /rpm Eilgang X,Y,Z / rapid feed X,Y,Z 24,24,20 m/min Tischaufspannfläche / table clamping area 1000x560 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebleistung Spindel 40%ED / drive capacity spindle 40%ED 18,5 kW Gewicht ca. / weight 6.500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are ...
Cambio 800D, 6 Arm AirTen, built in 2018. Well preserved Cambio 800 with 6 x direct drive, latest current model! 90 kW rotor drive! Each individual spiked roller is driven by 4.0 kW each. AirTen rotor with 6 tools. Feed up to max. 120 m/min possible. To sell on behalf of a customer. Machine can be viewed at any time.
Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg
turning diameter: 815 mm turning length: 3000 mm control: ECS 2402 swing over bed: 815 mm centre distance: 3000 mm swing diameter over slide rest: 485 mm spindle bore: 137 mm spindle turning speed range: 1200 U/min rapid traverse: 5 m/min spindle motor: 28 kW tailstock quill diameter: 115 mm tailstock quill stroke: 250 mm total power requirement: 30 kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 5,87 x 2,10 x 2,10 m Equipment: CNC-control E.C.S. 2402 3-jaw chuck 4-jaw faceplate, diameter 700 mm 4-jaw faceplate, diameter 400 mm 3 Steady rests Chip Conveyor Without boring bar holder and boring bar. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: 8.000 mm travel -y axis: 2.600 mm travel -z axis: 1.500 mm control: HEIDENHAIN - iTNC 530 turning speed range: 20 - 5.000 U/min numbers of positions in the tool changer: 60 tool taper: SK50 clamping plate: 10.000 x 2.500 mm CNC Milling machine | SORALUCE - FP-8000 equipped with radio measuring probe, 60-way tool changer and clamping plates. The machine is in good condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FP8000 | FP 8000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cooling tunnel for chocolate enrobing machine, Sollich, type KS 820
Manufacturer: Engel Model: Victory 330H/80L/110 Year of Manufacture: 2008 Type of Machine : Injection Molding Machine.Combi machine for 2-component injection molding (main cylinder is Ø 18mm thermoplastic and L-unit is a Ø 12mm LSR cylinder) Operating hours: 35995h Find more here - / Contact us at -
Manufacturer: Muratec Model: MVS 861 VORTEX Spindles per Machine: 80 Total Spindles: 480 Spindle Type: 1.3 Motor Power: 32 to 33 kw Piecers: 2 per machine Color: Red Blower: Yes Individual Machine Details M/C 1 - Status: Running - Model: MVS 861 - Year: 2011 - Polymaster: No - Motor: 33 kw M/C 2 - Status: Running - Model: MVS 861 - Year: 2011 - Polymaster: No - Motor: 33 kw M/C 3 - Status: Running - Model: MVS 861 - Year: 2011 - Polymaster: Yes - Motor: 33 kw M/C 4 - Status: Running - Model: MVS 2007 - Year: 2007 - Polymaster: Yes - Motor: 32 kw M/C 5 - Status: Running - Model: MVS 2005 - Year: 2005 - Polymaster: Yes - Motor: 32 kw M/C 6 - Status: Stopped - Model: MVS 2005 - Year: 2005 - Polymaster: No - Motor: 32 kw Find more here - / Contact us at -
Control: Heidenhain MillPlus, NC software: 400.00, connected load: 29kVA, length: 3100mm, width: 2400mm, height: 2450mm, weight: 5.7t. Operating hours: 50,213h, spindle hours: 9,297h. Machine is not functional, the control does not start up, cause is a defective system rack and two defective IOB80 boards. An on-site inspection is possible.
Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 38700 € : 739.17 € : Doppelsäulenführung : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 810 mm : 850x810 mm : rund 480 mm, quadrat 480 : 585 mm : 1.5 kW : 4 kW : 0.12 kW : 3900 mm : 1200 mm : 2350 mm : 3080 kg 2° inlined saw band optical height adjustment linear guides control panel security switch pressure adjustment hydraulic vice chip brush hydromechanical blade tensioning coolant pump heavy duty gearbox 1,2 m roller table user manual in GERMAN or ENGLISH OPTIONS: turn table for mitre cuts hydraulic top clamping from above roller tables and band saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Torque: 0,1 Nm 0 Temperature range: 0-60 °C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Strong offer! JCB 8055 RTS Crawler Mini Excavator Year 2017 Only 1,074 operating hours Perkins engine with 47.9 hp (35.7 kW) Operating weight: 5,500 kg Hydraulic quick coupler Auxiliary hydraulics (high-flow) 2 travel speeds Rear view camera Radio Slope bucket + backhoe bucket included
Key data: 800 KW, 400 V
CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...
HERMLE UWF 802 M universal milling machine with HS 401 route control -HS 401- Track control -Travel X / Y / Z 500x430x400mm -Rigid angle table -Speed range 18-3550 rpm -Feed continuously variable in all three axes 0-1600 mm/min -Rapid traverses 0-1.6 m/min in all three axes -Vertical - Horizontal milling device -Tool holder ISO 40 -Hydraulic tool clamping -Central lubrication -Chip tray -Drive power 6 KW -Work light -Spindle protection -Documentation Dimensions LxWxH 1.9x1.8x1.9 meters / Weight: 1800Kg
For sale: JCB 8030 ZTS (built in 2017) Powerful and reliable mini excavator in very good condition! Engine power: 15.28 HP / 20.9 kW Operating hours: only 1190 hours Weight: 3217 kg Automatic / hydraulic quick coupler Additional hydraulics for hammer/shears Rubber tracks Battery Disconnect Switch Joystick control for precise work Includes standard backhoe bucket and ditch/bulldozer bucket Air conditioning for comfortable working
Bobcat E34 (built in 2019) Reliable and compact mini excavator in good condition – ideal for construction, gardening and landscaping work! Engine power: 24.8 hp / 18.2 kW Hours: 825 hrs Weight: 3,476 kg 3-cylinder engine Manual/mechanical quick couplers Quick-change system Rubber tracks Battery Disconnect Switch Joystick control for precise work Air conditioning Radio
Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...
A surface grinding machine is offered. Horizontal grinding spindle, ball-bearing mounted, dual system, hydraulic: infinitely variable table speed, manual: handwheels for individual parts and fine adjustment, flat or V-guides. Inspection possible by appointment.
Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5
A beader, flanging and beading machine for cans by Metal Box Company is available. Can type: 3-piece cans, can shape: round, tool diameter: 150mm, max. can height: 180mm, performance range: 70-280cans/min. An on-site inspection is possible.
Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.
: gebraucht : 3985 : prompt, Zwischenverkauf v : Schweden : 1800 € : 1 : 25 mm : MK 3 : 235 mm : 100 - 2080 (8) U/min : 750 mm : 900 mm : 1550 mm : 250 kg Quill travel by handwheel Height adjustable and swiveling drilling head Cross table with manual feed in X and Y axes Does not comply with the German UVV and Austrian AMVO no operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : Bulgarien : 120460 € : 2276.69 € : 890 mm : 3000 mm : 400 mm : 155 mm : 490 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 105 510,00 turni ...
Key data: 2300 kN, 50 mm
SANDRETTO Serie 9 860/2300 Clamping Force: 230 T - 2300 kN Year : 2001 Distance Between tie bar: 585 x 585 mm Platen Dimensions: 860 x 860 mm Mold Thickness (Min/Max): 210 - 630 mm Opening Stroke: 580 mm Injection Volume: 475 cm³ Material Pressure: 1876 bar Screw Diameter: 50 mm Total Machine Power: 44.2 kW L/D Ratio: 20 Robot Interface: Euromap 12 Weight: 10,500 kg Dimensions: 6.25 x 2.28 x 2.1 m SEF 2000
- banding machine - Standard Version - with the existing accessories
Gas forklift built in 2018 in technically and visually very good condition. Technical highlights: Load capacity: 5,000 kg Mast: 5.2 meters triplex (3-fold) with free lift 4-way control block Joystick hydraulic control Factory steel cab with heating Work lights Very good solid rubber tires 4 fork extensions (MEYER 6-5409N) Further data: Engine power: 80.2 hp (59 kW) Drive: Hydrostatic Hours: 1,863 h Weight: 7,350 kg Tyres: 4 wheels
Forklift from 2018 in very good technical and visual condition. Technical highlights: Load capacity: 4,500 kg Mast: 3-fold mast with free lift 4-fold hydraulic valves Side Shift Fork Positioner Color: Orange Further data: Power: 34 hp (25 kW) Voltage: 80 V Travel speed: 18 km/h Drive: Automatic Hours: 869 h Weight: 7,200 kg
Year of Make: 2010 Engine power: 152 kW Operating hours: only 1,614 h Maximum speed: 40 km/h PTO speeds: 540 / 540E / 1000 - Tyres: Front: 600/65R28 BKT - Equipment & Extras: All-wheel drive Pneumatic system Electronic Hoist Control (ELC) Front hydraulics Front loader Front PTO Front axle suspension Hydraulic steering Comfort cab Air conditioning Crawler gear Load-sensing system Radio
Year of Make: 2008 Engine power: 84 hp / 62.6 kW Turbodiesel, 4-cylinder Operating hours: only 1,216 h Maximum speed: 40 km/h Weight: 3,701 kg Dimensions: Length: 386 cm Width: 185 cm Height: 264 cm Tyres: Front: 380/70R24 Rear: 480/70R3 Facilities & Extras: All-wheel drive (4WD) Front loader Air conditioning Comfort cab
Transnorm Rising falling Incline belt conveyor with leading belt GF 800+4650+560-600-500 RA2494 Technical data: Conveyor length (NL): 6100 mm ( 560 mm arch + 4650 mm riser segment + 800 mm leading ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 6100 ( 8 ...
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 64000 € : 1209.6 € : 80 to : 900 mm : 540 mm : 180 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 280 mm : 380 mm : 7.5 kW : 2010 mm : 1390 mm : 2750 mm : 5400 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BAZ Johnford FMC 850 for sale The machine is built in 1999 and can be viewed under chipboard. Enclosed is a type picture of the machine! Available in mid-June!
x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm table-size: 850 x 440 mm spindle taper: SK 40 control: HEIDENHAIN TNC 355 ATC: 32 Pos spindle turning speed range: 20 - 4000 U/min spindle drive: 5,9 kW quill stroke: 80 mm feeds longditudinal/cross/vertical: 1 - 2000 mm/min power feed x/y/z: 7200 N rapid traverse longitudinal and cross: 10 m/min rapid traverse vertical: 10 m/min total power requirement: 12 kW weight of the machine ca.: 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0187 : prompt, Zwischenverkauf v : 2912 € : 1 mint condition 3 x 835 + 1 x 835 mm sectioned ATTENTION: 50T tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two-side evaporator Goedhart -Type: DVS-p-82637 -Cooling capacity: approx. 43 kW -Fin spinning: 7 mm -Fans: 2 x 630 mm -Dimensions: 2600 x 1820 x 750 mm -Volume: 76 L -Weight: 470 kg -Quantity in stock: 1 -Reference number: CH 604 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work
Evaporator Goedhart -Type: VRB 82457 -Cooling capacity: 20 kW -Fin spinning: 7 mm -Fans: 2 x 450 mm -Dimensions: 2060 x 900 x 750 mm -Stainless steel housing and block -Electric heating -Volume: 34 L -Weight: 200 kg -Quantity in stock: 1 -Reference number: CH 602 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work
The machine is in good technical condition, after prior agreement it is possible to test it. with the Siemens Shopturn system, including the feeder, the machine is fully equipped. BASIC PARAMETERS Working space max. turning Ø: ≈ 410–500 mm max. length: 800 mm distance between spindles: approx. 1020 mm swing diameter above the bed: ~700 mm realistic: ideal for shafts, flanges, bodies up to ~800 mm Travels (axes) X: ~480 mm Y: 100 mm Z: ~800–845 mm B axis: 110 (5-axis machining) C axis: 360 (indexing + interpolation) this makes it a full-fledged turn-mill (not a classic lathe) Spindles main spindle speed: ~5000 rpm power: ~25–34 kW passage: approx. 76–87 mm counter spindle speed: ~6000 rpm milling spindle (main difference compared to a classic lathe) speed: up to 12,000 – 20,000 rpm power: ~19–22 kW taper: HSK-A63 or Capto C6 allows: milling drilling tapping 5-axis simultane ...
Evaporator Goedhart -Type: SRU 81507 -Cooling capacity: approx. 15 kW -Fin spinning: 7 mm -Fans: 1 x 500 mm -Dimensions: 1460 x 930 x 840 mm -Stainless steel housing and block -Electric defrost -Volume: 23 L -Weight: 140 kg -Quantity in stock: 2 -Reference number: CH 600 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work
Key data: 8000 kN, 105 mm
Model: KM 800-6100 MX Year: 2006 Clamping force: 800 T Screw Diameter: 105 mm Operating Hours: 73,100 Robot : Sepro S3 Robot Year : 2006 Mold thickness (Mini/maxi) : 500 x 1100 mm Maximum injection pressure : 1469 bar Maximum distance between clamping plates : 2100 mm Dimension of the clamping plate horizontally : 1600 mm Clamping plate dimension vertical : 1530 mm Injection Volume : 4113 cm³ Injectable Weight : 3743 g Video : Yes
Key data: 8000 kN, 95 mm
Model: KM 800-6100 MX Year: 2008 Clamping force: 800 T Screw Diameter: 95 mm Operating Hours: 64,700 Robot: Sepro S3 Robot Year: 2008 Mold thickness (Mini/maxi) : 500 x 1100mm Maximum injection pressure: 1795bar Maximum distance between clamping plates: 2100mm Dimension of the clamping plate horizontally : 1600mm Clamping plate dimension vertical : 1530mm Injection Volume: 3367 cm³ Injectable Weight: 3064 g Video: Yes
Key data: 9000 kN, 115 mm
STORK SXN 9000-8600 - 900 T Clamping force : 900 T Reference : SXN 9000-8600 Year : 2000 Screw diameter : 115 mm Max. material pressure : 1600 bar Injection volume : 5349 cm3 Injection capacity : 5062 g Injection speed : 599 mm/s Plasticizing: 123 g/s Distance between tie bars : 1010 x 1010mm Column diameter: 190 mm Working hours: 38,900 h Weight of clamping unit: 38,000 kg Weight of injection unit: 11,700 kg
BEKUM BA52 Blow Molding machine Type : BA 52 / S 801 Year: 1993 1 station Clamping force : 450 kN Original BEKUM control Extruder type : S 701 Refurbished 6-liter head with accumulator Head and screws reconstructed Max.bottle volume: 60 Litres Mold dimensions (L x W x H): 1200/750/2 x 150-300 (mm)
Offer 26127 Technical data approx.: - Load capacity approx. 3000 kg - Loading area between side stanchions L 4.00 x D 0.94 m - Loading area without. Side stanchions L 4.00 x D 1.04 m - Loading height approx. 0.7 m - Stake height 0.5 m - Drawbar length 1.1 mm - Length with drawbar approx. 5.9 m - Drawbar can be mounted on both sides - Width approx. 1.1 m - Weight approx. 450 kg - Tyres air 460 x 140
x-travel:1400 mm y-travel:1200 mm z-travel:1350 mm control:MSX- 701 Mapps III table surface area:800 x 800 mm rapid traverse:50 m/min table rotating:360.000 x 0,001 B-Achse ° table load:2,0 t numbers of pallets:2 turning speed range:8000 1/min power capacity - milling spindle:37 kW no. of tools in the magazine:60 Stück tool taper:HSK-A 100 weight:31 t dimensions:5,9 x 3,48 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - Parts program memory 1 MB - Knoll 70 bar high pressure and filter system - Electrostatic oil dust collector LTA - elect. hand wheel - renishaw probe - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis
:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...
faceplate diameter:800 mm power requirement:110 kW weight of the machine ca.:37.000 / total 52.000 t transport measurements machine:5,07 x 2,98 x 3,90 m clamping diameter:800 mm :Ø 800 x 720 mm Tool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis
Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com
maximum number of results exceeded
please refine your search
