127,272 used machines on RESALE, but how to find them? Machine Search
Key data: 800 kN
Arburg 420S 800-350 Year of Make: 2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Spray pressure: approx. 1300 bar Dosing volume: 288 cc Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Integrated original Arburg sprue picker on the side Dimensions: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...
Arburg 420C 800-250 Year of Make: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Spray pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 1300 kN
Arburg 520S 1300-800 / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air Valve x 2 Hardened injection unit - Bimetal The machine was regularly serviced by the authorised service Arburg in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...
Key data: 2000 kN
Arburg 570H 2000-800 e² / Hybrid machine / Production line with the Arburg Multilift Select robot Year of Make: 2011 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lu ...
Arburg 820S 4000-2100/400 / Production line with the Sepro Industrial Robot SR S5-35 S3 Trans robot / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Spray pressure: 2500 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced Injection Units – Bimetal Proportional valve on vertical injection unit – precise injection ...
CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions
Cylindrical grinding machine manufactured in 2022. This ELMAG CG 800 features a maximum grinding diameter of 200 mm and a grinding length of 800 mm. It is equipped with a robust headstock spindle and transverse feed guide, ensuring precision in grinding operations. If you are looking to get high-quality grinding capabilities, consider the ELMAG CG 800 machine we have for sale. Contact us for further details.
Veneer technology Wolkenstein veneer assembling machine LZM-LA SE 800 ex location for sale.
We offer industrial equipment for restaurants, bakeries, cafes. Everything is in working order, used. We are open to negotiations on price and delivery. Refrigerator NOVUM, 805L
6 feeders, Hand feeder, Cover feeder, Stitching unit, 2x 52/8 stitching heads, Trimmer, Spare knifes, books tools and standard parts Machine nr: 08.004
FOR SALE 2 ENGINE MARINE IVECO YEAR 1999 HOURS 15 000 LOADED NOW IN FRANCE
Key data: 5000 mm, 8000 mm, 4000 mm
Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...
Complete plant (production) for paving stones: Gravel feed Mixer Main Engine 844AZ Stacking system Strapping system
This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information.
Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.
Manufacturer: Terex Finlay Model: 883 Year of Manufacture: 2010 Machine Type : Mobile heavy duty screener Operating hours: 8867 h Find more here - / Contact us at -
Manufacturer: Keyence Model: IM-8000 Type: Image Dimension Measurement System Software Version: B-13.0.0.28-11.07-20.07.09.01 / A2.05-A1.27-A3.03-9B.06-9B.06-02.01-03.02 Sensor: 20-megapixel CMOS Stage Size: 300 x 200 mm Measurement Capacity: Up to 300 features in a single measurement cycle Condition: Used, fully functional Find more here - / Contact us at -
Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TECHNICAL DATA: Table size: 980 x 750 mm Tilting table Flywheel size: Ø 800 mm Saw blade length: max. 5770 mm / min. 5680 mm Installed power: 4 kW
CNC verical machining center Type: DMC 835 V Manufacturer: Deckel Maho Year: 2006 Control: Heidenhain iTNC 530 Total hours: 20,579 Spindle hours: 6,598 X: 835 mm Y: 510 mm Z: 510 mm Tool magazine: 20 positions Spindle cone: SK 40 Chip conveyor Accessories: weldon holders collet clamps, about 40 pcs vihorlat 160 vices 2 pcs other vices, clamps, washers Machine in good condition, under power Find more here - / Contact us at -
x-travel: 6.500 mm y-travel: 1.800 mm z-travel: 1.300 mm control: HEIDENHAIN TNC 640 clamping table: - surface area: 8.000 x 1.100 mm max. workpiece weight: 13.500 kg/m² Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° Hirtverzahnung Constant Power at 100 % ED: 37 kW Speed range, stepless: 15 - 7.000 min-1 max. torque: 1.045 Nm tool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mm workpiece length: 400 mm weight of tools max.: 20 kg internal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 35.000 mm/min max. feed force X-Y-Z-axis: 16.000 N total power requirement: kW weight of the machine ca.: 34 t dimensions of ...
Sumbel Herold 800 banding machine; cleaned and tested; Working width 800mm; suitable for cold glue. Gluing machine Sumbel Herold 800; cleaned and checked; working width 800mm; used for cold glue.
B&A REF: 9272 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC
B&A REF: 8838 TON: 820 SCREW DIAMETER: 93MM SHOT WEIGHT: 2555 STROKE VOLUME: 2777CM3 INJECTION PRESSURE: 1478AR PLATEN SIZES: 1730 X 1560MM DBTB: 1250 X 1060MM MIN MOULD HEIGHT: 350MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1150MM MAX DAYLIGHT: 2250MM EJECTOR STROKE: 350MM CONTROLS: SEF 2000 CORE PULLING: 3 AIR VALVES: 2 MOTOR: 93 HEATING CAPACITY: 41KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC
Alpha PRPA Production Rubber Process Analyzer Model 86042 Serial number V62AAA0095 With a production outer shell which protects operators With 5 sample auto loader with the option of using 4 rolls of film or 2 interchangeably 230 VAC 7.5 AMPS 50/60 HZ 1725 VA Max 120, Min 80 CE marked Year 2011
Presse à injecter NEGRI BOSSI 800 T Vector type 8000H-8400 Année : 2018 Nombres d’heures. : 25 000 heures? Commande : TACTUS? Force de verrouillage : 800 T? Diamètre vis : 110 mm? Volume injectable : 5160 cm3 Poids en PS : 4720 gr? Pression d’injection : 2020 bars? Dimensions des plateaux : 1670 x 1580 mm? Distance entre colonnes : 1100 x 950 mm? Epaisseur moule max : 1200 mm? Moteur de dosage électrique? 2 noyaux hydrauliques 4 soufflettes? Interface robot?
Binder heating system Wood chip heating Type RRK 640-850 Year of construction 2013 For steam and hot water production Heating capacity up to 850 kW Maximum operating temperature up to 150 °C Maximum operating overpressure 12 bar Water capacity 1520 litres Hydraulic insertion from the right front side (instead of stoker auger) Heat exchanger separately Without material feed from the bunker Flue gas cleaning via cyclone
Coolers for Glunz+Jensen Plate Developing Machines; Model 8735001001; cleaned and tested; suitable for Glunz+Jensen plate development machines. Chiller for plate processors Glunz+Jensen; Model 8735001001; cleaned and checked; used for Glunz+Jensen plate processors.
x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Thermal CTP Year 2009 -Plate Count: Approx 39,000 plates done -Exposure Time: 4,500 hours -Internal plate punch system -Blower Unit External Screen BU 800 -Min Plate Size: 450 x 370mm; Max Plate Size: 1160 x 940mm. -Maximum Imaging Area: 1160 x 924mm. Plate Thickness: 0.15 - 0.30mm. -Resolution: 2400/2438/2540 dpi, 16 diodes -Productivity: Up to 10/12 plates/ph at 2400 dpi (dependent on plate type and size) -Included RIP Harlequin HQ510PC, computer and monitor -Available immediately, totally refurbished in our warehouse
This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details.
Biete Woodward Stellgerät mit der Teilnr. 340597 for sale.
A vertical CNC 5-axis machining center POS is available. Travel X/Y/Z: 670mm/820mm/600mm, rotary table diameter: 800mm, max. table load: 1200kg, tool positions: 96, tool holder: HSK-63, speed: 18000rpm, A-axis: -100°/120°, C-axis: 360°, weight: approx. 20000kg, control: Heidenhain, operating hours: 22177h, spindle hours: 9601h. Including infrared probe, IKZ and Blum laser tool measurement. Documentation available. An on-site inspection is possible.
A Kittner food conveyor is available. Width: 600mm, total length: 8300mm, motor power: 370W, belt speed: 6.6m/min, angle: 31.5°, conveying height: 3300mm. Documentation available. An on-site inspection is possible.
pressure: 30.0 t chamfer lenght: 800 mm back stop - adjustable: max. 420 mm stroke of upper beam: 100 mm dayligth: 310 mm working feed: 10.0 mm/sec return speed: 12.0 mm/sec Control: VISION 120 oil volume: ca. 38.0 l voltage: 380 V total power requirement: 4.5 kW weight of the machine ca.: 890 kg dimensions of the machine ca.: 1250 x 950 x 1900 mm current new price approx. 24.000 euros special price on request Equipment: - electro-hydraulic NC press brake - easy to operate - UNITRONICS VISION 120 NC control system for press depth back gauge (Y X axis) - NC electro-motorized back gauge (X axis) Input of target/actual value possible 2x manually adjustable stop fingers - Operation front right - Many different insert/bending tools Top tool holder : AMADA/PROMECAM - 1x freely movable foot switch - EMERGENCY OFF button at the front - Rear safety device - operating instructions The data ...
Key data: 8000 kN, 3743 g/PS, 105 mm
Year of Make: 1999 Clamping force: 800 tons Screw diameter: 105 mm Injection weight: 3743 gr./hp incl. Removal robot Wittmann Protective enclosure The machine has been regularly serviced and is in good working condition
max. format 78 x 120 cm Year of construction 2012 Fully Automatic Paper Folding Machine Computer control with touch screen Navigator Control Pallet feeder with Vaculift and Vacubelt 4 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Knife shaft cassette 2 folding swords in the crossfold section Automatic folding blade adjustment 1 more fold pocket after the 1st cross break Palamides alpha 500 Stacking Delivery Delivery date: immediately from stock
Injection moulding machine Engel DUO 4550/800 BJ 2004
used
Key data: 90 mm, 30 , 110 U/min
used 90 mm extruder with strand nozzle, water bath and strand granulator
Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. The machine is currently set on 10 gram. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil at the first folding station, the machine will stop. Mechanical belt driven outfeed conveyor of ± 1.000 mm, mounted 90° on the machine to the semi automatic case packer, Benhil 8534. The Benhil 8304 ma ...
Fully automatic cup filling and lid closing machine which can be used for packing soft and easy to pump products like butter, herb butter, etc. into tubs and close the cup with a snap cap cover (no sealing). The machine was rebuild in 2004. Rectangular with round corner format, ± 95 x 60 mm for filling ± 80 up to ± 150 gram.The butter is feed with an ± 200 liter hopper. Stainless steel dosing station. The speed can be adjusted by a frequency converter up to 80 cups per minute. Outfeed conveyor. Vacuum pump with the machine (Busch). Control panel with frequency converter., Type of Machine: Butter tub filling and lidding machine, Capacity: ± 700 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: ± 80 up to 150 gram, Packaging Size: Rectangular with round corners, ± 95 x 60 mm, Year of refurbishing: R2004, Motor power: 2,2 kW, Weight: ± 1.400 kg
Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine was serviced by the previous owner and is in a as good as new condition with new controls with frequency converter (renewed in 2023). The machine is only used some weeks for trial production by the previous owner. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed by a direct connection with compensator (build on the machine) or with a hopper with agitator screw inside, mechanically drive from out of the main machine (loose delivered wit h the machine). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print ...
maximum number of results exceeded
please refine your search
