tba 8 tetra used for sale

Key data: 1000 , 3420 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2001 Machine with very low working hours Type: 1000-8000 NC4 Clamping Force: 1000 T / 10 000 KN Screw Diameter: 110 mm Theoretical Injection Volume: 3801 cm³ Injection weight. : 3420 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Total Installed Power: 110 kW Oil Capacity: 2000 L Dimensions: 13.2 m x 3,20 m x 2,90 m Weight: 63 tons Machine sold with a STAR robot

sheet width - max.: 0850 mm coil weight: 5,00 t coil internal dia.: mm Belt thickness: 1,00 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Including coil lifter, feed unit, control panel, hydraulic unit, control cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

CNC vertical machining center Type: MCV 800 QUICK Manufacturer: MAS Year: 2018 Control: Heidenhain TNC 620 X: 800 mm Y: 500 mm Z: 550 mm Table: 1000 x 500 mm Max table load: 600 kg Spindle speed: 12000 rpm Spindle cone: ISO 40 Tool magazine: 24 positions Workpiece + tool probe Heidenhain TS/TT 460 Central automatic lubrication Cooling through the spindle center (20 Bar). Machine in good condition, under powet Find more here - / Contact us at -

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

ACS850-04-290A-5+E210+J400, ser.nr. 1152901315, ACS880-01-246A-3+E200, 132kW, 241A, ser.nr. 1174301299

Diesel Generator 8kW 230V 50Hz Weight 530kg

Technical data Pressure: 4.5 kN Table surface: Length: 170 mm Width: 145 mm Depth of throat: 100 mm Overall dimensions machine: Length: 380 mm Width: 300 mm Height: 700 mm

General SKU397X1141 MakeDSP TypeEF800 No.WS-153 Mach.No.WS-153 Year of construction1999 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.5 m2 Specified Features - Nutsche filter MaterialStainless steel 1.4571 (316Ti) Nutsche filtercheck Nutsche filter/dryercheck Filter surface0.5 m2 Capacity400 l Vessel sizesø 800 x 620 mm Vessel can be tiltedcheck Top connectionscheck Liquid outletcheck With jacketcheck Max. temperature165°C Cake capacity400 l Information LocationBarneveld Mounted on wheelscheck Floorspace1,52 x 0,8 m Total height2 mNutsche filtersDSPFilters > Nutsche filtersBrand > DSP What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...

General SKU397W1234 MakeMinox LocationBarneveld CEcheck TypeMTS-V2-800/1 Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5m² Number of sieve decks:1 With covercheck InletDia. 100/200 mm OutletDia. 300 mm Drive vibro motor2x 0,22 kW, 230-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) Information No.X10695 Year of construction2020 Mounted on mild steel framecheck Floor space1,40x1,00 m Total height0,50 m Weight180 kg Extra SpecificationsWithout sieveVibro sievesMinoxSieves > Vibro sievesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

General SKU397W1235 LocationBarneveld CEcheck MakeMinox TypeMTS-V2-800/1 Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5m² Number of sieve decks:1 OutletDia. 300 mm Drive vibro motor2x 0,22 kW, 230-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) Information No.X10696 Year of construction2020 Mounted on mild steel framecheck Floor space1,40x1,00 m Total height0,40 m Weight190 kg Extra SpecificationsWithout sieve and coverVibro sievesMinoxSieves > Vibro sievesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU337U832 MakeIpros doo Posoda LocationBarneveld TypePosoda 80 L Pressure Working pressure0 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume80 Ltr. Motor0.37 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity112 ltr Vessel sizesDia. 450x500 mm Dished bottomcheck Dished top sidecheck With covercheck DN 400 Top connectionscheck 30 mm Outletcheck 20 mm With jacketcheck Volume 17 Ltr. Max. temperature80ºC With propellor stirrercheck magnetic stirer Motor230/400 volt, 0,37 kW, 925 rpm Speed mixing shaft925 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information No.P342/04 Year of construction2004 Mounted on legscheck with wheels With switchgearcheck Floorspace0.78x0,78 m Total height1,2 m Weight290 kgStirring vesselsIpros dooStirring vessels > Stirring vesselsBrand > ...

Transnorm conveyor belt GF 820-600-500 RA2471 Technical data: Conveyor length (NL): 820 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 820 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery: w ...

Injection moulding machine Arburg 820S 4000-4600 BJ 2016

Various used Lenze frequency converters available Tested before delivery (or preset to your engine)

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

B&A REF: 9273 TON: 210 SCREW DIAMETER: 52MM SHOT WEIGHT: 435 STROKE VOLUME: 480CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 710 X 780MM DBTB: 510 X 570MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 540MM MAX DAYLIGHT: 1170MM EJECTOR STROKE: 225MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 HEATING CAPACITY: 20KW

B&A REF: 9271 TON:800 SCREW DIAMETER: 110MM SHOT WEIGHT: 4720 STROKE VOLUME: 5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES: 1550 X 1400MM DBTB: 1100 X 950MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1080MM MAX DAYLIGHT: 2180MM EJECTOR STROKE: 350MM CONTROLS: TACTUS CORE PULLING: 3 AIR VALVES: 4 MOTOR: 37 + 37 HEATING CAPACITY:37 KW ROBOT : STYRAM S10-L SERVO SCREW DRIVE: ELECTRIC

4-tons afroller Richtunit (6 + 5 rollen) amp; snijunit (3 snijmessen)

This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine.

This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, its ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine.

This WAGNER WDE 800x2000 was manufactured in 2010. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Ideal for those looking to enhance their turning capabilities. Contact us for more information.

This DMG ecoMill 800v was manufactured in 2016. It features an impressive X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG ecoMill 800v vertical machining centre we have for sale. Contact us for further details.

Manufacturer: Keyence Model: IM 8020 Year of Manufacture: 2023 Find more here - / Contact us at -

This 3-axis KOVOSVIT MAS MCV 800 QUICK was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 550 mm. The machine includes a robust table size of 1000 x 500 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 800 QUICK vertical machining centre we have for sale. Contact us for further details.

General SKU268N284 MakeKLEIN VAKUUMTECHNIK GMBH No.8765 Year of construction2000 Mounted on framecheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume235 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature180 Number of compartments:1 Capacity235 Ltr Internal width600mm Internal depth650mm Internal height600mm Electric heatingcheck With trays2 MaterialStainless steel Information LocationBarneveld Floorspace1,2 x 0,9 M Total height2,0 M Extra Specificationswith vacuum pump, brand Leybold, type D16BDrying ovensKlein VakuumtecnikDryers > Drying ovensBrand > Klein Vakuumtecnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine.

General SKU316S539 MakeAPV Products LocationBarneveld Type884 Pressure Working pressure10.34 Bar Working pressure jacket10.34 Bar Main Features MaterialStainless steel Motor11 KW Surface2.7 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(2x) Number of stages:2 Heating surface2,7 m2 Cylinder sizesdia. ? x 2050 Max. temperature204 degr. C With jacketcheck Max. temperature204 degr. C Inletdia. 70 mm Outletdia. 70 mm Motor11 kW 380-400/660-690 Volt (2x) Speed207 rpm Information No.9150 Year of construction1995 Mounted on framecheck Floorspace3,7x1 M Total height1,5 M Weight1900 KgScraped surface heat exchangersAPV ProductsHeat exchangers > Scraped surface heat exchangersBrand > APV Products What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any d ...

This 4-axis MCM CLOCK 800 MP4 was manufactured in 2000. It features a Fanuc 16 I control, X-axis travel of 700 mm, Y-axis travel of 700 mm, Z-axis travel of 800 mm, and a B-axis rotation of 366°. Equipped with a high-speed spindle at 20,000 rpm and a high-pressure system at 65 Bar. It includes a chip evacuator and a tool magazine with 72 positions. Contact us for more information about this machine.

General SKUR1215 LocationBarneveld MakeDiosna (D) Main Features MaterialStainless steel Volume800 Ltr. Motor55 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Universal mixercheck Capacity800 ltr. Vessel sizesdia. 1200x700mm With covercheck Inletdia. 250mm (1x) dia. 20mm (1x) dia. 100mm (1x) dia 50mm (1x) dia. 32mm (2x) Pneumatic operated outletcheck Outletdia. 200mm With motor55 kW 400 volt (Ex) Rotor speed127 rpm With lump breakercheck With motor13 / 16 kW 400 volt (Ex) Rotor speed1435 / 2930 rpm Information TypeP-800B Mach.No.294-009 Year of construction2004 Mounted on framecheck With switchgearcheck Floorspace2,7x1,9 M Total height2,9 M Weight5000 Kg ATEX compatiblecheckUniversal mixersDiosnaMixers > Universal mixersBrand > Diosna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...

This 3-axis Dugard 850VMC was manufactured in 2007. It features a maximum spindle speed of 8,000 rpm and an impressive X/Y/Z travel of 850 x 520 x 510 mm. The machine includes a robust table size of 1000 x 510 mm. If you are looking to get high-quality machining capabilities, consider the Dugard 850VMC vertical machining centre we have for sale. Contact us for further details.

General SKU418S1034 MakeMVG-Metallbau- und Vetriebs- GmbH Type8000304 Machine number22569/91116 Year of construction1991 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket3.5 Bar Main Features MaterialStainless steel Volume427 Ltr. Surface2.84 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel trayscheck Heating surface2,84 m² Drying chamber capacity427 Ltr. Drying chamber sizes670x950x670 mm Max. temperature95 °C Number of trays5 Tray sizes600x945x25 mm Distance between the trays95 mm With 1 doorcheck With vacuum pumpcheck Motor2,2 kW 220-380 Volt MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1x1,5 M Total height1,9 M Weight1450 KgTray dryersMetallbau- und VertriebsDryers > Tray dryersBrand > Metallbau- und Vertriebs What you can expect from Foeth: -- Machine is in working ...

This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine.

General SKU219N105 MakeRhewa Type82basic T5646 TC7033 Mach.No.103758 Main Features MaterialMild steel Specified Features - Miscellaneous transport MaterialMild steel Miscellaneous transport Capacity0,4 - 150 KG Information LocationBarneveld Extra Specifications230VAC/50|60Hz/15VAMiscellaneous transportRhewaConveying systems > Miscellaneous transportBrand > Rhewa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine.

SIPA Band Saw Model 800 TOP made of steel: - upper spoke flywheel, full lower flywheel - Motor 4 kW / 5.5 HP, 380 volts - with upper and lower blade guide - tilting table

This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.

Key data: 800 kN

Boy 80 M Year of Make: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Spray pressure: 2085 bar Dosing volume: 147.6 ccm Clamping unit : Clamping force: 80 t Tiebar spacing: 410x358 mm Size of the clamping plates: 680x555 mm Ejector: hydraulic Clamping unit: toggle lever Control: Procan CT Additional equipment: Dimensions: Weight: 3200 kg Length/Width/Height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 10.4 kW Total power: 25.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Tool milling machine MAHO MH 800 -Travel X/Y/Z 700-350-450mm -Table surface 940x510mm -Spindle holder SK 40 -Spindle speeds 32-1600 rpm -Automatic longitudinal/transverse feeds -Automatic feed / vertical milling head -Coolant device -Various tool holders -More technical data / See photos Dimensions: LxWxH 1.9x1.7x1.9 meters / Weight: 3500Kg Errors / input errors excepted Hjbkn Ausvbrf Ae S Tsl

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

Butter-Homogenizer / Microfix, fationalizes the processing and packaging of cold store butter by reducing the time of defreezing (butter having a temperature of ±4 °C can be homogenized by the Microfix, homogenizing butter having lower temperatures depends on the consistency of the butter). Automatic adaption of the Microfix to the output of the combined packaging machine by means of a feeler switch is possible (not on the machine at this moment). Improving the quality of the butter by ensuring finest water dispersion resulting in an increased shelf life of the homogenized and packed butter. Likewise, the spreadability of the butter is improved. Reducing the loss of water during the packaging operation. The Microfix is adapted to the actual quality of butter by means of a variable feed worm drive, rotors having different numbers of knives (this machine is equiped with a stainless steel ...

Key data: 1000 kN

Engel Insert 80V/80V/100 2F/2-K Ti-bar-less Machine, Vertical / Perfect Technical Condition Year of Make: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Ti-bar-less machine with two vertical injection units, with turntable Air Valve x 6 Hydraulic core pull x 2 Control with hot runners x 12 Infrared protective curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by the authorized service provider Engel in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started b ...

General SKU203S014 MakeFilmac srl S/L Filtration (It) LocationBarneveld CEcheck TypeFiltropressa BC-800.40(35).25 Pressure Working pressure16 Bar Main Features MaterialPolypropylene Pressure16 Bar Surface33.6 m2 Specified Features - Filterpress Filter presscheck Filter surface38,3 m² Recessed chamber platescheck Number of platens35 Internal platen sizes740x740 mm External platen sizes800x800 mm Platen thickness60 mm With membranes on platenscheck Cake capacity191,6 Ltr. Central inletdia. 80 mm Connectionsdia. 80 mm With outlets on platenscheck Hydraulic closingcheck With hydraulic unitcheck Motor14,4 kW 230/400 Volt MaterialPolypropylene Information No.91137 Year of construction2000 With switchgearas is Floorspace5x1,6 m Total height2 m Weight4500 kgFilterpressesFilmacFilters > FilterpressesBrand > Filmac What you can expect from Foeth: -- Machine is  ...

x-travel: 700 mm y-travel: 350 mm z-travel: 450 mm table surface area: 940 x 510 mm spindle taper: SK 40 spindle turning speed range: 32 - 1600 U/min feed - longitudinal/cross: 8 - 400 mm/min feeds vertical: 4 - 200 mm/min total power requirement: 4,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 kN

Arburg 420C 800-250 Year of Make: 1999 Injection unit: Screw diameter: 35mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced injection molded parts for the medical industry - pure production conditions Euromap 12 Robot interface Core train control Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...

Key data: 1600 kN

Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimeta ...

Arburg 420C 800-250 with the Wittmann W721 robot Year of Make: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Spray pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 2 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Original Tool Crane Robot Wittmann W721 Year of Make: 2007 4-axis robot: 3 axes are driven by servo motors (electric); Axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Pu ...

Key data: 800 kN

Arburg 420C 800-250 with the Anvil+Langbein sprue picker Year of Make: 1999 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit : Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core train control Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On  ...