tba 8 tetra used for sale

Electric motor, three-phase motor, pump motor -Manufacturer: Linn Pumps, pump motor without pump -Type: TP 80E -Power: 0.75 kW -Speed: 2900 rpm -Shaft: Ø 16 x 20 / 18 x 40 mm -Design: B3/B14 -Protection rating: IP54 -Dimensions: 328/157/H190 mm -Weight: 11.3kg

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE M10/PCN 806733 -Connection: 10 mm -Dimension box: 135/95/H50 mm -Weight: 0.2 kg

Balancing valve, shut-off valve, ball valve -Manufacturer: Alco, ball valve, unused, original packaging -Type: BVA 058/PCN 805 779 -Connection: 16 mm -Price: per piece -Quantity: 2 pieces -Cardboard dimensions: 220/80/H80 mm -Weight: 0.5 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 88 teeth -Weight: 9,5 kg

The Benhil Microfix rationalises the processing and packaging of cold store butter. The machine reduces the time it takes to defrost butter, it improves the quality of the butter by creating the finest water dispersion and improves the spreadability of the butter. Microfix 8471 butter homogeniser Capacity: up to 1.400 Kgs/Hour Rotor motor power: 20 HP Feed worms motor: 3.8 HP Manual included Length: 200 cms Width: 90 cms Height: 170 cms Weight: Approx. 900 Kg Made in : Germany

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Saw blade: Ø 605 x 6 mm -Inside: Ø 80 mm -Hole circle: Ø 120 x 22 mm -Number of teeth: 88 t -Weight: 9 kg

Butter Forming & Wrapping Machine Manufacturer: BENHIL Type: 8380 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm - Bolt circle: Ø 100 x 17 mm -Number of teeth: 80 teeth -Number: 4x available -Price per piece -Weight: 5.7kg/pcs

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve -Manufacturer: Bosch, valve with solenoid coil -Type: 0 820 006 103 -Quantity: 1x valve available -Price: per piece -Dimensions: 230/70/H65 mm -Weight: 0.9 kg/pc.

Specifications: - Span width approx. 850 mm - Clamping surface height approx. 700 mm - Clamping block depth 300 mm - Total height with clamping base 750 mm - Clamping base dimensions 850 x 450 mm - Clamping holes M16 - Distance of the clamping holes 40 mm - Number of clamping holes per side 336 pcs - Total number of clamping holes 772 pcs - Internal dimensions of the clamping block 380 x 220 mm each - Wall thickness of the clamping areas approx. 40 mm - laterally screwed on 3 jaw lining 300 mm - side-screwed hydr. Machine vice RÖHM - Jaw width 200 mm - Weight approx. 700 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 165 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 330/53/H53 mm -Weight: 1.65 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 600 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Dimensions: 825/95/H95 mm -Weight: 7.2 kg

Electric motor, three-phase motor -Manufacturer: Holz-Her, electric motor type 80S-4 -Power: 550 W -Speed: 1350 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Dimensions: 270/210 / H160 mm -Weight: 8.5 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Bosch, pneumatic cylinder type 0 822 351 008 -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm / M12x1.25 -Dimensions: 445/75 / H70 mm -Weight: 1.9 kg

Maximum pressure: 9 tons Pressing force: 1.94 kg/cm² Bale size: 770x600x500 mm Bale weight: - Power supply: 400 V/4 kW Year of construction: 1997 Productivity: - Price: on request

WARTSILA 8L32 CRANKSHAFT STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS

Hello all We have in our stock in istanbul Turkey 2 x WARTSILA 8R32 CRANKSHAFTS, STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS Please contact us at : info@fin-marine for more info

Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS8 1200 x 2200 -Price: per piece -Number: 2 pieces -Dimensions: 2240/680/H280 mm -Weight: 66 kg

Gear motor, electric motor, electric gear motor, angular gear motor, automatic band saw -Manufacturer: Ruhr gear, angular gear motor -Type: NDK 8760 -Speed: 3000 rpm -Voltage: 200 V/0.15 A -Shaft: Ø 10 x 30 mm -Accessories: V-belt attachment incl. -Dimensions: 245/160/H155 mm -Weight: 4.5 kg

transformer -Marcus: M3785OT 80C RISE -VA: 1000 VA -Frequency: 60 Hz -Voltage: 230/120 V -Price: per piece -Number: 2 pieces available -Dimensions: 160/130/H110 mm -Weight: 11.3 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 245/62/H40 mm -Weight: 1.15 kg

Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 320 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Max. Pressure: 16 bar -Price: per piece -Number: 2 pieces -Dimensions: 545/93/H93 mm -Weight: 6.75 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimensions: 640/28/H28 mm -Weight: 0.95 kg

Specifications: - BIA tested welding suction device - Articulated suction arm 3000 mm - Air volume flow approx. 1000 m³/h - static pressure 2700 pa - Filter area approx. m² - Filter control - Light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 104/66/H73 mm -Weight: 0.8 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 340/30/H30 mm -Weight: 0.6 kg/piece

3.6kW 3000m³/h 4200 PA as good as new

pressure: 200 t distance between columns: 1600 mm max. ram stroke: 600 mm dayligth: 900 mm table width: 1600 mm table depth: 1300 mm table height: 1060 mm ram surface: 1600 x 1300 mm T-slots: Din 650 / 22H12 rapid traverse: 400 mm/s return speed: 325 mm/s pressing speed: 42 mm/s bei 40% mm/sec pressing speed: 20 mm/s bei 100% mm/sec die-cushion pressure: 800 kN die cushion stroke: 150 mm speed of die cushion: auf 68/ ab 225 mm/s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm : 28 mm table height: 450 - 800 mm : 500 kg weight of the machine ca.: 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, short stroke cylinder -Stroke: 25 mm -Piston diameter: 40 mm -Piston rod: 12 mm -Quantity: 1 piece -Dimensions: 73/55/H62 mm/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Dimensions: 320/97/H97 mm -Weight: 4.5 kg

Spare parts for the cleaning system HAMO / Amsonic, type T-840 consisting of the following parts: - Feeding transformers - Parvalux gear motors - Diaphragm pumps & valves - Drain valves - Pressure pipes - Level switch - Dosing pumps - Flow meter - PH probes - Conductivity transmitter

COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 80 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 5 pieces -Dimensions: 219/30/H30 mm -Weight: 0.40 kg/piece

Footplate, site fence foot, barrier foot -9 pieces: TL plastic footplate -Price/fee: complete -Dimensions: 820/420/H110 mm each -Weight 27 kg/piece -Total weight: 246 kg

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

Workbench, work table, assembly bench -Width: 2300 mm -Depth: 815 mm -Height: 845 mm -Thick worktop: 40 mm -Drawer: 1 -Cabinet door lockable: 1 -Shelves: 2 -Price: per piece -Number: 2 pieces -Weight: 114 kg/piece

Stacking boxes, stacking boxes, steel boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers -Sheet metal container with: lid -Dimensions: 615/800/H910 mm -Weight: 54 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 280/65/H65 mm -Weight: 2.2 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 665/52/H52 mm -Weight: 2.45 kg

BENHIL BUTTER PACKER MODEL : 8311 FORMAT : 250grams Capacity : 40pcs/min Hopper Feed Condition : Fully Refurbished

I sell the spraying automat Renojava yr. 2013 Working width 80mm Element thickness up to 80mm Feeding bands length: 1,60 + 2,60m Technology break 200mm / Element length min. from 300mm. Total length: 4,40m Ring arm system for guns from each side Pump included. Feeding system with motors. Good condition. Available immediately.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 484/53/H53 mm -Weight: 1.8 kg/piece

FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 7 pieces -Dimensions: 230/46/H46 mm -Weight: 0.7 kg/piece

Control: Siemens 840D Shopmill Country of origin: Germany Spindle speed n-1: 12,000 Spindle motor kW: 14 Z - Travel mm: 510 Y - Travel mm: 510 X - Travel mm: 835 Rapid traverse m/min: 30 Tool holder: SK 40 Table load: 800 kg Clamping surface mm: 1,000 x 560 Base area of the machine mm: 2,100 x 2,700 Machine weight approx. kg: 4,200 Linear scales Axis A Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy SPINDLE BEARINGS NEW!

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 6 pieces -Dimensions: 343/28/H28 mm -Weight: 0.85 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 100 mm -Piston rod: 25 mm -Price: per piece -Number: 2 pieces -Dimensions: 735/115/H115 mm -Weight: 11.7 kg/piece

used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2018 Machine no.: 6152.324. Series No.: 570001118 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)