tba 8 slim used for sale

Overbeck Rising falling Incline belt conveyor with overdrive vorrun GF 800+5260-600-500 RA2461 Technical data: Conveyor length (NL): 6060 mm ( 800 mm vorrun + 5260 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 120 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6060 ( 800+5260 ) Nominal / outside wi ...

Key data: 1500 kN, 45 mm

Stork S+S1500-850 Year of Make: 2011 Clamping force: 150 tons. Screw diameter: 45 mm Max opening distance: 480 mm Injection pressure: 2100 bar used for PP thin-wall packaging

Injection moulding machine Krauss Maffei KM 800-5700 BJ 1999 Technical data on request

Screw diameter: 120 mm Injectable volume / Shot volume: 5598 cm3 Injection pressure : 1137 bar Column passage / Bettween tie bar: 1060 x 1060 mm Mould thickness mini-maxi / Mould tickness mini-max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 Hydraulic Cores / 4 Corepulling

Vakona ESK 850 STL-B incl. loading, top condition

Mash Tun 5bbl working capacity, vertical cylindrical stainless steel vessel, with side entry door. Sparge Bridge with CIP spray ball. 2 section lift of lid. 2 section drilled plate floor. Year of Manufacture: 2015 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU427W1353 MakeAviteq TypeR800/2 19EUVDX4 No.10301400001 Year of construction2010 LocationBarneveld Main Features MaterialStainless steel Length1000 mm Width200 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width400 mm Feeder diameter200 mm Feeder length1000 mm Feeder height750 mm Closedcheck InletDia. 215 mm OutletDia. 170 mm With vibro motor2 x 0,30 kW,(380-415 volt, 1500 rpm, (Ex)) MaterialStainless steel 1.4301 (304) Information Floorspace1,1 x 0,7 m Total height0,75 m Weight90 kg CEcheckVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

bore capacity in steel (diameter): 25 mm throat: 220 mm bore stroke: 110 mm taper MK: 3 MK table-size: 350 rund mm feeds: mm/U turning speeds: 100 - 2080 U/min connected load frequency: 400 V total power requirement: 0,9 KW weight of the machine ca.: 0,2 t dimensions: 0,8 x 0,6 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 820 mm turning diameter over slide rest: 575 mm turning length: 3300 mm centre height: 410 mm : mm spindle bore: 125 mm spindle turning speed range: 7,1 - 1400 U/min total power requirement: 22,0 kW weight of the machine ca.: 6,0 t dimensions of the machine ca.: 6,3 x 1,6 x 2,0 mm Lathes with: - Digital readout - Rapid traverse - Röhm 3-jaw chuck 315mm - 4-position tool post - 2 steady rests - Coolant system - Emergency stop device - Machine light - Chuck guard - 2 chip trays - Spare jaws (internal and external) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis Hurco TMX 8MYS lathe was manufactured in 2013. It features a maximum turning diameter of 336mm and a swing over bed of 508mm. The distance between centers is 724.5mm, and it includes live tools with 12 positions in the turret. Ideal for precision machining, the Hurco TMX 8MYS machine we have for sale offers robust performance and versatility. Contact us for further details regarding this lathe.

5UKBBL / 800Liter Brewery Stainless Steel, Insulated & Clad in Wood. Mash Tun with Wedge-wire Floor Plates & Front Manway. Copper with 18kW & 12kW Elements (both new) & Copper Dome Top. Hot Liquor Tank with 2 x 18kW Elements; One New. 3 x Fermenting Vessels with Temperature Probes, Tops & Lids; Raised On Stainless Steel Legs. Cold Liquor Tank, raised on Stainless Steel Legs. Underback / Hopback Vessel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine.

This MELCHIORRE ELC 800 7S was manufactured in 2000. It is a surface grinding machine featuring a maximum wheel diameter of 800mm. Consider the opportunity to buy this MELCHIORRE ELC 800 7S surface grinding machine. Contact us for more information.

This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information.

This Saeilo Contur MMV 810 S vertical machine center, manufactured in 2012, features a Siemens 828D control system with an electronic handwheel for precise operation. It has 6224 duty cycle hours and 1821 spindle hours. The traverse paths are X = 810mm, Y = 400mm, Z = 500mm, with a 900 x 400mm table featuring 3 T14 slots. It includes a double arm tool changer with 20 slots, a BT-40 tool holder, and a high-performance spindle reaching 10000 rpm with oil cooling and a 20 bar internal coolant supply. Contact us for more information.

This 4-axis DMG MORI NHX 8000 horizontal machining centre was manufactured in 2023. It features a Siemens S840D control with CELOS, XYZ travels of 1,400 / 1,200 / 1,350 mm, and a pallet size of 800 x 800 mm. The spindle operates at 16,000 rpm with a power of 85 kW and uses an HSK-A100 taper. Tool storage capacity is 60, and it includes a Renishaw OMP60 probe. For more information about this horizontal machining centre, please reach out to us.

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.

This 5-axis POSmill H 800 U was manufactured in 2018. It features a 670x830x600 mm travel range, a swivel range of -120 to 120 degrees, and a continuous 360-degree rotary table. Equipped with an 18,000 rpm milling spindle, 96-position tool changer, and Heidenhain iTNC530 control, this universal machining centre is ideal for complex machining tasks. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information about this machine.

This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine.

This OMRON Quattro 800HS with Platform P30 robot arm was manufactured in 2021. It is designed for precise and rapid handling tasks in various industrial applications. Contact us for more information.

This 3-axis Matsuura V.PLUS-800 was manufactured in 2003. It features a spacious table of 1150mm x 550mm with a loading capacity of 500kg, and a robust spindle speed ranging from 40 to 12,000 RPM. Ideal for precise and heavy-duty machining. If you are looking to get high-quality milling capabilities, consider the Matsuura V.PLUS-800 machine we have for sale. Contact us for more information.

This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine.

This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine.

This vertical machining centre FEELER FV-800A was manufactured in 1995 and is equipped with a Mitsubishi Meldas 520AMR control system. The machine features a 20-position tool magazine. Consider the opportunity to buy this machine. Contact us for further details.

This 3-axis Feeler PVF 800 vertical machining center was manufactured in 2012. It features a spindle speed of up to 8,000 rpm, a tool changer with 22 tools, and rapid traverse rates of 24/20/15 m/min in X/Y/Z. The machine includes a Renishaw TS27R automatic tool setter and through-spindle cooling. If you are looking to get high-quality milling capabilities, consider the Feeler PVF 800 machine we have for sale. Contact us for more information about this machine.

This 3-axis WEMAS VZ 860 APC vertical machining centre was manufactured in 2011. Ideal for precision machining, it features robust construction and reliable performance. Consider the opportunity to buy this WEMAS VZ 860 APC vertical machining centre. Contact us for more information.

pressure: t plate thickness: mm no. of strokes: Hub/min total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm Rising falling Incline belt conveyor with arch GF 2900-8100-600-500 RA2464 Technical data: Conveyor length (NL): 11000 mm ( 2900 mm arch + 8100 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 11000 ( 2900 + 8100 ) Nominal / outside width in mm: 600 Belt width in ...

This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, its ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information.

This 3-axis HERMLE UWF 802M was manufactured in 1994. It features a robust table size of 800 x 500 mm, capable of handling a maximum load of 500 kg. Equipped with a Heidenhain TNC control unit, it offers precise control with spindle speeds up to 6,300 rpm and rapid traverse rates up to 5,000 mm/min. Ideal for demanding machining tasks. Contact us for more information about this machine.

Surgical Mask /foodpad /fruit pad / meat pad Production Line for Sale ype : Surgical Mask /foodpad /fruit pad / meat pad Production Line for Sale Year(s) : 2020 Quantity : 1 Location : Seller or machines location: MIDDLE EAST Last check : 06 Dec. 2025 Description meat pad, fruit pad, food pad , surgical mask production line The 3-ply mask production system offered here combines efficiency and safety features with a first-class mask of type II / IIR optimized for high wearing comfort. The integrated extra module "Single Pack" enables the mask production machine to pack each mask individually wrapped at full speed of up to 800 masks / min. The film rolls also have an autosplice function, so that the system weld the film together on the fly while unit operation. The mask is made up of 3 layers of non-woven material: - An outer layer of spunbond - A meltblown filtratio ...

This 3-axis DMG ecoMill 800 V was manufactured in 2016. It features a robust SK40 spindle with a speed of 12,000 rpm and a 30-station tool magazine. The machine supports a maximum workpiece weight of 800 kg and includes a built-in coolant system with a high-pressure 20 bar filter. Additional features include a swarf conveyor and Renishaw touch probe. If you are looking to get high-quality milling capabilities, consider the DMG ecoMill 800 V machine we have for sale. Contact us for more information.

This 5-axis Mazak VTC 800/30SR was manufactured in 2014, featuring a robust 155-tool ATC, 15 bar through-spindle coolant, and a KUKA robot for enhanced automation. It includes a technology package for 5-axis milling and a robot interface, making it ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information about this machine.

This MORARA REU 800 cylindrical grinding machine was manufactured in 2018. It features a center height of 255 mm, a maximum grinding length of 600 mm, and a distance between centers of 700 mm. Equipped with a Siemens PLC CNC control and a Marposs measuring system, it is overhauled and CE compliant. Currently under power and visible. Contact us for further details regarding this machine.

Transnorm conveyor belt GF 800-600-500 RA2431 Technical data: Conveyor length (NL): 800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1.42 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 1,42 scope of delivery: without supports and s ...

This sawing machine was manufactured in 2000 by KALTENBACH. The KBS 851 DGNC features a miter tilting capability of -60° left and -50° right, accommodating material dimensions at 90° up to 850 x 500 mm. It supports various saw blade types including M2, M42, and M51, with a cutting speed range of 20-120 m/min. Includes an integrated chip tray and Proficut control software. Ideal for steel profile cutting in construction and trade. For more information about this sawing machine, please reach out to us.

This KEYENCE IM-8020 optical measurement machine was manufactured in 2023. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-8020 optical measurement machine. Contact us for more information.

Round profile pliers Z50 2.500kg 300-800mm North Griffin Load handling devices NP >2.5000€ like new, not used

This BRANDT KDF 890 2CU edgebander was manufactured in 2011. It features a joint trimming unit, gluing unit, snipping unit, pre-milling unit, shaping trimming unit, profile scraper blades, surface scraper blades, buffing unit, and grooving unit. Consider the opportunity to buy this BRANDT KDF 890 2CU edgebander. Contact us for more information.

Alpha Alpha RPPA Production Rubber Process Analyzer Model 86042 Serial number V62AAA0095 With a production outer shell which protects operators With 5 sample auto loader with the option of using 4 rolls of film or 2 interchangeably 230 VAC 7.5 AMPS 50/60 HZ 1725 VA Max 120, Min 80 CE marked Year 2011

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

Telescopic Belt Conveyor/Telescopic Conveyor/Conveyor Belt -approx. 22.8 meters length Manufacturer: Caljan Condition: very good, used Model Type: CB4H 7.5/15.3-800 Serial No.: 204279 Year of Make: 2017 Drive: Hydraulic Total length retracted: approx. 7500 mm Total length extended: approx. 22800 mm Total width incl. control cabinet: approx. 1650 mm Total width without control cabinet: approx. 1200 mm Belt width: approx. 800 mm Strap type: smooth Conveying height incl. feet: approx. 970 mm Including control cabinet Circuit diagrams included Internal Article Number: 2026020801 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, b ...

This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

Key data: 4 KW

The Nord SK 112M/8-2 BRE 40 TF is a pole-switchable three-phase asynchronous motor from NORD DRIVESYSTEMS. Technical details Motor type: Pole-switchable motor for two fixed speeds. Number of poles: 8/2-pin (low/high speed). Power: Typically approx. 4.0 kW at high speed (reference value for 112M size). Brake (BRE40): Equipped with a spring-applied brake and a braking torque of 40 Nm. Motor Protection (TF): Integrated thermistor (PTS) to monitor winding temperature. Additional options (WUTFZ): Customer-specific winding or fan modifications (often for operation on frequency converters or special cooling types). UNUSED

This Arburg 470 A 800-170 was manufactured in 2008. A vertical injection moulding machine with a closing force of 80 tons, operating on 400 V 3∼, 50 Hz. It features a total connected load of 69 kVA. Consider the opportunity to buy this Arburg 470 A 800-170 vertical injection moulding machine. Contact us for more information.

Key data: 3000 mm, 850 mm, 800 mm

For sale Doosan 5-axis machining center type 850 LSR. equipped with a Fanuc control system, Key technical data (VCF 850LSR Travel (X/Y/Z): 3000 / 850 / 800 mm Table dimensions: 3500 x 870 mm Maximum table load: 3500 kg (incl. integrated turntable) Integrated rotary table (C-axis): Ø 800 mm B-axis (spindle inclination): 220° (+110° / -110°) Spindle speed: 12,000 rpm (standard) Spindle power: 18.5/22 kW (Fanuc) Spindle taper: BT40 (BIG-PLUS) Tool magazine: 60 stations (chain magazine) Rapid traverse (X/Y/Z): 40 m/min Machine weight: approx. 24,000 kg The machine is available from stock, subject to prior sale. For more information; Send an e-mail to chrismachinematch.nl

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

fire: Taurus, model: C872HD, Year of manufacture: 2010, box length: 7.0 meters, Box / Bale section: 900 x 600 mm, Pre-compression device: Sheet pre-compressor, Shearing force: 800 tons