tba 8 slim used for sale

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 1282 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 123 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/perkins-1006-6-pump-800-bar-used/17 876, , = More information =, , Type number: 1006-6 POMP 800 BAR

automatic baler Manufacturer: HSM Type: VK 8818 R-FU Year of construction 2021 Operating hours: approx. 81 Technical data: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Practical throughput: approx. 50 % of the previously mentioned theoretical performance Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg Optionally with: Press feed belt Manufacturer: ? from ...

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Working Hours: 250 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 56 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/iveco-aifo-8041-i-40-55-pump-used/1 7874, , = More information =, , Empty weight: 895 kg, Type number: 8041 I 40.55 POMP

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/iveco-8045se-pump-580-mh-used/17870 , , = More information =, , Year of construction: 1010, Type number: 8045SE POMP 580 M³/H

Excavators, track widening for excavators, wheel spacers -Manufacturer: Eurorubber, track widening for excavators -Part No.: ZR804550 -Material: Rubber -Dimensions: see photos / technical drawing -Suitable for various excavator models -Dimensions: Ø 820 x 65 mm -Weight: 31 kg

Motor mount, electric motor console, motor bracket, electric motor mount, motor holder, motor support, base frame, machine support, substructure -Base frame: as a motor mount or similar use -Height 1780 mm -Receiver: Groove 68 x 20 mm, dimensions see photos -Dimensions: 1210/810/H1780 mm -Weight: 95 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Electronicon, Capacitor MKP 18 µF -Type: E12.D78-401 800 -Number: 2x capacitors present -Price: per piece -Dimensions: Ø 35 x 105 mm -Weight: 0.1 kg/pc.

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Air Cooled , Engine Color: Red , Working Hours: 1041 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Power: 198 Kw, Rated Speed: 2300 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/218821, , = More information =, , Type number: 8JT POMP 473 M³/H

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 641 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 625 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 825 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 1253 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/leroy-somer-49-1l9a-c6-4-gener ator-825-kva-used/338, , = More information =, , Type number: 49.1L9A C6/4 GENERATOR 825 KVA

Manufacturer: Jac Year of manufacture: 2023 Condition: , 1 year warranty( display unit) Cutting thickness: 4-30 mm Speed: 120-240 slices per minute Control: Touchscreen Knife: Teflon round knife for versatile bread types Knife drive: Planetary-geared knife Electrical: 230V / 1Ph / 0.75kW Dimensions (T x B x H): 380 x 340 x 160 mm

This 5-axis DN SOLUTIONS DVF 8000 was manufactured in 2022. It features impressive X-axis travel of 1,020 mm, Y-axis travel of 850 mm, and Z-axis travel of 805 mm. The machine includes a maximum workpiece diameter of 1,000 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DVF 8000 universal machining centre we have for sale. Contact us for further details.

Engine Brand: FIAT, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 380 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 88 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 110 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 167 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/fiat-821-i-generator-110kva-us ed/728, , = More information =, , Year of construction: 1010, Empty weight: 2.290 kg, Type number: 821-I GENERATOR 110KVA

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 4826 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 753 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 890 , Generator Hz: 50 , Generator Volts: 415/220 , Generator Amps: 1238 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/219425, , = More information =, , Type number: SC6340 GENERATOR 890 KVA

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 395 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 550 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/218739, , = More information =, , Type number: 8QTCA GENERATOR 395 KVA

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Rated Power: 342 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 400 , Generator Hz: 50 , Generator Volts: 415 , Generator Amps: 488 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/218737, , = More information =, , Type number: 80TCA GENERATOR 400KVA

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 373 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 320 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 460 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/detroit-diesel-8v92ta-generato r-320kva-used/203, , = More information =, , Empty weight: 4.300 kg, Type number: 8V92TA 8083-7405 GENERATOR 320KV

Heidenhain RON 705 18000 02S09-04 355 879-01

Heidenhain RON 806.C0000 - 36000 311 266 04

This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details.

PARKER PSA Nitrogen Generation Plant – 600 Nm³/h – 99.5% Purity (2016-2019) Complete industrial PSA Nitrogen Generation Plant designed for continuous 24/7 operation, producing high-purity nitrogen directly on-site. The plant is based on Pressure Swing Adsorption (PSA) technology and includes air compression, air treatment, nitrogen generation and storage systems, delivering up to 600 Nm³/h of nitrogen at 99.5% purity with fully automatic operation. Technical Specifications. • Technology: PSA (Pressure Swing Adsorption) • Manufacturer: Parker - Nitromatic • Nitrogen production capacity: 600 Nm³/h • Nitrogen purity: 99.5% • Maximum nitrogen outlet pressure: 7 bar(g) • Continuous operation: 24 hours/day • Fully automatic operation • Integrated alarm and monitoring system • Continuous oxygen analyser with purity display • Ultra-dry nitrogen produ ...

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 4850 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 220 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 275 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 418 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/cummins-nta-855-g-generator-27 5-kva-used/122, , = More information =, , Empty weight: 2.610 kg, Type number: NTA-855-G GENERATOR 275 KVA

Engine Brand: VOLVO, Condition: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-tad580-83ve-core-for -parts/17906, , = More information =, , Type: Engine, Empty weight: 600 kg, Type number: TAD580-83VE

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Blue , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 162 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/iveco-8361-sri-10-used/226 , , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 8361 SRI 10; Transport weight [kg]: 980

Engine Brand: IVECO, Condition: USED, Bore: 115 mm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/iveco-8361-si-10-00-used/5 45, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 8361.SI 10.00; Transport weight [kg]: 840

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 358 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-8v1600-g20f-new/251, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 8V1600 G20F; Transport weight [kg]: 1585

This 3-axis Soraluce SM 8000 Bed Type Milling Machine was manufactured in 1999. It features an impressive X-axis travel of 6,250 mm, Y-axis travel of 1,200 mm, and Z-axis travel of 1,500 mm. The machine includes a spacious table dimension of 8,000 x 1,100 mm and a powerful 30 kW spindle. If you are looking to get high-quality milling capabilities, consider the Soraluce SM 8000 machine we have for sale. Contact us for further details.

A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

For sale 2 second-hand ALSTOM electrical transformers, in good general condition, from an industrial facility. Features: Brand: ALSTOM Power: 800 kVA Type: Three-phase transformer Frequency: 50 Hz Cooling: Oil (ONAN) Condition: Pre-owned Quantity Available: 2 units These transformers are ideally suited for industrial plants, MV/LV networks, production sites, logistics platforms, biogas plants or any project requiring a reliable power supply. ✔ Hardware available immediately. ✔ Visit possible by appointment. ✔ Loading on trucks possible. ✔ Transport in France and internationally on request. Price: Contact us. Do not hesitate to contact me for more information, additional photos or to arrange a visit.

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 358 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-8v1600-g20f-new/125, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 8V1600 G20F; Transport weight [kg]: 1700

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 54.6 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c3-3-8lj-51595 13-new/692, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 400 kg, Type number: C3.3 8LJ-5159513

Engine Brand: FIAT-IVECO, Conditie: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 300 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/104117, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8281-22; Transport weight [kg]: 1800

Engine Brand: CATERPILLAR, Conditie: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: No , Starter Voltage: No Starter Present , Rated Power: 350 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/28468, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 3408C 48W - 8N1843; Transport weight [kg]: 1850

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 410.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1900 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 3850 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3412e-80m-1496 377-used/770, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 80M-1496377; Transport weight [kg]: 2500

; Gross weight [kg]: 10500; Engine: 4012-46TAG3A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000

weight max. in kg: 600 kg fork length: 1150 mm stroke height: 2700 mm total power requirement: ? kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Weingarten Mechanics Press 800 to Year of construction 1999 Nominal pressing force from 12.7 mm before UT 8000 kN Working stroke rate 10 - 40 strokes/min Setup stroke number 5 - 15 stroke/min Plunger stroke 200 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 980 mm Table top dimensions, length x width 3600 mm x 230 mm Plunger plates dimensions, length x width 3600 mm x 23 Passage between the uprights in length 3600 Passage between the uprights in width 2300 Standard infeed height above press table 750 mm Inlet height adjustment range 620 - 800 mm Quick Tension Plunger Plate: Hollow piston cylinder, variable 4 pcs. on each side Too ...

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3512-8br-17552 85-used/266, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 8BR-1755285

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 362 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71tti-708 2-7300-used/803, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71TTI 7082-7300; Transport weight [kg]: 1700

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 362 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-8v71tti-708 2-7300-used/801, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8V71TTI 7082-7300; Transport weight [kg]: 1700

LCD monitor with electronic for Cybelec DNC 800, 804, 806 control . only a few years in use. Supplier / Manufacturer : TSUBIS Germany , Art Nr: LCD10-0072

This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details.

This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details.

A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.

Basic dimensions: Width: approx. 2,890 mm Depth: approx. 1,100 mm Height: approx. 1,000 mm Note: - The images are used to illustrate the material. - The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. The scope of delivery includes: 02x Workbench stand, used Material colour: sendz. galvanized Stand height: 1,000 mm Stand depth: 1,100 mm Profile dimensions: 90 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench crossbar, used Material colour: yellow Box profile: 120 x 50 mm Clear width: 2,700 mm 08x Screw M10x35 08x Nut Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only a ...

Vogelsang MP 825 pallet racking system Vogelsang pallet racking system (type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per field (spread over 4 levels, each with 3 Euro pallets next to each other with a field width of 2,700 mm). The facility consists of 1 basic field and 7 cultivation fields and results in a total length of approx. 22 meters. Thanks to the grating shelves, the rack can be used extremely flexibly – even for general cargo, picked goods or damaged pallets. Maximum safety is ensured by the push-through protection devices and rear wall grilles included in the scope of delivery. The perfect protection against unintentional pushing or falling of pallets and loads. Manufacturer: Vogelsang Type: MP 825 Length: 22000 mm Height: 6200 mm Depth: 1200 mm Span: 2700 mm Fields: 8 Levels: 4 incl. floor space Truss type: IN ...

Block moulding machine Type: 860 AZ Manufacturer: Zenith Year: 1988 The board machine has been operated continuously at the same location since it was commissioned in 1988. For sale is not only the block machine itself but also the entire production line. The system can be used in full after purchase. The block machine was operated in a two-shift system until the end of 2023 and was then decommissioned. The plant is still complete and can be inspected at any time upon request. MACHINE DATA Block forming machine: Board machine from manufacturer Zenith, type 860 AZ, year of manufacture 1988 Production of core and face mix Control system: Simatic S5 with Zenith visualization Board size: 1,400 × 950 mm Maximum product height: 14 cm Quick mould clamping system, pneumatic Production line: Hydraulic pusher with proportional valves on the wet side Elevator with chain transport, ...