tba 21 used for sale

Nozzles, injectors, diesel engine nozzles -Type: 214 5079 Quantity: 10 pieces available Price: per piece -Weight: 0.4 kg

- Condition: Presentation Machine - Usable volume: 210 L - on Weighing Cells

Knapp roller conveyor accumulation 2160-510-450 RA2381 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 2160 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 nominal voltage: 24V Engine type: Interroll EC 300 Roll division in mm: 60 Conveyor speed m / s: frei einstellbar bis 1,25m/s Jam detection: Lichtschranke Convey ...

Viessmann TectoDeck SV3 refrigerated cabinet – perfect for the presentation of refrigerated goods in supermarkets and shops. With a length of 2.1 metres, two rows of shelves and a lower shelf, it offers plenty of space for your goods. The ergonomic design allows for the best view of the goods and easy handling. Thanks to environmentally friendly refrigerant, flexible installation and only one power connection (230V), the refrigerated cabinet is immediately ready for use. The electronic control via the worm system and the red and white VI LED lighting ensure optimal product presentation. Specifications: • Length: 210 cm • Depth: 107 cm • Height: 160 cm • 2 rows of shelves plus lower shelf • Temperature range: -1°C to +2°C • Electrical supply: 230 V / 50 Hz • Refrigerant: R290 • Energy consumption / 24h: 28.54 kWh • Defrost heater: 870 W • Lighting ...

Manufacturer: Weger Zuluftgerät, Type: ZL 2113, Year: 2013, Control: no, Kw output: 22, Heizmedium : Warmwasser, Temperatur vor-rücklauf: 70/90, Taschenfilter Typ: yes, Fresh air m³/h: 42000, Fresh air m³/h: 42000, Year :2013

Key data: 1340 mm, 150 mm

SPECIFICATIONS: Machining width: 1340 mm Processing height: 150 mm Steel calibration roller: Ø 200 mm Sanding belt length: 2100 x 1400 mm Installed power: 17 kW

Key data: 660 mm, 2100 mm

4 nos. Buzuluk 84" Mills available! Drilled Rolls, Rollerbearings, electrical Nip adj., Bullgear Drive 2 x left Hand Drive 2 x Right Hand Drive Description attached!

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Ref. №: 4018 Sausage line The line include: HP10 E type 161 Continuous vacuum filler for straight filling and portioning Machine features: All in one 250 l hopper Standard double screw Standard double screw housing Integrated CAN-bus control: Graphical display Double screw drive with 7.0 kw AC servo Infeed scroll drive with 4 kw ac motor with frequency inverter Nominal output, total: 14 kw ;21 A VEMAG lifting and tipping device for HPE with 250 l hopper To fit standard trolley, 200 l capacity VEMAG high-performance linking machine for identical lengths with casing magazine LPG 209: For linking and portioning all common types of casing in identical lengths With casing magazine for collagen, polyamide or cellulose casings For sausage calibers from 13 to 40 mm For shirred casing lengths up to 430 mm For sausage lengths from 20 mm to approx. 400 mm Nominal ...

Transnorm conveyor belt GF 2100-400-300 RA2405 Technical data: Make: Transnorm Model: TS 6565 motor-driven belt diverter D=65mm Conveyor length (NL): 2100 mm Frame width (NB): 400 mm, 600 mm with motor Belt width (GuB): 300 mm Overall height (BH): 200 mm Support feet: optionally available Conveyor speed (v m/s): 2.0 Drive: Nord Electrical data: 50Hz V380-500, kW 1.1 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 condition: Ausstellungsstück Conveying length in mm: 2100 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: Nord KW: 1,1/S1 Conveyor speed m / s: 2 scope of delivery: without supports and side guides For indi ...

Pressing and joint-setting machine Book height : 100 - 520 mm Book width : 120 - 450 mm Book thickness : 6.5 - 100 mm Output : approx. 150 books/hour (depending on the material used)

We sell 280x DIMM DDR4-2133 8GB ECC reg DR Samsung M393A1G43DB0-CPB 144x DIMM DDR4-2133 16GB ECC reg DR Samsung M393A2G40DB0-CPB 8x DIMM DDR4-2133 8GB ECC reg DR Samsung M393A1G43DB0-CPB In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices ...

; Gross weight [kg]: 2440; Inspection Date: 2026-09-02; Amount of previous owners: 1; Lift height[mm]: 1900; Maximum lift capacity [kg]: 215

Cutting length: 5300 mm Cutting height: 0-2.150, 80-2.050 mm automatic: Option ja/nein ELCON precision panel saw type ADVANCE 215 Partnership Edition -------------------------------------- Technical description: Cutting height: vertical: 0-2,150mm, horizontal: 80-2,050mm Cutting length: 5,300mm Cutting depth: 80mm (with clamps: 55mm) Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth Saw blade rotation: 5,000 rpm. Motor: 5.5 kW, including automatic star-delta start Required air pressure: 6 bar Measurement reading for horizontal saw cuts: -over scale from 0 - 2,070mm -via strip cutting stop from 75 - 500mm Measurement reading for vertical saw cuts: -over scale from 0 - 1,300mm Extraction connection: 1 x 100mm 1 x 120mm Features: -ADVANCE clamping system, consisting of: 2 pneumatic clamps, those on vertical axes are motorized on a ball screw from above move down. The tongs carry  ...

amplification -fold: 100 diameter: 560 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: 350 t dimensions of the machine ca.: 650 x 1000 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KUKA KR 210 L150-2 2000 6-axis robot The KUKA KR 210 L150-2 2000 (2000 series) is a powerful 6-axis industrial robot that has been specially designed for an extended reach with a high payload. The abbreviation "L150" signals the arm extension (long version), which raises the maximum reach to 3,100 mm, while the nominal payload is 150 kg. Main technical data Maximum reach: 3,100 mm Nominal load capacity: 150 kg Additional load (arm/swingarm): 50 kg / 100 kg Number of axes: 6 Repeatability: ± 0.06 mm Net weight (without steering): approx. 1,285 kg Degree of protection: IP65 (standard) Mounting Position: Floor Axis data (range of motion & speed) The 2000 series is characterized by high-torque drives that ensure high dynamics despite the large arm extension: Axis 1 (A1): ±185° | Max. speed: 86°/s Axis 2 (A2): +90° to -61° | Max. speed: 84°/s Axis 3 (A3): + ...

Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg

; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060

Key data: 430 mm, 1000 mm, 430 mm

Turning length: 1,000 mm Turning diameter over bed: 430 mm Turning diameter over slide: 255 mm Spindle speeds: 19 - 2,000 rpm Spindle bore: 56 mm Equipped with: - Various Multifix tool containers - Coolant device Country of origin: Germany Motor power: 7.5 kW Machine LxWxH: 360 x 103 x 130 cm Machine weight: 1800 kg

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 35 + 70 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m SPECIAL PRICE! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR The dat ...

Hydr. Hacksaw KASTO HBS 210 / 240Masch. No. 1116 145 220 Year of construction 1994Saw range at 90 round 210 mmflat 240 x 190 mmsquare 210 x 210 mmat 45 round 150 mmSaw blade length 400 mmStroke rates 62 / 125 strokes per min. Material support height: 500 mmMotor power: 0.5 / 0.75 kWNerg connection: 400 volts, 50 Hz- Drive motor with 2 speeds- Coolant pump in the machine baseSpace required: L x W x H: 1200 x 500 x 1200 mmWeight: 170 kgGood condition; used

Technical Specifications & Performance Data The Used Bertolaso Inspector 2002 Push 210 is a compact, reliable inspection station engineered for quality assurance on a used bottling line handling still wine in glass bottles. Designed to monitor fill-level accuracy and closure presence, it helps producers maintain consistent packaging quality and reduce downstream rejects in beverage production environments. Manufacturer / Model: Bertolaso Push 210 Year: 2002 Category: Inspector (Inspection type: 2 – fill level and closure presence) Condition: READY FOR OPERATION Container types: Glass (inspection station primarily configured for glass bottles) Bottle formats: 0.06 L, 0.375 L, 0.75 L Product types: Wine (still) Core functions: Automatic minimum/maximum fill-level control; cap/cork presence check; automatic reject to external area Auto-calibration: Continuous self-calibration using the pr ...

; Gross weight [kg]: 2440; Inspection Date: 2026-07-17; Amount of previous owners: 1; Lift height[mm]: 1900; Maximum lift capacity [kg]: 215

Dismantled / disassembled by the sellerACEC, 9.0 kW, 380 V, 3~50 Hz, 970 rpm380 V, 3-phase, 50 Hz

range L-W-H: 2300 x510 x 1500 mm weight: 145 kg : 20 St. Equipped with 4 high-performance castors, two with brakes. Heavy duty wheels 150 x 40 mm. All drawers are equipped with anti-slip mats. Equipped with 2 robust stainless steel handles. One lock for the door and 1 lock for all drawers. Solid wood panel 4 cm thick. Solid ball bearing guides (double bearings) for the drawers 10 drawers 12 storage boxes 13 hooks. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 8 mm pre-bending: total power requirement: 7,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3600x1250x1350 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specification: Automatic plate

A 14-head Ishida scale with a display replaced a few years ago is available. Throughput: approx. 80weighings/min, portion range: 10g-500g, deviation: +/-1g, machine dimensions X/Y/Z: approx. 1600mm/1500mm/1900mm, weight: approx. 700kg. An on-site inspection is possible.

An Ishida 14-head multihead weigher is available. Hopper volume: 3l, weighing range: 25g-1000g, max. volume for weighing: 4.5l/single dump, resolution: 0.2g, max. throughput: 90weighments/min, machine diameter: approx. 1360mm, height: approx. 1850mm, weight: approx. 500kg. An on-site inspection is possible.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Book Press with Joint Forming Format: 400x520x100mm, Book Height: upto 520mm, Book Width: 120-445mm, Book thickness: 8-100mm, Capacity: ca. 150 Pieces/hour

Mitsubishi MAF 210/150A Year: 1977 Table Size: 3000 × 3000 mm | Load Capacity: 60,000 kg Axis Travel: X: 14,000 mm | Y: 4500 mm | Z: 900 mm Spindle: Ø164 mm | 4–3460 rpm | 37/45 kW DC motor Control: ISO/EIA compatible | 5-axis interpolation | M-NUX115 DRO Accuracy: ±0.015 mm/m (X/Y), Repeatability ±0.01 mm Included Accessories: • Tool locking (5 pull studs) • Digital readout system • NC controller with startup components • Setup/leveling blocks • Maintenance toolkit • Protective covers Optional Add-ons (upon request): • Chip conveyor and coolant system • Rotary/angled fixturing • Pendant control • Bellows or floor plate systems • Special tooling packages Utilities & Installation: • Power: AC 220V (standard) • Air: 2–7 kg/cm² at 100 L/min • Installation space & foundation info on request

Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic

Electric forklift JUNGHEINRICH type EFG 216Serial No. FN413671 year of construction 2011Load capacity 1600 kgLifting height 4800 mmFork length 1220 mmFork carriage width 980 mmOverall height 2120 mmOperating voltage 48 volt- Triplex mast with full free lift 1550 mm- Hydraulic sideshifter- 2 travel speeds- Battery from year of construction 2015, Type 06 EPZS C750 SC (48 Volt, 750 Ah)- Automatic charger, 48 Volt- 3-wheel solid rubber - Front tires 18 x 7-8, rear 140/55-9- according to the operating hour meter 14725 operating hours read-

Clamping plate, machine table with T-slots made of steelClamping tableClamping plate, clamping table, machine table SELF-MADEcan also be used as a straightening plate or welded plateTable surface: 2150 x 1040 mmOverall height: 200 mm- Top and bottom machined in parallel, planed surfaces- Table top L x W x H = 2150 x 1040 x 65 mm- Table top with some symmetrical holes Table top with M16 and M24 threaded holes, M16, M24, M16, M24 etc. Bore spacing in length: approx. 250 mm Bore spacing in width: approx. 255 / 165 /