tba 21 used for sale

Ishida Multihead Weigher Model: CCW-RV-216-1D-30-WP Date: Dec 2015 Serial No: 560010412 16 head 3litre buckets Can come complete with 6 bucket distribution unit for thermoformer if required

Door opening button, push button, door opener -Manufacturer: eao, door opening button with mounting kit ovp -Type: 56-210102-00 847 -Voltage: max. 137 VDC -Quantity: 1x door opener available -Transport dimensions: 170/140/H40 mm -Weight: 0.1 kg

Specifications: - E.- Hydr. Lifting-lowering of the saw bracket - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° round approx. 210 mm - Flat approx. 240 x 190 mm - Square approx. 210 x 210 mm - Cutting range at 45° round approx. 150 mm - Flat approx. 150 x 100 mm - approx. 130 x 210 mm Square approx. 145 x 145 mm - Lifting speeds + cutting speeds adjustable - Stroke rates 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre adjustment Vise with opening width up to 260 mm - E.-Mot. Coolant Setup - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

Ishida Multihead Weigher Model: CCW-RV-216-1D-15-WP Date: Feb 2016 Serial No: 560010412 16 head 1.5litre buckets Can come complete with 6 bucket distribution unit for thermoformer if required

Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Panel, Control Panel -Manufacturer: Ilsemann, Control Panel -Type: 216 -Interface: V24/RS232 -Dimensions: 205/130/H60 mm -Weight: 0.9 kg

Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

pressure: 315 t stroke: 40-200 mm no. of strokes: 20-100 Hub/min ram - range of adjustment: 120 mm ram surface: 2000x1100 mm table surface area: 2000x1200 mm hole in the table: 1700x250 mm : 500 mm column travel -side: 820x650 mm total power requirement: 45 kW weight of the machine ca.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rubber damper, engine damper, clutch, rubber coupling -Rubber coupling: rubber damper engine damper -Dimensions: see photos -Total dimensions: 240/210/H130 mm -Weight: 4.5 kg

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Seco, shell end mills, indexable insert milling cutters SK50 -Type: R 215 16 50 049 058 09 Ø 49 mm -Dimensions: Ø 100 x 230 mm -Weight: 3.6 kg

bench vice, metalworker & vice, parallel vice -Jaw width: 135 mm -Wingspan: 215 mm -Number: 3x vices available -Price: per piece -Dimensions: 440/200/H490 mm -Weight: 26 kg

hydraulic filter, filter element -Manufacturer: Hydac, ventilation filter with filling strainer -Type: ELF 5-210-3.0 -Dimensions: Ø 176 x 355 mm -Weight: 2.7 kg

Motor roller, roller motor, drum motor, belt sander, belt sander -Drum motor: Drive drum -Type: unfortunately without a type designation -Speed: 1400 rpm -Drum: Ø 215 mm -Drum length: 295 mm -Shaft: Mountings Ø 32x95 mm / Ø 32 x 65 mm -Overall dimensions: Ø 215 x 455 mm -Weight: 57 kg

serrated knife, scraper knife, machine knife, knife -Scraper knife: blade insert 6 pieces -Type: 721 B 218 -Hole diameter: Ø 6.5 mm -Number: 6x blades available -Price/Delivery:complete -Dimensions: 345/65/1 mm -Weight: 0.2 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 215 mm -Piston rod: Ø 20 mm -Hole: Ø 17 mm -Dimensions: Ø 50 x 500 mm -Weight: 3.6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 30 mm / Distance: retracted 430 mm -Dimensions: Ø 70 x 495 mm -Weight: 8.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 35 mm / Distance: retracted 540 mm -Dimensions: Ø 110 x 635 mm -Weight: 20.8 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg

Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Bolt circle: Ø 133 mm -Dimensions total Ø 210 x 170 mm -Weight: 12.4 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

Lifting strut, lifting gear, lifting drive, lifting linkage -Lifting strut: hydraulic lifting rod -Type: unfortunately no type designation -Part No.: 831/65 U10-2.8 -Dimensions: see photos -Dimensions: 1070/210/H130 mm -Weight: 12.7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/100/H105 mm -Weight: 7.7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/70/H80 mm -Weight: 5,2 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 215/70/H105 mm -Weight: 5,1 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 56-59 mm -Type designation: not available -Dimensions total Ø 260 x 120 mm -Weight: 14.3 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: holder Ø 213 mm -Mounting: Hole shaft cone Ø 44-54 mm -Type designation: not available -Dimensions total Ø 230 x 85 mm -Weight: 10.3 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller -Load capacity: kg -Dimensions: 210/100/H65 mm -Weight: 5 kg -only 1 piece available

Clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table -Measuring table: precision measuring table -Clamping surface: 215 x 180 mm -Measuring stand: height up to 220 mm -Dimensions: 260 x 260 x H320 mm -Weight: 13.2 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Passage: Ø 34 mm -Hole: Short cone 6 cone Ø 103-106 mm -Thread: M40 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 195 mm -Weight: 23.7 kg

Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 39.99 mm -Mounting: SK40 -Shaft: R=19.995 / L=219.014 mm -Dimensions total: Ø 65 x 314 mm -Weight: 2.8 kg

Control cabinet, distribution cabinet, switch cabinet, baying cabinet, server cabinet, electrical cabinet -Control cabinet: Electrical cabinet, server cabinet, unused -Type: 1-winged -Door: lockable -Overall dimensions: WDH 800/850/2190 mm -Weight 211 kg

Filter hose for chip extraction, dust bag, filter, filter bag for chip extraction, dust extraction, extraction system, ventilation ducts and fittings, exhaust hose, extraction hose, flexible pipe, reinforced pipe -Flexible pipe: Exhaust hose with flange -Length: 2100 mm -Material: Galvanized steel -Quantity: 1x flexible pipe available -Dimensions: Ø 170 x 2100 mm -Weight: 10 kg

Display, display module, display panel, multifunction counter, controller, bidirectional counter, preset counter, digital counter -Manufacturer: IVO, Multifunction Digital Counter with 6-digit LED Display -Type: N 214.002AX01 -Item No.: 300949 -Dimensions: 130/110/H50 mm -Weight: 0.4 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T slots: 3 - rotatable and swiveling -Fits Deckel Mikron WMW and other milling machines -Weight: 95 kg

Very agile machine made in Japan. Even faster than Robodrill for in tooling.MECTRON 3-axis machining centre type MTV E 210 (year 2010) Agile high power machine for fine tooling Made in Japan. It is faster than Robodrill, more tools.X/Y/Z travels 250/250/250 mmpositioning precision 0,003mm repatible +/-0,002mmmax. feed 36m/min @ 1,0gtable size 400/300mm, spindle nose 100 - 350mm of tablemax load on table 80kg HSK E 25 spindle, max 30000 UminRigid Tapping 8000/min30x tool changermax tool D30x100SINUMERIK 840DSL controlmax. program memory 2MBabsolute position detection COMPCAD, Slope processing, Rigid tapping, Circular interpolation, Measuring function, Polar coordinates interpolation, Background editing, Macro, G10, USB, backslash compensation, canned cycleNC Options: Ethernet, 4th axis, cylindrical interpolation, tool life management, 2nd measurement function, position monitoring function ...

CNC lathe Type: Puma GT 2100 Producer: Doosan Year: 9/2021 Control: Fanuc Hours: 1270 Max. turning diameter: 390 mm Max. turning length: 562 mm Spindle speed: 4500 rpm Spindle bore: 65 mm Main motor: 18.5 kW Tailstock Tool probe Chip conveyor Machine in very good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Braking resistor, charging resistor, damping resistor, filter resistor -BW 215 -150 ohms Item No.: 8254354 -600 W -Number: 2 resistors available Price: per piece -Weight: 5 kg

Manufacturer: ALPA Model : RT 2100 Type of machine : surface grinding machine Year of manufacture : 1997 - Max workpiece width: 600 mm - Max workpiece length: 2100 mm - Magnetic table: 2000 x 400 mm Equipped with: - Wheel dresser - Electronic control unit Mod. MT 2000/R - Electrospindle for conical grinding - Electronic plate from Tecnomagnete - Coolant tank Find more here - .ucymachines/ Contact us at - sales@ucymachines

geared motor, electric motor -Speed: 28 rpm -Power: 0.75 kW -Design: B5 angle -Shaft diameter: Ø 40 mm -Brake: 24 V -Protection class: IP 65 -Weight: 55 kg

Cooling/freezing chamber Viessmann External dimensions: 2920 x 2020 x 2100 mm Internal dimensions: 2760 x 1860 x 1940 mm Plate thickness: 80 mm Door clearance: 800 mm Stainless steel floor Easy to assemble Stock status: 1 piece Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Form 1: Quantity: 4x Depth 750 mm Height 2100 mm -Form 2: Quantity: 2x Depth 600 mm Height 2100 mm -Price: complete -Scope of delivery: without crossbeams -Total weight: 60 kg

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 4 bar -Quantity: 6 available Price: per package -Weight: 0.6 kg

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 6 bar -Quantity: 2 available Price: per package -Weight: 0.6 kg

Refer to code 1071-1072-1073-1074-1075-1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

The scope of delivery includes: 01x Truss strut, new Manufacturer: Mecalux Material colour: sendzimir galvanised Overall length: approx. 1,218 mm Center-center hole: approx. 1,164 mm f. Frame profile width: 100 mm Ø drill hole: approx. 10 mm U-profile dimensions: 70 x 30 mm Material thickness: approx. 1.5 mm Weight: 1.78 kg | Pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology -Screw connection: G 1/2 -Display: up to 4 bar -Quantity: 2 available Price: per package -Weight: 0.8 kg

Unused, stock item, model standard, IP 65, A4- A6, IP 65, max. load capacity 210 kg, weight 81 kg, warranty

- Condition: Presentation Machine - Usable volume: 210 L - incl. Control - incl. Pump to empty out

Safety switch, TZ -Quantity: 4x Available -Price: per piece -Weight per package: 0.5 kg

Bosch starter motor -Voltage: 24 V 7.5 kW -Type: 0-21000-3391 -Teeth: 11 -Weight: 15 kg