129,233 used machines on RESALE, but how to find them? Machine Search
For sale: Air control valve 14 connections per block Order number: 3102.1 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.
Filter system for low-viscosity liquids Manufacturer: Mahle Type: AF11363-1321-21000-3864/G1 All information without guarantee
10 colors Age : 2005 Complete rail system Unwinder 1 meter roll diameter Splice detector Web breaking detectors Teknek cleaning system Corona Antistatic system 6 printheads with IST UV units : 10 Ink pumps : 3 Sensotec control register system Rotary diecut ( K1B Gap Master) AVT inspection system Rewinder : compatible between both presses, need to choose Cold Foil Unit ( Unwinder+Rewinder) : compatible between both presses Cold Foil pressure cilinder : 3 Cold foil small cilinder : 3 Screen Printhead Gen I : 2 available for both presses, need to choose Screen Printhead Gen II : 2 available for both presses, need to choose Screen Printhead Gen III : 2 available for both presses, need to choose Mounting Device : 2 available for both presses, need to choose More ink chamber : 2 available for both presses, need to choose Mounting Device More ink chamber Tool List on re ...
RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100
VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg
; Gross weight [kg]: 3500; Engine: N67TM7; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy, - Stage V version available: Deutz TCD7.8 - Genset 220 kVA St5 SuperSilent- DPX-21006 + €44.000, -; Water Tank Volume [l]: 500
; Gross weight [kg]: 2420; Engine: NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, -Deutz TCD4.1 - Genset 110 kVA St5 SuperSilent- DPX-21004 + €23.500, -; Water Tank Volume [l]: 360
round bar steel: 50 mm square edge steel: 40 x 40 mm L-beam: 140 x 13 mm Punch power: 900 kN hole punching press: throat: 510 mm hole punching press: max. length of stroke: 29 mm hole punching press: capacity (dia. x thick.): 31 x 20 mm notching: l + T material: 80 x 14 mm no. of strokes: 40 / 45 Hub/min total power requirement: 4 kW weight of the machine ca.: 3,7 t dimensions: 2,1 x 0,7 x 2,12 m Accessories: various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece weight: 4 kg workpiece length: 200 mm dia. on complete length: 200 mm Control: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hz dimensions: 4,1 x 4,2 x 2,5 m connected load: 12 kVA flange diameter: 250 mm weight: 4,5 t Balancing machine for rotors - Turbocharger fuselage groups - hydraulic measuring station - Compensation station - Pulsation measuring table - Chip extraction - Measuring instrument CAB 950T - feeding device - Schenck/Lauer Control on Dase of Windows The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 1400 mm Roller width: 1600 mm pressure: 40 t Pressure line: 250 N / mm Number of rollers: 2 Stück Upper roll: 320 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Swimming roll - dia: 355 mm Roller covering: Flexroll-Manchon Clouth speed: 30 m/min Weight: 10 to dimensions of the machine ca.: 3,0 x 4,0 x 2,5 m • Inlet side with bearing cap for small skeins, • At outlet with Sochor arm and hydr. center winder, with thermic oil heating, Make: TOOL-TEMP, Switzerland, Type TT-380. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 25 - 80 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500
-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500
; Gross weight [kg]: 1600; Engine: BF4M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 175
Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amplification -fold: ? diameter: 380 mm workpiece height max.: 200 mm voltage: 230 V weight of the machine ca.: 245 kg dimensions of the machine ca.: 0,80 x 1,20 x 2,00 m - Serial-No.: 1740 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Langguth E 78-210-FVT-18 Labeller System for labelling lids Very good condition, directly from production!
; Gross weight [kg]: 1250; Engine: F3M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 125
; Gross weight [kg]: 1550; Engine: Deutz F4M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach, Straßenzulassung, - Super Silent Canopy, - Stage V version available: DPX-21001 + €5.500; Water Tank Volume [l]: 175
FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration
Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...
; Gross weight [kg]: 13000; Engine: DC13 072A/02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 2500
; Gross weight [kg]: 13000; Engine: DC13 072A/02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 2500
; Gross weight [kg]: 5000; Engine: DC09 72A/02-11; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 1200
Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm
saw-blade dia.: 210 mm Cutting height: 70 x 305 mm Cutting height at 45°: 35 x 305 mm saw blade turning speeds: 4500 U/min Motor output: 1,5 kW machine weight ab.: 9 kg Dimensions (L/W/H): 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 170 mm dimensions of saw-band: 2080 x 20 x 0,9 mm table height: 880 mm cutting speed: 40 + 80 m/min : 170 mm : 125 mm : 150 x 190 mm : 95 x 120 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 870 x 1.550 x 1.740 mm mm Miter band saw Demonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 5500; Engine: DC09 072A/02-13; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, , - Stage V version available: DPX--21008, + €34.500; Water Tank Volume [l]: 1200
Technical details Input voltage: 220 V Input frequency: 125 Hz Input current: 8 A Noise level: 65 dB Protection type (IP code): IP67 Power take-off speed (max.): 1,500 rpm (The electric motor has been used for retrofitting diesel-powered trucks to electric or hydrogen-powered ones. A hydraulic pump can also be added to it. A drawing of the electric motor with an attached pump is provided.) The Permanent Magnet Synchronous Motor (PMSM) is an AC electric motor that uses permanent magnets in the rotor instead of electromagnetic windings, resulting in high efficiency, power density, and a high torque-to-inertia ratio. These motors require complex, digitally controlled inverters for operation and are used in high-performance applications such as robotics, electric vehicles, and high-efficiency appliances like washing machines. Rotor: Unlike induction motors, the rotor is equ ...
Dimensions (L/W/H): 7000x2900x2100 mm Weight: 4500 kg Total power requirement: 35 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Floor oven Heuft BTO 21623 Thermal oil - Heuft shared oven - Model BTO 21623 - with 5 floors - of which 2 pull-out stoves - Floor width 120cm - Floor depth: 160cm - with exhaust hood including fan - Total baking area approx. 10sqm
Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white ...
Dimensions (L/W/H): 6800x2900x2100 mm Weight: 4500 kg Total power requirement: 36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center height: 300 mm Turning diameter: 600 mm Distance between centers: 2100 mm Eccentricity: max 140 mm Self centering chuck diameter: 200 mm Work piece weight: max 250 kg Grinding diameter: 224 mm Work piece turning speed: 18/40/63/90 rpm Grinding wheel dimeter: 915 mm Grinding wheel thickness: 32-63 mm Grinding motor: 7,5 hp Size: 5000 x 2100 x 1700 mm Weight: 4900 kg Includes 3 wheel hubs and 4 used grinding wheels
; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060
Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in the field of hematology to optimize reagent logistics in laboratories. The instrument is manufactured by RR Mechatronics and is often used in combination with Sysmex hematology analyzers. Purpose and function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a stand-alone device whose components are all housed in a closed housing. The housing features removable, epoxy-coated sheet metal covers. All external connections as well as the ON/OFF switch are located on the back of the device. All components that can be serviced and replaced by the user are accessible through the front door. The ...
Make: oli Spezialanlagen Type: 210V/U Year of Make: 2021 Serial No.: 0020544 Height: 3.14 m Length: 8.77 m Width: 4.49 m Weight: approx. 3000 kg Infeed height: 950 mm +/- 50 mm Spout height: 950 mm +/- 50 mm Magazine capacity: approx. 1800 mm Control and accumulation distance on the infeed conveyor: 1.30 m Format-dependent output: max. 120 bottles/min. Case erector/sealer: Fabr.: oli Spezialanlagen Type: AV-T/U Year of Make: 2021 Core Ø: 76 mm Roller Ø: max. 450 mm Roll width: max. 50 mm The end-of-line packaging line consists of the following main assemblies: • Turning station • Shunting oli 210 V/U • Setting packaging machine olimat AV-T/U • Capper module Technical equipment • Control panel 12" • 3 colors signal traffic light • Jam protection • Driven side conveyor belts • Servo-motor transverse thrust • Servo-motor extension u ...
VEAGOO MACHINE VT-210X packaging machine was manufactured in 2020 in China. Characterised by its simple operation and reliability, the machine is designed for packing products i.e. disposable gloves or masks in bags made of various types of plastic. Highly efficient operation is achieved thanks to the used components and technology, saving time and materials. The VT-210X packaging line automatically determines the cutting length of the bags, then packs them with products with a maximum height of 85 mm, and at the end seals the pack very carefully. Depending on the size of the product being packed, the packaging machine is capable of producing up to a maximum of 150 bags per minute. The packaging machine is equipped with, among others, a PANASONIC PLC control and a YATAI temperature controller. The total weight of the machine is 650 kg. Technical specifications of the VEAGOO MACHINE ...
4 Used DESMI NSL125-215C/D02 Pumps with Danfoss EM-PMI Motors (2023) We are offering four (4) high‑performance used DESMI centrifugal pumps, model NSL125‑215C/D02, each fitted with a powerful Danfoss EM‑PMI electric motor. All units were manufactured in 2023, have seen limited operational hours, and are in excellent mechanical condition—ideal for marine, industrial, and high‑flow applications. Pump Specifications (DESMI NSL125-215C/D02) Flow rate: 250 m³/h Head: 49.63 mLC RPM: 2967 Impeller Ø: 219 mm Power: 55 kW Pump No.: 524965-01-03 Production year: 2023 Certified with CE and UKCA markings Motor Specifications (Danfoss EM-PMI300-T310 Series) Voltage: 500 V Power: 55 kW Speed: Up to 4000 rpm Torque: 177 Nm Cooling: IC 71 W IP Rating: IP65 Mounting: IM3001 Weight: 125 kg Manufactured: 2023 High‑efficiency permanent magnet motor technology Con ...
; Gross weight [kg]: 1430; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super silent enclosure, - Socket 32A, - Coolant heater and battery charger; Water Tank Volume [l]: 500
Robot Fanuc R-2000iB/210F (E-25677) Year of construction: 2006 Max Arm Range: 2655mm Control: Fanuc R-J3IC Payload: 210kg
; Gross weight [kg]: 2000; Engine: NEF45SM1A; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy, - Including: battery charger and coolant heater, - input socket: 230V , - Output sockets: 2x 230V 16A, 2x 400V 32A, 1x 400V 63A, 5x powerlock; Water Tank Volume [l]: 215
The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg
Cutting length: 4300 mm Cutting height: 2150 mm automatic: , ELCON precision panel saw type D 215 ----------------------------------------------------- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----------------------------------------------------- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length ...
maximum number of results exceeded
please refine your search
