tba 21 used for sale

Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year 03/2002 - Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering and tarpaulin cover -Platform: 3990/2180/H690 mm -Load capacity: 6.5 t -Tires: Continental Super Elastic 6.00-9 solid rubber -Overall dimensions: 5700/2180/H1000 mm -Weight: 820 kg

The machine is in good technical condition; it can be tested by prior arrangement.

attention: the machine can be transported on a standard truck! Additional technical specifications: • Laser source: ROFIN-SINAR, type: 2000 SM • incl. extraction system

10x Unused gaskets / Dichtring for GEA Westfalia separators (MSA 170 / MSB 200 / CNB 215 / CND 215)., - Gasket / Dichtring: 0007-3002-540 Pos. 045000, year 2021, PA6G 38072., - Gasket / Dichtring: 0007-2466-840 H3., - Gasket / Dichtring: 0007-2803-840-DD., - Gasket / Dichtring: 0007-2803-840-E8, year 2015., - Gasket / Dichtring: 0007-2800-540 LN Pos. 048000, year 2022., - 4x Gasket / Dichtring: 0007-2803-840-W 1., - Gasket / Dichtring: 0007-2803-840-W 3., Type of Machine: Spare parts separator, Weight: 10 kg, Dimensions: 110 x 105 x 10 cm

Marking system Manufacturer: Röltgen Type 218 00000 Year of construction 2006

Key data: 2100 kN

Sumitomo Demag Systec 210/580-430 with the Sepro Success 22 robot / hybrid machine Year of Make: 2014 Injection unit: Screw diameter: 35 mm Injection weight: 153 g Spray pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Handlebar spacing: 580x580 mm Size of the clamping plates: 860x860 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic mode Euromap 67 Robot interface Air Valve x 9 Hydraulic, needle-core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air Core Pull x 5 Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection un ...

Operating terminal for Fette tablet press Manufacturer Greases Ident No. 2138599 Series No. 4502990047/009

Separator Alfa Laval BRPX 213 - 34 T Used motor 18.5 kW

Key data: 3240 mm, 2 mm

used Fasti Motor Folding Machine, For sale on behalf of customers. Please discuss the final price and exact equipment with Mr. Jevsek 0163-7269528 Working length 3240 mm Blechdicke Stahl/sheet thickness steel 2,0 mm Blechdicke Alu/sheet thickness Aluminium 4.0 mm Blechdicke VA/sheet thickness Stainless 1.5 mm Backgauge (max.)/Backgage manual max. 600 mm Farbe/Colour grün Total power requirement/electric power 16 A Raumbedarf/Space requirement 4650 x 1200 x 1500 mm Maschinengewicht/Weight 3950 kg Engine power 2.2 kW upper beam stroke 350 mm Roller shear/roller shear without Bending angle (max)/bending angle 145 degrees Machine number 92215013

Key data: 2400 kN, 916 g/PS, 70 mm

1.0 PCS Injection moulding machine with robot Manufacturer: NETSTAL Type: SYNERGY2400-150 Year of Make: 2008 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter: 70 mm Moulded part weight: 916 g/hp Equipment: Core slides 3 x DS / 2 x AS Robot SEPRO

General SKULY011 MakeAlfa Laval TypeFoodec 219 No.5132324-2022 Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Liquid outletcheck Solids outletcheck Motor15kW, 400/690V, 2945 rpm and 7,5kW, 400/690V, 2920rpm With variable speed drivewith frequency controller Max. rotor speed4400 rpm MaterialStainless steel General Year of construction2022 Mounted on framecheck With switchgear(as is) CEcheck Extra information This Maxine has logged a maximum of 1000 hours runningtime. Material of product-contact parts: Stainless steel (sanitary grade) Max. solid-phase density: 3.0 kg/dm³ Min/max. product temperature: 0 °C/90 °C Model: Horizontal sanitary decanter centrifuge Estimated G-force: approx. 3000 G Drum diameter: approx. 280 mm Drum length: approx. 1260 mm StarchBiotechnologyAgrochemicalsPlastic & polym ...

- Super Silent 55 dBA @ 7 metres; Gross weight [kg]: 2000; Engine: Iveco NEF45SM1A; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy, - Including: battery charger and coolant heater, - input socket: 230V , - Output sockets: 2x 230V 16A, 2x 400V 32A, 1x 400V 63A, 5x powerlock; Water Tank Volume [l]: 500

cutting diameter: 220 mm saw band length: 2455 x 27 x 0,9 mm cutting width: 230 mm cutting speed: 35-74 m/min m/min total power requirement: 1,2 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 1,6 x 0,9 x 1,8 m The GBS 218 Eco AutoCut is a precision miter band saw designed for use in workshops and light industrial settings. It is ideally suited for cutting steel, stainless steel, and aluminum profiles, combining a powerful range of features with user-friendly operation. Thanks to the integrated AutoCut system, the machine offers three selectable operating modes: automatic saw frame lowering with adjustable feed rate, rapid approach to the workpiece, and manual operation with a braking cylinder function. This versatility makes it ideal for a wide variety of sawing requirements. Key features: - Miter cuts up to 60° to the left - Two-stage selectable cutting speed: 35 +  ...

The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with a built-in 15-ton hydraulic power unit. Operating mode: semi-automatic. Power supply: 400 V, three-phase, 50 Hz. Motor power: 4 kW. Controls: digital pressure regulation; downward, upward, and rapid traverse movements. Weight (per nameplate): 700 kg. According to the section of the manual covering intended use, this configuration is designed for compressing filters with a diameter of 210 mm and a height of 1,090 mm.

- Available now Rheon V4 Stress Free Weigher/Dough Divider Type VX 212 Power approx. 800kg Dough belt width 130-150mm Product weight approx. 150 -1,200g with single and double-row guillotine with spreading station with single and double-row weighing and outfeed belts with star cutter lubrication with additional guillotine lubrication with 2 flours with digital control with funnel for approx. 50kg dough - Technically tested, cleaned and overhauled

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws, stepped top jaws, top jaws -Manufacturer: Schunk, hard stepped jaws, 1 set = 3 pieces -Type: SZKA 213 Jaw width 30 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 70/90/H50 mm -Weight: 1.4 kg

Gantry-type, 3-axis CNC machining centre Working area (type 2132): approx. 3300 x 2100 mm Vacuum table with multiple switchable zones Input: AES lifting table for automatic sheet loading Output: conveyor belt with label printer (labels are printed and applied manually) Main spindle: HSD ES929, HSK-F63 mount, 7.5 kW (9 kW), speed up to 24,000 rpm, 800 Hz, 380 V Main spindle overhauled in 2023 Drilling unit with 16 spindles: 6 vertical spindles in X, 4 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Tool changer with 12 positions Vacuum: Becker vacuum pumps, system approx. 500 m³/h Control: OSAI control system with AES ProcessController, operation via console with touchscreen and keyboard Operating hours: approx. 2,100 h (machine life), main spindle overhauled at approx. 1,360 h

B&A REF:   9355 TON: 65 SCREW DIAMETER:  32MM SHOT WEIGHT: 113 STROKE VOLUME:  124CM3 INJECTION PRESSURE:  1700AR PLATEN SIZES:  610 X 540MM DBTB: 380 X 330MM MAX MOULD HEIGHT: 250MM MOULD OPENING STROKE:  425MM MAX DAYLIGHT:  625MM EJECTOR STROKE:  100MM CONTROLS: ORION AIR VALVES: 1 MOTOR: 17 HEATING CAPACITY: 6KW SCREW DRIVE:   HYDRAULIC

Continuous furnace SSZN, type: CPMP 210-25 / 1V / R / G - 3 burner zones - Band width: 210 cm - Belt length: 25,000 mm - Heating type: Gas - Heating capacity: 350 kW Visits and test runs are possible by arrangement.

Key data: 600 t, 550 mm

RÖCHER hydraulic press from the site.

6x stainless steel flour silos with a capacity of 35 tons of flour each - 6 aluminium silos for 35 tonnes of flour each - Total capacity: 210 t - Incl. scale and dosing unit - control BECKHOFF - Condition: Good, ready to use - Transport costs and assembly on request

: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm : 11 mm : 11 mm : 7 mm : 8 mm : 6.4 mm : 225 mm : 215 mm : 165 mm : 8 m/min : 3950 mm : 1200 mm : 1200 mm : 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the to ...

axis stroke (X,Y,Z): 2100,3000,300 mm Number of tools: 12 St. Dimensions (L/W/H): 4160x3040x2810 mm Weight: 2500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 2100,4000,300 mm Number of tools: 12 St. Dimensions (L/W/H): 5160x3040x2810 mm Weight: 2900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 2100,5000,300 mm Number of tools: 12 St. Dimensions (L/W/H): 6000x2900x2810 mm Weight: 4500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 2100,6000,300 mm Number of tools: 12 St. Dimensions (L/W/H): 7000x2900x2810 mm Weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes -Screw stand: Fixator for machine tools and systems, 1 piece -Minimum height: 215 mm -Max. height: 295 mm -Dimensions: Ø 100 x 215 mm -Weight: 12 kg

AIRCOOLED CHILLER TRANE CGAM 80 SE SQ 217 KW Cooling capacity: 217.0 kW / 61.7 tons (12/7 — 35°C) Year of manufacture: 2017 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 3 pcs. Trane CSHN250K0BKM (scroll) + 1 pcs. Trane CSHN250K0AK0 (scroll) Type of refrigerant: R410A Number of fans: 6 pcs. Hydraulic module: 2 pcs. water pump Wilo DPL65/175(142), expansion vessel, buffer tank 500 l. Dimensions: 4.4x2.3x2.45 m Weight: 2500 kg Working hours: 30882/30124/30723/30428 h. Condition: Good

Aircooled chiller RHOSS WINPACK SE TCAESY 2110 102.5 KW Cooling capacity: 102.5 kW / 29.15 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer GSD80295VAB4-1 (scroll) + 1 pcs. Bitzer GSD80182VAB4-1 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump LOWARA, expansion vessel, buffer tank. Dimensions: 2.65x1.35x2.45 m. Weight: 1110 kg. Working hours: 10659/10659 h. Condition: Good

For Sale: CENTAURO R800 Band Saw + RVP-210 Feed Unit – Brand New The machine is brand new and available for immediate delivery from our warehouse in Italy. Before purchase, we confirm the current availability and exact configuration of the machine. The main advantage of this machine is its large cutting capacity, allowing the processing of workpieces up to 400 mm in height and 780 mm in width. The Ø800 mm band wheels, 11 kW motor, and worktable with a tilting angle of up to 15° provide a wide range of applications in professional woodworking. The CENTAURO RVP-210 feed unit is also included in the machine price. Technical Specifications: • Manufacturer: CENTAURO • Model: R800 • Feed unit: RVP-210 • Band wheel diameter: Ø800 mm • Maximum cutting height: 400 mm • Maximum cutting width: 780 mm • Maximum saw blade width: 80 × 0.8 mm • Saw blade length: ...

Code: 0509 Brand: SOCOMEC Model: LNE 210 - CE Standard Belt sanding machine for wood, furniture, steel, aluminium, metals, plastics, etc. – CE Standard Work surface dimensions 2100 x 700 mm Manual table lifting by handwheel Belt width 150 mm Belt length 5950 x 150 mm Pulley diameter 200 mm Three-phase motor 4 Hp Suction inlet diameter 120 mm Overall dimensions mm 3100 x 1300 x 1700 h Weight kg 340

sheet width: 2050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm down holder: 10 Stück no. of strokes: 14 - 24 Hub/min cutting angle: 0.5 - 2.0 ° throat: 150 mm table height: 850 mm oil volume: 200 ltr. weight of the machine ca.: 6.500 kg range L-W-H: 2500 x 2250 x 1950 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam (guided-blade) design - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-le ...

Macs double infeed conveyor with infeed height of 1000mm, belt width of 310mm and dividers of 60mm high., Macs double cross feeder of 2000mm long and belt width of 200 mm., Macs stainless steel platform with stairs and washing wall., Macs distribution system with swingchute,including tool trolley., Complete installation is never used, new out of the box!, Capacity: up to 200 WPM (double outlet), Heads: 16 pcs., Buckets: 3 litres, Weighing capacity per head: 400g / 800g, Accuracy: 0.5-1g / 1-2g, Volume per single dump: max 4.5 litres, Compressed air: 8 - 10 Bar, Dimensions: 5000 x 7500 x 4500 mm, Power: 3 x 400V, 50Hz, 16A, Weight: Total +/- 5000 kg

Ref. -No.: 10287 Manufacturer: DMG Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform ...

Ref. -No.: 10615 Manufacturer: DMG Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

travelling column machining center, year 2001. Used machine. More info & price on IndustrialBuyer.

Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3 -160 mm - Feed speed: 2,5 -13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear -free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for ve ...

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

sheet width:5040 mm plate thickness:2 mm total power requirement:12 kW weight of the machine ca.:9,4 t dimensions of the machine ca.:6200× 1300 ×1900 mm working width:5000 mm control:Fasti Matik stroke of upper beam:500 mm adjustment of lower beam:u.Biegewange 80 mm control cabinet:1000 x 850 x1450 mm Documents:vorhanden

pressure:3500 t stroke:900 mm Distance table / ram, stroke down:1000 mm distance table / ram, stroke up:1900 mm table surface area:3150 x 2150 mm ram surface:3150 x 2150 mm Total Weight of Tool max.:30,0 t Weight of Tool Top Part max.:20,0 t speed down:400 mm/s working speed:0,9 - 9,2 mm/s Hydraulic Operating Pressure:280 bar oil volume:5500 l rated current:760 A voltage:400 V frequency:50 Hz power requirement:425 kW weight:231,0 t

Used Alfa Laval MRPX 218 TGV-74C self-cleaning cream separator (skimmer), designed for the separation of warm milk into cream and skim milk. The separator is equipped with a self-cleaning / automatic solids discharge bowl, allowing accumulated solids to be discharged during operation. The original Alfa Laval design is suitable for continuous automatic operation and CIP cleaning., The separator has a nominal capacity of approximately 22.500 litres per hour for skimming warm milk and up to 30.000 litres per hour for milk clarification and standardisation., The machine is offered with the separator bowl, 30 kW electric motor and motor cover, together with inlet / outlet pipework with pump, pressure gauge and operating water valve., Please note that the horizontal main drive shaft is missing. The machine is therefore offered in its present condition and will require completion before it can  ...

Item number 90045-0337 Engine control card, engine control

Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Electrical: 400 V, 50 Hz, 3-phase Installed power:  ...

Used Tetra pak line Overhauled TBA 19 200 ml slim Technical Specifications & Performance DataThis used bottling line is a second hand Tetra Pak aseptic carton packaging solution configured for 200 ml Slim packs. It is engineered for industrial packaging and beverage production of milk and juice products, with reliable performance and efficient downstream handling.Configuration: Tetra Pak TBA/19 200B Slim filler + TSA21 straw applicator + TCP70 case packer + conveyor line + line controller and paper trolleyProduction speed: up to 7,500 packs/hourPack volume: 200 ml SlimFilling technology: AsepticContainer type: Carton (brick packs)Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70Operating hours: 26,600Indicative years: filler 2000, packer 2008, straw applicator 2000Advanced Automation & Control SystemsThe line is equipped with industrial automation architecture suitable fo ...

Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 9,000 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2008Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hour ...

Tetra Pak TBA 19 V10 complete filling lineTechnical Specifications & Performance DataThe Tetra Pak Tetra Brik Aseptic is a used bottling line filling machine for aseptic carton packaging. Built approximately in 1998, this industrial packaging machine is configured for 125 ml Slim Brik containers. Its vertical packaging-web handling arrangement supports the forming, filling and sealing stages required for compact carton packs in dairy product production.Manufacturer: Tetra PakMachine identification: Tetra Brik AsepticApproximate year of manufacture: 1998Machine Hours: 26.000 HoursContainer type: Brik cartonFormat: 125 ml SlimProduct application: Dairy productsFilling technology: Aseptic carton fillingAdvanced Automation & Control SystemsThe machine is equipped with an operator control panel and an electrical/control cabinet for managing operating functions. Visible pneumatic lines, mechan ...

Auction-ID: A3-46100-393088

CNC lathe HEYLIGENSTAEDT HEYNUMAT 21U x 2000 Robust horizontal CNC lathe, manufactured by Heyligenstaedt & Comp. GmbH in Giessen, Germany. A 2-axis machine equipped with a FANUC 0T series control , suitable for medium and large-scale turning operations. Technical data Manufacturer Heyligenstaedt & Comp. GmbH Córdoba Heynumat 21U x 2000 Year of manufacture 1981 Machine type Horizontal CNC lathe, 2 axes Nominal working length 2.000 mm Turnable/swing diameter Approx. 719mm Maximum spindle speed 2.240 rpm Spindle power Approx. 55,9 kW / 75 hp Bar capacity Approx. 76mm tool tower 12 positions CNC control FANUC 0T series Source Giessen, Germany Availability In stock The photographs show auxiliary equipment and tooling associated with the machine, including the KNOLL Filtron 300S-2 filtration system . Auction-ID: A1-51153-4