128,603 used machines on RESALE, but how to find them? Machine Search
round bar steel: - mm square edge steel: - mm L-beam: - mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2,212,35 m div. punches and dies Foot switch Spare blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
LINEA RIGENERAZIONE MONOVITE Diamtero vite 120/210 conico L/D 36 n.1 Degasaggio Silo alimentazione Cambia filtro a piastra Taglio ad anello liquido Vite di scorta
VIET CHALLENGE 211B 1100mm calibrating machine with 2 belts: – 1st calibrating roller belt – 2nd sanding roller belt – pneumatic on/off of the rollers, from the control panel – cleaning blowers on both belts – 2620x1130mm abrasive belt development – belts with single motor 11 kW / 15 HP – rubberized pressure rollers – automatic table positioner, with digital reader – Advancement mat in good condition – variable belt feed speed – front and rear support roller conveyors Machine according to CE regulations
Macchinario accessoriato di robot ARBURG MULTILIFT SELECT 15 Macchinario in produzione,visionabile in funzione,zona Tunisia
round bar steel: 42 mm square edge steel: 38 mm L-beam: 110 x 10 mm cutting capacity: 150 x 16 mm pressure: 60 t hole punching press: throat: 370 mm hole punching press: capacity (dia. x thick.): 25 x 16 / 20 x 19 mm : 720 x 420 mm total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Book Press with Joint Forming Format: 400x520x100mm, Book Height: upto 520mm, Book Width: 120-445mm, Book thickness: 8-100mm, Capacity: ca. 150 Pieces/hour
used
Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 10 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton
used
Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 14 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton
Mitsubishi MAF 210/150A Year: 1977 Table Size: 3000 × 3000 mm | Load Capacity: 60,000 kg Axis Travel: X: 14,000 mm | Y: 4500 mm | Z: 900 mm Spindle: Ø164 mm | 4–3460 rpm | 37/45 kW DC motor Control: ISO/EIA compatible | 5-axis interpolation | M-NUX115 DRO Accuracy: ±0.015 mm/m (X/Y), Repeatability ±0.01 mm Included Accessories: • Tool locking (5 pull studs) • Digital readout system • NC controller with startup components • Setup/leveling blocks • Maintenance toolkit • Protective covers Optional Add-ons (upon request): • Chip conveyor and coolant system • Rotary/angled fixturing • Pendant control • Bellows or floor plate systems • Special tooling packages Utilities & Installation: • Power: AC 220V (standard) • Air: 2–7 kg/cm² at 100 L/min • Installation space & foundation info on request
Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic
Electric forklift JUNGHEINRICH type EFG 216Serial No. FN413671 year of construction 2011Load capacity 1600 kgLifting height 4800 mmFork length 1220 mmFork carriage width 980 mmOverall height 2120 mmOperating voltage 48 volt- Triplex mast with full free lift 1550 mm- Hydraulic sideshifter- 2 travel speeds- Battery from year of construction 2015, Type 06 EPZS C750 SC (48 Volt, 750 Ah)- Automatic charger, 48 Volt- 3-wheel solid rubber - Front tires 18 x 7-8, rear 140/55-9- according to the operating hour meter 14725 operating hours read-
Clamping plate, machine table with T-slots made of steelClamping tableClamping plate, clamping table, machine table SELF-MADEcan also be used as a straightening plate or welded plateTable surface: 2150 x 1040 mmOverall height: 200 mm- Top and bottom machined in parallel, planed surfaces- Table top L x W x H = 2150 x 1040 x 65 mm- Table top with some symmetrical holes Table top with M16 and M24 threaded holes, M16, M24, M16, M24 etc. Bore spacing in length: approx. 250 mm Bore spacing in width: approx. 255 / 165 /
Electric walking forklifts, pedestrian stackers JUNGHEINRICH type EJC 214 series. No. 90334640 year of construction 2009Nominal load capacity 1400 kgNominal lifting height 3200 mmFork length 1150 mmTotal length 2000 mmTotal width 810 mmOverall height 2050 mmOperating voltage 24 volt- Duplex mast with 1600 mm free stroke- 4356 operating hours read- Battery from year of construction 2009, type 3PZS 375 (24Volt/ 375 Ah)- Automatic charger Jungheinrich 24 Volt, 40 Ampere- TÜV test UVV until 11.2025Weight 1200 kggood condition; used
Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308
For applying a security label to a top-load folding box. Output max. 300 folding boxes/min. Folding box dimensions width in infeed direction max. 120 mm, height max. 95 mm Separating station Side conveyor belts Top conveyor Label dispenser PAGOmat 6/2 A 75/100, height- and cross-adjustable Label roll outer diam. max. 400 mm, core diam. 76 mm Label width max. 40 mm, label length max. 25 mm Inkjet printer Wolke (Videojet) m600 advanced with 1 print head Camera control PCE with camera Mini-Smart, retrofitted in 2010 Badpackage ejection into container with air nozzle and ejection countercheck Various controls with light barriers Machine control with separate control cabinet, PLC Siemens S7-300, HMI Siemens Simatic Panel Camera control with separate shadow cabinet, PLC S7-200 and IPC (Windows XP Professional), keyboard, HMI PCE panel ...
Operating terminal for Fette tablet press Manufacturer Greases Ident No. 2138599 Series No. 4502990047/009
Control Siemens SINUMERIK 828D Rotary diameter. [mm] 378 Turning length [mm] 489 Workspace max. turning diameter 378mm max. machining length 489mm X-axis 205mm Z-axis 590mm Y-axis 110mm B-axis 590mm Main spindle Chuck diameter 210mm max. rod diameter 68mm Spindle bore diameter 76mm Drive power 11/18.5 kW max. torque 209.5 Nm max. speed 4,500 rpm Sub-spindle Chuck diameter 135mm max. rod diameter 36mm Spindle bore diameter 43mm Drive power 7.5/11 kW Max. torque 40.4 Nm max. speed 6,000 rpm Tool turret Number of tool stations 12 Tool holder BMT45 Powered Tools Yes max. speed 6,000 rpm
Key data: 850 kN, 40 mm
R1295Injection moulding machine ARBURG 320-850-210 Multronica Screw D=40mm Locking force 85 t.Converted from floppy disk drive to CL drive Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)
Farmer EL2100 Welder 230 and 400V With cooling fan and driving equipment
Height=1.55 m, Overall length= 0.75 m, Overall width= 0.8 m, Net weight= 160 kg,
Height=0.84 m, Overall length= 0.65 m, Overall width= 0.78 m, Net weight= 140 kg,
Height=1.62 m, Overall length= 0.8 m, Overall width= 0.6 m, Net weight= 220 kg,
Height=1.3 m, Overall length= 0.9 m, Overall width= 3.35 m, Net weight= 415 kg,
cutting diameter: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 150 x 150 mm capacity 45 degrees: flat: 150 x 210 mm capacity 60 degrees: round: 90,0 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: flat: 90 x 100 mm dimensions of saw-band: 2455 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: ca. 900 mm total power requirement: 1,2 kW weight: 240 kg range L-W-H: 870 x 1550 x 1740 mm Equipment: - compact / robust manual band saw (HOBBY / INDUSTRY) for sawing solid material and profiles - miter cuts up to 60° left possible - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manual quick-release vice, including quick-release lever - machine base - coolant system - operating i ...
cutting diameter: 180 mm capacity 90 degrees: square: 180 x 180 mm capacity 90 degrees: flat: 200 x 150 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 125 x 110 mm capacity 60 degrees: flat: 70 x 70 mm capacity 60 degrees: square: 70 x 70 mm capacity 60 degrees: round: 70 mm turning speed range:: 40 / 80 m/min saw band length: 2.130 x 20 x 0,9 mm total power requirement: 0,75 kW weight of the machine ca.: 190 kg Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow stepless feed adjustment limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructi ...
sheet width: 2100 mm plate thickness: 6,0 mm ST 42 thickness at Niro-steel: 4,0 mm VA cutting angle: 1,2 Grad no. of strokes: 28 Hub/min oil volume: 150 ltr. down holder: 11 Stück control: CYBELEC CybTouch engine output: 11,0 kW back stop - adjustable: 1.000 mm table height: 800 mm weight: 4.500 kg range L-W-H: 3.010 x 2.100 x 1.640 mm ------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws ...
Height=1.3 m, Overall length= 0.9 m, Overall width= 3.35 m, Net weight= 400 kg,
VISION WIDE SF-2116 CNC PORTAL MILLING MACHINE Year of construction 2016 Fanuc 31i ModelB Table : 2000 X 1500 mm X-axis travel 2000 mm Y-axis travel 1500 mm Z-axis travel 800 mm Engine power: 44 kW With tool changer Total weight : 20t approx. Horizontal Head 90 Degree
MCA automatic capping machine with false capping detector Running Direction: Right-Left Adelski Pv 6541/1/210 AVM2104 Capacity: 10,000 bottles/hour Format parts1l/0.75l Schlegel/Bordeaux Burgundy/0.25l/0.5l
- Covex and Concave grinding - 6 steady rest included - 2 steady rest hydrostatic - Coolant system with magnetic filter - Measuring system with 5 arms caliber: - Arm 1: Working area 1300 to 1600 mm - Arm 2: Working area 1000 to 1300 mm - Arm 3: Working area 700 to 1000 mm - Arm 4: Working area 400 to 700 mm
Kircheis 2100 x 3 mm Max worklength: 2100 mm Max tickness: 3 mm Length: 3250 mm Depth: 800 mm Hight : 2000 mm Weight: 2,5 ton
Key data: 3240 mm, 5 mm
Max. bending length: 3240 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Program control via touchscreen (back gauge, bending angle adjustment, stroke of the upper beam, sheet thickness, number of pieces, etc.) Motorized height adjustment of the bending beam (adjustment of the sheet thickness) Manual and automatic mode possible Controlled backgauge with spring fingers Central lubrication Various additional bending and reinforcing rails Operating instructions 5700 kg
Ultrasonic Banding Machine ATS US 2100 AB; tested and maintained by ATS Germany support; Belt width 75mm; Frame 430x205mm; 2-fold print mark control for printed material; fixed strap length adjustable; Arc air; suitable for paper or foil. Ultra sonic banding machine ATS US 2100 AB; checked by the support of ATS Germany; band width 75mm; frame 430x205mm; Double Print Mark Reader; fix band lenght possible; airing for the frame; used for paper or foil.
Key data: 20 kp, 160 , 187
Rated power at 50%ED: 20kVA Short-circuit current: 19kA Electrode force: 187daN / single stroke Projection: 160mm --- Welding control: TE 91 (12 times, 2 programs) --- Incl. additional options: -Foot switch -Main switch -Table --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Properties Volume 2160 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1300 mm Cylinder height 1800 mm Diameter width 1200 mm Inner diameter 2000 mm Surface marbled on the outside Manufacturer: Möschle Number of feet 4 Description Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 440 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 4 feet
Inv. Num. : 8729 Type: TC 215 Producer: Brother Generated: Parameters: Work table length: 500 mm Work table width: 220 mm Maximum table load (even): 75 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 300 mm Y-axis travel: 220 mm Travel Z-axis: 200 mm Number of all tools: 10 pieces Machine height: 1901 mm Machine length: 2430 mm Machine width: 1200 mm Machine weight: 1300 kg Equipment: Tool Holder
Membranpresse modell FISMA 210 (ITALIEN) Arbeitsgröße: mm 2100 x 1200 Öffnung mm 500 Arbeitshöhe mm 250 Öffnen und Schließen des Deckels mit vertikalen Pneumatikkolben Diese Presse eignet sich zum Furnieren von Formteilen wie Fensterflügelrahmen und gebogenen Teilen Oberheizung mit Heißluft Beheizung der Unterseite mit Heißluft Verbrauch approx. 9 kWt Arbeitszyklus: approx. 10 Min. Kompletter Kompressor zum Anheben der Abdeckung und unter der Abdeckung Verarbeitungsvorvakuum einstellbar bis 6,5 atm
Replacement column for IDRA 2500, D300mm x 7115mm, (2), 210779, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7115mm, trapezoidal thread TR 300 x 10, 3944 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Formwork panels 21mm, used 1,777 m² used formwork panels 21mm EUR 11,00 per m² ---------------------------------------------------------------------- --------- Plywood 21mm, used 1.777 m² used plywood 21mm EUR 11,00 per m²
Center height: 210mm, distance between centers: 1500mm, swing over bed: 420mm, spindle bore: 57mm, speed range: 38–2000/min, main drive: 7.5kW, weight: 2t. Equipment: 3-jaw chuck, tailstock, steady rest, quick-change tool holder, coolant system, lighting, year of manufacture: approx. 1980–1985. No data sheet, fully functional, well maintained, ready for immediate use. Only slight oil moisture in the lower area due to age, without relevant oil loss. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
