tba 19 200 used for sale

Mounting rails, sliding set, pipe clamps, pipe fastening, pipe clamp bracket -Manufacturer: Sikla, sliding set for Siconnect Pressix rail system -Type: GS CC-2G-PL 191711 -Quantity: 11x sliding set available -Price: per piece -Dimensions: 150/130/H50 mm -Weight: 0.7 kg/pc.

Mounting rails sliding set, pipe clamps, pipe fastening, pipe clamp holder -Manufacturer: Sikla, sliding set for Siconnect Pressix rail system -Type: GS -Quantity: 22x sliding kit available -Price per piece -Dimension: 275/190/H55 mm -Weight: 1.8 kg/pc.

clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 600 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 2,250 kg Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump, hydraulic unit, hydraulic container, hydraulic tank -Manufacturer: Safan, hydraulic container from press brake type UC 110-3100 -Level indicator: sight glass -Total dimensions: 1950/540/H485 mm -Weight: 69 kg

Moving steady rest, moving steady rest, steady rest, lynette -Bezel: traveling -Top height: approx. 192 mm -Plating: brass -Dimensions: see photos / technical drawing -Quantity: 2x bezel available -Price per piece -Dimensions: 220/60/H325 mm -Weight: 2.4 kg/pc.

three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size Ø 190 mm -Passage: Ø 54 mm -Bolt circle: Ø 174 mm / M10 -Dimensions: Ø 190 x 110 mm -Weight: 11.2 kg

load jack, swivel jack, lifting jack, shackle, load jack, lashing eye, lashing ring, attachment point, load jack thread -Load trestles: lashing point -Shaft mount: M42 -Hole spacing: 220/140 x Ø17 mm, see photos -Quantity: 1 piece -Dimensions: 280/190/H200 mm -Weight: 19.9 kg

Formwork nail, formwork nails, strip nails, nail strips, brad nails -Manufacturer: Collated Fasteners, Strip Nails 1 Carton/ 500 Pieces -Type: SNK 1985 5.0 x 160 mm smooth -Price/Fee: complete -Transport dimensions: 260/160/H150 mm Total weight: 12.1 kg

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 1990 mm -Width: 1570 mm -Height: 300 mm -Plate thickness: 45 mm -Plate: with support ribs -Transport dimensions: 1990/1570/H300 mm -Weight: 2175 kg

Stop for press brake, bending machine, guillotine shears ..., cross table -Stop: for press brake, bending machine, guillotine shears ... cross table -Hole: Ø 60 mm / bolt circle 75 mm M6 -Dimensions: see photos -Dimensions: 630/190/H185 mm -Weight: 8.8 kg

machine stairs, machine access, machine platform -Machine platform: solid design -Platform: length 1950 mm with cutout 530 x 410 mm -Height: 520 mm -Dimensions total: 1950/1310/H520 mm -Weight: 105 kg

Machine stairs, machine access, machine platform -Machine platform: solid construction -Platform: 2455 x 1925 mm with cutout dimensions, see photos -Height: 270 mm, additional height 300 mm -Transport dimensions: 2455/1925/H330 mm -Weight: 160 kg

Lifting pulley, pulley, rope pulley, steel rope pulley, rope pulley, rope pulley block, hydraulic lifting pulley -Mower lift: Lifting roller with hydraulic cylinder -Hydraulic cylinder: Bosch stroke 190 mm -Number: 2x mower lifts available -Price: per piece -Transport dimensions: 480/130/H67 mm -Total weight: 6.1 kg/piece

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley type SPB 190x5 -V-belt width: 17 mm -Receptacle: Cone Ø 100 - 107 mm for taper bushing TB 3020 -Quantity: 1x pulley available -Dimensions: Ø 198 x 105 mm -Weight: 9 kg.

four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm / M10 -Jaw width: 20 mm / interchangeable jaws not included -Dimensions: Ø 190 x 70 mm -Weight: 8.5 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 20 x 100 mm -Dimensions: 325/198/H222 mm -Weight: 22.1 kg

Bezel, moving bezel, steady rest, lynette -Bezel: moving -Tip height: see photos for dimensions -Dimensions: 220/195/H340 mm -Weight: 8 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Venjakab, belt conveyor on solid base frame, without drive -Webbing: Type H 6.5 m -Belt width: 1985 mm -Conveyor length: 3 m -Transport dimensions: 3060/2430/H940 mm -Weight: 740 kg

Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm -Interchangeable jaws: Width 20 mm not included, can be supplied at an additional cost -Dimensions: Ø 190 x 65 mm -Weight: 8 kg

Key data: 1550 KW, 1937 kVA

We currently offer: MTU generator set Engine MTU V12 4000 Generator Marelli Type: MJR 4582G220Z3 Power 1937 KVA / 1550 KW Hz 60 Volt 690 A 1623 1800 RPM Year of construction: 2011 Operating hours are low You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: without interchangeable jaws, chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm -Groove width: 20/12 mm -Interchangeable jaws: available in a wide selection, can be supplied for an additional charge -Dimensions: Ø 190 x 70 mm -Weight: 9.1 kg

Angle bracket, locksmith square, flat angle -Flat angle: Leg length 400 x 195 mm -Quantity: 1x flat angle available -Dimensions: 400/195/H10 mm -Weight: 2.2 kg

Angle bracket, locksmith square, flat angle, control angle -Flat angle: Leg length 190 x 120 mm -Quantity: 1x flat angle available -Dimensions: 190/120/H5 mm -Weight: 0.3 kg

Universelle Stanzmaschine - Punching machine Masfeld ZEL 1903 Serial-No. 1903 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

PLC control, digital output, digital output module, digital input, Base Unit -Manufacturer: Siemens, Simatic ET 200SP Base Unit -Type: 6ES7 193-6BP20-0DA0 -Number: 20 modules available -Price: per piece -Dimensions: 140/20/H35 mm -Weight: 0.1 kg/pc

Pappschere - Board Cutter Wilhelm Leo'S Nachfolger 19030 Serial-No. WLNS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: Diameter 45 mm -Transport width: 195 mm -Shaft: Ø 14 x 75 mm -Bearing mount: Ø 15 mm -Quantity: 1 roll available -Dimensions: Ø 45 x 280 mm -Weight: 2.5 kg/piece

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 3.5 kW -Output: 105/140V 291/391Hz -Power: 3.4 kVA -for edgebanders, edgebanding machines -Weight: 120 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 199 mm -Drum length: 384 mm -Speed: 2800 rpm -Power: 2.2 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 67 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 192 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30/60 mm -other sizes also available in stock -Number: several engines available -Weight: 70 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 196 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 78 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 194 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 74 kg

3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition

Compressed air breathing apparatus, respiratory protection -Handover: in its current condition as inspected -electric pump with emergency hand crank -Distributor: with pressure gauge -Hose -Box -Weight: 100 kg

Compressed air breathing apparatus, respiratory protection -electric pump with emergency hand crank -Distributor: with pressure gauge -Hose -Box -Handover: in its current condition as inspected -Weight: 100kg

alternator -Type: 0986 031 190 -28 V -Weight: 5 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 7.5 mm -Dimensions: 45 x 190 mm -Length: 2800 mm -Weight: 240 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 10 mm -Dimensions: 45 x 190 mm -Length: 3000 mm -Weight: 240 kg

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 195 mm -Interchangeable jaws -Weight: 12 kg

Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Plug -Type: 192 009 -Quantity: 40x Available Price: complete -Weight: 0.5 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Complete wheel: 2 tires with tube and rim -Tire size: 7.00-12c PR14/ 190-305 -Bolt circle: Ø 228 x 20 mm -Recess: Ø 160 mm -Price/Delivery: complete -Weight: 33 kg/piece

Standpipe valve 1 1/2 for wash basin -Basin depth: 200 mm -Water level: 170 mm -Number: 14x available -Price: per piece -Weight: 0.3 kg

Standpipe valve 1 1/2 for washbasins -Bowl depth: 150 mm -Water level: 120 mm -Quantity: 15x available -Price: per piece -Weight: 0.3 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size Ø 190 mm -Passage: Ø 60 mm -Bolt circle: Ø 170 mm -Interchangeable jaws: available in a wide selection, can be supplied for an additional charge -Dimensions: Ø 190 x 100 mm -Weight: 9.2 kg

; Power [PS]: 359; Gross weight [kg]: 3050; Engine: FPT CURSOR9TE8; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 408

; Gross weight [kg]: 4500; Engine: Iveco CR16TE1W.S550; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000

; Power [PS]: 598; Gross weight [kg]: 4700; Engine: Iveco CURSOR13TE6; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 775

; Power [PS]: 449; Gross weight [kg]: 3600; Engine: Iveco CURSOR9TE9; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 595