tba 19 200 used for sale

used oven W &P Matador MD 190, 5 floors, 1 pull-out stove, baking surface of one floor: 180 cm wide / 200 cm deep, overhauled, new insulation, with new plates, newly sealed, electrics partly renewed and tested, with touch control, if necessary with new oil or gas burner for an additional approx. 2,000€

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Side door -Dimensions: 1980/635/H40 mm -Weight: 26 kg

Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Passage: Ø 57 mm -Weight: 10 kg

Tool holder, milling holder, milling tool, cutter head -Manufacturer: Wohlhaupter, tool holder 195 015 TO13815 -Take: SK40 -Mandrel: 69871 ANSI 40-SMA 22/63 -Dimension: Ø 64 x 160 mm -Weight: 1.3 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with 1-axle turntable steering -Platform: 1980 x 785 mm -Load capacity: 4 t -Tires: solid rubber -Dimensions: 3650/790/H505mm -Weight: 383 kg

Electric motor, three-phase motor -Manufacturer: IAEA, electric motor type MA 19C120 -4A -Power: 0.75 kW -Speed: 1380 rpm -Shaft: Ø 19 x 40 mm -Construction: B14 -Protection class: IP44 -Dimensions: 285/167/H200 mm -Weight: 14.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 190 mm -Piston rod: Ø 30 mm -Admission: thread Ø27 x 45 mm -Cylinder: outside Ø 75 mm -Dimensions: 445/75 / H85 mm -Weight: 8.1 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: Stroke 190 mm -Piston rod: Ø 40 mm -Mounting holes: Ø35 x 20/40/20 mm / Thread Ø36 x 55 mm -Cylinder: outer Ø 118 mm -Dimensions: 530/140/H118 mm -Weight: 20 kg

Pipe sealing bag, leak-tight cushion, sealing plate, pipe seal -Rohrdichtkissen -Outside / inside Ø 195/155 mm -Height 53 mm -Delivery of steel / stainless steel cover plates possible -15 x pillows available -Price per piece -Weight 0,5 kg / piece

range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, webbing, flat belt, drive belt -Width: 50 mm -Length: 1995 mm -Price: per piece -Quantity: 6 pieces -Dimensions: 130/130/H50 mm -Weight: 0.4 kg/piece

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 193 mm -Inside: Ø 80 mm -Hole circle: Ø 105 mm -Dimension: Ø 193 x 75 mm -Weight: 4.1 kg

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing, penetration sealing -Pipe sealing cushions -Outer/Inner: Ø 233/194 mm -Height 53 mm -Delivery: steel / stainless steel cover plates possible -Number: 23 pillows available -Price: per piece -Weight: 0.6 kg/piece

Control of wind turbines, frequency converters, frequency converters, drive converters, controllers, variable speed drives -KEB: Combivert P6 pitch converter -Mat.No .: KEB 19P6H7G-YRXO -Power: 36 kVA -Input: AC 400/480 V 50/60 Hz/DC > 150 V -Dimensions: 1610/350/H645 mm -Weight: 146 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 2510/1910/H205 mm -Weight: 120 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 58 mm -Clamping depth: max. 190 mm -Number: 1x vises available -Price: per piece -Dimensions: 520/280/H155 mm -Weight: 55 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 190 mm -Through hole: Ø 57 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Rezess: Ø 155 mm -Hole circle: Ø 174 mm -Passage: Ø 54 mm -Weight: 11 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer diameter: 198 mm -Height: 20 mm -Hole circle: Ø 150/7 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 0.6 kg

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 198/110 mm -Height: 20 mm -Hole circle: Ø 150/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 148x pillows available -Price: per piece -Minimum warning: 3 pieces -Weight: 0.5 kg/piece

Clamping angle, clamping aid -Clamping angle for: workpiece clamping -Thickness: 35 mm -Bores: Ø 10/20 mm -Dimensions: 555/160/H250 mm -Weight: 55 kg

new rear light, incorrectly ordered, from stock

Knife disinfection machine, knife disinfection device -GENO: dishwasher 1988 -Metal case with: accessories see photo -Dimensions: 510/410/H210 mm -Weight: 19.5 kg

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 198/125 mm -Height: 58 mm -Weight: 2.8 kg

Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 198/135 mm -Height: 32 mm -Weight: 1.6 kg

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 198/122 mm -Base plate: Ø 242 mm -Height: 57 mm -Weight: 3.6 kg

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 197/135 mm -Height: 72 mm -Weight: 2.6 kg

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 300/198 mm -Height: 32 mm -Number: 2x pillows available -Price: per piece -Weight: 3.6 kg/piece

IRCO Profimat 65.6/196.6

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 300/198 mm -Height: 60 mm -Number: 6x pillows available -Price: per piece -Weight: 5.9 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 197/124 mm -Height: 20 mm -Hole circle: Ø 164/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 122x pillows available -Price: per piece -Weight: 0.5 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 198/135 mm -Height: 20 mm -Hole circle: Ø 164/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 49x pillows available -Price: per piece -Weight: 0.4 kg/piece

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 190 mm -Bolt circle: Ø 122/Ø 12 mm -Dimensions: Ø 190/H23 mm -Weight: 3.5 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 195/98 mm -Height: 20 mm -Hole circle: Ø 163/7 mm -Dimensions see: sketch in the photos -Delivery of: steel/stainless steel cover plates possible -Weight: 0.4 kg/piece

feed pressure: 250 bar liter capacity: 9 l weight of the machine ca.: 10 kg dimensions of the machine ca.: 1,15x0,4x0,4 m hydraulic gear pump - for more details see photos - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4-column punching tool, parting tool, punching tool, punch, punching die, punching punch -4 pillars: punching tool -Dimensions: 395/195/H240 mm -Weight: 54 kg

Version completely in stainless steel pressure shock resistant up to 1 bar Length 11,150 mm Diameter 3800 mm Filter area 434 m²

Three-jaw chuck, three-jaw lathe chuck -lining size: Ø 190 mm -Rezess: Ø 155 mm -Passage: Ø 54 mm -Weight: 11 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 100 mm -Piston rod: Ø 40 mm -Diameter eyes: 35 mm -Stroke: 195 mm -Dimensions: 530/130/H120 mm -Weight: 21.7 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Steering cylinder: stroke 198 mm -Piston rod: Ø 40 mm -Recording piston rod: Ø 24 x24 mm / Ø 28 x 22 mm -Dimensions: 715/110/H115 mm -Weight: 12.8 kg

Machine Type Electrode Inverter Welding Rectifier with PFC control STEL brand Type MAX 191 PFC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 115 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 420 x 160 x 280 mm Weight 9 kg Age 6 months Special accessories PFC control Condition workshop tested, new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 pair of welder gloves with cuff 1 piece slag hammer, heavy version 1 piece steel wire brush 2-row 20 pieces rod electrodes Böhler 2.5 x 350 mm 20 pieces rod ...

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Machine vice, sturdy vice, drill press vice -Jaw width: 160 x 40 mm -Clamping depth: 190 mm -Machine vice: rotatable -Dimensions: 500/380/H170 mm -Weight: 43 kg

Technical data for the pallet rack traverse: Shelving system: Dexion Type: P90 The scope of delivery includes: 01x pallet rack traverse, used Material color: yellow Truss type: SLB 110/1.5 S320 Box profile: 110 x 50 mm Agraffe: 5 HK (hook) clear width: 1,900 mm load per pair of trusses 2,000 kg, at the same time. distributed load 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 100 x 50 mm clear width: 1,900 mm Design: Head traverse

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material colour: silver grey Box profile: 100 x 45 mm clear width: 1,900 mm Design: Head traverse

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material colour: silver grey U-profile: 80 x 45 mm clear width: 1,900 mm Design: Head traverse