tba 19 200 used for sale

friction wheel, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling -Coupling star: for crane chassis -Art.No.: 1031 4149 -Type: Part 20 f. SDDL-5-200 -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 194 x 34 mm -Weight: 0.5 kg/piece

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller cage, cylindrical roller cage -Manufacturer: INA, Axial cylindrical roller bearings, axial needle roller bearings, 5 pcs., unused, original packaging -Type: AXK 150190 A -Outer diameter: 190 mm -Inner diameter: 150 mm -Dimensions: Ø 190 x 5 mm -Price per pack of 5 pieces: 200 euros -Stock: 4 package units and 2 individual items -Weight: 0.2 kg/piece

Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame -Clamping surface: 3990 x 1990 mm -Table height: 830 mm -Plate thickness: 15 mm steel plate on wooden planks -Flatness: see photos (straightening sheath not included) -Transport dimensions: 3990/1990/H830 mm -Weight: 1500 kg

Container, grit trap, storage container, transport storage container, storage tank, transport container -Container: Storage container -Capacity: 5047 liters -Inner dimensions: Ø 1890 x 1800 mm -Connections: see photos -Number: 2x containers available -Price: per piece -Dimensions total:Ø 1930 x 1815 mm -Weight: 211 kg/piece

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Kaeser, Air Oil Separator Filter Type 6 1963 0 -Inside/outside: Ø 124/170 mm -Bolt circle: Ø 210 mm -Number: 3x air filters available -Price: per piece -Dimensions: Ø 250 x 245 mm -Weight: 2.3 kg/piece

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helm, sliding gate sleeve, height-adjustable sliding gate sleeve -Type: 1998 Width 80 mm -Thread: M20 -Dimensions: see photos -Number: 7x sleeve available -Price: per piece -Dimensions: 90/115/H140 mm -Weight: 1.8 kg/piece

Shelf tray, spill tray, floor tray, pallet tray, collection container, spill pallet -Manufacturer: Denios, spill containment tray with steel cabinet construction -Drip tray: Type MC 1.10 -Collection volume: 1100 liters -Load capacity: 2000 kg -Dimensions (D/W/H): 1580/1340/1930 mm -Dimensions: D/W/H 1925/1590/2760 mm -Weight: 493 kg

Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Puller: Grinding wheel puller -Dimensions: see photos -Dimensions: 195/105/H90 mm -Weight: 2.9 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 50 mm see photos -Bolt circle: Ø 75 x 6 mm -Price/Delivery: complete -Dimensions: 328/190/H8 mm -Weight: 1.2 kg

Pressure control valve, pressure control directional valve -Manufacturer: Festo, pressure regulator valve -Type: LR-D-7-I-MINI 192299 -Operating pressure: 0-4 bar -Pressure: max. 16/7 bar, see photo nameplate -Number: 3x valves available -Price: per piece -Dimensions: 110/80/H95 mm -Weight: 0.5 kg/piece

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Exhaust fan: heat-resistant -Dust extraction fan: radial fan -Motor: 7.5 kW 1465 rpm -Connection: Inlet Ø 600 mm -Connection: Outlet Ø 400 mm -Volume flow: m³/h -Dimensions: 1985/1570/H1780 mm -Weight: 442 kg

Machine light, machine lamp, work area light, recessed light, LED recessed light, test light, panel light, ceiling recessed light -Manufacturer: Planistar, recessed light with LED 24V / 19W -Type: 35-Sled-3-BD-19w-O-disher -Connection: WAGO 5-pin connector -Number: 2 lights available -Price: per piece -Dimensions: 415/60/H30 mm -Weight: 0.6 kg/pc.

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: Machine foot for machine tools and systems -Support surface: 190 x 190 mm -Installation height: 23 mm -Quantity: 1 piece available -Dimensions: 190/190/H23 mm -Weight 4.5 kg

Manufacturer: Purete, Type: PRT-R1119 1950 mm, Year: 2020 NEU, Control: Schneider oder Siemens, Program: Touchscreen, Work piece width min-max mm: 1950, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2-80, Operating side: links oder rechts, Working height: 980, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 0-20, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 0-20, Gummierte Auftragswalze(n): EPDM/SOFT/PU, kW - Leistung Auftragswalze: 1,5, Double rubber coating: möglich, Dosierwalze verchromt: yes, Dosierwalzenschwindigkeit m/min min-max: 0-20, kW - Leistung Dosierwalze: 1,5, rbakel: yes, Hight adjustment by engine: yes, Type of transportation: Band, Pump system: Membrane, Carriage: möglich, Roller heating: möglich, Einbaulänge Auftragsmaschine mm: 1000, Year :2020 NEU

Work table AT 1900 with stainless steel plate Stainless steel worktop with gallery at the back Reinforced construction welded Used device cleaned

The SolidC UltraPure pump is an efficient and economical centrifugal pump that meets the requirements of pharmaceutical industries. It gently handles products and resists chemical agents., Pump: Centrifugal pump , Dn (mm): 34 , engine type: WEG, dn (mm): 34 , Engine power: 380V 50Hz 11kW , Link to manufacturer: .alfalaval.fr/

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slotted screws, T-slot nuts -Clamping tool: Clamping bolts with T-slot nut, 4 pieces -Bolt: Ø 24 mm -T-nut: 36/53 mm -Price/Fee: complete -Dimensions each: 190/54/53 mm -Weight: 1.5 kg

General SKU075H315 MakeHecht Technologie GmbH Pfaffenhofen Type7 192671 No.292964 Year of construction2008 Mounted on framecheck Main Features MaterialStainless steel Motor2.2 KW Inlet diameter150 mm Specified Features - Metering screw Metering screw:Container discharge station: (1x) Screw diameter150 mm Pitch100 mm With hopper/RVS container type 7_192671 Capacity± 650 l Hopper sizes1300 x 1300 x 300 mm, Conical bottom 900 mm: outlet diameter 250 mm Inletcontainer dia. 400mm Outletmetering screw dia. 150mm With motor2,2 KW, 230/400 Volt (Ex) Screw speed26 rpm With breaking/mixing shaft(twin shaft breaker above metering screw: inlet diameter 250 mm) With jacketcheck Metering screws MaterialStainless steel 1.4301 (304) General LocationBarneveld Floorspace2,5 x 1,7 m Total height3,0 m Weight2650 kg ATEX designedcheck Extra SpecificationsMetering screw mirro ...

General SKU259Y294 LocationBarneveld CEcheck MakeBüchi Main Features MaterialGlass Motor2.9 KW Specified Features - Spray dryer Spray dryermini Air heating (electric)check MaterialBorosilicate Glass 3.3 With jacketcheck General TypeB-191 No.400085027903001 With switchgearcheck Floorspace0,50 x 0,60 m Total height1,00 m Weight70 kg Extra SpecificationsMax drying output 1,5 kg water/hourSupplied with an extensive set of original Büchi spare parts, accessories, and service tools (see photos)Spray dryersBüchiDryers > Spray dryersBrand > Büchi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

TECHNICAL DATA: Weld seam width: 11 mm Heat welding Passage height: 590 mm Passage width: 640 mm 01 Bobbin holder

Heavy duty distribution pannels in very good shape,turbine control pannnels etc.

Manufacturer: BvL Model: Rotocleaner RC 1950 RW 2T Year of Manufacture: 2008 Type of Machine : Cleaning System Operating hours: approximately 18,505 hours Key Features - Dual-tank system: separate wash tank and rinse tank for superior cleaning results - Wash basket diagonal of 2319 mm, allowing cleaning of large and small components - Maximum usable length: 1545 mm - Maximum usable width: 1545 mm - Maximum usable height: 1000 mm - Load capacity: 750 daN (approximately 750 kg) - Operating voltage: 3 x 400 V, N+PE, 50 Hz Wash Tank Specifications - Tank capacity: 825 litres - Electric heating: 24 kW - Spray pressure: 4.5 bar - Wash pump: FHE 40-200/75 GLRD SiC/SiC-Viton, 7.5 kW - Level control: LIQUIFANT FTL 260 - Coarse filter: 2 mm - Detergent dosing: Membrandosierpumpe Alpha 1001 Rinse Tank Specifications - Tank capacity: 825 litres - Electric heating: 18 kW - Spray pressure: 3 ...

Transnorm accumulation roller conveyor 19000-600-550 RA2491 Make: Transnorm Roller width (RB): 550 mm Nominal/outer width (NB): 600 mm Length: 19000 mm Roller diameter: 50 mm Roller distance: 76 mm Drive motor: SEW Drive Eletrical Data: 380 V, 0,37 kW Accumulating space size: 700 mm Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: scope of delivery: without supports and side guides Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Nominal / outside width in mm: 600 Roll width in mm: 550 condition: gut Jam detection: Lichtschranke nominal voltage: 380-480 V Conveyor speed m / s: bitte Kontaktieren Roll division in mm: 76 Conveying length in mm:  ...

approx. 1,700 pieces, Euro stacking container in 1.19m x 610 x 420mm - used - : Price per piece from location: now only 5.-€ instead of 15.-€ (net)! Price for complete acceptance: now only 4.-€ instead of 12.50.-€ (net)! 1 truckload = 396 pieces! Manufacturer: unknown Year of manufacture: unknown External dimensions (LxWxH): 1,190 x 610 x 420mm Internal dimensions (LxWxH): 1,150 x 555 x 390mm Material: Polypropylene Weight per container: 10.8kg Colour: grey and few in yellow Approx. 396 crates fit per truck Condition: good Available: immediately Location: the main part is stored in Niedernberg (near Aschaffenburg)

Key data: 600 kN, 35 mm

SANDRETTO Serie 8 192/60 - 60 T Reference: 192/60 Screw Diameter: 35 mm Injection Volume: 131 cm³ Injection Pressure: 1450 bar L/D Ratio: 21 Distance Between tie bar: 325 x 325 mm Platen Dimensions: 500 x 500 mm Interface Robot Dimensions: 5.17 m x 1.17 m x 1.98 m Weight: 4100 kg

Machine tool manufactured in 2008. This BVL RC 1950 RW 2T features a useful length of 1545 mm, a maximum useful width of 1545 mm, and a maximum useful height of 1000 mm. It includes a 2-tank system for washing and rinsing, with a wash tank capacity of 825 liters and a rinse tank capacity of 825 liters. If you are looking to get high-quality washing capabilities, consider the BVL RC 1950 RW 2T machine we have for sale. Contact us for further details.

Grain sampler type 1938 DRP, 1 litre sampler, in a wooden case Newly calibrated in 2025, valid until 2029! Complete with tripod (lower part), hollow measure, filling tube, knife, flow weight, scale with tripod and weight tray Weight set (3x200g, 100g, 2x50g, 2x20g, 10g, 5g, 2x2g, 1g, 500mg). Good condition, checked and adjusted by a specialist laboratory. Scales and weights are calibrated only according to customer requirements Operating regulations and official boards are enclosed

Support stand, assembly stand, steel stand, welding table, assembly table, work stand, heavy-duty support stand, mobile stand, support stand, trestle stand, support stands -Auxiliary stand: Steel stand with spring-loaded chassis -Height: 1910 mm -Load capacity: 15 tons distributed load -Number: 2 axle stands available -Price: for 2 pieces -Dimensions: 1310/1915/H1910 mm/piece -Weight: 263 kg/piece

A hydraulic system, consisting of three identical power units and three identical hydraulic hammers including lines, is available. 1) 3x hydraulic power unit Atlas Copco LP 9-20 P, engine manufacturer: Honda, engine power: 6.7kW, fuel: gasoline, max. operating pressure: 150bar, return filter fineness: 25µm, machine dimensions X/Y/Z: approx. 650mm/550mm/650mm, weight: approx. 80kg. 2) 3x hydraulic, vibration-damped breakers Atlas Copco LH 190 E, year of manufacture: 2014, operating pressure range: 95bar-110bar, blow frequency: 1400/min, vibration value: approx. 5m/s², max. back pressure: 10bar, length: approx. 650mm, operating weight: 25kg. 3) Hydraulic hose lines. An on-site inspection is possible.

Maximum pressure 10 Bar ( Reader 10Bar press relief valve) Highest temperature allowed: 120 Celcius Lowest temperature 0 Celcius Internal volume 98 liters Heating Capacity: 63 KW

Grain sampler type 1938 DRP, 1/4 liter prober With wooden case, complete with tripod (lower part), hollow measure, filling tube, knife, flow weight, scale with tripod and weight tray With full set of weights (100g, 50g, 2x20g, 10g, 5g, 2x2g, 1g, 500mg; Very good condition: tested, calibrated and recalibrated 2026 (valid until 2030). The device was calibrated, not the scales and the weights. We recommend using a calibrated laboratory scale, which we can offer to match.

A low-tension fabric inspection and shearing machine Unglaub with newly covered transport rollers is available. Working width: 1900mm, material thickness range: 0.2mm-3mm, max. inspection material speed: 40m/min, inspection material groups: I-IV. Documentation available. An on-site inspection is possible.

900 mm wide Breyer sheet coextrusion line for PP/PS:, Refurbished in 2011., Complete automatic Material Feed System., 3 component Dosing Mixing Station, Main Extruder, diameter 120 mm L/D 32, 350 - 375 kg/ hr through-put., Coextruder diameter 90 mm L/D 32, 300 - 350 kg/ hr through-put., 6 x Zone Electrically heated fan cooled barrel., Both Extruders with Hydraulic Double Pot type screen changers with Hydraulic Power Pack., Both Extruders equipped with EXTREX Melt-Pumps, ABA Configuration Adapter, Breyer 900 mm wide Inclined flex lip sheet Die. Thickness Range 0.5 mm to 2 mm, 1200 mm wide Breyer 5-Roll Polished Chrome cooling stack, with 670 mm, 400 mm, 400 mm dia. Rolls, Driven by individual Indramat Servo Motors, 2 x Extra Rolls available but not installed on the Stack, Roller Conveyor, 2 x Rubber Roll nip Take-off., Pump group with heat exchangers for roll cooling., Breyer double stati ...

Engine Brand: STAMFORD, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1900 , Generator Hz: 50 , Generator Volts: 400/231 , Generator Amps: 2742.4 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/catalog/product/view/id/218851, , = More information =, , Empty weight: 2.500 kg, Type number: PI734E2 LOSSE GENERATOR 1900KVA

Manufacturer: LAIP Model: 198-HT Type: High Temperature Yarn Dyeing Machine Year of manufacture: 2008 Condition: Used, was working before dismantling TECHNICAL SPECIFICATIONS - Package diameter range: 1760 to 3000 mm - 2 sets of carriers, each set with 2 carriers - Spindles for 21 cm diameter packages - 64 bobbins per level - Total PES dyeing capacity: 1,300 kg - Control system: 777 Setex controller - Designed for synthetic yarns, primarily PES (polyester Find more here - / Contact us at -

Material Name: SPROCKET 19T c/w short shaft, bearing n bearing support Material Brand: Generic Model: 19T Material Type: Chain drive sprocket assembly (with shaft & bearing housing) Material Specification: Sprocket: Medium carbon steel (C45 / S45C) Shaft: Carbon steel (C45 / EN8) Bearing: Deep groove ball bearing (chrome steel) Bearing support: Cast iron / mild steel housing PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Offered is a conventional lathe. Center height: 190mm, swing diameter over bed: 380mm, speed range: 27-1000rpm, speed stages: 12, thread types: metric, Whitworth, module, feeds: Norton gearbox, spindle mount: bayonet, operation: manual, control system: manual. Equipped with 3-jaw chuck, chuck guard with safety screen, four-position tool holder, lead and feed screw cover. Weight: approx. 1200kg, overall dimensions X/Y/Z: approx. 2000mm/1000mm/1300mm. Inspection possible by arrangement.

Key data: 3000 mm, 55 mm

For sale Irco bar magazin Typ Profimat 55.5 /196.6/3. The barfeeder is complete with MPG and for maximum bar diameter from 55 mm. Maximum bar length is 3000 mm. The machine has 6 channels in reasonable good shap. Out of stock.

General SKU292T672 LocationBarneveld CEcheck Main Features Motor1.1 KW Length1900 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter360 mm Length1900 mm Shaft diameter170 mm Pitch255 mm Inletdia. 175 mm (2x) Outletdia. 140 mm Motor1,1 kW 219-241/380-420 Volt With coverscheck MaterialStainless steel With jacketcheck General MakeVan Tongeren kennemer Mach.No.Z43752 Year of construction2015 Floorspace3,2x0,55 m Total height0,6 mOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther ...

General SKU117W606 LocationBarneveld MakeZeppelin Metallwerke No.7187 Specified Features - Stainless Steel Reactor Material finishMirror polished inside With jacketcheck Pressure Working pressure40 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume19370 Ltr. Motor55 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity19.370 Ltr Vessel sizesdia. 2300x5240mm Dished bottomcheck Dished top sidecheck Manholedia. 450x350mm (oval) Top connectionsdia. 100mm + 2x dia. 80mm + 2x dia. 60mm Outlet(no bottom outlet) With jacket(1750 Ltr) Max. temperature120/160 Degr. C. (vessel/jacket) With paddle stirrermake Ekato Motor55,0 KW, 380 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General Year of construction1975 Mounted on legscheck Floorspace2,6x2,6 M Total height± 7,5 M (without legs) Weight19. ...

Ge gas turbine Casings , Gas generator rotor Power turbine rotor Turbine casing (upper & lower halves) Combustion liners (set) Fuel nozzles Bearings Accessory gearbox anything and everything in stock.

Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible.

Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg

Number of spindles hole row: 11; Number of spindles horizontal: 3; Cup belt drill head: yes, Blum; Drill pitch: 32mm; Power consumption: 2.2kW; Drilling unit: swivelling;

Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal volume flow: 1900 m³/h; Scout bag volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; For milling, planing and sawdust (not suitable for dust)180Â rotatable extraction unit enables extraction guidance from below or aboveStable metal fan wheel as standard with high-quality chassis for better stability and easy manoeuvringQuick release fasteners for filter and chip bagFine filter bag double

Steel strap closure head CH 1900 Orgapack, used, replacement machine for steel strapping line

Cylindrical roller bearings, spherical roller bearings, deep groove ball bearings, thrust ball bearings, thrust ball bearings, thrust bearings -Manufacturer: SKF, Deep groove ball bearing type EE 11 1982-II Original packaging -Outer diameter (D): 57.15 mm (2.25 inches) -Inner diameter (bore) (d): 31.75 mm (1.25 inches) -Width (B): 9.53 mm (0.375 inches) -Number: 71 units available -Price: per piece / minimum order 2 pieces / 10 pieces €75.00 -Cardboard dimensions: 65/65/H20 mm -Weight: 0.1 kg/pc.

HIT automatic edger line with multiple cross cutting and Bongioanni multi ripsaw, Consisting of:, - S-conveyor for separating the boards, - Automatic infeed system, - Automatic optimization LM-Optim, - HIT autmoatic multiple edger, type ASM200, 3 moveable saws, passage width 750 mm, - Outfeed roller conveyor with splitting, - Cross chain transport, - HIT automatic multiple cross cut saw, 3 moveable saws + one fixed saw, - Feed system, - BONGIANNI multi ripsaw, type MH 650-190, double arbor, cutting height 190 mm, max. width 650 mm, - Outfeed system, - Schiepe automatic stacker, - Zimac automatic stacker, Full line in excellent condition.

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 1500; Engine: Deutz TD2.2L3-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 63A, 32A, 16A, Sockets: (230V) 16A; Water Tank Volume [l]: 150

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 3100; Engine: Deutz TCD6.1L6-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 63A, 32A, 16A, Sockets: (230V) 16A; Water Tank Volume [l]: 1100