tapping used for sale

Tapping chucks, thread chucks, tapping chucks, tapping attachments -with: slip clutch -Integrated reverse gear with: fast reverse -Thread sizes: M5-M18 -Recording: MK3 -Dimensions: 380/95 mm -Weight: 2.6 kg

Tapping chucks, thread chucks, tapping chucks, tapping attachments -with: slip clutch -Integrated reversing gear with fast reverse -Thread sizes: M1.4-7 -Recording: MK2 -Dimensions: 70/230 mm -Weight: 2 kg

Key data: 16 , 120 mm

Tapping machine M3-M16 (Steel) used Synchro Tapper STC-P316 is a mechanical feed tapping unit with a total stroke of 120 mm. Interference between fixtures and peripherals is effectively avoided by design and the cutting tool can be easily replaced. In addition, idle time during the tapping process will be significantly reduced by equipping an automatic switching mechanism for fast forward/lead feed auto-switching. The machine can be viewed at any time. Shipping possible at short notice throughout Europe

Compressed air diaphragm pump from Tapflo TR20 TTT including maintenance unit and solenoid valve, sand: ready for operation, good condition Price net from stock

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Tapmatic, thread cutting device -Type: SK40 mount -Dimensions: Ø 63 x 158 mm -Weight: 0.8 kg

Tapping chuck, thread chuck, tapping chuck, tapping attachment -Manufacturer: Tapmatic, thread cutting attachment with slip clutch -Integrated reversing gear: with quick return -Recording: MK2 -Tap holder: Ø 10 mm -Dimensions: 260/160/75 mm -Weight: 2.4 kg

Diaphragm pump, centrifugal pump, water pump, chemical pump, compressed air-operated diaphragm pump -Manufacturer: Tapflo, air-operated diaphragm pump type TX70 ATS-ALP -Flow rate: approx. 78 l/min -Delivery pressure: max. 8 bar -Quantity: 1 piece available -Dimensions total: 210/170/H235 mm -Weight: 7 kg/piece

Max. moulding area: 38 x 50 cm electrics - voltage/frequency: 230 V/Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 20 ...

thread dia.: 20 M turning speeds: 400 U/min thread: M 4 - M 20 M working area: 1900 Rmax. working range: 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German without the perforated table as per Fig. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 M max. turning speeds: 400 U/min thread: M 3 - M 12 M working area: 1600 R max. working range: 500 Rmin. weight: 16 kg Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter, drill chuck holder, drill chuck holder, taper mandrel, MT insert shank -Manufacturer: Albrecht, drill chuck holder -Hoffmann: Art.-No .: 342600 3/24 -Morse taper: MK3 -Drill chuck: B24 -Dimensions packaging: 165/30 / H30 mm -Weight: 0.5 kg

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter -Morse taper sleeve: Morse taper extension -Intake: MK4/MK4 -Number: 2x sleeve available -Price per piece -Dimensions: Ø 48/260 mm / Ø 47/265 mm -Weight: 1.8 kg/pc.

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve -Morse taper sleeve: extension sleeve MK3 -Dimensions: Ø 27/368 mm -Weight: 1.1 kg

Tapping chuck, tapping chuck, tapping chuck, milling tool, tapping attachment -Tapping chuck: Mount MK2 -Type: GH 20 MK2 -Bore: Ø 16 mm -Dimension: Ø 67 x 186 mm -Weight: 1.9 kg

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter, reducing sleeve -Morse Taper Sleeve: Taper reducing sleeve -Intake: MK6 -Recording tool: MK5 -Number: 3x recordings available -Price per piece -Dimensions.: Ø 63.5 x 218 mm -Weight: 2.5 kg/pc.

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: taper reducing sleeve -Type: CM5/4 STAS2293-65 -Dimensions: Ø 45 x 135 mm -Weight: 0.9 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, Morse taper adapter -Morse taper sleeves: extensions / adapter sleeves MK6 -Type: SWN 136/29 MK6-MK6 / MK6-MK5 / MK6-MK4 -Dimensions/Quantity: see photos -Transport dimensions: 500/480/H95 mm -Weight: 50.7 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, extension sleeve -Morse taper sleeve: Morse taper extension MK2 2 pieces -Type: MK2/2 -Total length: 400 / 475 mm -Shipping/Price: complete -Transport dimensions: 475/44/H22 mm -Weight: 2 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, cylindrical spindle sleeve -Spindle sleeve: -Morse taper: MK6/4 -Dimensions: see photos -Quantity: 2 pieces Morse taper sleeves available -Price: per piece -Transport dimensions: 61/61/H95 mm -Weight: 1.3 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: taper reducing sleeve -Type: STAS2293-65M-80/5 -Outer diameter: 80 mm -Inside: MK5 Ø mount, see photos -Overall dimensions: Ø 80 x 205 mm -Weight: 5 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, expansion sleeve -Morse taper sleeve: Morse taper extension MK2 2 pieces -Type: MK2/2 -Total length: 300 / 450 mm -Submission/Price: complete -Transport dimensions: 450/55/H30 mm -Weight: 2.2 kg

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK4 -Tool holder: MK2 -Number: 27x recordings available -Price: per piece -Minimum order: 3 pieces -Total length: mm -Weight: 0.5 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK4 -Tool holder: MK3 -Number: 102x recordings available -Price: per piece -Minimum purchase: 3 pieces -Weight: 0.4 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK5 -Tool holder: MK2 -Number: 51x recordings available -Price: per piece -Total length: mm -Weight: 1.5 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK5 -Tool holder: MK4 -Number: 41x recordings available -Price: per piece -Weight: 1 kg/piece

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve -Adapter sleeve: Morse taper sleeve MK6/5 -Type: IMFCM6/5STAS2293-65 -Dimensions: Ø 65/190 mm -Weight: 2.2 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve -Type: MK2/1 AMUCM2/1 TGL30-21-114 -Dimensions: Ø 19 x 92 mm -Weight: 0.1 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve -Type: MK6/5 -Dimensions: Ø 64/120 mm -Weight: 1.5 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve -Type: Adapter MK2/3 -Dimensions: Ø 36 x 196 mm -Weight: 0.7 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve -Morse taper sleeve: Extension sleeve MK4 -Dimensions: Ø 47/265 mm -Weight: 1.8 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6/5 -Recording: MK6 -Holder tool: MK5 -Dimensions: Ø 63/220 mm -Weight: 3.4 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5/3 -Dimensions: Ø 44/80 mm -Weight: 0.6 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve/adapter sleeve MK4/3 -Dimensions: Ø 38 x 330 mm -Weight: 1.6 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve -Type: MK7/4 -Dimensions: Ø 70/150 mm -Weight: 3.3 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK3 -Type: MK3/2 -Dimensions: 325/24/H24 mm -Weight: 1.0 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve/adapter sleeve MK4/2 -Dimensions: Ø 31 x 125 mm -Weight: 0.4 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5/4 -Dimensions: Ø 45/170 mm -Weight: 1.0 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve, 2 pieces -Type: MK3/4 adapter -Price/Fee: complete -Transport dimensions: 245/100/H50 mm -Total weight: 3 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 4 pieces -Type: MK4/4 / MK4/3 / MK4/2 -Price/Fee: complete -Transport dimensions: 265/95/H86 mm -Weight: 5.8 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 4 pieces -Type: MK5/4 / MK5/3 / MK5/2 -Price/Fee: complete -Transport dimensions: 180/90/H170 mm -Weight: 8.1 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5/4 -Dimensions: Ø 47/300 mm -Weight: 2.8 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK3 5 pieces -Type: 4x MK3/3 / 1x MK3/4 -Price/Fee: complete -Transport dimensions: 400/180/H45 mm -Weight: 7.8 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape, heating sleeve -Type: Ø240 x 135 mm -Item No.: 401 2258 -Heating power: 4200 W -Voltage: 230/400 V -Quantity: 2x heating tape available -Price: per piece -Dimensions: 290/255/H135 mm -Weight: 2.8 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø56 x 25 mm -Item No.: 814 682 65 -Heating power: 215 W -Voltage: 220 V -Quantity: 2x heating tape available -Price: per piece -Dimensions: 130/130/H60 mm -Weight: 0.2 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Heating tape: Heating sleeve -Type: Ø 46 x 22 mm -Heating power: 220 W -Voltage: 230 V -Number: 9x heating tape available -Price: per piece -Dimensions: 180/130/H25 mm -Weight: 0.2 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape, heating sleeve -Type: Ø 96 x 60 mm -Item No.: 401 2627 -Heating power: 670 W -Voltage: 230 V -Quantity: 2x heating tape available Price: per piece -Dimensions: 160/100/H60 mm -Weight: 0.3 kg

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: plastic strapping band 2 rolls -Type: HM 19-725-500 -Width: 19mm -Length: 500 m -Number: 2 rolls -Price/Delivery: complete -Box dimensions: 310/300/H310 mm -Total weight: 12.8 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Manufacturer: Artykuly Techniczne, adapter sleeve: Morse taper sleeve MK6/5 -Type: PTPk-6/5 -Dimensions: Ø 64/130 mm -Weight: 1.5 kg