We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,888 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
bore diameter: 50 mm throat: 3000 mm workpiece height: max. 200 mm total power requirement: 75 kW weight of the machine ca.: 27 t dimensions of the machine ca.: m Brand: CMA Type: GRD50 CNZ 13030 Year of make: 2010 Capacity: 50 mm X: 3.000 mm Y: 13.000 mm Z: 400 mm Spindle taper: N: 3.000 Power : 75 kW Speed: 3.000 RPM Machine weight: 27.000 kg Tap capacity: M30 Drilling depth: 150-200 mm Bed: 13,000 x 3,000 mm Max. workpiece weight: 1,500 kg /m2 Tool changer: 12 pieces External spindle cooling Chip conveyor Can be seen working at a external location The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Lye diving device Jufeba 78 with lye drain tap Stand-alone stainless steel unit incl. driving table with storage and locking castors with 4 row division suitable for sheet size 580 x 780 mm, Dimensions in mm: 700 x 902 x 880 WxDxH Used equipment cleaned and tested Visit our large Bakery Machinery Center!
used
For sale : 500L useful fermenter Atmospheric Insulated Sampling buffer tap EPDM seals Stainless steel valve plugs Supplied with solenoid valve Price mentioned per unit 6 available
used
Hobart CNA-E Basket Flow Machine Manufacturer: Hobart Model No.: CNA-E Type: Basket Flow Machine 25.10 kW 380-415V/50 Hz/3/ N Year of construction: 2007 Serial No.: 86463499 HOBART Heat Pump Type: CHP 18 Serial number: 002 Article number: 75869 Year of construction: 2007 Refrigerant type: R134a (capacity 3.2 kg) Maximum pressure: high-pressure side 28 bar Maximum pressure: Low pressure side 8 bar Compressor: max. flow rate 17m3/h Speed: 2,900 rpm With high-performance pre-wash zone as well as wash, rinse and dry zone Made of high-quality stainless steel Electronic control SMARTRONIC With 2 speeds Emergency stop button and main switch Efficient double flushing system Built-in "autotimer" system with automatic shut-off when no baskets are detected Emptying the machine at the push of a button Constant filtration of the water in the pre-wash and washing area b ...
GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal700 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmSpindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmClamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine DiskNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40ba ...
new
feed pressure: 10,0 bar intake capacity: 539 L/min Effective free air delivery: 377 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 3,0 kW weight of the machine ca.: 80,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2x cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head - for optimum temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - Powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Direc ...
new
feed pressure: 10,0 bar intake capacity: 727 L/min Effective free air delivery: 582 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 4,0 kW weight of the machine ca.: 91,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directi ...
used
Volume: 11 hl, Operating temperature: 50 °C, Width: approx. 1 m, Height: approx, 2,75 m, Material: stainless steel, Position: vertical, Base construction: insulated, Features: cartridge radiator, level indicator (hose), sampling tap, manhole (cover), overflow, 2 outlets with manual valve flaps , Code: 5278
used
20L capacity industrial blender with on/off switch, drain tap and four-legged stainless steel support to keep the blender at the perfect height for work. Characteristics Length: 720mm Height: 1700mm Width: 520mm Capacity: 20 liters
used
Carel HeaterSteam UR020HL10S isothermal Steam Humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be normal tap water or completely demineralized water. The heat generated by the heating elements heats the water up to a temperature of 100 °C. Specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Vapour pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G outside More items - new and used - can be found in our shop! International shipping costs on request!
used
Stirring tank 150 liters with agitator 0.6 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel tank 150 liters with drain tap. Rollable aluminum frame with aluminum profiles 45 45 mm. 4 swivel castors, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material: Stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244 mm, material stainless steel 1.4581, blade adjustable in angle.
used
153,500 LITRE STORAGE TANK / WINE TANK / AGITATOR TANK WITH SIDE MIXER, UPRIGHT MADE OF V2A MJ UNI-RILL https://eurolux.de/product/24-0507euba-153500-liter-lagertank-weintank -ruhrwerkstank-mit-seitlichem-ruhrwerksmixer-stehend-aus-v2a Tank top floor: Conical bottom 8 reinforcement profiles 4 crane eyelets Cathedral central ⌀ 500 CIP cable DN50 Cylinder: Manhole 440 x 340 mm Tasting tap DN15 Clearance drain with butterfly valve DN 65 lockable exterior door with propeller agitator - Tank 1/2 agitator right (Stelzer with Siemens motor) - Tank 2/2 agitator left (Stelzer with Siemens motor) Tank underbody: Flat bottom with 3% slope with residual drain pipe pulled forward with butterfly valve DN 65 Foot ring with 8 mounting flanges
used
17,000 LITRE STORAGE TANK/WINE TANK, RIEGER, UPRIGHT MADE OF V2A https://eurolux.de/product/24-0513euba-17000-liter-lagertankweintank-r ieger-stehend-aus-v2a MJ UNI-RILL Tank top floor: Sloping floor with 3 % floor slope 4 reinforcement profiles 2 crane eyelets Threaded socket DN65 reduced to DN50 central downward drawn CIP cable DN50 connection DN 50 front Cylinder: Level indicator with strip and scale Tasting tap DN25 Clear drain with angled seat valve DN 50 Tank underbody: Cone bottom with residual drain pipe pulled forward in the middle with disc valve DN 50 tank wall 4 feet with domes - height adjustable with washers
used
52,700 LITRE WINE TANK / STORAGE TANK, EXTINGUISHING WATER TANK, ROUND, MADE OF STEEL https://eurolux.de/product/24-0504euba-52700-liter-weintank-lagertank- loschwassertank-rund-aus-stahl MJ UNI-RILL Surface coated on the inside, food-safe Volume 52700 L Steel as a material Total height 9700 mm Cylinder height 9100 mm Diameter 2700 mm Vertical design Last Use Food Tank top floor: arched bottom 2 crane eyelets Nozzle DN50 Cylinder: Manhole Ø 410 x 310 mm oval Tasting tap DN15 Clear drain DN50 Tank underbody: Flat bottom with 3 % slope with outlet beading pulled forward with reduction to DN 50
used
9,500 LITRE STORAGE TANK/WINE TANK MADE OF V2A, WITH STURDY FRAME FRAME, LONG OVAL https://eurolux.de/product/24-0505euba-9500-liter-lagertank-weintank-a us-v2a-mit-stabilem-rahmegestell-langovalliegend Specifications Surface inside 2B=IIIC sanded Surface marbled on the outside Material V2A (AISI 304) 1.4301 Width 1730 mm Total height 2750 mm Depth 3700 mm Oval-horizontal design Number of feet 4 Last Use Food AS UNI-RILL Front: Level indicator with strip and scale (connection) Manhole oval 400 x 350 mm Tasting tap 1/2" Airlock DN 50 Clear drain DN 50 Residual drain DN 50 height-adjustable feet with domes and washers
used
2,000 LITRE SPEIDEL WINE TANK/ STORAGE TANK/ STACKING TANK SADDLE TANK UPRIGHT, ROUND MADE OF V2A https://eurolux.de/product/24-0555euba-2000-liter-speidel-weintank-lag ertank-stapeltank-satteltank-stehend-rund-aus-v2a Manufacturer: SPEIDEL Surface inside IIID Surface marbled on the outside Volume 2000 L Material V2A (AISI 304) 1.4301 Total height 1800 mm Cylinder height 1150 mm Diameter 1400 mm Vertical design Number of feet 3 Last Use Food AS UNI-RILL Topsoil: arched bottom 2 crane eyelets Bottom beading upwards with airlock DN 50 Tank cylinder: Manhole oval 430 x 320 mm Tasting tap DN 15 Threaded weld nozzle DN 15 for level indication Subsoil: arched bottom Forward-drawn outlet beading in the middle, flush with the tank DN 50 with butterfly valve 3 saddle feet
used
Used vacuum homogenising mixer type HYJRZ-50. Technical data: - Machine made of stainless steel, - Tank capacity: 65 L, - Working volume: 50 L (minimum 30 L), - Mixer: 1.5 kW 60 rpm, with inverter for speed control, - Homogeniser: constant speed 2.2 kW 2900 rpm, with inverter to regulate speed. - Power supply: 3 phases 380v/50hz, - Vacuum pump helps to pressurise the tank, - Lower 2 electric heaters are made of high quality stainless steel, tap water valve for heating the jacket, temperature control on the control panel, - Maximum heating temperature by water heating 100 °C , - Maximum heating temperature by oil heating 150 °C, - Minimum heating temperature is room temperature; - Heating power 6kw, - Cooling method: by cold water or chilled water through the central jacket. - The temperature sensor for temperature measurement is located in the control box. - Wei ...
used
Used cooking kettle, 570 liters -as new- - only 1 year in operation - heavy industrial version - Boiler made of chrome-nickel steel - Low energy due to full insulation - self-supporting, no iron frame - insulated double lid with chrome-plated Echtermann hinge - Lid opening possible in any position - Safety outlet tap 1 1/2 - automatic control - Preselection and operating time clock - Core temperature control - separate control cabinet - Natural gas, via fan burner (HERMANN, type: HG75) - Condition: as new, checked and prepared - Original price: EUR 14.600,- - Delivery, assembly and instruction EUR 890,- - Conversion to oil heating possible (on request) Specifications: - Boiler capacity: approx. 570 L. - Internal dimensions: W 1,000 x H 910 mm - External dimensions: W 1,300 x D 1,250 x H 910 mm Free from March 2023 The cooking kettle is in mint condition and ...
new
Boiler capacity: 270l; Volume flow rate: 680l/min; Motor power: 5.5 kW; Refrigerant dryer: Yes; DESCRIPTION The two-stage compression 2-cylinder high-performance unit achieves a very low speed, resulting in particularly smooth and low-vibration running This ensures a longer service life due to less wear and Large fan wheel and a cooling air deflector on the cylinder for optimal compressor cooling Aftercoolers with cooling fins and intercooler to the aftercooler ensure a low tank inlet temperature and thus less moisture in the compressed air quality electric motor with high tightening torque electric motor equipped with motor protection switch With high-quality CONDOR pressure switch Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain tap Ten years warrant ...
used
Turning diameter max: 20 mm Turning length max: 320 mm each spindle Drilling diameter max: 10 mm Max tap diameter: M8 Main spindle Speeds: 200 - 10,000 rpm. C-axis index: 0.001° Jerk spindle Speeds: 200 - 8,000 rpm. C-axis index: 0.001° Driven tools: 4 places / 200 - 5,000 rpm Driven tools rear: 4 places / 200 - 5,000 rpm. Tool turret: 10 places Bar feeder: FMB Diameter: 3 - 26 mm Rod length: 4,200 mm Country of origin: Japan Machine weight: 2800 kg Machine LxWxH: 3000 x 1400 x 1800 mm
used
Juno electric cooking kettle 100 l water bath 2 x 1/1 GN Manufacturer: Juno Type: 7773-3 Type: Cooking kettle Boiler size: 100 dm³ Internal boiler configuration: 2 x 1/1 GN Installation: Floor-free Power: 17.8 kW Mains voltage: 400 V Water tap: swivel arm Width: 850/900 mm Depth: 800 mm Height: 650 mm Weight: 125 kg More cooking kettles - new and used - can be found in our shop! International shipping costs on request!
used
Juno 8744-3 Electric tilting frying pan with Gusstiegel Juno electric tilt frying pan with Gusstiegel Manufacturer: Juno Type: 8744-3 Installation: Floor-free Power: 15,2 kW Mains voltage: 400 V Water tap: swivel arm Manual tilting system with handwheel Usable frying area: 800 x 600 mm Width: 1400 mm Depth: 850 mm Height: 350 mm Weight: approx. 260 kg More tilting frying pans - new and used - can be found in our shop! International shipping costs on request!
used
Brand: MARTIN Type: T90 with 7 spindles Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 240 mm (260 possible with ingekammerte planing heads) Planer thickness: 5 - 170 mm 1. Planer shaft dresser: Spahn removal max. 10 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 2&3. Spindle: Vertical callibrier planing and contour shafts, Spahn removal max. 10 mm, clamping length 160 mm, flight circle min. ø100 max ø125 mm, Z-4, 6.000 rpm, 7.5 KW 4. Thickness shaft/upper shaft: horizontal spindle tap removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 5. Top spindle 2nd profile shaft horizontal, Spahn removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 - max ø180 mm, 6.000 rpm, 7.5 KW, adju ...
used
Kitchenette Premium cooking block MKN 370x90x86 cm, composed of: - deep roaster: frying surface 44x56x10 cm, 2 zones switchable 50°C-300 °C, 400 V, 7.2 kW, 14 A, plug 16 A, - Double fryer London II: 2×12 litres, basket size 16x30x11 cm, swivel radiator for easy cleaning, oil drain tap, 400 V, 12 kW, 18 A, plug 32 A - Hob: 2 zones separately switchable, 34×63 cm, 400 V, 6 kW, 9 A, plug 16 A - Bain Marie: 230 V, 3 kW, 12 A - Heating cabinet: 30°C to 110°C, 71x74x33cm - Gas stove 6 flames: set to liquefied petroleum gas 30 kW, with electric oven. 400 V, 5.9 kW, top and bottom heat separately switchable, 50 °C – 300 °C, for 2/1 GN - incl. railing optionally mountable on both sides or on one side for center installation or wall installation, width of the railing incl. spacer 12 cm
used
Drilling capacity: 50 mm Radius: 2070 mm Spindle taper: 350 Arm Length: 2070mm Max. drill Ø cast: 50mm Max. tap Ø: M48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Floor / table area: X Travel 1200mm Speeds / ranges: 800Rpm Spindle Taper: 5ISO/Bt/Mk Power: 8kW Length: 5800mm Width:   ...
used
Drilling capacity: 25 mm Radius: 32 mm Spindle taper: 1 incl. X/Y Table coordianten incl. coolant system Max. drill Ø steel:25mm Max. drill Ø cast: 32mm Max. tap Ø: M 20M Stroke pinole: 120mm Throat: 260mm Column sleeve: 110mm Spindle Taper: 3ISO/Bt/Mk Speeds / ranges: 2160Rpm Table Length: 500mm Table Width: 350mm Power: 1,5kW Length: 800mm Width: 400mm Height: 1800mm Weight: 260kg
used
Drilling capacity: 32 mm Radius: 22 mm Spindle taper: 32 Max. drill Ø steel:32mm Max. tap Ø: 22M Stroke pinole: 150mm Throat: 835mm Column sleeve: 120mm Spindle Taper: 3ISO/Bt/Mk Speeds / ranges: Vario 1170Rpm Table Length: 480mm Table Width: 400mm Power: 2kW Length: 1000mm Width: 500mm Height: 2100mm Weight: 340kg
new
dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner ...
used
Drilling capacity: 50 mm Throat: 230 mm Spindle taper: 42 Max. drill Ø steel:50mm Max. tap Ø: M42M Stroke pinole: 230mm Throat: 375mm Column sleeve: 200mm Spindle Taper: 4ISO/Bt/Mk Speeds / ranges: 1032Rpm Table Length: 600mm Table Width: 600mm Power: 3kW Length: 610mm Width: 1020mm Height: 2450mm Weight: 950kg
used
54.000 Litres Storage tank with propeller mixer sideways in V2A KK UNI-ALBI Measurement: Total height: 6,500 mm Cylinder height: 4.500 mm Diameter: 3,600 mm Material: V2A Surface: Inside and outside 2B=IIIC Upper bottom: with ventilation connector with inclined cone bottom with 2 crane eyes Cylinder: with level indicator with 3 threaded connector DN 65 with manhole Ø 450x350 oval with sample tap with ladder hook with propeller mixer sideways mounted Lower bottom: with dished end with rest outlet pulled forward with butterfly valve DN65 with 5 calotte feet height adjustable
used
Hand oil pump, ecabinet, oil cabinet, oil conveyor, oil dispenser -Content: approx. 60 l -Compressed air pump -Hose with tap -Transport dimensions: 500/500/H950 mm -Weight: 35 kg
used
Cam switch, 6 steps 36-pole, tap changer without zero SÄLZER S320 7.5 kW 25 A 690 V scale: 1 - 6, coarse aperture: 89 x 89 mm New Dimensions: 160 x 90 x 90 mm
used
Cam switch, 2 steps 12-pole, tap changer without zero SÄLZER S225 11 kW 32 A 690 V scale: A,B aperture: 65 x 65 mm New ! Dimensions: 115 x 65 x 65 mm
used
Cam switch, 10 steps 24-pole, tap changer MERZ Series 451 F451/1222.0400 22 kW 32 A 690 V Scale: 1 - 10 aperture: 65 x 65 mm New ! Dimensions: 180 x 65 x 65 mm
used
Working current release, with cam switch 3 steps 16-pole, tap changer with remote operation KRAUS & NAIMER V360 size S1 < /br />Control voltage: 110 / 125 V 50 / 60 Hz switch: C26 11 kW 660 V New ! Dimensions: 165 x 130 x 70 mm
used
Cam switch, 6 steps 32-pole, tap changer ELGERO 63960.201/187 ( 63960201187 ) TGL 8879 16 A 500 V Mounting foot: 85 x 60 mm spare part e.g. for WMW Heckert SWM SP63 ! used, checked ! Dimensions: 230 x 120 x 70 mm
used
Transformer, control transformer, single-phase transformer, isolation transformer, safety transformer TW, TRANSFORMER CONSTRUCTION WALDENBURG Type: H 4 M 85 Art.Nr.: 943 30 70 9 0,1 kVA Primary: 220 V 1AC Secondary: 12.6 V 4 A with tap 2 / 4 / 6.3 V 50 Hz New ! Dimensions: 85 x 65 x 90 mm
used
Power resistor, wire resistor with adjustable tap, 3 pieces PAGUS 4636/3 Resistance: 690 ohms Power: 60 watts amperage: 0.3 A tolerance: + 30 % ceramic body: 160 mm x Ø 31 mm used, tested ! Dimensions ( power resistor ): 181 x 40 x 42 mm Dimensions ( packaging ): 220 x 90 x 90 mm
used
Power resistor, wire resistor with adjustable tap, 3 pieces PAGUS 4636/4 Resistance: 170 ohms Power: 60 watts amperage: 0.6 A Tolerance: + 30 % Ceramic body: 160 mm x Ø 31 mm used, tested ! Dimensions ( power resistor ): 181 x 40 x 42 mm Dimensions ( packaging ): 220 x 90 x 90 mm
used
Cam switch, 3 steps 24-pole, tap changer BACO PR16 7.5 kW 600 V 16 A AC spare part for Oerlikon welding machine CY 385 MPR ! used, tested ! Dimensions: 120 x 66 x 66 mm
used
Cam switch, 6 steps 36-pole, tap changer without zero position SÄLZER S320 7.5 kW 25 A 690 V scale: A - F, FINE aperture: 89 x 89 mm New ! Dimensions: 160 x 90 x 90 mm
used
IBC Container, Liquid Container SCHÜTZ ECOBULK MX1000 Volume: 1000 l max 1650 kg without drain tap unrinsed ! used, checked ! Dimensions: 1120 x 1000 x 1180 mm
used
Citrocasa 8000 SB-ATS orange juicer Comes from an insolvent REWE store Built in 2018, but was not in use for the last two years until the eviction The machine makes a very neat impression The protective cover on the left side has a nose broken off. This does not affect the function, the cover can be replaced. There is still cleaning and disinfecting agent in the base cabinet with which the machine can be kept clean and germ-free. It starts up when the tap is actuated, but can also be switched to continuous operation.
used
3 leaching curtains Stainless steel version with drain tap mobile with brake for sheet metal coating 580 x 780 mm with tilting device for bread rolls Connection 400V, 1.1 kW, 16A-CEE plug Dimensions approx. 1400 x 850 x 1600 mm, WxDxH Working position 3000 x 850 x 950 mm, WxDxH Used machine cleaned and functionally tested.
used
workpiece diameter: 200/250 mm threading length: 500 mm thread pitch: 6 - 72 mm grinding diameter - min.: 1 mm centre distance: 800 mm max. module: 8 spindle speeds: 0,19 - 32 U/mm pitch angle: 40 ° relief of the tap: 0,015 - 4 mm grinding wheel diam. min/max.: 275 / 350 total power requirement: 11 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,8 x 2,3 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
thread capacity: M 16 threading depth: 80 mm throat: 250 mm table-size: 400 x 500 mm spindle turning speed range: 9: 280 - 1800 U/min quill stroke: 80 mm thread capacity: min. M 4 mm dayligth: 315 mm spindle taper: B 18 thread capacity: in Alu: M 22 total power requirement: 2,2 kW weight of the machine ca.: ca. 200 kg dimensions of the machine ca.: xxxxxx 0,86/1,17 m Condition: ready for operation: CE signed: Electric 380 Volt: Base: Automatic thread cutting machine in table design, threads with conductive cartridge, single and continuous stroke, tap breakage protection,switching from ri- to le-running via double friction clutch that means only the work spindle will switched, pole-changing motor, faster return, column height adjustable, intervention protection secured by a magnetic switch. The thread cutting performance refers to material ST 37. Minimum quantity lubrication make HPM ...
new
thread dia.: M6 - M36 turning speeds: 30 - 150 U/min working area: max. 1200 R angle adjustable from - to: 0 - 90 Grad voltage: 230 V engine output: 1200 W weight: 65,0 kg - Includes quick-change chuck - for using taps - for through and blind holes - Schwenbkare motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - Significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes large radius swivel arm - for easy positioning of the tap on the workpiece - High economic efficiency thanks to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-chang ...
used
• Suppository production line for prefabricated plastic cast packaging • Working direction from right to left • Output max. 10,500 suppositories/h • Material of cast packaging PVC/PE, PS/PE, PVC/PVDC/PE • Dimensions of pouring packages: Container spacing 17.3 mm (pitch), container height 44-51 mm depending on format tools, standard version. • Casting packaging Roll material printed and unprinted, roll diam. 500 mm, pick-up diam. min. 100 mm • Available format parts for container heights 44 mm (1.1 g) and 51 mm (2 g) • Polystar 100 GE film sealing device for sealing the film ends • Contactor control • Drive 400V/50Hz Line consisting of: Filling machine Citopac SFD-10 CP • 2 filling stations, distance 17,3 mm • -osing range per filling point 0.5-3.5 ml • Dosing via heatable intermediate container 0.3 l and heatable tap head with rotary slide cont ...
used
• Useful capacity 663 l • Double jacket 48 l • Operating temperature 160°C • Operating overpressure tank -1/2 bar • Double jacket max. 6 bar • Container can be tilted for emptying • Lift lid for emptying by external lifting device (not included) • Parts in contact with product made of stainless steel 1.4435 (AISI 316 L) • Propeller agitator 2.6 kW • Anchor agitator with side scraper 2.2 kW • Temperature display • Pressure gauge • Hose connection in pressure lid with spear tap • Sight glass • Lighting • Pressure fittings • Drive 380V/50Hz
used
Material: 316 L stainless steel Tank pressure: 50 psi / approx. 3.5 bar Double jacket pressure: 90 psi / approx. 6 bar Temperature: 300?C Heat source: external (not supplied) Diameter: 600 mm / Depth: 600 mm Hinged lid 3 clamp connections diameter 50 mm 1 temperature tap Total opening / closing 8 clips Total draining Year: 1988 Mobile unit : 4 wheels