tanks used for sale

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Cylindrical, Vertical stainless steel tank 25BBL Working capacity Supplied By East field Process Diameter Approx 2400mm Overall height Approx 2850mm Top entry man way door External cooling Jackets on tank shell Insulated with stainless steel cladding over Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Cylindroconical Vessel Vertical stainless steel tank Floor Length Cladding Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 2300mm Side entry man way door with DIN 15 Male Sample Port Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Temp Probe Pocket Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000L Vessel - Dish Bottom Vertical stainless steel tank Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 1900mm Side entry man way door with DIN 15 Male Sample Port and Sample Tap Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male Temp Probe Pocket 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Vessel - Dish Bottom Vertical stainless steel tank Diameter Approx 1050mm Overall height Approx 1650mm Side entry manway door Single skin stainless steel 1.5" RJT Top and Bottom Fittings Sight Glass DIN 80 Top fitting for gas vent 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Porter Lancastrian 1500L/10BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Overall height Approx 2900mm Single Skin Stainless Steel Inlet 1" RJT Side Manway Sight Level Tube Front Sight Port 3 x Legs Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Brewing Kettle /Hot water tank 75HL Vertical cylindrical stainless steel External cladding and insulation finished in riveted stainless steel Mounted on 4 stainless steel legs with adjustable feet Working Capacity 75HL Vessel is fitted with a Lanemark gas burner Vessel is fitted with a wedge wire floor for whole flower hop retention. Previous owner devised a successful method for using pelletized hops utilising an upstand on the central outlet below the wedge wire floor. For more information and more available stock please visit us at - advancedbrewing.co.uk

Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Rectangular manhole 320 x 420 mm - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Upper door 320 x 420 mm - Connection for ventilation

We offer two used storage containers. Overall height: 1980 mm Diameter:625 mm Capacity: approx. 300-350l

For sale are 2 agitator tanks from the manufacturer Gruss. The tanks were previously used in a food factory and are in pristine condition. Technical data: Manufacturer: Gruss Capacity: 5.000 Ltr. Year: 2011 Dimensions: Height: approx. 4.20m Diameter: approx. 1.90m Material: 1.4301 If you have any questions, please feel free to contact us.

65,700 liter ZKG tank/ pressure tank/ storage tank with cooling jacket and insulation Material No. V2A Year of construction 1990 Total height 10580 mm Cylinder length 5750 mm diameter 3400 mm Outer diameter 3870 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground

68,150 liter ZKG tank/ pressure tank/ storage tank LARGE with cooling jacket and insulation Material No. V2A Year of construction 1996 Total height 10870 mm diameter 3400 mm Outer diameter 3870 mm Cylinder length 6000 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground

68,150 liter ZKG tank/ pressure tank/ storage tank LARGE, with cooling jacket and insulation Material No. V2A Year of construction 1995 Total height 10870 mm diameter 3400 mm Outer diameter 3870 mm Cylinder length 6000 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground

51,570 liter ice water tank/pressure tank with insulation Material No. V2A Total height 10200 mm diameter 2900 mm Outer diameter 3480 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Minimum/maximum operating pressure (HP) 0.4 bar Operating temperature 90 °C Cylinder length 6500 mm Year of construction 1994 dished end/ domed end Cylinder: 15cm insulation 4 x sensors Manhole 440 x 340 oval Underbody: Dished end/domed end with foot ring and crane eye

1,000 liter insulated beer tank/storage tank with insert heater Material No. V2A Year of construction 1998 Total height 2060 mm diameter 1000 mm Outer diameter 1150 mm execution isolated Topsoil: downward-facing filling pipe DN25 Threaded fitting 1 1/4" Ventilation nozzle DN80 Cylinder: 50 mm insulation Weld-on fitting DN40 tangential (lateral) Insert heater Threaded weld-on fitting DN15 Underbody: dished end/curved end Forward-extended residual drain pipe with DN40 threaded connection, centrally located 3 profile feet with adjustable height caps

65,900 liter ZKG tank/ pressure tank/ storage tank LARGE with cooling jacket and insulation Material No. V2A Total height 12400 mm diameter 3000 mm Outer diameter 3480 mm Exterior surface 2B=IIIC ground Interior surface 2B=IIIC ground

53,700 liter brewing water tank with insulation, built in 2022 Material No. V2A Total height 10500 mm Height 9700 mm diameter 2800 mm Outer diameter 3230 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Year of construction 2022

Equipment: Overpressure,Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 83,500,Max. overpressure: 0.5,Max. permissible overpressure Operating temperature : 50,Specific gravity of the medium: 1.35,Design: upright,Stand shape: feet height adjustable,Number of feet: 8,Diameter inside: 3,850,Cylindrical height: 600,Total height: 8.690,Wall thickness underbody: 5.4,Wall thickness upper floor: 3.0,Year of construction: 2004,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: Yes,Equipment: Ventilation/ventilation, spray head, crane eyelets,Outlet: DN100 DIN 11851 ,Remarks: Specified total height

Equipment: Heatable/coolable,Manufacturer: Hinke Tankbau,Condition: used,Volume: 53,000,Design: horizontal,Standing shape: feet,Number of feet: 6,Heating/cooling (filter bar): available,Temperature control cylinder: rectangular half-tube coil,Diameter inside: 3,000,Cylindrical length: 6750,Total length: 7,900,Type plate: Yes,Outlet: available,Remarks: 3 reinforcement rings Fe with 2 feet each (Attention: tank diameter lower than tank feet should be noted when setting up) 1 manhole in the front floor, Last purpose: Brewery,Material in contact with the product: V2A 1.4301 (AISI304),Material

Condition: used,Volume: 30,000,Design: horizontal,Stand shape: Saddles,Diameter inside: 3,100,Cylindrical length: 3700,Total length: 5,000,Wall thickness bottoms: 3.7,Wall thickness cylinder: 3.0,Type plate: No,Equipment: Spray head,Outlet : 65,Remarks: 2 loose bearing shells made of Fe (galvanized) each 1 manhole approx. 350 x 445 mm in the front floor each stronger dents in the cylinder,Material in contact with the product: V2A 1.4301 (AISI304), Bottom Bearing: No,Current Interferer: No,Bottom Bearing: No,Current Interferer: No

Equipment: Overpressure,Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 14,000,Max. overpressure: 0.5,Max. permissible overpressure Operating temperature : 50,Specific gravity of the medium: 1.35,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 2,800,Cylindrical height: 1,500,Total height: 3,200,Wall thickness underbody: 4.5,Wall thickness cylinder: 3,Wall thickness upper floor: 3,Year of construction: 2004,Technical documentation: Drawing,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: Yes,Equipment: spray head, crane eyelets,Spout : 65,Note: slight adhesions, Remarks:

Equipment: Safety jacket,Condition: unused,Volume: 15,000,Design: horizontal,Diameter inside: 2,200,Diameter outside: 2,350,Cylindrical length: 3400,Total length: 4,460,Wall thickness floors: 5.3,Wall thickness cylinder: 6,Year of construction: 2019,Technical documents: Drawing, various documents, statics,Manhole / dome: on the container,Type plate: Yes,Equipment: crane eyelets, safety jacket (double-walled leakage monitored),Outlet: not available,Remarks: Safety double jacket made of V2A around the tank various technical documents (in French and English) manhole DN 500 with

Equipment: Heatable/coolable,Condition: used,Volume: 12,280,Design: rectangular,Stand shape: feet,Number of feet: 7,Heating/cooling (filter bar): available,Temperature control inside: cooling plate,Total height: 2,970,Total width: 1,500,Total length: 4,450,Type plate: No,Outlet: DN40 DIN 11851 ,Remarks: 2 cooling plates inside the tank 1 manhole approx. 300 x 400 mm in the front floor slight differences in the foot length (take into account when setting up accordingly) , last purpose: wine storage,material in contact with the product: V2A 1.4301 (AISI304),material temperature control system: V2A 1.4301

Equipment: Overpressure,Manufacturer: Gebr. Hagemann Beckum,Condition: used,Volume: 10,600,Max. overpressure: 0.5,Max. permissible Operating temperature : 100,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 1,600,Cylindrical height: 4,800,Total height: 6,200,Wall thickness underbody: 5,Wall thickness cylinder: 3,Wall thickness upper floor: 3,Technical documents: Drawing, TÜV papers,Manhole / dome: in cylinder,Type plate: Yes,Equipment: crane eyelets,Outlet : 37,Note: slight adhesions,Remarks: Diameter manhole 500 mm Small dents in the cylinder Differences in outlet sizes

Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 7,400,Design: rectangular,Stand shape: feet height adjustable,Number of feet: 4,Total height: 3,700,Total width: 1,320,Total length: 2,550,Type plate: No,Equipment: Level indicator (without guarantee), Disc,Outlet: DN65 DIN 11851,Remarks: 1 manhole approx. 325 x 420 mm in the front floor Tank were professionally cleaned and overhauled by the manufacturer in 2024 Brand new residual drain valves (reduce the size screwed on the Outlet on DN 50 DIN 11851 (with disc valve)) and manhole seals were installed

Equipment: Agitator,Condition: used,Volume: 820,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 890,Cylindrical height: 1,200,Total height: 1,800,Manhole / dome: in the topboard,Type plate: No,Outlet: 32,Note: slight adhesions,Remarks: Manhole approx. 400/430 mm Tank with small dents,Last purpose: Beverage industry,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Power: 1,Agitator: Propeller, Voltage Volt: 220/380,Bottom Bearing: No,Current Interferer: No,Agitator Arrangement: Side of the Cylinder,Agitator Equipment:

Equipment: Insulation, agitator,Condition: used,Volume: 100,000,Lower bottom: conical bottom,Design: standing,Standing form: Standing frame,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: Stainless steel,Diameter inside: 3,600,Total height: 12,300,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation, crane eyelets,Remarks: Underbody outside insulated with PU foam (see pictures),Last use: Food,Material In contact with the product: V2A 1.4301 (AISI304),Agitator: Propeller,Bottom bearing: No,Current interferer: No,Agitator arrangement: on the side of the

Condition: used,Volume: 11,800,Design: upright,Stand shape: feet height adjustable,Number of feet: 3,Diameter inside: 2,080,Cylindrical height: 3,000,Total height: 4,450,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: No,Outlet: Flange DN100,Remarks: In 1 tank the cylinder is marbled on the outside,Last purpose: Winery,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No, Current Interferer: No,Floor Bearing: No,Current Interferer: No

Equipment: Heatable/coolable,Condition: used,Volume: 13,650,Design: rectangular,Base: feet,Number of feet: 7,Heating/cooling (filter bar): available,Temperature control inside: cooling plate,Total height: 2,780,Total width: 1,450,Total length: 4,400,Type plate: No,Outlet: DN40 DIN 11851,Remarks: 3 cooling plates inside the tank (1 x loose, see photos) 1 manhole approx. 340 x 440 mm in the front floor smaller dents in the top floor, last purpose: wine storage,material in contact with the product: V2A 1.4301 (AISI304),material temperature control system: V2A 1.4301 (AISI304),material feet:

Equipment: Insulation, Overpressure,Manufacturer: METALINOX,Condition: used,Volume: 7,500,Max. overpressure: 5.0,Design: upright,Standing form: feet height adjustable,Number of feet: 4,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 1,900,Diameter outside: 2,034,Cylindrical height: 2,000,Total height: 4,400,Wall thickness floors: 5,Wall thickness cylinder: 5,Year of construction: 2005,Technical documents: Drawing, CE marking and Declaration of Conformity,Manhole / Dome: in the topsoil,Type plate: Yes,Equipment: Spray head, crane eyelets,Outlet: DN80 DIN