tank used for sale

Description: Lot consisting of 1 THERMEC 11 bar 500 liter tank and 1 SIC 500 liter tank Approx. Onsite Dimension. (l x w x h): 1,600 x 700 x 2,300 mm, weight approx.: 400 kg

Description: 1,746 operating hours NEW Air filter & oil Including connection hose and connection cable with plug SAIP compressed air tank galvanized with TÜV documents driving power to: 4 kW, flow rate: 402 l/min, operating pressure: 15, tank size: 500, modelname / number: WCF403246, year of manufacture: 2,005, Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,400 mm, weight approx.: 200 kg

We offer you 3 pieces of V2A steel tanks, tank height without stands 9.6 m, tank height with stands 10 m, diameter 2.5 m. Unfortunately, type plates are not available, further details are also missing. Most recently, before dismantling, water was stored in the tanks. More information is not known. You can inspect the tanks at our premises in Scheemda, the Netherlands.

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

Kat-No 08-1208 in very good condition Stainless steel tanks installed made of V4A - round standing - Condition: good Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat. No. 10-1765 in very good condition With manhole round top 400 mm With vent dome DN 300 With CIP cleaning With filling nozzle DN 50 With threaded connection connector DN 50 With level indicator with bar and scale With agitator on the side With conical bottom m.Remaining outlet DN 50 Height-adjustable on 4 calotte feet Dimensions: Total height: 4000 mm Body height: 2450 mm Diameter: 2400 mm with agitator: 2800 mm The price is for a tank. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 All prices are ex works plus law. Vat Freight cost share: by scope of delivery Delivery: from 97753 Karlstadt-Karlburg Intermediate sale reserved Sightseeing is also possible in the evening or on weekends by appointment.

Cat. No. 08-1209 in very good condition! Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat. No. 08-1210 made of V4A - round standing - Condition: good Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat. No. 11-2515 in very good condition! Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with 1 x welded nozzle centrally in the upper floor through: 50 mm with filling nozzle at the top: 90 mm still facing the front with 2 x transport eyelets with 1 x ladder hook with 1 x holder grif with lace bottom on top Body: with manhole 420 x 320 mm with clear drain DN 50 with tasting valve connection Underbody: with forward pulled outlet pipe DN 50 with lace bottom at the bottom adjustable with 4 calotte feet with base plate Dimensions and weight: Total height: 4500 mm Diameter: 2800 mm Weight: 1500 kg The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law ...

Kat. No. 09-1049-3 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature controll unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-2 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,050 mms of weight: 106 kg surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-4 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 2,100 mms of weight: 136 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature control unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 06-1101-6 new with Floating Cover - round vertical on Feet Cat-Nr.06-1101-6 available : 5 Standard Features: • Manufacturer: Eurolux GmbH • Material: 1.4301 acc.DIN 17440 AISI 304, inside 3IIId = 2B – outside marbled • Surface fully pickled, passivated and neutralised • All welds are treated and not porous to prevent the occurance of unwanted bacteria. • Firm Legs that ensure stability of the whole vessel • Drain Port DN 50 • Level Indicator • Floating Lid with Accessories • Xiring-escape Valve • Air Pump • Transport Hooks for Lid on/off Volume: 1000 litres Diameter: 920 mm Height Cyl: 1500 mm Total Height: 1910 mm Feet Quantity: 3 Surcharges/unit: (Prices upon request) Butterfly Valve DN 50 Clap Lid Crane Support for Ladder Connecting Pipe for Clap Size 37 with Butterfly Valve DN 40=Clea ...

Cat. No. 11-3600-3 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 1000 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 1000 litres on the top: 800 litres Height on the ground: 2085 mm Height on the top: 1550 mm Total height: 3635 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobil ...

Cat. No. 11-3600-4 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 500 litres Height on the ground: 1835 mm Height on the top: 1050 mm Total height: 2885 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-5 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 600 litres Height on the ground: 1835 mm Height on the top: 1200 mm Total height: 3035 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-6 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 800 litres Height on the ground: 1835 mm Height on the top: 1550 mm Total height: 3385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-7 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 600 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 600 litres on the top: 500 litres Height on the ground: 1485 mm Height on the top: 1050 mm Total height: 2535 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-8 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 600 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 600 litres on the top: 600 litres Height on the ground: 1485 mm Height on the top: 1200 mm Total height: 2685 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-9 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 500 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 500 litres on the top: 500 litres Height on the ground: 1335 mm Height on the top: 1050 mm Total height: 2385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat-Nr. 10-2460 in a very good condition Material: V2A - AISI 304, 1.4301 Surface: inside: IIID, outside marbled Upper Body: with Manhole Lid DN 400 with 4 Screws with Clamp Closure, with Fermentation Lock DN 50, with 4 Eye Hooks Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height: 1570 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

to the storage of custom water / fire-fighting water. the container is used, emptied inside and cleaned expertly. he owns a manhole DN 600 with cathedral lid, two angschweisste feet and will provide outside completely with a new bitumen painting. L = approx. 10.70 m / D = 2.50 m / weight approx. 9.0 to. / ex works, freely charged. for the use as a fire-fighting water tank konnen we the container completely equip with a fire brigade suction connection, consisting of: -1 Stck. Suction management with A-firm coupling to German Institute for Standardization 14319 with special fastener for Feuerwehr-Dreikantschluessel - 1 Stck. Bleeder tube with bonnet - 1 Stck. Bearing pipe with bearing stick for measurement of the filling state - 1 Stck. Cathedral lid with screws and poetry. the suction management can be used as a filling and withdrawal pipe. the components are prep ...

Stirring tank 150 l. in stainless steel design, for feeding and/or mixing liquids and solids before grinding, spraying etc., incl. 3,6 kW gear drive , lid with inspection glass, agitator with propeller (200 mm ?, tool coated with oxide ceramics). In very good condition.

Sterile tank electropolished 18,100 litres, double coat, Interior Product area: 4 bar pressure-resistant / vacuum Material: 1.4435 / V4A / 316L Jacket: 4 bar pressure-resistant Material: 1.4404 / V4A / 316L

System: Used tank Material: PP Length: 2.13 m Height: 2.30 m Width: 1.60 m Volume: approximately 7.83 m m³ Connections: DN 25, DN 50 and DN 80 s photo

Cat.-No. 14-0063 in a very good condition Total Height: 1720 mm Total Length: 3600 mm Diameter: 1600 mm Height Tank Body: 1620 mm Weight: 600 kg • Material: AISI 304, Front Side Marbled, Inside IIID • with Manhole on the front 420 x 320 mm • with Fermentation Lock • with Thread Connection ½ • with Clap NW 40 • with outlet discharge DN 40 with outlet WKG 40 • with Angle Seat Butterfly Valve All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Tank internal dimensions (lxwxh) 700x550x500mm Exterior dimensions (lxwxh) 880x730x750mm Basket dimensions (lxwxh) 640x490x80mm Ultrasound peak power 8000W 40 kHz operating frequency (others available) max. capacity 175Liter Heater 6KW 400V/50 Hz Clip on lid or hinged cover possible also available rinsing baths or dripping plates.

Cat.-No. 16-00129 Measurement and Weight: Total Height: 2.200 mm Total length approx. 5.720 mm Diameter approx. 1.700 mm Weight approx. 1.500 kg Operating pressure: 8 bar, Test pressure: 10,4 bar Operating pressure doubles jacket: 3 bar Wall thickness: Bottom 7 mm, Jacket 5 mm Container with torispherical. On upper bottom: 2 crane eyelets 1 flange connection NW 20 for vent Front dished bottom 1 manhole swiveling 350 x 450 mm 1 sleeve ¾” 1 flange connection NW 20 for safety fitting 1 flange connection NW 20 for level indicator 1 flange connection NW 50 for clear outlet At the bottom: 1 flange connection NW 50 as outlet Container feet are about 3% slope to drain. All prices are valid Ex-Works, excl. VAT The price is for one tank. Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg  ...

Beer tank, single-walled, isolated with fittings Manufacturer: Wilhelm Schmidding Type: transport container Year of construction: 1977 Capacity: 22,500 litres Pressure: 3 bar Material: 1.4541 Temperature: 20 ° C Dimensions: Diameter: 1,750 mm Length: 9,850 mm Container has been cleaned already. In very good condition!

Tank without aseptic valve node 9000l

Glue tank with rollers for sanding machine IMA

Storage tank: -Contents: approx. 11'000 litres -Width: approx. 1'500 mm -Length: approx. 2'650 mm -Height: approx. 3'300 mm Collecting container 100% : -Width: approx 2'150 mm -Length: approx. 3'700 mm -Height: approx. 1'500 mm

New 10 000 l water tank with base (was only filled with water!); as good as new

Stationaerer gas tank for heating system 2,800 litres Remaining capacity approx. 1,000 litres With foundation slab Last Pruefung faellig 2010 Free loaded truck Special price LPIque Propane LPG Vaillant White Head

MÖSCHLE Storage tanks outside marbled for wine, water, fruit juice, schnapps 11.500 liter UNI-NIED Measurement and Weight: Total Height: 3430 mm Length: 2350 mm Width: 1800 mm Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With sloping bottom With filler pipe NW50 Cylinder tank: With 1 manhole 440 x 340 mm With 1 holder With connection NW25 For level indicator with bar and scale With connection for zapf clape gr. 37 With connection DN 15 for sample valve Lower bottom: With flat bottom With outlet pipe connection NW50

Storage tanks, steel tanks without pressure 4,000l Tannk No. 100, 101, 103 UNI-OFF Tanks no. 100, 101, 103 UNI-OFF Measurement and Weight: Total Height: 3000 mm Cyl. Height: 2000 mm Diameter inside: 1490 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 3 feet height adjustable - with rest outlet DN 65

Storage tanks, steel tanks without pressure 5,000l Tanks no. 42, 43, 44, 45, 46, 47, 48, 49, 51 UNI-OFF Measurement and Weight: Total Height: 3500 mm Cyl. Height: 2550 mm Diameter inside: 1480 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 3 feet height adjustable - with rest outlet DN 65 (angle seat valve)

Storage tanks, steel tanks without pressure 6,000l Tannk No. 56, 57, 58, 59 UNI-OFF Dimensions and weight: Ges. Height: 4120 mm Zyl. Height: 3100 mm Inner diameter: 1480 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with clear drain DN 40 (inclined seat valve) - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 4 feet - with residual outlet DN 65 (inclined seat valve)

Storage tanks, steel tanks without pressure 8,000l Tannk No. 28, 29, 30, 31 UNI-OFF Dimensions and weight: Ges. Height: 3300 mm Zyl. Height: 2230 mm Inner diameter: 2000 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with clear drain DN 40 (inclined seat valve) - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 4 feet - with residual outlet DN 65 (inclined seat valve)

Storage tanks, steel tanks without pressure 10,000l Tanks no. 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41 UNI-OFF Measurement and Weight: Total Height: 3900 mm Cyl. Height: 2900 mm Diameter inside: 1980 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 4 feet height adjustable - with rest outlet DN 65 (angle seat valve)

Storage tanks, steel tanks without pressure 15,000l Tanks no. 52, 53, 54 UNI-OFF Measurement and Weight: Total Height: 4120 mm Cyl. Height: 2950 mm Diameter inside: 2380 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 4 feet height adjustable - with rest outlet DN 65 (angle seat valve)

Storage tanks, steel tanks without pressure 20,000l Tannk Nos. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 UNI-OFF Dimensions and weight: Ges. Height: 3830 mm Zyl. Height: 2800 mm Inner diameter: 2780 mm Built: 1973 Surface: Lining: Munkadur - food-safe colour inspection Outside: painted Material: Steel Topsoil: - with curved bottom - with dragged down sheet pipe DN 32 Tank cylinder: - with manhole oval with bracket and bracket - with tasting tap DN 20 - with bracket at the top side - with flange - with level indicator with bar and scale Underbody: - with curved bottom - height-adjustable with 5 feet - with residual outlet DN 65 (inclined seat valve)

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Utzschneider Type: Schokoladentank / chocolate tank Volume ca. 4000kg – 6000Liter electrical: 400V dimensions: Höhe ohne Motor ca. 2400 mm / high without engine Space requirement: ca. Durchmesser 2300 mm different: Engine dismantled for transport, double jacked for heating with steam or water We offer this machine in as-is where-is condition

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Collmann Type: stainless steel tank Volume ca. 3600 l dimensions: diameter 1700 mm length 1600mm different: 2 sight glasses opening 530mm x 1080mm 4 standing feet bottom outlet We offer this machine in as-is where-is condition

Storage tanks made of V2A without pressure standing, on a stand filled with concrete Content: 30,000 litres Available: 4 pieces UNI-SCHLI-FOR B. No. 18-086 A-D GL Dimensions and weight: Diameter approx. 2,500 mm Zyl. Height approx. 6,000 mm Total height with feet approx. 6,800 mm Material: Stainless steel 1.4301 Wall thicknesses: underbody 4 mm, rest 3 mm Container with lower sloping floor with 3% slope to the outlet and upper cone bottom Topsoil: 2 crane eyelets 2 Threaded nozzles DN 50 1 elbow NW 40 cut off 1 nipples 1" 1 nipples 1/2" Tank cylinder: 1 manhole 450 x 350 mm swivel 7 1/2 Underbody: 1 outlet nozzle NW 50 otherwise according to photos The containers additionally have 1 slanted seat flange NW 150 for agitator without agitator A container has a slight vacuum damage at the top

Storage tanks made of V2A without pressure standing, on a stand filled with concrete Content: 30,000 litres UNI-SCHLI-FOR B. No. 18-087 A-F GL Dimensions and weight: Diameter approx. 2,500 mm Zyl. Height approx. 6,000 mm Total height with feet approx. 6,800 mm Material: Stainless steel 1.4301 Wall thicknesses: underbody 4 mm, rest 3 mm Container with lower sloping floor with 3% slope to the outlet and upper cone bottom Topsoil: 3 crane eyelets 2 Threaded nozzles DN 50 1 nipples 3" Tank cylinder: 1 manhole 450 x 350 mm swivel 7 1/2 Underbody: 1 outlet nozzle NW 50 otherwise according to photos Three of the containers have an additional 1 agitator flange DN 200 A container has a slight vacuum damage at the top

Manufacturer: Hinke Model: ATS Sudmo Capacity: 6400 l Pressure tank up to 5 bar

Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

Stock# UG6244 Second hand, little used, vertical storage tank designed in PP by Polplast Gliwice (PL) with working volume 30000 l. Diameter 300 cm x Height 500 cm.