We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,929 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Coolant pump, emulsion pump, submersible pump, with tank VEM KRZ 1V - 25/160 Immersion depth: 160 mm Pump base: Ø 100 mm Flange diameter: Ø 130 mm Q: 25 l/min h: 1,1,6 m Motor: 130 W 2900 rpm 220 / 380 V 3AC 50 Hz IP44 tank with oil / dirt separation tank capacity: approx. 15 liters used, tested ! Dimensions: 440 x 340 x 450 mm
used
Emulsion pump, coolant pump, with tank CET BRNO 3COA2-22 PO Immersion depth: 220 mm Pump base: 100 mm Flange: 130 mm Q: 25,0 l / min ( 0.42 l/s ) P: 40 kPa ( 0.4 bar ) motor: 220 - 254 / 380 - 440 V 3AC 50 Hz 0.4 - 0.5 / 0.23 - 0.29 A tank with oil and dirt separator usable Tank volume: approx. 30 l used, tested ! Dimensions: 460 x 410 x 430 mm
used
Emulsion pump, coolant pump, with tank MANSFELD MHR-1 Pump: MEZ BRNO 2COA2-22 PO Immersion depth: 220 mm Pump base: 100 mm Flange: 130 mm Q: 63 l / min ( 1,1,min 05 l/s ) P: 0.16 atp ( 0.16 bar ) Engine: 0.16 kW ( 160 watts ) 220 - 254 / 380 - 440 V 3AC 50 Hz tank with oil separator and dirt filter usable tank volume: approx. 6.3 l used, tested ! Dimensions: 440 x 160 x 410 mm
used
Vacuum tank, vacuum tank, vacuum tank, vertical F.W. HEIDER GmbH Type VB Capacity: 1000 liters permissible Operating overpressure: - 0.9 bar permissible Operating temperature: 0 - +50 °C connections ( boiler ): 2x 2 ( inches ), 2x 11/4 ( inches ), 2x 1/2 ( inches ) connections ( top ): 1x 1 ( inches ) connections ( bottom ): 1x 2 ( inches ) Material: steel, galvanized used, tested ! Dimensions: 900 x 850 x 2300 mm
used
Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg
used
Hydraulic oil tank, hydraulic oil tank, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Add-on parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 Kg
used
Hose reel, hose reel, tank hose reel, wall reel, refueling hose, chemical hose, mineral oil hose, high-pressure hose, tank truck hose -Manufacturer: Gelbring / Tonsing, HD tank hose on reel -Type: NBR-1 DIN EN 1761 / EI 1529 / VG 95955 -Hose length: approx. 240 m -Hose: Ø inside 50 mm (2) outside 66 mm -Reel: hydraulically driven -Dimensions: 1750/1590/H1360 mm -Weight: 780 kg
used
Hydraulic oil tank -Tank height: 200 mm -Tank capacity: 3.6 L. -Dimensions: 190/350/H290 mm -Weight: 5 kg
used
Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg
used
Diesel tank system, diesel tank, gas station, fuel tank system -for: diesel, heating oil -Mobile -with: electric motor pump -Delivery rate: approx. 30 l/min -Liter display clock -Content: 800 liters -Dimensions: 1500/800/H1480 mm -Empty weight: 310 kg
used
This is 5.000 liter Stainless Steel storage tank with attached ladder. The ladder will be taken out for transportation. Unit Specifications - Tank Capacity 5.000liters - Top inlets - Bottom Outlets - Tank Dimensions 1800Diameter X 2000mm Height - Total Dimensions 2550mm X 2000mm X 2700mm (L x W x H) including 750mm ladderâs length
used
Water break tank / pressure booster set Grunfos Well-functioning break tank pressure booster set Pressure adjustable, max 4 bar 1 liter per second Tank equipped with supply float. Stainless steel pump Price: €550 ex VAT Duijvelaar, Stabu, Wildkamp, Suevia
used
Used 12250 Litre / 2695 Gallon Vertical Stainless Steel Storage Tank / Vessel - Stock Ref: CB3193 Manufacturer: Morton Machine Works Maup 80psi at 250 deg.F MDMT 2deg F at 50psi Serial No: 95-1280-16 Lining: Fivoroclad lining system 3mm. PTFE NGC No: 1591B2 TARE WT 3500 1bs Connections 1 x 18" Bolted Acess Flange 3 x 6" flange inlets 1 x 4" flange inlet Tank thickness: 11.4mm Top dish 8.3-8.5mm shell 11.7mm Base dish Tank supported on 4-off tube legs with foot plates.
used
Used 32730 Litre / 200 barrel / 327 hectolitre working Stainless Steel Fermentation Tank / Vessel. Manufacturer:BRIGGS Vessel SWP 20 psi / TP 33 psi Jacket SWP 30 psi / TP 75 psi Connections: TOP 1 x 18" Top set c/w 1 x Anti -vacuum 1 x Pressure Relief 1 x 1½" Inlet 1 x CIP spray ball 1 x Sight glass SIDE 1 x Sample 1 x Temp probes 4 x 1½"BSP jacket connections BASE 2 x Cone Jacket connections 1 x Cone manway with outlet Tank shell & base insulated. Tank has a mild steel support ring / skirt.
used
Used 2500 Litre / 550 Gallon Stainless Steel Insulated Gate Mixing Tank / Vessel - Stock Ref: CB2371 Manufacturer: no nameplate detail Tank has a gate style mixer (3” s/s tube outer with twisted flat bar cross sections) RAYNERI Gearbox Type: DYN.O.US Date: 5-81 T/M: 16 SEW Motor Type: SA70DT80N4 0.75kW 1400 / 16 RPM Connections TOP 1 x Flip Lid access 1 x Mixer entry (top Centre) 1 x 2” SMS male with blank 1 x 30mm old shaft access 2 x 1½” socket 2 x 1½” SMS male 1 x Probe connection unknown 1 x 3” SMS female outlet Insulated approx. 60mm with riveted sheet cladding. Tank supported on 4-off conical legs.
used
Used 6540 Litre / 1440 Gallon / 40 Barrel, Vertical, Stainless Steel, Brewery Storage Tank / Vessel Manufacturer: Stainless Steel Plant Ltd Tank pressure: 30PSI (work) / 45PSI (test) Connections: TOP 1 x 8" inlet pad 1 x 2" inlet SIDE 1 x side entry internal/external manway BASE 1 x 3" outlet pad Tank has provision for 6-off support legs
used
This is a 3000 liter hammered Stainless Steel pressure tank. This vessel is equipped with an inside reverse tank inside. Unit Specifications: - Hammered 3000 liters Stainless Steel Tank - Double Jacket inside - Used for gases under pressure - Total dimensions Diameter 1350mm X 2200 Height
used
Tank for pharmaceutical formulation PIERRE GUERIN Stainless steel 316L-1.4435 (low ferrite rate) 1395 liters - useful volume 1200L Air-conditioned, double walled Tank equipped with load cells Magnetic stirring at the bottom of the tank Equipped for CIP/SIP -1/+3.5 bar Internal diameter = 1140mm Year 2007 Complete technical documentation
used
Used 2870 Litre / 631 Gallon Stainless Steel Insulated Jacketed Mixing Tank / Vessel - Stock Ref: CB6285 Manufacturer: No Nameplate Details NOTE: Damaged cladding at back of vessel. Connections TOP 1 x Top Manway 1 x Bridge Mounted Mixer 1 x 2½” RJT male inlet 2 x 30.1mm SMS male with sprayhead SIDE 1 x ½! Socket with Plug 2 x ¾” Nipple 1 x 2” RJT Female BASE 1 x 3” to 2” Female Special Tank insulated and clad approx. ¾ of body only covering jacketed area. Stainless steel cladding is damaged at back of vessel / opposite side to top manway. Tank supported on 4-off Diameter 60mm S/S tube legs complete with bracing.
used
Used 20000 Litre / 4400 Gallon Stainless Steel 316 Mixing Tank / Vessel - Stock Ref: CB5881 Manufacturer: TBC Tank includes: • Top Access Manway • X6 top dish inlets • X1 vent • Top Centre Mixer unit on a fabricated cone with mounting pad (detail TBC) • Base cone centre Outlet Tank is supported on 3-off S/S cone legs with adjustable footplates
used
Used 10000 litre / 2200 gallon Vertical Stainless Steel Storage Tank / Vessel - Stock Ref: CB3939 Manufacturer:Matthew Hall Eng Connections: TOP 1 x Mixer mount / entry (no drive motor) 1 x Square Manway 700 x 800 1 x 2" BSP Nipple Inlet 1 x 3" Flange Inlet SIDE 5 x 1½" Flange Outlet BASE 1 x 2" Flange Outlet Tank has 4-off internal baffle plates / a mixer shat & blades but no drive motor Flat base tank supported on 2-off channels
used
Used 10000 litre / 2200 gallon Vertical Stainless Steel Storage Tank / Vessel - Stock Ref: CB3939 Manufacturer:Matthew Hall Eng Connections: TOP 1 x Mixer mount / entry (no drive motor) 1 x Square Manway 700 x 800 1 x 2" BSP Nipple Inlet 1 x 3" Flange Inlet SIDE 5 x 1½" Flange Outlet BASE 1 x 2" Flange Outlet Tank has 4-off internal baffle plates / a mixer shat & blades but no drive motor Flat base tank supported on 2-off channels
used
Used 5000 litre / 1100 gallon / 30 Barrel, Vertical Stainless steel Insulated Storage Tank / Vessel Manufacturer: QUINN ENG. LTD. REF:G-3512XX DP: 1.1Bar g @ Top. DT: 200º C HYD Test:2.16 Bar BS5500 CAT3 Connections: TOP (Topset Flange) 1 x 4" AV on 4" Pad 1 x 3" PR on a 4" Pad 1 x 2" ISS Male 1 x 2" BSP Socket 1 x 4" Pad. SIDE 1 x 1½" BSP Socket, Sample BASE 1 x 1½" ISS Male, Temp Probe 1 x 3" ISS Male Tank Shell & Base / Legs have 100mm Insulation with Riveted Stainless Steel Sheet Cladding. Tank supported on 3-Off, 4" S/S Tube Legs with Adjustable Feet.
used
Used 5000 litre / 1100 gallon / 30 Barrel, Vertical Stainless steel Insulated Storage Tank / Vessel Manufacturer: QUINN ENG. LTD. REF:G-3512XX DP: 1.1Bar g @ Top. DT: 200º C HYD Test:2.16 Bar BS5500 CAT3 Connections: TOP (Topset Flange) 1 x 4" AV on 4" Pad 1 x 3" PR on a 4" Pad 1 x 2" ISS Male 1 x 2" BSP Socket 1 x 4" Pad. SIDE 1 x 1½" BSP Socket, Sample BASE 1 x 1½" ISS Male, Temp Probe 1 x 3" ISS Male Tank Shell & Base / Legs have 100mm Insulation with Riveted Stainless Steel Sheet Cladding. Tank supported on 3-Off, 4" S/S Tube Legs with Adjustable Feet.
used
Used 1050 Litre, 231 Gallon, Vertical, 304 Stainless Steel Flat Top Cone Base Mixing Tank / Vessel - Stock ref: CB4291 Tank is supported on 4-Off fabricated S/S legs complete with RSA bolt-down brackets on each leg. Manufacturer: Briggs Serial:CN/8468 Date:April 95 Shell Max DT 20º Atmospheric Connections: TOP 1 : 350x150 Lockable top access. 1 : 3" RJT Male. 1 : 8" Flange, Inlet. 1 : 1" BSP Socket, Inlet. 1 x Mixer inlet Mixer Detail: Top Entry, 5kW, 950rpm motor with a single, flat bar, belt driven propeller. SIDE 1 : 8" Tangential Flange, Inlet. 1 : 8" Pad Special, Sight. BASE 1 : 1" BSP Socket, Level. 1 : 6" Flange, Outlet. Tank supported on 4-Off, stainless steel, 3" tube legs complete with diagonal bracing.
used
Used 7360 Litre / 1619 Gallon (working) Vertical, Stainless Steel, Jacketed, Yeast, Tank / Vessel Manufacturer: ANTON PETERSON & HENIUS (COPENHAGEN) Year: 1978 Vol: 7360L TANK & STEAM JACKET 2bar Work / 3.35bar test / 133°C work COOLING JACKET 2bar Work / 3 bar test / 20°C work Connection TOP 1 x Bolted Top Manway with Male Inlet 2 x 3” sight Glasses SIDE 1 x 1½” SMS Female Inlet 1 x 1” SMS Female Inlet 6 x 1” ISS Male, Jacket Inlets 1 x 1” Nipple, Pocket 2 x 1½” SMS Male, Jacket 1 x 1” socket 1 x 1½” Flange, Inlet BASE 1 x 1” Nipple 1 x 2” Pad Outlet Tank supported on 3-Off 4” S/S tube Legs with Adjustable feet.
used
Used 7360 Litre / 1619 Gallon (working) Vertical, Stainless Steel, Jacketed, Yeast, Tank / Vessel Manufacturer: ANTON PETERSON & HENIUS (COPENHAGEN) Year: 1978 Vol: 7360L TANK & STEAM JACKET 2bar Work / 3.35bar test / 133°C work COOLING JACKET 2bar Work / 3 bar test / 20°C work Connection TOP 1 x Bolted Top Manway with Male Inlet 2 x 3” sight Glasses SIDE 1 x 1½” SMS Female Inlet 1 x 1” SMS Female Inlet 6 x 1” ISS Male, Jacket Inlets 1 x 1” Nipple, Pocket 2 x 1½” SMS Male, Jacket 1 x 1” socket 1 x 1½” Flange, Inlet BASE 1 x 1” Nipple 1 x 2” Pad Outlet Tank supported on 3-Off 4” S/S tube Legs with Adjustable feet.
used
Used 18800 Litre / 4136 Gallon Stainless Steel Pressure Tank / Vessel - Stock Ref: CB5155 Manufacturer: BURNETT & ROLFE Tank Pressure: Work 30PSI Test 45PSI Connections TOP 1 x 4” Pad Inlet 1 x 2” Pad Inlet (Top Centre) 1 x 2” Flange Inlet 2 x 2” RJT Male Inlets 1 x 3” RJT Male Inlet SIDE 1 x Side Manway (510x410mm) BASE 1 x 1” Nipple on elbow, (Level tube) 1 x 2½” Flange on elbow Tank supported on Mild Steel skirt Base with a 600x600 Access Hole.
used
Used 18800 Litre / 4136 Gallon Stainless Steel Pressure Tank / Vessel - Stock Ref: CB5155 Manufacturer: BURNETT & ROLFE Tank Pressure: Work 30PSI Test 45PSI Connections TOP 1 x 4” Pad Inlet 1 x 2” Pad Inlet (Top Centre) 1 x 2” Flange Inlet 2 x 2” RJT Male Inlets 1 x 3” RJT Male Inlet SIDE 1 x Side Manway (510x410mm) BASE 1 x 1” Nipple on elbow, (Level tube) 1 x 2½” Flange on elbow Tank supported on Mild Steel skirt Base with a 600x600 Access Hole.
used
Used 94 Litre , 21 Gallon Dissolving stainless steel 304 tank / vessel - Stock Ref: CB4823 Manufacturer: No Nameplate. TOP 1 x 6” Cut Tube Inlet SIDE 1 x Hinged Lid Access with resting platform. BASE 1 x 10” Flange outlet Tank has internal Grille. Tank is supported on 3-Off 70x70mm box legs with bolt-down foot plates.
used
Used 25Brl / 4087 Litre / 900 Gallon Horizontal Stainless Steel tank / vessel with internal Pipe Coil – Stock Ref: CB5073 Manufacturer: APV Date: 10/01/55 Tank Pressure Details: Work 45LBS Test 90LBS FULL VAC. Connections 1 x Side Manway (510x410mm) 1 x 2½” Pad Inlet 1 x 4” Sch tube elbow (Rough Cut), Inlet 2 x 2½” RJT Male, CIP Inlets 1 x 4” Sight Pad 2 x 1” Sockets ( Hi /Lo Level) 1 x Temperature Pocket with Nipple Connection. 2 x 2” Flange, Inlet/Outlet for Internal Heating Pipework/Coil. 1 x ¾” Socket, Sample Point 1 x 6” Sch Tube (Rough Cut) Outlet 1 x 3” RJT Female on Pad, Drain. Tank has 2-Off support Ring around its circumference. Internal Heating pipe fitted Vessel is supported on 4-Off Mild Steel Legs & Footplates which are connected to the previously mentioned support rings.
used
Used 9000 Litre / 1980 Gallon / 55 Barrel (Gross), Vertical, Stainless Steel 316, Jacketed and Insulated Storage Tank / Vessel Manufacturer: No Nameplate or Jacket Details Fittings: TOP 1 x 2” cut tube, Inlet 2 x 6” Sight glasses 1 x 3” centre pad 1 x 4” Flange overflow with 2” male in neck SIDE 4 x 1” Flange with socket bleed Jacket connections 1 x 1” socket, Pocket BASE 2 x 1” Flange with socket bleed, Jacket connections 1 x Ø450 Flange outlet / Access Tank is Insulated shell / base with riveted S/S cladding. Support to tank provided by 4-Off 4” S/S tube legs with bracing to centre outlet neck.
used
Used 10700 litre / 2354 gallon (Gross) Vertical Stainless Steel Flat Sloping Base Mixing Storage Tank / Vessel - Stock Ref: CB3310D Manufacturer: VAAHTO (Finland) Connections: TOP 1 x (500x400) Top Access with Hinged Lid 1 x 4” Lap Flange 1 x Top Centre Mixer Entry Point ( No Mixer Currently fitted) SIDE 1 x 4” Lap Flange on 90° elbow, Overflow 1 x 3” Pad, inlet 1 x 2” Ball Valve with cut tube in Outlet BASE 1 x 3” Cut Tube ‘Slip-Fit’ Outlet Mild Steel Mixer Support (box section) bridge supported on stainless steel uprights from tank. Tank is supported on a flat sloping base.
used
Used 94 Litre , 21 Gallon Dissolving stainless steel 304 tank / vessel - Stock Ref: CB4823 Manufacturer: No Nameplate. TOP 1 x 6” Cut Tube Inlet SIDE 1 x Hinged Lid Access with resting platform. BASE 1 x 10” Flange outlet Tank has internal Grille. Tank is supported on 3-Off 70x70mm box legs with bolt-down foot plates.
used
Used 25Brl / 4087 Litre / 900 Gallon Horizontal Stainless Steel tank / vessel with internal Pipe Coil – Stock Ref: CB5073 Manufacturer: APV Date: 10/01/55 Tank Pressure Details: Work 45LBS Test 90LBS FULL VAC. Connections 1 x Side Manway (510x410mm) 1 x 2½” Pad Inlet 1 x 4” Sch tube elbow (Rough Cut), Inlet 2 x 2½” RJT Male, CIP Inlets 1 x 4” Sight Pad 2 x 1” Sockets ( Hi /Lo Level) 1 x Temperature Pocket with Nipple Connection. 2 x 2” Flange, Inlet/Outlet for Internal Heating Pipework/Coil. 1 x ¾” Socket, Sample Point 1 x 6” Sch Tube (Rough Cut) Outlet 1 x 3” RJT Female on Pad, Drain. Tank has 2-Off support Ring around its circumference. Internal Heating pipe fitted Vessel is supported on 4-Off Mild Steel Legs & Footplates which are connected to the previously mentioned support rings.
used
Used 5900 Litre / 1300 Gallon (Gross), Vertical Stainless Steel 316 Storage Tank With Flat Sloping Base Manufacturer: No Nameplate Details Connections TOP 1 x 390x350 Top Access Hatch 2 x 1½” Lap Flange Inlets 1 x 3” Lap Flange Inlet SIDE 1 x 2” Lap Flange on 90° elbow, Overflow 2 x Mowberry style level pads 2 x 1” Socket 1 x 4” Lap Flange 1 x 4” Lap Flange, Mild steel ring 1 x Open tube entering tank with external socket 1 x 3” Pad 1 x 1½” Socket 1 x 1” tube with welded valve half flange BASE 1 x 2½” Slipper Fitting tube, with welded ball Valve & welded 90° elbow Tank is supported on a Flat Sloping base (base is Not Knuckled)
used
Used 24300 Litre 5346 Gallon Vertical Stainless Steel Jacketed And Insulated Tank. Manufacturer: Stone & Webster Eng. Equip. No.: BBT 25 Order.: 7171M.29A Date: 1. 5. 72 BS.1515.: Part II Design Pressure: 2.24bar @ 65°C Hydro Test Pressure: 2.61bar W.J.F. Head: 75% / shell 75% Total Weight Empty: 2900 KG Connections Top 1 x 4” Tri-clamp ferrule with 2” RJT male branch, top centre inlet 1 x Probe boss socket on a pad 1 x 3” Pad with blank and sandwich probe connection Side 1 x Oval side manway 510 x 410mm 2 x Jacket flange connections with adaptor terminating in 1” RJT males 1 x Sample point Base 1 x 3” Tri-clamp ferrule, outlet Tank is fully insulated approx. 100mm on shell, and clad in profile stainless steel riveted sheet on body, with GRP cladding on dishes. Tank supported on 6-off 6" painted steel tube legs with f ...
used
Used 9300 Litres 2046 Gallon Vertical Stainless Steel Tank / Vessel Manufacturer: APV Burnett & Rolfe Date: 07-11-84 BR No.: 84020 / 35 Tank Pressure: 30PSIG Working 45PSIG Test Connections Top 1 x 1” RJT male top centre 1 x Eurogauage level socket 1 x Weighted pressure relief with shroud 1 x Weighted anti-vac with shroud 1 x 7” Sight glass port 1 x 2” RJT male Inlet Side 1 x Sight / level glass panel 1 x Oval manway, 510 x 410mm 1 x 4” RJT male, inlet Base 1 x Eurogauage level socket 2 x 4” RJT male outlets Tank supported on 4-off 4” stainless steel tube legs complete with adjustable pin feet.
used
Used 10700 litre / 2354 gallon (Gross) Vertical Stainless Steel Flat Sloping Base Mixing Storage Tank / Vessel - Stock Ref: CB3310B Manufacturer: VAAHTO (Finland) Connections: TOP 1 x (500x400) Top Access with Hinged Lid 1 x 4” Lap Flange 1 x Top Centre Mixer Entry Point ( No Mixer Currently fitted) SIDE 1 x 4” Lap Flange on 90° elbow, Overflow 1 x 3” Pad, inlet 1 x 2” Ball Valve with cut tube in Outlet BASE 1 x 3” Cut Tube ‘Slip-Fit’ Outlet Mild Steel Mixer Support (box section) bridge supported on stainless steel uprights from tank. Tank is supported on a flat sloping base.
used
Used 10700 litre / 2354 gallon (Gross) Vertical Stainless Steel Flat Sloping Base Mixing Storage Tank / Vessel - Stock Ref: CB3310A Manufacturer: VAAHTO (Finland) Connections: TOP 1 x (500x400) Top Access with Hinged Lid 1 x 4” Lap Flange 1 x Top Centre Mixer Entry Point ( No Mixer Currently fitted) SIDE 1 x 4” Lap Flange on 90° elbow, Overflow 1 x 3” Pad, inlet 1 x 2” Ball Valve with cut tube in Outlet BASE 1 x 3” Cut Tube ‘Slip-Fit’ Outlet Mild Steel Mixer Support (box section) bridge supported on stainless steel uprights from tank. Tank is supported on a flat sloping base.
used
Used 1400 Litre / 308 Gallon Gross Stainless Steel 316 Mixing Tank / Vessel - Stock Ref: CB3309 Manufacturer: No Nameplate Details Connections: TOP 1 x 890x560 Hopper Access with Lid & safety grille 1 x Top Centre Mixer Entry (Mild Steel Bridge Mounted 1 x ½” Open Tube Inlet 1 x 3” Open Tube Inlet 2 x Ø260 Open Tube Inlets, (Angled entry) SIDE 2 x 1½” Lap Flange, Tangential Inlets with Internal Pipework 2 x 1" sockets BASE 1 x 2½” Lap Flange Outlet Mixer Detail Manufacturer: KUMERA OY Type: IIV TM-1120 Year: 1997 U: 3.55/1 Tank Supported by Mild Steel Shoulders welded to tank, and braced with a 65x65mm RSA ring.
used
Used 1400 Litre / 308 Gallon Gross Stainless Steel 316 Mixing Tank / Vessel - Stock Ref: CB3308 Manufacturer: ENZO GUTZETI No. 302/86 1.2m3 312.86kg Connections: TOP 1 x 890x560 Hopper Access with Lid & safety grille 1 x Top Centre Mixer Entry (Mild Steel Bridge Mounting) 1 x ½” Open Tube Inlet 1 x 3” Open Tube Inlet 2 x Ø260 Open Tube Inlets, (Angled entry) SIDE 2 x 1½” Lap Flange, Tangential Inlets with Internal Pipework 2 x 1" sockets BASE 1 x 2½” Lap Flange Outlet Mixer Detail No Mixer Unit Shaft or blades Tank Supported by Stainless Steel Shoulders welded to tank, and braced with a fabricated S/S 65x65mm angle ring.
used
Used 5700 Litre 1254 Gallon Vertical Stainless Steel, Jacketed, Insulated And Welded Clad Tank. Manufacturer: RMDG Robert Morton DG Ltd Contract: C1881 Date: June 1982 Vessel Work: 15 PSIG Test: 21 PSIG Jacket Pressure Work: 58 PSIG Test: 72 PSIG Connections Top 1 x ø400 Manway 1 x Weighted anti-vac with shroud 1 x Unknown welded special, TBC 1 x 4” Pad top centre Side 2 x 1” Flange, jacket connections 1 x Sample tap 2 x Probe boss sockets 1 x 1” RJT female Base 1 x 1” Flange, jacket connection 1 x 1” Nipple, jacket connection 1 x 3” Flange outlet with 1” RJT female branch Tank is insulated approx. 100mm and clad in fully welded stainless steel sheet on base and shell only. Tank is supported on 3-off 4” stainless steel tube legs that have been clean.
used
Used 20000 Litre / 4400 Gallon Stainless Steel 316 Insulated Mixing Tank / Vessel - Stock Ref: CB6333 Manufacturer: KELLS STAINLESS LTD Model: Storage Capacity: 20,000Litres Date: 01-98 Material: S/S316 Serial:1198-2 Connections TOP 1 x Shrouded Anti-vac 1 x Shrouded Pressure Relief 2 x 3” ISS male with Spray-ball Lance SIDE 1 x Oval Manway 510x410 with Sample point 1 x Keofit sample tap 1 x APV Side entry mixer. Pad Mounted BASE 1 x 4” ISS male with Butterly valve, Inlet / Outlet Mixer Detail: Manufacturer: APV Model: 1V RPM: 260 Motor: Brooke Hanson 2.2kW / 1415rpm Tank is fully Insulated, approx. 80mm with Cladding. Top: S/S knuckled cone Shell: Plastic coated Profile cladding Base: Plastic coated flat sheet cladding Tank is supported on 4-off 8” S/S tube Legs.
used
Used 27000 Litre 5940 gallon horizontal Stainless Steel insulated tank Manufacturer: BURNETT & ROLFE CONNECTIONS: TOP: 1 x 4” RJT male 2 x 3” RJT male 1 x shrouded vent SIDE: 2 x sight ports 1 x oval side manway (500x400mm) 1 x probe special BASE 1 x 3” RJT male Sump outlet Tank is fully insulated approx. 50mm with fullu welded s/s cladding. Tank supported on 6-off stainless steel legs with adjustable pin feet
used
Used 2- Off Skid Mounted 700 Litre (Gross) Jacketed Scrape side Mixing Tanks / Vessels Complete with shear head Homogeniser - Stock Ref: CB4089 (Note: full Mixer Unit / shaft / blades & Shear head missing from 1 tank.) Manufacturer: O.KRIEGER Model Type: MMU 500 Year: 1980 WO. 4220 Tank Details Jacket Details Vol: 700 / 615Lts 68Lts Work Overpressure: 2bar 4bar Work Temp: 130°C 150°C Insulated and welded cladding covering base and shell. Tanks are skid Mounted on beams with integrated control systems for valve control and lift of top dishes / Mixer with large hydraulic rams either side of each tank. Hydraulic pump / oil reservoir is inside central cabinet of unit. Overall dimensions for Unit is approx: 1.7m x 4.6m x 3m tall.
used
Used 6540 Litre / 1430 Gallon / 40 Barrel, Vertical, Stainless Steel, Insulated Storage Tank / Vessel Manufacturer: Bibbys of Halifax Connections: TOP 2 x 1” SMS Female 1 x 3” RJT Male, Inlet 1 x 4” Anti-Vac, (Incomplete) 1 x 2” Pressure Relief (Incomplete) 1 x 4” Pad with Blind SIDE 1 x Oval Manway 510x410 1 x 1½” socket Special (Probe) 1 x Keofit Sample 1 x Sample Socket ¼” BASE 1 x 1½” socket Special (Probe) 1 x 1” SMS Female 1 x 2” RJT Female Outlet. Tank Insulated approx 80-100mm with riveted Stainless Steel Cladding. Tank supported by 4-Off 6” Stainless Steel tube legs.
used
Used 33000 Litre 7260 Gallon Vertical Stainless Steel 304, Insulated & Clad Storage Tank. Manufacturer: Muera Vessel No.: 388 Test Pressure: 15 PSI Working Pressure: 10 PSI Connections Top 1 x ø450 Manway. Lid comprises of 1 x 4” weighted Antivac 1 x Probe connection 1 x Sandwich connection 1 x 1! Male Union, Inlet 1 x 6” Flange, Inlet top centre 1 x 3” Flange Inlet 1 x 6” Sight glass port 1 x Probe connection – type tbc Side 1 x ø450 Manway with sight port replaced with probe connection 1 x Probe connection – type tbc 1 x Oval manway (510x410mm) 1 x Sample point – hose tail connection 1 x Probe socket 1 x 8” Ex mixer flange Base 1 x Probe connection – type tbc 2 x 3” Pad outlets Tank is insulated approx. 80mm complete with stainless steel sheet cladding all over. Tank is supported on ...
used
Used 6540 Litre / 1430 Gallon / 40 Barrel, Vertical, Stainless Steel, Insulated Storage Tank / Vessel Manufacturer: Bibbys of Halifax Connections: TOP 2 x 1” SMS Female 1 x 3” RJT Male, Inlet 1 x 4” Anti-Vac, (Incomplete) 1 x 2” Pressure Relief (Incomplete) 1 x 4” Pad with Blind SIDE 1 x Oval Manway 510x410 1 x 1½” socket Special (Probe) 1 x Keofit Sample 1 x Sample Socket ¼” BASE 1 x 1½” socket Special (Probe) 1 x 1” SMS Female 1 x 2” RJT Female Outlet. Tank Insulated approx 80-100mm with riveted Stainless Steel Cladding. Tank supported by 4-Off 6” Stainless Steel tube legs.
used
Used 1750 Litres 385 Gallon Vertical Stainless Steel Insulated Tank / Vessel - Stock Ref: CB6514 Round to rectangular cone terminating in a rectangular bolted flange outlet. Manufacturer: RMDG – Robert Morton Contract: C3885 Date: April 86 Connections Top 1 x Manway ø450 1 x 5” Sight glass port 1 x 2” RJT male Inlet 1 x 1½” Flange CIP inlet with spray head 1 x 3” Flange inlet 1 x 4” Flange inlet 1 x 6” Open tube, inlet Base 1 x Bolted rectangular flange outlet (360 x 620 external with a 35mm flange face). Tank insulated approx. 70mm and clad in riveted stainless steel sheet cladding. Tank is supported on 4-off 3” mild steel tube legs with bracing tube and footplates.