tank containers used for sale

The scope of delivery includes: 03x Stacking container, used Manufacturer: SSI Schaefer Material color: hot-dip galvanized overall width: approx. 850 mm (outside-outside) Frame width: approx. 800 mm Usable width: approx. 770 mm total height: approx. 670 mm (floor - OK crane eye) Frame height: approx. 605 mm Usable height: approx. 470 mm Underride height: approx. 105 mm Total depth: approx. 550 mm (outside-outside) Frame depth: approx. 500 mm Usable depth: approx. 490 mm Further technical data on the stacking container: Load: maximum 0.8 t stackable: yes (stacking factor: 1+5) Crane eyelets: 4 pieces Diameter crane eyelets: approx. 36 mm Note: The stacking containers may be bent. Furthermore, these dents, or other have damage. Use: The stacking containers are suitable due to their robustness especially for the workshop or transport. Due to the catchin ...

From the current promotion we offer cheap 20ft first trip containers! Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof plywood panels made of hardwood. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can therefore be easily lifted and implemented without damage by means of forklifts, i.e. no crane is required for lifting. Due to their massive and weather-resistant design and the fact that sea containers are manufactured according to ISO and CSC standards, they are perfectly suited as storage, material or workshop containers and can be sold again, especially after many years of use, almost without any loss of value. TECHNICAL DATA / TECHNICA ...

We rent and sell storage containers, shipping containers, site containers, overseas container, double Office container plants. Offering transport possible - please contact us. Visits by appointment possible. Check our other offers.

Various office containers and storage containers and many more Different sizes! We rent and sell storage containers, sea containers, construction containers, overseas containers, double office container systems. Offer with transport possible - ask us. Example pictures - visit possible by arrangement. Please also take note of our other offers.

In our depot in Freilassing we always have new containers in different colours and finishes in stock. This ensures a short delivery time and the possibility to visit the containers before purchase. CHOOSE YOUR CONTAINER! PrimeQUALITY As a very special service we offer the option to buy a flawless first-trip container. For this purpose, transport damage is professionally repaired and dirt is removed. State New / First trip – with easy traces of usage through one-time sea voyage Color Bottle breakfast RAL 6007 (or subject to availability) TECHNICAL DATA Dimensions outside: (L x W x H) 6,058 x 2,438 x 2,591 mm Dimensions inside: (L x W x H) 5,844 x 2,330 x 2,350 mm Weight: approx. 2.22 t Payload: approx. 28.27 t Facilities CSC Safety Approval Material: CorTen steel, weatherproof Floor: 28mm hardwood, waterproof Doors: 270° opening, 4-fold linkage Coating: insi ...

We sell several 20 foot office and stay containers of different designs at reasonable prices. There are single containers, double containers, triple containers and quadruple containers. The containers are partly equipped with office furniture or cabinets. The location of the containers is Belgium. But we can organise mining and transport. Basic dimensions of the container length approx. 6055 mm, width approx. 2435 mm, height approx. 2350 mm. Price from 1500,- € + VAT depending on the number of units and execution.

18 pcs. Thyssen storage container, stacking container, stainless steel 1.4541, capacity 210 ltr. each 4 fold stackable, weight per container approx. 100 kg. Price indication per pcs.

approx. 150 pieces Transport and stacking container E, large containers / metal containers - used - : Price per piece for complete acceptance (priority): 109.-€ (net), ex location! Manufacturer: SSI Schaefer Type: unknown, could be Type 189 K Year of construction: unknown Dimensions: approx. Length: approx. 98cm Width: approx. 83cm Height: approx. 91cm with crane eyelets, stackable with on one side of a half-height flap payload: 1.500kg Underride height: 105mm Condition: good Available: as of now Location: A-4690 Schwanenstadt

Tilting container, tipping container for forklifts Chip bucket - Hopper - Folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry bracket: 230 x 110 mm Tine distance inside/outside: 160/600 mm- manual tilting device via hand lever - 4 pieces plastic fixed castors 175 and, 2 pieces steerable- foldable trailer drawbar - drive-in bracket/forklift holder Net weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm good condition Suitable for collecting, storing and transferring recyclable materials; used

Pallet containers / large containers / fruit crates LxWxH 1220 x 1220 x 770 mm, 4 feet, slotted, green Weight: 34kg Slotted design mainly advantageous for storage and transport of fruit and vegetables. Negotiable price: € 89,-- net per piece from stock Larger quantities on request! Goods are in stock. Transport available on request. Viewing is possible at any time by appointment. Further information on request. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock) Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock.

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

approx. 20 m³ / 20,000 litres steel tank, firefighting water tank, cistern In good condition, aboveground or underground storage tank, diesel fuel tank, fuel oil tank volume: approx. 20 m³ / 20,000 litres material: steel length: 6,50 m diameter: 2,00 m weight: approx. 3 to 3,5t The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, slurry, AHL, ASL, canola oil or as rainwater tank, firefighting water tank, cistern etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so  ...

brand new - with a capacity of 50,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - white / RAL-9016 shade (sample photo). (Other RAL co ...

Cat No. 14-00221 Eurolux Storage and Transport Tank Cubic - 750 Litres in AISI 304 stackable – NEW Multi-functional Tanks - pressureless Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height body tank: 800 mm Total Height: 1380 mm Outer Dimensions: 800 x 1200 mm Weight: 110 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karl ...

12 x 14.800 ltr. VA4 completely Pasteurization tank, Holvrieka, round, used standing on feet, it will be only the lower tanks sold, ø 2.48 m, H: 3,80 m (2 St. 7.60 m), incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 20 x 10.200 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 2,10 m, H zs.: 7,40 m, incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 36 x 5.000 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 1.50 m, H zs.: 7 m, incl. all armatures and pressure valves (excluding pr ...

Manufacturer: Hinke Model: ATS Sudmo Capacity: 6400 l Pressure tank up to 5 bar

Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

Preparation of crystal sugar We can offer you a complete system for dissolving and pasteurizing crystalline sugarThe device includes:-Pasteurizer KZE , producer: Schmidt, year: 1997 3-reservoir, double coat (heating-cooling) capacity of one tank: 800 l.dimensions: the height of the tank: 1100 mm, diameter: 1400 mm, total height: 2200 mm

20,000 liters tank with thermal insulation not used tanks

1 cool- and heatable, sterilizable, vacuum-resistant stainless steel process tank for the production of dairy, delicatessen, pharmaceutical and cosmetic products Manufacturer: Seitz-Werke, GmbH Type: DB 170. FW Machine. No.: 2226 Content: 187 litres Material: stainless steel V4A / 1.4571 Product-contacted parts polished Product room: pressure-resistant to 3 bar Double jacket for heating and cooling Double jacket: 35.5 litres, pressure-resistant to 2 bar Operating temperature: up to 133 C Ventilation and vent valve Rise tube Pointer thermometer from 0 - 160 C Pressure gauge Safety valve Filling opening NW 60 Bottom seat valve NW 20 Agitator flange available Operating instructions + list of spare parts, etc. Dimensions: approx. 0.8 x 1.4 m Weight: approx. 200 kg Technical condition: used, excellent as good as new operating condition

12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65

Two stainless steel tanks with drain. About 1500 l individual was sold

Storage tank 1,700 liters Standing from V2A dimensions: Ges.Height: 3600 mm Cyl.Height: 3200 mm Diameter: 850 mm material: V2A – AISI 304, 1.4301 surface: Marbled outside cylinder: With threaded nozzles in the middle top DN100 With ladder hook With manhole 400 x 300 mm With threaded nozzle DN65 With residual drain DN80 subsoil: Also stands steel construction with 4 feet

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer

Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive

Spray booth water stabilizer Specifications: Agitator Pump Filler neck Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 thickness 3mm More items - new and used - can be found in our shop! International shipping costs on request!

5892 - RINSING TUB, IMMERSION TUB Dimensions: 1720 x 1100 x 1600 mm Tank size: 1200 x 600 x 1400 mm Weight: 248 kg Material: Acid-resistant It is equipped with a connection suitable for filling and emptying (ball valve), a pneumatic (electric) valve is used to ventilate the tank.

BATCH TYPE PASTEURIZATION TANK SUITABLE FOR HEATING AND COOLING TYPE: Jacketed and insulated tank CAPACITY: 1.000 l/h milk INCLUDING: Paddle mixer with motor and reductor, thermomter and manhole. Batch pasteurizer tank for milk, juice, dairy productsetc They are heated by steam, pressure max. 2 BAR. ( they are jackated and insulated ) Outer dimensions are as below; Diameter: 130 cm Height: 160 cm The motor power of the mixer is 0,75 kW. There is a thermometer mounted on the top to see the product temperature. There is a CIP ball mounted on top inside in order to clean the tank. There are side plates to prevent vortex inside. 2 PCS AVAILABLE

1 of used CCT Cylindro Conical Tank / DPV Dual Purpose vessel, manufactured by Staes of Belgium, vertical cylindrical conical stainless steel vessel mounted on four legs. Overall height approx. 5.162 mm, OD 2.000 mm, ID 1.850 mm, 6.500 liters working / fermenting capacity (approx. 8.000 liters brim full), SWP 3 Bar, CE and PED compliant. Top and side entry manway, C.I.P Pipe and a selection of valves and fittings. 9 available (3 of which with top and side entry manway, and 6 with side manway only).

Qty. 1 Second-hand vertical fermentation tanks Mfc.: Holvrieka, Schmidding, Ellinghaus Built: 1991, 1996 Capacity: 24 x 1450 hl & 4 x 237 hl N° Name Producer Year Data Comments 1 Fermentation tanks Holvrieka 1991 1450 hl 2 tanks 2 Fermentation tanks Schmidding 1996 1450 hl 16 tanks 3 Fermentation tanks Ellinghaus 1991 1450 hl 6 tanks 4 Fermentation tanks Ellinghaus 1991 237 hl 4 tanks

Milk tank with cooling unit, without automatic cleaning machine Nominal capacity: approx. 4100 l Material: Stainless Steel Dimensions (LxWxH):approx. 3.55 x 1.80 x 1.70 m Availability: as of now

ZKT, 200 HL

Double jacketed, isolated, process tank, previously used in a dairy factory as cream tank. Pressure in the jacket 3,5 bar. Pressure in the tank: ATM. Central placed propellor agitator with 2x big blades (diameter 1.280 - 1.600 mm) for gentle treatment of the product (cream). Motor agitator: 2,6/4,4 kW. Aearator on top of the tank (ATM). Manhole on top of the tank. Porthole with light on top. CIP bowls for cleaning inside the tank. Temperature probe and level ruler with interior float. 3 Stainless steel legs. Outlet in the bottom, 450 mm height, with outlet valve (76 mm connection). Cylindrical height: 3.100 mm. Total dimensions: Ø 3.100 x 5.800 mm. Tank already dismantled out of the factory and located in an outside warehouse in France., Type of Machine: Process tank, Volume: 20.000 liter, Double jacketed: Yes, Insulation: Bottom, Type of agitator: Central placed propellor agitator with ...

Double jacketed, aseptic tank, previously used in a dairy factory for the storage of sterilized UHT milk. Pressure in the jacket: ATM. Pressure in the tank: -1 / 3.5 Bar. Allowable temperature in the jacket: 20 / 150 °C. Allowable temperature in the tank: 20 / 150 °C. Total capacity of the jacket: 3.015 liter. Total capacity of the tank: 40.224 liter. Surface of the jacket: 33 m2. Group Fluide: 2. Category: III. 3 stainless steel legs. No agitator. Manhole on top of the tank. CIP bowls for cleaning inside the tank. Outlet in the bottom, 730 mm height, with outlet of 76 mm. Stairs on the outside. Cylindrical height: 3.000 mm. Inside diameter: 3.500 mm. Total dimensions: Ø 3.684 x 6.081 mm. Weight: ± 7.000 kg. Construction drawing available. CE labelled., Sterile tank available because complete factory is closed., Sterile tank already dismantled and located outside on cradles., Type of ...

Isolated, process tank, previously used as in a dairy factory. Volume 47.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole at the side of the tank (manhole cover excluded). CIP bowls (3x) for cleaning inside the tank. Agitator connection flange at the side on the bottom but without agitator itself. 6 Stainless steel legs. Outlet in the bottom, 400 mm height. Cylindrical height: 4.070 mm. Total dimensions: Ø 3.900 x 5.700 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 2x tanks, stocknumber: #917 / #918., Type of Machine: Process tank, Volume: 47.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, but manhole cover excluded, Number of feet: 6x, Internal height: 4. ...

Isolated, process tank, previously used as in a dairy factory. Volume 47.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole at the side of the tank (manhole cover excluded). CIP bowls (3x) for cleaning inside the tank. Agitator connection flange at the side on the bottom but without agitator itself. 6 Stainless steel legs. Outlet in the bottom, 400 mm height. Cylindrical height: 4.070 mm. Total dimensions: Ø 3.900 x 5.700 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 2x tanks, stocknumber: #917 / #918., Type of Machine: Process tank, Volume: 47.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, but manhole cover excluded, Number of feet: 6x, Internal height: 4. ...

Cylindrical Cone Fermenting Tanks CCT 8 x 150hl Cylindrical cone fermenting tanks (CCT) with net capacity 150hl. Tanks are vertical indoor type with 80 mm PU insulation, self-standing on four legs, with three (glycol) cooling zones, two on the side + one in cone. Tanks have cooling control system for each tank and each zone separately, sampling valve on outside on tank skirt, two CIP panels which are connected to tanks, inside tank rotating CIP ball and normal under pressure and overpressure safety valves on top of thanks. Generally, tanks are in good condition, and they have a high hygienic level. These CCTs have a dedicated chiller made by made by Italian Rhoss S.P.A in year 2015. Compressor is a scroll type, rotary, hermetic and with Inverter actuation (1+i) complete with thermal protection and casing heater. Cooling refrigerant is Freon R410R. Chiller is air cooled by two axial f ...

Beer Storage Tanks, Stainless Steel, Horizontal 6 x 12000 L Beer lager house with 6 stainless steel horizontal pressure tanks installed in stainless steel tank rack which keeps tanks in two layers for saving floor area. Originally these tanks were designed for Weiss Beer and therefore max operating pressure can be 5.8 bars. Tanks are jacketed and cooled with glycol-water solution from sides of the tanks. Tanks are equipped with pressure safety valves, CIP bowl, temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - Lager Tank Gross 3 x 12000 liters, work pressure 4 bars, year 1980 - Lager Tank BAM Freising 3 x 12488 liters, work pressure 5.88 bar, year 1974 - Tank material Werkstoff 1.4541 (10 CrNiTi 18) - One stainless steel rack for supporting ...

Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

Used approx. 3 m³ / 3,000 litres polyester tank / GRP tank, transportation tank, Staffelstein tank, good condition. Dimensions: H = 2, 00 m (tank) H = 2, 50 m (total) W = 1, 00 m L = 1, 60 m (tank) L = 1, 70 m (total) Overground, upright tank, incl. 4 steel feet/ cones, dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personal ...