tank container used for sale

Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer

Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive

Spray booth water stabilizer Specifications: Agitator Pump Filler neck Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 thickness 3mm More items - new and used - can be found in our shop! International shipping costs on request!

1 of used CCT Cylindro Conical Tank / DPV Dual Purpose vessel, manufactured by Staes of Belgium, vertical cylindrical conical stainless steel vessel mounted on four legs. Overall height approx. 5.162 mm, OD 2.000 mm, ID 1.850 mm, 6.500 liters working / fermenting capacity (approx. 8.000 liters brim full), SWP 3 Bar, CE and PED compliant. Top and side entry manway, C.I.P Pipe and a selection of valves and fittings. 9 available (3 of which with top and side entry manway, and 6 with side manway only).

Qty. 1 Second-hand vertical fermentation tanks Mfc.: Holvrieka, Schmidding, Ellinghaus Built: 1991, 1996 Capacity: 24 x 1450 hl & 4 x 237 hl N° Name Producer Year Data Comments 1 Fermentation tanks Holvrieka 1991 1450 hl 2 tanks 2 Fermentation tanks Schmidding 1996 1450 hl 16 tanks 3 Fermentation tanks Ellinghaus 1991 1450 hl 6 tanks 4 Fermentation tanks Ellinghaus 1991 237 hl 4 tanks

horizontal steel tank with inner coating, pressure tank Can be used underground and above ground Volume: 35,000 L Dimensions: Ø 2.50 × 7 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

60,000 litre service water tank UTH made of V2A insulated horizontal Properties: Volume 60000 L Overall length 6100 mm Cylinder length 4500 mm Total height 4300 mm Diameter 4200 mm Material V2A (AISI 304) 1.4301 Insulation 150 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Number of feet 4 Description: Tank crest: CIP Ball Ventilation nozzle In front: Level indicator with scale Manhole 440 x 340 mm Ladder hooks Residual drain with disc valve Thermometry Subsoil: 4 trumpet feet with domes - height adjustable with bearing cup stiffener Thermometry Behind: Connection Thermometry

BIG hook lift container with 5000 l tank

Allestimento: Heating/cooling, Insulation, Overpressure,Products: Van Hool,Stato: used,Volume / Litri : 25.000,Pressione massima: 3,0,Tipologia: horizontal,Piedi : Rack,Heating/cooling (filter bar): present,Pressione massima ammissibile: 3.0,Coibentazione : present,Altezza Totale: 2.900,Larghezza Totale/mm: 2.550,Lunghezza Totale/mm: 6.060,anno di costruzione: 2014,Documentazione tecnica: Certificate of acceptance, Chiusino superiore : on the container,targa identificativa: Yes, Scarico : present,Osservazioni: material, in contact with the product: 1.4402 (Aisi 316L) Frame, Fe (lacquered)

GEA-INTEDAS vertical tank made of AISI 304L stainless steel. On legs. Capacity: 6000l. 4 lower outputs and 1 upper entrance. With aeration valve and top manhole cover. Atmospheric. Design temperature: 90º. Previous use: mains water. Series No.: 10D100. Dimensions: Diameter: 1500mm. Height 5280mm.

Vertical tank made of stainless steel. On legs. Capacity: 20,000 l. With side overflow and 2 lower outlets. Previous use: Mains water. Series No.: 50D100. Dimensions: Diameter: 2600 mm. Height: 5220 mm.

Vertical tank made of stainless steel. On legs. Capacity: 15,000 l. Heat-insulated lining. 2 Entrances, top and bottom. Top manhole cover. Previous use of recovered hot water. N. Serei: 10TA200. Dimensions: Diameter: 2500mm. Height: 4860 mm.

Vertical tank made of stainless steel. On the basis of E. BACHILLER. With railings. Capacity: 30,000 l. Previous use: Milk. Atmospheric. Series No.: 10D700. Dimensions: Diameter: 2700 mm. Height: 7500 mm. Base 1060 mm. Weight: 3360 kg. available

Roll-off container TECHNICAL DATA: External dimensions: 7.28 x 2.46 x H 2.44 m Interior dimensions: 6.94 x 2.31 x H 2.19 m Suitable for garbage collection

Properties: Volume 1000 L Material V2A (AISI 304) 1.4301 Total height 1850 mm Depth 1200 mm Width 1000 mm Cubic design Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description MJ UNI HIGH 1000 liter tanks with two different dimensions: Height: 185 cm Width: 100 cm Depth: 120 cm Or Height: 182 cm Width: 100 cm Depth: 115 cm Topsoil: Flat bottom Filling nozzle Subsoil: Cone bottom pulled forward Remaining Schedule Tank on rack with forklift shoes

Porter Lancastrian 5BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Single Skin Stainless Steel 1.5" RJTF Both Top and Bottom Ports Side Manway 2 x Sight Glasses 3 x Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

1000L Vessel Horizontal stainless steel Manufacture: Mueller (NL) Year of Manufacture: 2013 Diameter Approx 1000mm Height Approx 1100mm (including motor) Length Approx 2400mm Stainless Steel Single Skin Bottom Outlet DIN Butterfly Valve Working Pressure 3bar Pressure Gauge Stainless Steel Cradle/Frame with Four Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

1000 Litre Stainless Steel Second Hand Tank Capacity: 1000L / 220 Gallons / 6 Barrels Vertical Stainless Steel Vessel, with dished top and dished base Free standing on 3-off stainless steel legs with adjustable feet Working pressure 1 Bar Empty weight: 100kg approx. Fittings: 1 x DN40 Top Inlet 1 x 120mm Diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Whirlpool Vessel, fitted with stainless steel hinged lid. Approx. 2000Litres Tangential inlet with 1.5" RJT male inlet point. Three separate take off points with 1.5" RJT male butterfly valves. Insulated and clad in fully stainless steel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

40BBL/65HL Conditioning tank manufactured by DME Vertical cylindrical single skin tanks for use in a chilled room . Dimensions approx: Diameter 2200mm Overall height 3,700mm Tanks are stamped – Certified by Meuller Originally designed for 15PSI Side entry manway door and C.I.P Arm Working capacity is 40UKBBL/65HL with 11% head space This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

50BBL/80HL conditioning/bright tanks MANUFACTURED BY BRABY YOM 1973 Test pressure 45PSI Working pressure 30PSI Vertical cylindrical single skin tanks . Side entry manway door and C.I.P Arm This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Stainless Steel Vertical Cylindrical Tank 2000L. Single skin with side entry manway and top inspection port. Lifting eyes Sight level gauge. Sample Tap Racking point with valve. Bottom outlet with DIN40 butterfly valve. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

1000L Horizontal Tank Stainless Steel 6 Barrels / 220 Gallons. Horizontal stainless steel vessel, dished ends. Free standing on 4-off stainless steel legs with adjustable feet. 1½” RJT Female Top inlet. 1 x 120mm diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

900L Vertical Tank Stainless Steel Working capacity 5 Barrels / 200 Gallons. Vertical stainless steel vessel, dished top and base. Free standing on 3-off stainless steel legs with adjustable feet. DIN40 Top inlet. 1 x 120mm diameter Viewing Glass 1 x DIN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

75HL Vessel - Atmospheric Fermenting vessels Vertical Cylindrical with conical base Approx dimensions: Overall height 4850mm Overall diameter 2200mm Legs 1830mm Top Dish 450mm Working capacity 75HL Max Brim full capacity 100HL estimated Fittings inlet/outlet 2” RJT Vessels fitted with internal rotating sprayballs ,sample taps, ,racking point with racking arm and a central top manway entrance There are cooling jackets on the Cone and the side wall (single zone) Vessels are insulated and clad in riveted stainless steel The vessels have previously operated at up to 3 Bar. However there are no specification plates on the vessels and the design drawings are not available Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Cylindrical, Vertical stainless steel tank 25BBL Working capacity Supplied By East field Process Diameter Approx 2400mm Overall height Approx 2850mm Top entry man way door External cooling Jackets on tank shell Insulated with stainless steel cladding over Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Cylindroconical Vessel Vertical stainless steel tank Floor Length Cladding Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 2300mm Side entry man way door with DIN 15 Male Sample Port Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Temp Probe Pocket Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000L Vessel - Dish Bottom Vertical stainless steel tank Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 1900mm Side entry man way door with DIN 15 Male Sample Port and Sample Tap Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male Temp Probe Pocket 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Vessel - Dish Bottom Vertical stainless steel tank Diameter Approx 1050mm Overall height Approx 1650mm Side entry manway door Single skin stainless steel 1.5" RJT Top and Bottom Fittings Sight Glass DIN 80 Top fitting for gas vent 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Porter Lancastrian 1500L/10BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Overall height Approx 2900mm Single Skin Stainless Steel Inlet 1" RJT Side Manway Sight Level Tube Front Sight Port 3 x Legs Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Double jacketed, isolated, process tank, previously used in a dairy factory as cream tank. Pressure in the jacket 3,5 bar. Pressure in the tank: ATM. Central placed propellor agitator with 2x big blades (diameter 1.280 - 1.600 mm) for gentle treatment of the product (cream). Motor agitator: 2,6/4,4 kW. Aearator on top of the tank (ATM). Manhole on top of the tank. Porthole with light on top. CIP bowls for cleaning inside the tank. Temperature probe and level ruler with interior float. 3 Stainless steel legs. Outlet in the bottom, 450 mm height, with outlet valve (76 mm connection). Cylindrical height: 3.100 mm. Total dimensions: Ø 3.100 x 5.800 mm. Tank already dismantled out of the factory and located in an outside warehouse in France., Type of Machine: Process tank, Volume: 20.000 liter, Double jacketed: Yes, Insulation: Bottom, Type of agitator: Central placed propellor agitator with ...

This hot water tank is a vertical, insulated stainless steel tank with an and . The tank is also equipped with a ( / ) and is ideal for applications where hot water is required at a constant pressure. The tank has an outlet pipe, a hose level indicator, and a pressure gauge for pressure monitoring. The robust construction and high-quality materials ensure long-lasting and reliable use in industrial environments. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, insulated, heatable stainless steel tank, Gross volume: 2000 l, Height: 2100 mm, Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304), Base construction: standing on 4 feet, Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicat ...

Vertical stainless steel pressure tanks on tubular legs, fitted with various fittings., Additional title: Vertical stainless steel tanks, Capacity: 4969 l, Operating pressure: 2 atm, Width: 1,8 m, Height: 2,5 m, Weight: 300 kg, Material: Stainless steel 1.4541 (AISI 321), Position: vertical, standing on 4 pipe feet, Base construction: cylindrical tank with dished heads, Features: Manway; safety valve; CIP piping

This vertical stainless steel tank from Christian Gresser Behälter- und Anlagenbau GmbH is designed for the efficient storage and processing of liquids, has a volume of 11 hl and an operating temperature of up to 50 °C. The tank has an insulated base construction and is equipped with a cartridge heater, a level indicator (hose), a sampling tap, a manhole opening with cover, an overflow, and two outlets with manual valve flaps, making it extremely versatile for various process applications. It has a width of 1 m, a height of 2.6 m, and a weight of 350 kg. Our team at VBW Asset Trade will be happy to answer your questions., Volume: 11 hl, Operating temperature: 50 °C, Power: 25 kW, Voltage: 400 V 3~, Width: 1 m, Height: 2,6 m, Weight: 350 kg, Material: stainless steel, Position: vertical, Base construction: insulated, Features: cartridge radiator, level indicator (hose), sampling tap, m ...

Earth tank, storage tank, steel tank - brand new for the storage of HEL with 50,000 litres capacity, according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. Dimensions: D = 2.50 m - L = approx. 10.80 m - weight approx. 9.3 tons. Incl. a walk-in dome shaft, multi-part, according to DIN 6626, height-adjustable from approx. 850 mm to 1,050 mm, as well as a walk-in cover, galvanized + tagwaterproof. Containers ex works, freely charged. Additional price for a navigable dome shaft according to DIN 6626 General: You will receive an invoice with VAT shown. The purchase is made on our general terms and conditions. Further tank systems (new and used) as well as rental systems are also on offer ...

Kat-No 06-1101-1 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 620 mm in the end Height Zyl: 1000 mm Total height: 1410 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Delivery: immediately from stock. All prices are ex works plus law VAT.  ...

Kat-No 06-1101-3 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 6: 720 mm Height Zyl: 1250 mm Total height: 1660 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. The price is for a tank. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Available in other tank sizes: 300,500,600,800,1000,1 ...

Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...