127,274 used machines on RESALE, but how to find them? Machine Search
A container with agitator including three smaller mobile tanks and a small control cabinet is available. Large tank volume: 1000l, large tank diameter: 1000mm. Small tank test pressure: 1.5bar, small tank operating pressure: 1bar, small tank volume: 150l, small tank year of manufacture: 1999. An on-site inspection is possible.
4.900 litre, Stock number: T1341, Litre: 4.900, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On plate, Top: Conical, Inner diameter: Ø 950 mm., Total height: H 7000 mm., Other: 2 pcs. lifting eyes
Two identical insulated double-jacket cooling tanks Möschle are available. Vessel volume: 15500l, jacket volume: 60l, max. jacket pressure: 3bar, max. medium temperature: 50°C, min. medium temperature vessel/jacket: 18°C/10°C, diameter: 2650mm, overall height: 4800mm. Including permanently installed agitators. An on-site inspection is possible.
750 litre, Stock number: T1222, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Standing: 4 pcs. legs, Heating coil: In the bottom, Agitator: Yes, CIP: Yes, Dimensions: L 920 x W 820 x H 1020 mm.
11700L Square Vessel - Atmospheric Vertical stainless steel tank 11700L Gross Volume Manufacture: Moeschle Behalterbau GmbH Height Approx 2700mm Width Approx 2500mm Depth Approx 2550mm Double Walled Insulated Stainless Steel Clad sides Cooling Jackets 2" RJT Bottom Outlet Smaple Point 1.5" External Down Pipe Large Top Access Door Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Kettle (12,000 litre vessel) Manufactured By Moeschle estimated 50BBL working capacity Vertical cylindrical Stainless steel (316) vessel OD 2400mm ID 2200mm Overall height APPROX 5250mm 2” RJT Bottom outlet Top and Side entry man way door External Steam heating Jackets on tank shell Insulated 150mm thick with stainless steel cladding over Year of Manufacture: 2001 Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
650 litre, Stock number: T115, Litre: 650, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On flat bottom, Top: Open with strengthening ring, Inner diameter: Ø 1000 mm., Total height: H 870 mm.
2000L Vessel - Atmospheric Vertical stainless steel tank 2000L Gross Volume / 1630L Working Volume Manufacture: Fabdec / 2014 Dished Top & Bottom Insulated Stainless Steel Clad sides Cooling Jacket Bottom Outlet 1.5" RJTF High Level Side Port 1.5" RJTF Top Port (CIP) 1" RJTM Detachable Spray Ball Top Manway Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
11800L Square Vessel - Atmospheric Vertical stainless steel tank 11800L Gross Volume Manufacture: STB Engineering / 2014 Height Approx 2700mm Width Approx 2550mm Depth Approx 2550mm Insulated Stainless Steel Clad sides Cooling Jackets 1.5" RJT Pipework & Fittings Large Top Access Door Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
12.500 litre, Stock number: T671, Litre: 12.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: In cradles, End bottoms: Conical, Tank cover: In end bottom, Agitator: Flange for agitator in end bottom, CIP: Yes, Inner diameter: Ø 2300 mm., Dimensions: L 2950 mm., Manufacturer: Kolding DDMM
10.000 litre, Stock number: T3967, Litre: 10.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: Yes, End bottoms: Conical, Tank cover: In the end, 520 x 390 mm., Inner diameter: Ø 2150 mm., Dimensions: L 3200 x W 2150 x H 2300 mm., Total height: H 2400 mm., Manufacturer: Kolding DDMM, Other: Prepared for agitator
500 litre, Stock number: T2209, Litre: 500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Open with hinged lid, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, from the lid in top, Motor: 0,4 kW - 380 Volt - 384 rpm., Working pressure double jacket: Max 0,5 Bar, Inner diameter: Ø 1000 mm., Outer diameter: D 1150 mm., Total height: H 1650 mm., Manufacturer: Kolding DDMM
300 litre, Stock number: T3626, Litre: 300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, CIP: Yes, Inner diameter: Ø 760 mm., Total height: H 1350 mm., Manufacturer: Kolding DDMM, Other: Inspection cover in the top
3.300 litre, Stock number: T2657, Litre: 3.300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes, Agitator type: Frame agitator from the top with bottom guideway, CIP: Yes, Inner diameter: Ø 1700 mm., Outer diameter: D 1856 mm., Total height: H 3350 mm., Manufacturer: Kolding DDMM
6.500 litre, Stock number: T3981, Litre: 6.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the side, 500 x 370 mm., Agitator: From top with bottom guideway, Agitator type: Mixing wing, Motor: 1,5 kW - 230/400 Volt - 58,5 o/min., CIP: Yes, 3 pcs., Inner diameter: Ø 1900 mm., Total height: H 3870 mm., Manufacturer: Pasilac, Model/type: MAV
Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks:, What is a Temperature-Controlled Processing Tank?, A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle., Key Features, - Heating and Cooling Systems:, - Heaters: Can be electric or steam-based to raise the temperature of the contents., - Chillers: Usually water or glycol-based cooling systems to lower the temperature., - Insulation: ...
30.000 litre, Stock number: T2034, Litre: 30.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Lying: For burial, End bottoms: Dished, Outer cladding: Fiberglass coating, Tank cover: In the top, bolted, Ø 500 mm., Inner diameter: Ø 2480 mm. , Total length: L 6800 mm., Manufacturer: Gjettermann & Nielsen, Year: 1980/82
Used Tetra Pak aseptic tank. Year of manufacture: 2010. Capacity: approx. 13,000 litres. Valve system: Equipped with cluster valves for effective product flow control, reduced contamination risk and easy integration with aseptic production lines. Suitable for aseptic storage of milk, flavoured milk, juices, liquid dairy products and other sensitive food products requiring sterile conditions. Key features: - Maintains product sterility - Supports CIP (Cleaning-in-Place) systems - Ensures a longer shelf life for stored products - High-quality stainless steel construction (compliant with Tetra Pak standards)
15 BBL working capacity stainless steel vertical cylindrical mash tun, with side entry door for spent grains removal. Drilled plate floor removable in 4 sections. Sparge arm and bridge. Vessel is free standing on stainless steel removable legs. Has a 2" RJT Female outlet. Lid consists of one half moon shape section. Overall Height from ground - 2500mm Internal Diameter - 1550mm Overall Diameter - 1650mm Internal Vessel Height - 1550mm 50mm of insulation to the shell, with stainless steel cladding pop riveted. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Mash Tun 5bbl working capacity, vertical cylindrical stainless steel vessel, with side entry door. Sparge Bridge with CIP spray ball. 2 section lift of lid. 2 section drilled plate floor. Year of Manufacture: 2015 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Sollich RTN1000 Chocolate tank 2006, chocolate tank, 100Kgs capacity with adjustable temperature control, top mounted motor with agitation and scrape surface, 3Ph
2M S/S TANK (AUTOMATED DOSING) (F20BC) CURRENCY: MYR If interested, kindly contact Farha (nurfarha_atopglove.com.my) or Ms Fatimah (fatimah_asmadtopglove.com.my)
A stainless steel storage tank with an integrated agitator is available. Calibration: 1996, Volume: 2700l, Pressure: non-pressurized, Material: presumably V2A, Bottom outlet: DN50 milk pipe. An on-site inspection is possible.
An above-ground double-wall heating oil and diesel tank Kammerer is available. Volume: 5m³, length: 4350mm, outer diameter: 1256mm, weight: approx. 1100kg, monitoring space volume: approx. 50l, test overpressure tank/interstitial space: 2bar/0.6bar, material: S235JR, heating oil extraction fitting: Euroflex 3, length: 2150mm, max. flow rate: 150l/h, tank heating dimensions X/Y: 646mm/47mm, limit value sensor: 23 RO. Documentation available. On-site inspection is possible.
Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "
Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg
New 80.000 litre tank,, stainless acid proof steel AISI 316,, standing for foundation., Flat sloping bottom., Conical top 20° ,, Tank cover in the side., 3 pc. connection pieces, Tankdimension Ø 3400 x cylinder 9000 mm., The tank is made of pickled plate type B2., All weldings inside grinded grain 60., All weldings out side sandblasted., Density 1,0., Working temperature 0 - +50°C., Working pressure: None, Scoop of application: A, Litre: 80.000, Material: Stainless acid proof steel AISI 316
1.150 litre, Stock number: T1002, Litre: 1.150, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open with bolted lid, Double jacket: Chequer, Inner diameter: Ø 1070 mm., Outer diameter: D 1130 mm., Total height: H 1790 mm.
New 5.000 litre tank,, stainless acid proof steel AISI 316,, closed top, standing on 3 pc. legs., Conical top and bottom 15°,, tank cover in the top Ø 450 mm., Ø 1” pipe in the top centre,, Ø 4” pipe in the top,, Ø 2” pipe in the bottom centre., The tank is made of pickled plate type B2., All weldings on the inside grinded grain 60., All weldings on the outside sandblasted., Tank dimension Ø 2000 x cylinder 1500 mm., Density: 1,0., Working temperature: 0 - +50°C., Working pressure: None, Scope of application: A, Litre: 5.000, Material: Stainless acid proof steel AISI 316
9.000 litre, Stock number: T1235, Litre: 9.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes, Agitator type: 2-way frame agitator, Agitator placement: From bridge in the top, Motor: Inner agitator; 1,5 kW - Frame agitator; 2,2 kW, CIP: Yes, 2 pcs., Inner diameter: Ø 2100 mm., Outer diameter: D 2220 mm., Total height: H 4850 mm.
3.000 litre, Stock number: T1266, Litre: 3.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the side, Agitator: Flange for agitator in the side, CIP: Yes, Inner dimensions: Ø 1900 mm., Total height: H 2050 mm.
1.000 litre, Stock number: T1277, Litre: 1.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open with strengthening ring, Bottom: Conical, Turbolence plate: Yes, Agitator: Flange for agitator in the top, Inner diameter: Ø 1150 mm., Total height: H 1700 mm., Other: The tank has not been used
Isolated, process tank, previously used as in a dairy factory as CIP tank. Volume 10.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole on top of the tank. CIP bowls (3x) for cleaning inside the tank. Small coil inside. Agitator connection but without agitator itself. 3 Stainless steel legs. Outlet in the bottom, 500 mm height, with pneumatic outlet valve. Cylindrical height: 2.350 mm. Total dimensions: Ø 2.450 x 4.200 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 10.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, 440 mm, Number of feet: 3x, Internal height: 2.350 mm, Total outsid ...
1.000 liter, Stock number: T1281, Litre: 1.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Transportation tank, Standing: 4 pcs. legs with truck grip, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 370 mm., Inner diameter: Ø 1200 mm., Total height: H 1650 mm.
800 litre, Stock number: T1283, Litre: 800, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 430 mm., Agitator: Flange for agitator in the top, CIP: Yes, washing wing, Inner diameter: Ø 1200 mm., Total height: H 1400 mm., Other: The tank is outside slightly dented in the cladding
550 litre, Stock number: T1300, Litre: 550, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Transportation tank, Standing: 4 pcs. of legs with truck grip, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 450 mm., Inner diameter: Ø 950 mm., Total height: H 1360 mm.
700 litre, Stock number: T1306, Litre: 700, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Bottom: Conical, Tank cover: In the top, Ø 430 mm., Inner diameter: Ø 950 mm., Total height: H 1200 mm., Other: Flange for agitator at the side
3.500 litre, Stock number: T1360, Litre: 3.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Flange for agitator in the top, Inner diameter: Ø 1700 mm., Outer diameter: D 1800 mm., Total height: H 2250 mm., Other: The tank is slightly dented in the top
7.500 litre, Stock number: T1361, Litre: 7.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On foundation ring, Top: Conical, closed, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Aluminum, Tank cover: In the side, Agitator: Yes , Agitator type: Frame agitator , Agitator placement: From the top, CIP: Yes, Inner diameter: Ø 2000 mm., Other: The outside cladding is in poor repair
900 litre, Stock number: T4035, Litre: 900, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On a flat bottom, Top: Open top, Inner diameter: Ø 950 mm., Total height: H 1280 mm.
2.500 litre, Stock number: T1374, Litre: 2.500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs with bracing, Top: Open with bridge, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Turbolence plate: Yes, Inner diameter: Ø 1150 mm., Outer diameter: D 1300 mm., Total height: H 3090 mm.
3.000 litre, Stock number: T1418, Litre: 3.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On foot console, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 390 mm., Turbolence plate: Yes , Agitator: Yes, Agitator type: Dissolver agitator from the bottom, Motor: 75 kW, Inner diameter: Ø 1300 mm., Total height: H 4400 mm., Manufacturer: Temex Disperseur
20 litre, Stock number: T1388, Litre: 20, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 3 pcs., Item: Tank, Top: Dished, Bottom: Conical, Insulated: Yes, Working pressure: 2,6 bar, Working temperature: 0-133° C, Outer cladding: Fully welded stainless, Inner diameter: Ø 200 mm., Dimensions: L 240 x H 860 mm., Other: To be mounted hanging, Manufacturer: S. S. Rustfri A/S, Model/type: 13 PT, Year: 1992
2.000 litre, Stock number: T1423, Litre: 2.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, boltet Ø 400 mm., Agitator: Yes , Agitator type: Ekato agitator from the top with sterile sealing, Motor: 2,5 kW - 240-1200 rpm., Inner diameter: Ø 1300 mm., Outer diameter: D 1500 mm., Total height: H 3180 mm.
2.000 litre, Stock number: T1467, Litre: 2.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Konisk, Bottom: Konisk, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes, Agitator type: Anchor agitator from the top, Flange for agitator in the side, Motor: 0,75 kW - 27 rpm., Inner diameter: Ø 1750 mm., Outer diameter: D 1900 mm., Total height: H 2650 mm., Manufacturer: Helsted Ificon
2.500 litre, Stock number: T1475, Litre: 2.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On frame, Top: Open with hinged lid, Double jacket: Yes, Agitator: Yes, Agitator type: Frame agitator from the top with scrape, Motor: 11,0 kW - 27 rpm., Inner diameter: Ø 1800 mm.
Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Oval manhole - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Connection for ventilation
350 litre, Stock number: T1493, Litre: 350, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Transportation tank, Standing: In transportation rack with truck grip, Top: Open with hinged lid, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Inner diameter: Ø 600 mm., Outer diameter: D 800 mm., Total height: H 1620 mm.
525 litre, Stock number: T1515, Litre: 525, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Standing: 3 pcs. legs, Top: Open with hinged lid, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, CIP: Yes, Inner diameter: Ø 850 mm., Outer diameter: D 1000 mm., Total height: H 1350 mm., Manufacturer: Paasch, Other: Flange for agitator in the lid
maximum number of results exceeded
please refine your search
