tank bar used for sale

75 running metres, 6/5/6 mm, height 1.43 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1430 mm high and 2,500 mm long Posts for concreting: 2000 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, ...

75 running metres, 6/5/6 mm, height 1.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, ...

62.5 running metres, 8/6/8 mm Height: 1.23 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1230 mm height and 2,500 mm length Posts for concreting: 1800 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 ...

62.5 running metres, 8/6/8 mm Height: 0.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 830 mm high and 2,500 mm long Posts for concreting: 1400 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40 ...

75 running metres, 6/5/6 mm Height: 0.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 830 mm high and 2,500 mm long Posts for concreting: 1400 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40,  ...

75 running metres, 6/5/6 mm, height 2.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 2,030 mm high and 2,500 mm long Posts for concreting: 2,600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 4 ...

125 running metres, 8/6/8 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 50 pieces Number of posts: 51 pieces Total weight: 2200 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Industrie ...

250 running metres, 8/6/8 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 4800 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indu ...

62.5 m, 8/6/8 mm, height 1.83 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x 40, post caps  ...

62.5 running metres, 8/6/8 mm, height 2.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 2,030 mm high and 2,500 mm long Posts for concreting: 2,600 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...

75 running metres, 6/5/6 mm Height: 1.03 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1030 mm height and 2,500 mm length Posts for concreting: 1600 mm Number of fence elements: 30 pieces Number of posts: 31 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 x ...

62.5 running metres, 8/6/8 mm Height: 1.23 m Double bar mat fence complete set including post and fastening material retaining plates Fence elements: 1230 mm height and 2,500 mm length Posts for concreting: 1800 mm Number of fence elements: 25 pieces Number of posts: 26 pieces Double rod mats Material (RAL) Galvanized according to DIN EN 10244-2 and powder-coated Fence Spikes 30mm Mesh size 50mm x 200mm Mat width 2510mm Fence post with clamp Material: Hot-dip galvanized, powder-coated according to DIN EN ISO 1461 and RAL 7016 Material: Post cap: Plastic Material Accessories Stainless Steel Post profile (mm) 60 x 40 x 2 Fence fastening Stainless steel rivet nuts already integrated into the post Screws for Clamps Stainless Steel Screws M8 Accessories (included) Pre-assembled plastic fastening attachments incl. rivet nuts, aluminium clamping tabs, fence screws M8 ...

Used complete debarking system with CIM feeder, Cambio 71-75 5-arm AirTen rotor and pull-out control unit. Attachment immediately free.

Cambio 800D, 6 Arm AirTen, built in 2018. Well preserved Cambio 800 with 6 x direct drive, latest current model! 90 kW rotor drive! Each individual spiked roller is driven by 4.0 kW each. AirTen rotor with 6 tools. Feed up to max. 120 m/min possible. To sell on behalf of a customer. Machine can be viewed at any time.

Doosan (Daewoo) Lynx 220 CNC lathe – a compact and very popular turning centre for serial production and precision machining. Key information • Manufacturer: Doosan Infracore Co., Ltd. (Korea) • Model: Lynx 220 (designation on nameplate: Lynx 220…) • Control system: FANUC (panel marked FANUC Series” visible in the photos) • Year of manufacture (from nameplate): 2005/10 • Power supply (from nameplate): AC 200/220 V, 3~, 50/60 Hz • Rated power (from nameplate): 11.0 kW • Max. load (from nameplate): 23.68 kVA • Full load current (from nameplate): 92.1 A • Short-circuit / interrupting current (from nameplate): 17,000 A • Serial number (from nameplate): 1422006821 (read from the photo) Equipment / accessories visible in the photos • SEI Filtration oil mist extractor / filtration unit mounted on the machine is not included in the sale. Auction-ID: A7-46 ...

Auction-ID: A7-46302-1

Stored in working condition, buyer must provide transport himself. Elevator available to charge it. Auction-ID: A3-43519-17021

: Doosan (Daewoo) Lynx 220 CNC lathe – a proven, compact turning centre for serial production and precision machining. Key information • Manufacturer: Doosan Infracore Co., Ltd. (Korea) • Model: Lynx 220 • Control system: FANUC • Serial number: L220122651 (read from the photo) • Year of manufacture: 2006/07 • Power supply: AC 200/220 V, 3~, PE, 50/60 Hz • Rated power: 11.0 kW • Max. load: 26.68 kVA • Full load current: 62.13 A • Short-circuit / interrupting current: 17,000 A Important note The SEI Filtration oil mist extractor / filtration unit mounted on the machine is not included in the sale. Auction-ID: A7-46285-12

12000 ANSI Lumens, 1920 x 1080 FULL-HD, 3-Chip DLP Auction-ID: A7-46311-56

Vitamin Bar on Wheels 40cm - 1500 W - Refrigerated fruit chambers - Up to 180 glasses per hour - self-washable - Automatic filling system Auction-ID: A1-45807-7

Knoll International Barber & Osgerby Sofa Designer Couch Auction-ID: A7-46320-33

working area:10700 mm Tube length:300-11000 mm min. workpiece diameter:80 mm max. workpiece diameter:260 mm Power:120 KW dimensions:21,5 x 5 x 3,8 m mm weight:90.000 kg pre-turn capacity:200 cdm/min HS Code: 8461 90 00 Description of the system Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1

number of spindles:6 spindle passage:22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools!

number of spindles:8 spindle passage:67 mm Cam controlled multi spindle automatic lathe, used 8 main spindles pick up in pos. 8 threading attachment CNC compound slide in pos. 5, also 2. speed in pos. 2 Hydraulic spindle brake in pos. 4 Incl. length measurement, incl. Brankamp cutting force monitoring tooling: could be different like pictures Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...

number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures.

number of spindles:9 spindle passage:46 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SC9-46 Yob: 2016 Six-spindle automatic lathe with 6 main spindles with max. nominal throughput D=46mm and 3 counter spindles Main spindles: 6 motor spindles D46mm, 5. 000 rpm, 35 Nm to 80 Nm Cross slide units, transverse: 6 units, in positions I to VI, Slide units, longitudinal: 5 units, in positions I to V, Slide units, longitudinal: 5 units, in positions I to V, Counter spindles: 3 units, one each in positions VI, VIII and IX, 7. 500 rpm Cross slide units, transverse: 2 units, in positions VIII and IX, Control: Siemens SINUMERIK 840SL with double NCU Software: Schütte SICS, Sinomerik Operate 4.5, Safety Integreted, Spindle coupling package ?CP-Expert?, for up to 8 spindle couplings (maximum expansion) Synchronous action package ?Level? 2, incl. cross-mode actio ...

Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more inf ...

number of spindles:8 spindle passage:20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AG20 Yob: 2002 eight-spindle automatic lathe 8 main spindles for bars up to D=20mm control: Siemens 840D 1x polygonal turning/thread milling device (new 2011) 1x polygonal turning/thread milling device for long turning (new 2011) 1x thread cutting/quick drilling spindle (new 2011) 1x pick-up device incl. various pick-up collets 4 cnc-cross slides Double cross slide in position 7 Loading magazine PRA 52/P type 33 (bar length 3m), year 2004 High-pressure system Knoll SF 2000/Turbo-3 up to 100 bar, year 2004 Tool monitoring Brankamp Air conditioning unit Rittal in the front switch cabinet incl. spare parts package with various collets, cams and various tool holders for longitudinal and cross slides The machine has been run with oil and has processed brass Please, con ...

number of spindles:6 spindle passage:20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) An independent feed is installed at position 1 A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF20 S Dnt Yob: 1999 Six-spindle automatic lathe with 6 main spindles max. nominal diameter: D=20mm Spindle drum hirth coupled, CNC cross slide in positions 4, CNC cross slide in positions 5, pick up in position 6, sorting chute, 1x independent feed, thread cutting couplings, workpiece belt, Coolant tank with hinged belt chip conveyor Ruez, Oil/steel operation, PLC Siemens S7, Siemens CNC control, Siemens Simodrive 611, The scope of delivery regarding the tooling equipment could be different like pictures. Interface for: IEMCA PRA bar loading magazine (optional: IEMCA PRA40/31/ built in 1997 rear loader)

number of spindles:6 spindle passage:36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2000 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm pick-up unit, Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

CNC Bar Machining Center for Aluminum, Machine No. 6100013187, control Beckhoff C6140 renewed in 2020, infeed of extrusion profile magazine length max. approx. 6000 mm, machining units (drilling / milling: vertical top 1 piece / vertical bottom 4 pieces / horizontal front 1 piece / horizontal rear 1 piece) and (sawing 3 pieces: 45 / 90 / 45 degrees), outfeed belt max. approx. 2700 mm, chip conveyor belt (The article is in condition as existing and unchecked. The article is sold from the foundation and without content/material! For the dismantling and loading of the item, there are no pallets, other packaging material available on site and the buyer must rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary! Mediation of dismantling and loading possible. Contact: Dejan Ducic / dejan.ducic@surplex.com

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

Storage tank, storage tank, diesel tank, fuel oil tank, steel tank, yard filling station, service filling station - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 3.80 m - D = 1.60 m - weight approx. 1.6 to. - ex works, freely charged - General: You will receive an invoice with VAT shown. The purchas ...

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 10,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 5,310 mm Diameter 1,600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 100,000 liters used. The container is used and cleaned from the inside. Length: approx. 15700 mm Diameter: approx. 2900 mm Weight: approx. 16000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We offer the tank system free of charge from the Warstein ...

Kat-No 09-1020 Flat bottom tank/storage tank made of V2A 40,000 litres in very good condition! Standard equipment with: • with manhole front DN 400 x 300 mm • with residual drain DN 50 mm (DIN 11851) • with 2 x connections on the manhole DN 50 mm (DIN 11851) • with level indicator DN 10 with shut-off valve • with connection cover for agitator • with filling pipe DN 30 mm • with 2 x transport eyelets •with central threaded connection socket Dimensions and weight: Diameter:2800 mm Diameter Cyl. with filling pipe upwards:3000 mm Total height:6700 mm Weight approx:3 to For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermedia ...

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

extinguishing water tank, storage tank, earth tank, irrigation tank, sports field irrigation, cistern, rain collection container with 100,000 litres capacity for the storage of service water / extinguishing water. Dimensions: D = 2.90 m - L = approx. 16.00 m The container has a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is provided with a bitumen coating / bitumen insulation on the outside. Slight insulating damage due to removal and transport may be present on the container. Price from Söhrewald - freely charged - For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 dome shaft made of glass-fibre reinforced plastic - GRP, complete with walk-in Steel plate cover - diameter = approx. 1.00 m, height = approx. 0.85m, - 1 pc. suction l ...