134,873 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
USED STAINLES STEEL 316L TALLERES MORES 10,5 M2 TUBULAR EXCHANGER REF.: C6296 General characteristics: Manufactured by TALLERES MORES2 Type Tubular exchanger Material Stainless steel 316L Year built 2000 Technical characteristics: Exchange surface 10,5 m2 Tubes passes 2 Casing passes 1 Tubes length 2490 mm Casing diameter 300 mm
Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018
Second hand crushing mill. Hopper dimensions: - Length 1410 mm - Width 1650 mm - Height 2600 mm Technical features Model PC66120 Machine motor 90 kW (120 cv) - 1480 rpm Equipment configuration Electrical panels Hydraulic power pack Transport information Length 2700 mm Width 2600 mm Height 1800 mm Documentation Maintenance Manual Operation Manual Drawings Electrical Diagrams Condition As is Made by Tallants Navarro
Filling machine Talsa F 25 NEW MACHINE, approx. 25 litres cylinder volume, Solid stainless steel construction, Ground stainless steel cylinder, Hydraulic pistons made of stainless steel, Lid and plunger made of solid stainless steel, Seals for lids and pistons flexible and low-wear, The motor and pump start and stop automatically (via internal contactor and microswitch) as soon as the toggle lever is pressed. Advantages: reduced energy consumption, lower heat and noise, as well as longer service life of the oil and hydraulic components, Piston can be easily removed with robust stainless steel hexagon piston puller wrench (included in delivery), High filling pressure for easy filling even of compact mixtures. No running of the sausage meat flow due to automatic decompression of the plunger. Locking of the toggle lever when lowering the piston. Automatic triggering/shutting off ...
Vertical heat exchanger made of stainless steel from the brand TALLERES MAC of 48.5 m2. Year 2001. Material Stainless steel Technical characteristics Year of manufacture 2001 Number of tubes 203 Working temperature of the tubes 230 ºC Working pressure of the tubes -1 bar Working temperature of the housing 310 ºC Working pressure of the housing 5.39 bar Equipment dimensions Length of the tubes 4000 mm Outer diameter tubes 19.05X1.65 mm Transportation Information Length 4000 mm Width 850 mm Weight 1300 Kg Documentation Plans Exchange Surface Exchange Surface 48.50 m2 Status Reviewed Manufactured by Mac Workshops
Meat grinder, stuffed grinder Talsa D-114, NEW MACHINE, with 114mm Unger blade set, Machine made entirely of high-quality stainless steel, powerful three-phase motor, removable screw housing, Safety switches, large filling tray with CE hand guard, Motor thermal protection, with filler plug and pull-out device for wolf auger, including 5-piece cutting set, Quality knives of the Lumbeck&Wolter brand, also available as B-98 or E-130
Table cutter Talsa K 15, NEW MACHINE, approx. 15 litres bowl capacity, Touch screen 10 inches, infinitely variable knife speed 750 - 3500 rpm, Stainless steel construction, solid cast stainless steel bowl, with removable 3-piece cutter head as standard, (optionally also available with a 6 mm cutter head) programmable, automatic stop according to time and/or temperature, Quality knife of BE machine knife, transparent noise protection cover in accordance with CE, closed lower case, Digital, electronic sausage meat thermometer, Easy cleaning, el. Connection 230V, 2.25kW
ETZ-2011 drainage excavators are designed for deep excavation and the construction of drainage ditches, a monument to the glory days of Talleks. Palms 510.
Description Item # 9194 - MICROWAVE POPCORN PACKAGING LINE Running at around 4500 bags per hour, up to around 365Kgs per hour Including Two (2) RAP TRONIC 1000litres Vegetable Fat Heating Systems, Year 2010, HAPMAN Product Hopper & Elevator Feed, TALON MASSMAN USA) 2-Up Microwave Popcorn Packer, Model 2UP-AEH, Year 2010, 380Volts, 50Hz, 3Phase, 2Hp Motor An in-line bag magazine feeds a rotary bag placer into a clipped flight system, the bag is opened with vacuum, indexed to a volumetric cup filler for corn filling, then indexed to a precision metering pump for liquid filling. The tops of the bags are then sealed in the seal station, indexed and folded, and finally released to the pick off discharge Bags can be filled at the rate of 150 bags per minute BOSCH/TEVOPHARM Pack-201 Flowpack Wrapper, Year 2010, with MARKEM SmartDate X60 Coder, 380Volts, 60hz, 3Phase ISHIDA Metal Detector/Checkw ...
Height=1.14 m, Overall length= 0.45 m, Overall width= 0.63 m, Net weight= 139 kg,
This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...
The machine is completely factory renewed; • 1 year warranty; • Delivery, installation, samples and training are included in the price.
Submersible pump, coolant pump BRINKMANN TAL901/770-G immersion depth = 770 mm pump foot = 200 mm pump flange = 250 mm Q = 600 l/min H = 12 m motor: 2,2,00 6 KW 230 / 400 V used, tested !' Dimension: 1200 x 500 x 250 mm
Manufacturer: TALSA Model: K30 NEO Batch type: Industrial machine Dimensions: 1570 x 780 x 1130 mm Year: 2021 Power: 5600 W Power supply: Three-phase 400 V Tank capacity: 30 liters Rotational speed: variable 750 to 3000 rpm Weight: 330 Kg Digital display Electronic variable speed Programmable automatic shut-off with time and/or temperature constraint Stainless steel Removable head of 3 knives BE-GW Steffens Germany Transparent plastic cover Auction-ID: A1-50725-1
Includes 2x battery, 1x charger and reel trolley Auction-ID: A1-49889-243
These vehicles all start and drive. However, they are sold and delivered in the condition in which they are. All vehicles show normal signs of wear. Materials and cabinets are not included; These are dismantled before sale. Auction-ID: A3-46136-5054
- Dimensions approx. 900 x 900 x 2000 mm. - Approximate weight 250 kg. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-37
Kalmeijer pastry forming roller KGM Taler small 1120-910AProduct descriptionManufacturer: KalmeijerType: Taler smallNo.: 1120-910AZstand: usedPastry figure:Dimension: 55 mmThickness: 4 mmWeight: 13 grRoller width: 250 mmDetails see pictures.
Time relay, safety time relay, safety control, timer, timer -Manufacturer: Grässlin, timer unused in original packaging -Type: talento 121 01.28.0003.1 -Voltage: 220-240V / 50Hz -Quantity: 5x timer available -Price per piece -Dimensions of box: 95/60/H85 mm -Weight: 0.2 kg/pc.
; Gross weight [kg]: 1574; Accessories: SAE 1
CABLE POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Length : 1.000 mm Width : 1.000 mm Height : 2100 mm CABLE PASSAGE Size : 100 mm diameter Height from ground : 1.000 mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application
Height=1.02 m, Overall length= 0.55 m, Overall width= 0.45 m, Net weight= 75 kg,
What's Included? A luxury; one off; high quality; bespoke and purpose built to order from new, mobile coffee bar/cart/station (designed to match it's espresso machine). It's on wheels for transportation and onsite placement. Fabricated in steel and powder coated in plain white, with a stainless steel work surface and polished steel mid section wrap around. It's in very good condition, with only some signs of wear & tear. It can be left plain white or be branded. It has an optional tall lollipop light (see photo) and built in lights for work surface and ambiance. On the work surface, it has a built in sink (cold water). Bar Dimensions Height 1m (excluding tall lollipop-style light. With tall light 2.2m ) x Width 1.6m x Depth 0.68m La Marzocco 2EE, 2 Group Linea classic espresso machine
Very old olive tree (Olea europaea), according to the label about 300 years old, with an exceptionally powerful, broadly spreading trunk base. The deeply furrowed, gnarled bark with hollows, bulges and exposed wooden sections makes the tree a truly unique specimen. From the short, solid trunk grows a tall, loose crown with silvery-green foliage and individual olives. The tree stands in a wire basket with foil on a pallet. An impressive solitaire for large gardens, parks, courtyards or representative entrance areas. Details: Botanical Name: Olea europaea (Olive Tree) Age: approx. 300 years (according to the label) Height: approx. 380 cm Trunk circumference: approx. 300 cm Shape: Solitary tree with short, solid trunk and tall, naturally grown crown Special feature: very old character stem with wide roots, isolated fruit hangings Container: Wire basket with foil, Ø approx. 150 cm, on p ...
Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...
Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...
Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...
Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...
Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...
Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...
Specifications / Technical Data S-720 CNC-Fraesmaschine With the High-Z CNC-Fraes.- and Engraving Machine you acquire an all-round talent in TUeV-certified Quality (EMV). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equipment of all high- ...
Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...
Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...
Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find ...
Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...
maximum number of results exceeded
please refine your search
1.000 € 
