126,769 used machines on RESALE, but how to find them? Machine Search
FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm
FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm
TECHNICAL DATA: Working area: 1200 x 800 mm 3 flywheels: Ø 600 mm Saw blade length: max. 6970 mm Installed power: 3 kW Cutting height: 630 mm
Syringe Dispenser Diluter HAMILTON MICROLAB 715-DIL 600 Series recent equipment that was used in demonstration only. ML635-BZ Unit With ML700 Advanced Controller Accuracy: ±1% Dimensions (WxDxH): 177.8 x 139.7 x 266.7 mm Power supply frequency: 50/60 Hz Max. voltage240 V No. of syringes ; 2 Weight 5.9 kg
Load capacity max. 600 kg, Platform size: approx. 750 × 1050 mm, Power connection: 380 V/50 Hz, The stack/pallet lift must be picked up at the location 77694 Kehl., Truck-loading ramp and/or forklift is available.
Various small machines from a packaging factory are available. 1) Multi-spindle paper drilling machine Constanting Hang 106MK/8, year of manufacture: 1980, drilling spindles: 8, drilling range: 3mm-8mm, hole spacing range: 36mm-630mm. Documentation available. 2) Vibrating table Müro 70x72 ST, paper dimensions X/Y: 700mm/450mm, max. stack height: 100mm, weight: approx. 50kg. 3) Small extraction unit Kongshilde TRL 40, year of manufacture: 2023, machine dimensions X/Y/Z: approx. 900mm/1000mm/950mm. 4) Conveyor belt, year of manufacture: 2018, belt height: approx. 970mm, belt dimensions X/Y: approx. 2300mm/600mm, machine dimensions X/Y/Z: approx. 2400mm/950mm/1050mm. An on-site inspection is possible. Only a package sale is possible.
Size: approx. 3000x6000 mm, with control unit, own weight: 3500 kg
Perkin Elmer AAnalyst 600 Atomic Absorption Spectrometer Untested Equipment Without a computer Without software
An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 145000 € : 2740.5 € : 6080 mm : 6 mm : 4 mm : 350 mm : 10 1/min : 0.5 - 2 ° : 29 : 20 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 5 Stk. : 900 mm : 630 mm : 6370 mm : 7300 mm : 2150 mm : 3400 mm : 2750 mm : 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 31620 € : 603.94 € : 0.4 - 2 mm : 600 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1020 mm y-travel: 510 mm z-travel: 510 mm total power requirement: kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4 , 600 mm, 300 mm
FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...
used
Model: TRC1500/600 Year: 2002 Condition: Used Serial Number: 1790 Stock Number: 3213 Belt width: 600 mm Transport length 1500 mm Power: 3 x 400V, 50Hz, 0.09kW Dimensions: 1600 x 850 x 1000 mm Weight; 135 kg
Unused Alfa Laval disc centrifuge type HBPX 6000. Year of manufacture 2023. CE The centrifuge has never been connected and has not worked on production.
CNC Deep Hole Drilling Machine Shinil (Korea) Year: 2009 Control: Fanuc Oi-TD Key Technical Specifications • Drilling diameter (solid): Ø 50 – 200 mm • Counter boring max: 500 mm • Trepanning max: 500 mm • Max drilling depth: 6000 mm (6 meters) Workpiece & Motion • Z-axis stroke (tool free): 6000 mm • Work spindle stroke (max): 4000 mm • Z-axis rapid feed: 5000 mm/min • Z-axis cutting feed: 0 – 1000 mm/min • Control axis: Z-axis CNC controlled Spindle & Speed Range • Headstock rotation: 5 – 30 rpm • Tool holder spindle speeds: • 50 – 500 rpm • 25 – 250 rpm • 16.6 – 166 rpm • 8.3 – 83.3 rpm Cooling & Drives • Coolant pump control: Inverter-driven • Motor control: NC controlled spindle & tool rotation Power & Installation • Total power: approx. 335 kW • Power supply: AC 440V / 60Hz ...
Diameter van de frontplaat: 700 mm minimale/maximale buisdiameter: 300 gt; 600 mm spindelsnelheid: 50 Hz: 12/23/45/85 tpm 60 Hz: 15/28/53/102 tpm beweging van turret: 180 mm Spindel beweging: 120 mm vermogen: 3,7 kW lengte: 2215 mm breedte: 1700 mm hoogte: 1400 mm gewicht: 2800 kg
Pastry line Seewer Rondo SPF 602 Condition: used, functional Year of Make: 2000 Calibration head, built in 1996 Cutting station Sprayer Filling station Guillotine Incl. cutting tools
Proofer Fortuna GEK AB 600 This system is currently still being repaired (pictures are from the bakery) Year of Make: 2012 Hangers for dough pieces up to max. 100 g (higher weights possible for elongated shapes) Working width: 600 mm Emptying time: 20 minutes at 15 cycles Fresh air supply: 3 axial fans Siemens Touch Control Adjustable hourly output and fermentation time Output height: approx. 950 mm External dimensions (L x W x H): 465 x 140 x 325 cm
Table 840 x 420 mm Travel X/Y/Z 600 / 410 / 520 mm, Spindle SK 40, speed up to 60001 rpm, Main drive 8.5kW, Tool changer 22 places Control Heidenhain TNC 370 incl. coolant device
CNC Machining Center Kunzmann WF 600 CNC Control: Heidenhain iTNC 530 Year of Make: 2014 Operating hours approx. 55 h Internal machine no. 52 Machine from training workshop / as good as new condition Travels: X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Mount: SK 40 DIN69871 Speed: 1 - 5,000 rpm Accessories - Probes - Vise - Tools
Used Schroder massing machine type MAX 600. Year of manufacture 2002. Acid-resistant design.
The machine is in good technical condition, testing is possible by prior arrangement.
Labeller for disposable syringes Manufacturer: Bausch & Ströbel Type SME 6005 This machine allows the insertion of labels (self-adhesive labels), as well as piston rods into disposable syringes. Capacity 6000 syringes/h Volume of syringes 0.5 to 10 ml Diameter of syringes 7 to 17 mm Label dispenser LAETUS Control Camera
Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm
Key data: 6020 mm, 1 mm
with hand lever control, manual roller shears, robust and easy to operate Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is being carried out Working length: 6020 mm Sheet thickness steel: 1.2 mm Sheet thickness aluminium: 1.5 mm Colour: green Total power requirement: 1.5 kW Dimensions: 6600 x 1700 mm Machine weight: 1800 kg with roller scissors Bending angle (max.): 135 degrees Insertion depth: 960 mm Upper beam stroke: 140 mm Maschinennummer/machine number 6961
Centrifuge / centrifuge for deoiling or dewatering Including control cabinet (different speeds), separation basin with 2 pumps, Automatic lid lock (safety lock) Functional
Size: 750 Ã 1050 mm Equipments: Load capacity max. 600 kg Platform size: approx. 750 Ã 1050 mm Power connection: 380 V/50 Hz
Transnorm belt conveyor GF 3250-700-600 RA2470 Technical data: Conveyor length (NL): 3250 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0.5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3250 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 scope of delivery: without support ...
Okta 6000 - New und with Motor Okta 1000 - neu without Motor 1. Pfeiffer Vacuum Okta 6000The Pfeiffer Vacuum Okta 6000 is a Roots vacuum pump (also known as a Roots blower or vacuum booster). It is designed for industrial applications that require high pumping speeds in low and medium vacuum ranges.Primary Function: It acts as a "booster" to increase the pumping speed of a vacuum system, usually paired with a backing pump (like a rotary vane or screw pump).Performance: It has a nominal pumping speed of approximately 6,000 to 7,300 m³/h. Find more here - / Contact us at -
Sheet metal cleaning machine KD Putz Tubur 600 for 2 edge trays - Sheet metal cleaning machine with brushes - Manufacturer: KD Bakery Equipment - Type: Tubur 600 - 1.1 kW
MIWE rack oven Baking tray size 60x 80cm Control: Analog control Heating: Oil / gas burner also possible Stove is sold as is. When it was dismantled from the bakery, the oven was still in operation.
A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible.
The machine is in good technical condition, testing is possible after prior agreement. Control system: OKUMA OSP-P200MA Power consumption: 58 kVA Travel length in X axis: 1000 Travel length in Y axis: 900 Travel length in Z axis: 1000 Description: 4 axes Weight: 26 t SPACE OCCUPATION: 3.3 x 6.5 m Tool magazine capacity: 100 Tool clamping system: BT50
Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface
Metal detector piano Dimensioni piano rilevamento: 600 x 480 x 60 mm
scheda gestione robot pressa Sandretto Automata 6000100831 da magazzino ricambi no smontaggio
Metal detector piano Dimensioni piano rilevamento: 640 x 480 x 60 mm
Metal detector piano Dimensioni piano rilevamento: 640 x 480 x 60 mm
Gruppo valvola proporzionale 0 811 404 607 + 0 810 090 107 + 0 811 404 302
Estrazione materiale: contenitore con foro per aspirazione
Gruppo servovalvola/valvola proporzionale Bosch 0 811 404 607 + 0 811 404 397
Excellent condition - Fully operational - Loading / Transport possible! motor 15 kW, shaft width 600 mm, shaft depth 800 mm, rotor
Key data: 600 mm, 450 mm, 300 mm
Röders 3-Axis High-Speed Machining Center 3-Axis High-Speed CNC Machining Center A proven performer in industrial milling, this 1999 Röders RFM 600/2 delivers reliable 3-axis high-speed cutting designed for precision tooling and mold making. Technical Details 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RFM 600/2 Year of manufacture: 1999 Machine number: 88194-80 2. Operational parameters Travel (X / Y / Z): 600 / 450 / 300 mm Table size: 700 x 550 mm Max. table load: 800 kg Spindle speed: 42,000 rpm Spindle motor power: 14 kW Feed rate: 0 – 30,000 mm/min Rapid traverse: 30 m/min Tool changer: 18-position Operating hours: approx. 108,888 h Spindle hours: approx. 18,625 h Control: Röders RMS6 Connections (Electrical): 400 V; 20 kVA 3. Weights Total machine weight: approx. 52 ...
This 3-axis HOFLER HF 600 was manufactured in 2010. It is designed for precision machining and offers advanced capabilities for various applications. If you are looking to get high-quality machining capabilities, consider the HOFLER HF 600 machine we have for sale. Contact us for further details.
: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 € : 284.16 € : 1 : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 80 mm : 1600 mm : 1550 mm : 2000 mm : 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis Mazak VARIAXIS C 600 was manufactured in 2022. It features a table size of 730 x 450 mm and impressive travels of 650 mm in the X-axis, 550 mm in the Y-axis, and 530 mm in the Z-axis. The machine is equipped with a spindle speed of 18,000 rpm and a tool magazine that holds 60 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS C 600 vertical machining centre we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
1.500 € 
