taiwan used for sale

Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of Make: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Tapping (steel/casting): M25 / M38 Projection (column to spindle centre): 330 – 1,230 mm Headstock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 levels (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Boom height adjustment: 620 mm

bore capacity in steel (diameter): 32 mm arm length: 640 mm workpiece height max.: 950 mm bore capacity in cast iron: 50 mm threading: . spindle taper MT: 4 turning speeds: 88-1500mm (6x) U/min Feed: mm/U surface area: mm total power requirement: kW weight of the machine ca.: t Max. spindle-to-table distance: 950 mm Min. spindle-to-table distance: 220 mm Quill stroke: 220 mm KW: 1.5 Volts: 380 Machine number: 9028 Included: Clamping cube 600 x 445 x 380 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You c ...

FOR SALE... TAIKO TWO ROTOR SCREW PUMP TO WHOM IT MAY CONCERN WE VE NEW UNUSED TAIKO CSL-600 TWO ROTOR SCREW PUMP AT OUR STOCK THIS PUMP KEEPED AS SPARE PUMP AT TANKER VESSEL. PLS FIND SPEC AT BELOW. SERIAL NO.: NO. A1K6369 TYPPE: CSL-600 CAP: 560 m3/h REV: 1300MÄ°N POWER: 400PS DATE OF MANUFACTURE: NOV 2006 PUMP IS READY TO TRANSPORT AT WARE HOUSE. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Abu Ugurluba Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: 90 232 618 03 85 Mobile: 905556084850aliagamarine.com TURKEY

1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).

HAISHU CNC550T 4-axis CNC Lathe Producer- Taian HAISHU Machinery Co. Ltd YOM 2015 Condition- Never used Equipped with two spindle and an additional lower turret with 12 tools, providing automatic two-way processing of the workpiece in the achievement of maximum processing speed. Control CNC GSK988TD Additional Y axis Max. working length 750 mm Maximum turning diameter over bed 550 mm Maximum turning diameter pallet 500 mm Spindle type А12 Hydraulic Jaws: 2x 300 mm Front spindle bore taper 1:20 Spindle pass 75 mm Speed of Servo spindled 0-4000 mm/min Axis X/Z/B Quick moves 40 000 mm/min CS1, CS2 power of main motors: 15 kW Engine motor on axle C- 5.5 kW Moment by Axis X/Z: 15 Nm Movement on Y axis: + 55/-55 mm; Moment on axis B: 20 N. m; Time to change tool 1.6 sec Positioning accuracy 0.005 mm Moves on axes X1/X2- 350 mm Moves on axes Z1/Z2- 1100/1350/1850 mm ...

Code: 0395 Brand: JOWAY - TAIWAN Model: P - 3200 TA - CE Standard Panel saw with tilting blade and scoring unit for precise cutting of panels, furniture, doors, window and door frames, kitchens, plastics, composite materials and various – CE Standard Technical data: Anodised aluminium caqrriage length 3200 mm Dimensions of ground steel table mm 620 x 1000 Blade diameter 350 mm Hole 30 Max cutting height at 90° mm 100 Max cutting height at 45° mm 70 Motor power 7,5 Hp Speed rpm 3000/4000/5000/6000 Scoring unit blade diameter 120 mm Hole 22 - Motor power 1 Hp Dual control panel for machine start-up Electric blade lifting Programmed blade tilt Electrically adjustable scoring unit Parallelogram blade guard Overall dimensions of assembled machine mm 3200 x 3400 x 1400 h Overall dimensions for transport mm 3200 x 2100 x 1400 h Weight kg 1300

Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Qty. 1 Second hand aluminium extrusion press line Mfc.: Taiyuan Force: 5000 MT Type: Front loading – single action Built: 2007 Stopped in 2016 Product weight: max. 55 kg/m Billet dia.: 279 & 406 mm (11” & 16”) Length: 600 - 1200 mm Consist of: Cold billet saw Gas heated billet furnace Extrusion press Run-out table Platen saw Quenching device Single puller Stretcher Finishing saw Dies heater

Absolute encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver -Manufacturer: Astec Taiho, Magnetic Encoder unused OVP -Type: JR205 D1200CAF -Voltage: 10-30 VDC -Quantity: 1 piece available -Dimensions box: 125/80/H50 mm -Weight: 0.2kg

: neu : ca. 6 Monate ab Auftragse : Taiwan : 30100 € : 574.91 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 3966 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 12480 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENC ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 51700 € : 977.13 € : 65 mm : MK 5 : 440 - 1.580 mm : 40 - 1.920 (12) U/min : Stahl/Guß: M50/M60 : 2850 mm : 1400 mm : 2940 mm : 4600 kg : 380 - 1.600 mm : 0,07 - 0,96 (6) mm/min : 5.5 kW : 432 mm : 370 mm : 2.480 x 1.050 x 210 mm : 1,5 kW : 700 x 500 x 400 mm : 3170 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of Log ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 21300 € : 408.96 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 635 x 520 x 415 mm : 2530 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 39200 € : 748.72 € : 50 mm : MK 5 : 350 - 1.600 mm : 56 - 1.450 (12) U/min : Stahl/Guß: M40/M50 : 2670 mm : 1120 mm : 2410 mm : 3300 kg : 465 - 1.420 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 320 mm : 270 mm : 2.550 x 970 x 200 mm : 1,5 kW : 630 x 500 x 500 mm : 2760 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 16900 € : 324.48 € : 32 mm : MK 4 : 220 - 950 mm : 73 - 1.247 (6) U/min : Stahl: M 25, Guss: M 32 : 1800 mm : 830 mm : 2190 mm : 1250 kg : 350 - 1.210 mm : 0,05 - 0,15 (3) mm/min : 1.5 kW : 210 mm : 220 mm : 1.260 x 640 x 160 mm : 0,75 kW : 600 x 445 x 380 mm : 2320 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BOTTLES & JARS!

YEAR 2012 STROKES X, Y, Z: 800X610X600 MM SPINDLE DISTANCE TABLE 150-720 MM FAST 36 M/MIN SPINDLE BT40 RPM 10,000 (12,000) RPM 30-SEATER TOOL WAREHOUSE CNC FANUC 18I-MD CHIP EVACUATOR ADDUCTION AT HIGH PRESSURE SPINDLE CENTER N ° 2 REVOLVING TABLES WITH ROTATING COUPLING FOR HYDRAULIC CONNECTIONS WITH LOCKING EQUIPMENT.

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 22 mm -Stroke: 700 mm -Dimensions: 118/71/H915 mm -Weight: 10.9 kg

Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder comes from a Hitchi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 50/50/H720 mm -Weight: 4 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 44/44/H595 mm -Weight: 3.1 kg

B&A REF: 9275 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 451 STROKE VOLUME: 475CM3 INJECTION PRESSURE: 1741AR PLATEN SIZES: 780 X 780MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 440MM MAX DAYLIGHT: 940MM EJECTOR STROKE: 130MM CONTROLS: VPC 20000E AIR VALVES: 1 HEATING CAPACITY: 12.9KW

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg

  - Build with double hirth coupling - T slot 22 with Jump off 200 mm - Diameter off center hole 50 mm

sheet width: 1015 mm plate length: 1015 mm plate thickness: 6,0 mm Punching capacity: 25 t punch diameter: 88,9 mm total power requirement: 16 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal - Operating instructions (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STRAUTMANN BALE TAINER, This particular vertical press has a storage space which allows to make multiple bales, automatically., 60 Ton, Materials: Paper, cardboard, PET bottles, film, Total installed power 11 kw, Drive power 5,5 kw, height of input point 1.370 mm., inpout point width 1069 mm, Balke size LxWxJ 1,1 x 1,1 x 0,9 mt., 3 panes, weight up to 400 kg. (3 disks), 4 -tie vertical bindings, Constructed in 2012, Good working conditions, Total dimensions: LxWxH 6,355 x 2,056 x 2,756, Weight 7.050 kg ca, installed power - used power in work: about 60-65% : 11

\" General Description Curtain-side rigid cargo truck manufactured by Iveco , model Eurocargo 160-280 . Configured for commercial freight and distribution transport with curtain-sided body and rear hydraulic tail lift. Technical Details Manufacturer: Iveco Model: Eurocargo 160-280 Machine type: Curtain-side cargo truck First registration: 27/07/2017 VIN: ZCFA71MM202668639 Fuel: Diesel Power: 207 kW (approx. 280 HP) Emission standard: Euro VI Axle configuration: 4×2 Transmission: Manual Gross vehicle weight: 16,000 kg Odometer: 820,022 km Operating hours: 13,169 h Curtain-side / tarpaulin cargo body Dhollandia DHLSU11 hydraulic tail lift Tail lift capacity: 2,000 kg Tail lift platform height: 2,650 mm Tail lift load centre: 1,000 mm Condition Used commercial condition with wear consistent with age and mileage. Equipped with a new cardan shaft including new beari ...

Technical details Type: Professional dress form set / tailoring mannequins Configuration: - Female torso dress forms - Full-body fitting mannequin - Lower-body fitting form with legs - Traditional tailoring torso on stand - Foam dress form - Rolling bases and support stands - Garment support accessories Visible brands: - Stockman Paris - Antonella Estimated quantity: Approx. 7 dress forms/mannequins Accessories included: - Adjustable hanging stand - Garment rail/support stand - LED work light on tripod Application: - Pattern making - Garment development - Tailoring and alterations - Fashion prototyping - Sample-room production - Draping and fitting operations - Fashion design training Condition: Used, good condition Observed condition: - No visible structural damage - Stands appear complete - Professional studio and tailoring equipment - Light storage dust ...

MAN LE 220 C 12.225 LLC 4x2 curtainsider truck – Dhollandia tail lift – 2002 Specifications: Brand: MAN Type: LE 220 C / 12.225 LLC First registration: 17-09-2002 Chassis number: WMAL73ZZZ3Y105615 Mileage: approx. 495.281 km, read Engine: 6,871 cc 6-cylinder diesel engine Power: approx. 162 kW / 220 hp Emission class: Euro 3 Transmission: ZF 6-speed manual Configuration: 4x2 Wheelbase: approx. 5,470 mm Tyre Size: 265/70 R17.5 Front suspension: leaf spring suspension Rear suspension: air suspension Permissible total weight: 11,990 kg Tare weight: approx. 7,000 kg Payload: approx. 4,990 kg Total dimensions: approx. 9.72 x 2.50 x 3.75 m Dimensions of cargo space: approx. 7.90 x 2.45 x 2.55 m (L x W x H) Cargo space capacity: approx. 49 m³ Load floor height: approx. 0.86 m Tail lift: Dhollandia hydraulic Tail lift capacity: approx. 1,500 kg Features: Cur ...

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: Center height 83-175 mm adjustable/swivelling -Type: 36642.M31 -Dimensions: see photos -Dimensions: 280/220/H270 mm -Weight: 12.1 kg

Renault Premium 410 DXi 4x2 curtainsider truck – swap body – Dhollandia 2.000 kg – 2009 Specifications: Brand: Renault Trucks Model: Premium 410 DXi Type: 24APD4 Date of registration: 24-04-2009 VIN: VF624APD000002061 Mileage: approx. 1,175,514 km, read Engine: DXi 11, 6-cylinder diesel Displacement: approx. 10,837 cc Power: 302 kW / approx. 410 hp Emission class: Euro 5 Drive: 4x2 Transmission: manual Permissible total weight: 19,000 kg Tare weight: approx. 8.200 kg Gross Combination Weight: 44,000 kg Maximum front axle load: 7,100 kg Maximum rear axle load: 13,000 kg Superstructure: curtainsider curtainsider change construction Dimensions of the body: approx. 7.00 x 2.55 x 2.80 m (L x W x H) Mounting surface-mounted: manually operated twistlocks Tail lift: Dhollandia DH-SV10 slider tail lift Tail lift construction date: 01/2009 Lift capacity: 2,000 kg a ...

Volvo FL 240 4x2 refrigerated truck – Carrier Viento – Dhollandia 1,500 kg – 2012 Specifications: Brand: Volvo Model: FL 240 Type: FLL42 N2 5.0 E5 First registration: 06-01-2012 VIN: YV2TN12A4BB602570 Mileage: approx. 769,366 km, read Engine: 7,146 cc 6-cylinder turbodiesel Power: 181 kW / approx. 246 hp Fuel: diesel Emission class: Euro 5 Drive: 4x2 Transmission: Automated Wheelbase: approx. 5,600 mm Total length: approx. 10,435 mm Maximum authorized mass: 11,990 kg Mass ready to drive: approx. 8,118 kg Calculated payload: approx. 3,872 kg Freezer compartment: approx. 4.50 x 1.05 x 2.50 m (LxWxH) Freezer compartment capacity: approx. 11.8 m³ Features: Insulated box body with separate freezer compartment Carrier Viento refrigeration/freezer installation with cab control Dhollandia DHLM.30 hydraulic tail lift, lifting capacity 1,500 kg Tail lift: ap ...

Hydraulic tailstock top height 150 mm - 2 stub More: Hydr. Tailstock

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Ramo a42 lathe -Quill: electrically driven -Motor: 220/380 V 0.18 kW -Spindle stroke: 300 mm -Recording: MK4 -Dimensions: 790/550/H580 mm -Weight: 98 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 101 mm -Dimensions: 85/123/H118 mm -Weight: 4.5 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: adjustable from 75 to 180 mm -Recording: MK2 -Dimensions: 275/240/H260 mm -Weight: 22.5 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 99 mm -Dimensions: 180/92/H144 mm -Weight: 4 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 110 mm -Dimensions: 218/117/H190 mm -Weight: 11 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 155 mm -Dimensions: 100/120/H182 mm -Weight: 5.5 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock comes from a lathe -Peak height: 145 mm -Recording: MK4 -Dimensions: 410/260/H320 mm -Weight: 51 kg

Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock comes: from a lathe -Tip height: 180 mm -Recording: MK4 -Dimensions: 540/250/H310 mm -Weight: 65.5 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: 130 mm -Recording: MK2 -Adjustment of tip from center: - 25 mm -Dimensions: 240/210/H160 mm -Weight: 7 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Bores for guide: Ø 30 mm -Dimensions: 170/200/H110 mm -Weight: 4 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 95-205 mm adjustable -Recording: MK2 -Dimensions: 275/260/H265 mm -Weight: 23 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: 145 mm -Recording: MK2 -Dimensions: 220/190/H150 mm -Weight: 6.5 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 135 mm -Admission: -Dimensions: 165/300/H190 mm -Weight: 8 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 250 mm -Dimensions: see drawing in the photos -Dimensions: 285/180/H280 mm -Weight: 21.6 kg

tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 150 mm -Dimensions: see drawing in the photos -Dimensions: 210/105/H240 mm -Weight: 7.0 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: for dividing head -Shaft: Ø 50 x 515 mm -Dimensions: see photos -Dimensions: 645/90/H200 mm -Weight: 7.8 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 150 mm -Dimensions: see photos -Dimensions: 340/200/H260 mm -Weight: 20.4 kg