taiwan takisawa used for sale

This OKUMA GENOS L2000-e Lathe was manufactured in the year 2018 in Taiwan. It is equipped with a OKUMA OSP P300L-R control unit. The machine has a spindle speed of 107-4500 rpm.

This TAKISAWA TA 25Y Lathe was manufactured in the year 2008 in Japan and has 8000 production hours. It is equipped with a FANUC Series i8T control unit. The machine has a spindle speed of 12000 rpm.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50300 € : 2540 mm : 3.5 mm : 135 ° : 3,7 kW : 3850 mm : 1700 mm : 1860 mm : 3700 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules (sample photo showing model V-AMH 2535 2 axes NC control Schneider) OPTION: 2 axes NC control Schneider touchscreen incl. motorized back gauge 800 mm € 15.800,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 38100 € : 2035 mm : 4.5 mm : 135 ° : 5.5 kW : 3300 mm : 1550 mm : 1900 mm : 3200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 40.300,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.000,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42400 € : 2540 mm : 4.5 mm : 135 ° : 5.5 kW : 3900 mm : 1700 mm : 1900 mm : 5100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 45.100,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.600,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50800 € : 3100 mm : 6.5 mm : 135 ° : 7,4 kW : 4500 mm : 1750 mm : 2050 mm : 6800 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 52.700,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 15.100,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Feeler FTC 350 LMC Lathe was manufactured in the year 2020 in Taiwan. It is equipped with a Fanuc Series Oi-TF control unit.

This Quaser MK603SP/12B Vertical Machining center was manufactured in the year 2011 in Taiwan. It is equipped with a Fanuc 18i-MB control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

This Quick Tech T8-Hybrid-YB Turning Milling machine was manufactured in the year 2021 in Taiwan. It is equipped with a Fanuc Series Oi - TF Plus control unit.

Machine Details Stock-No. 1105-03900 Type of machine Machining Center - Vertical Make KAFO Type Vmc 106 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details X-Travel 1020 mm Y-Travel 600 mm Z-Travel 635 mm CNC-control FANUC - IO table-size 1250 X 600 mm spindle taper ISO 40 spindle turning speed range 10000 rpm spindle drive motor 11 kW tool change unit 24 max. table load 1000 kg throat 510 mm voltage 380 V Rapid speed 12 m/min feed range 1 - 5000 mm/min Weight of the machine approx. 4.6 t dimensions of the machine approx. 3.2 x 2.70 x 2.70 m Accessories instruction book Additional information control: FANUC - O I MC - coolant equipment CHIP CONCOYER 10000 RPM

This Hurco VMX 50 S vertical machine center was manufactured in the year 2006 in Taiwan and has 44000 hours. It is equipped with a Hurco Ultimax control unit. It is equipped with Renishaw.

Turning diameter: 670 mm Turning length: 630 mm Turret positions: 0 CNC Brand: Fanuc CNC Lathe with y-axisTAKISAWA - NEX 908  Max. turning Ø:670mm X-Axis:        220mm Y-Axis:        100mm Z-Axis:        630mm Spindle bore:  52mm Speedrange:    5000Rpm Length:        3020mm Width:         1820mm Height:        2200mm Weight:        6000kg  

Key data: 1020 mm, 520 mm, 560 mm

Machine Details Stock-No. 1105-03908 Type of machine Machining Center - Vertical Make VICTOR Type VCENTER 102 A Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex site Price Technical details X-Travel 1020 mm Y-Travel 520 mm Z-Travel 560 mm control FANUC OI IMD table surface area 1100 X 510 mm turning speed range - milling 10000 rpm power capacity - milling spindle 15 kW tool taper BT 40 Tool changer 24 pos. max. tool diameter 125 mm max. tool length 250 mm max. tool weight 7 kg rapid traverse X-axis 24 m/min rapid traverse Y-axis 24 m/min rapid traverse Z-axis 20 m/min max. table load 800 kg Weight of the machine approx. 6 t Additional information Machining Center - Vertical VICTOR V 102 YEAR 2006 CHIP CONVOYER FANUC OIMD

: neu : 2023 : 4546 : prompt, Zwischenverkauf v : Taiwan : 39400 € : 807.7 € : 1 : 65 - 2600 U/min : ISO 40 : 420 x 220 x 380 mm : 840 x 390 mm : 2,2 kW : 1145 kg : 840 x 390 mm : 1000 mm/min : 5 : 14 x 63 mm : 200 kg : 420 mm : 220 mm : 380 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 65 - 2600 : 90 - 310 mm : 65 - 2600 : +/- 90° ° : 100 mm : manuell : 2,2 kW : 950 x 250 mm : 90 - 310 mm : 100 - 480 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spi ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 109510 € : 600 mm : 400 mm : 400 mm : 225 mm : 400 mm : 50 kg : 450 mm : 500 - 2200 1/min : 5,5 kW : 19 kW : 2800 mm : 2800 mm : 2610 mm : 3400 kg : Dm. 355 x 38 x Dm. 127 mm : 0 - 3000 mm/min : 0,001 mm : 1.7 kW : 2.4 kW : 0.005 mm : 0.003 mm iSurface control with 10,4", touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard linear scale Fagor (0,001 mm) for downfeed axis electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English ALTERNATIVE: model version FRG-400S with Sm ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 120910 € : 600 mm : 600 mm : 600 mm : 325 mm : 600 mm : 205 kg : 450 mm : 500 - 2200 1/min : 5,5 kW : 19 kW : 2800 mm : 2800 mm : 2610 mm : 3500 kg : 820 mm : Dm. 355 x 38 x Dm. 127 mm : 0,001 mm : 1.7 kW : 2.4 kW : 10 - 150 1/min : 0.005 mm : 0.003 mm iSurface control with 10,4", touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard linear scale Fagor (0,001 mm) for downfeed axis electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English ALTERNATIVE: model version FRG-600 ...

This Hurco VMX30 Vertical Machining center was manufactured in the year 2000 in Taiwan. It is equipped with a Hurco Ultimax control unit. The machine has a spindle speed of 10-10000 rpm.

Key data: 500 mm, 250 mm, 400 mm

Machine Details Stock-No. 1105-03925 Type of machine milling machining centers - universal Make AKIRA SEIKI Type RMV 250 RT 5 AXIS Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock Dreieich Technical details X-Travel 500 mm Y-Travel 250 mm Z-Travel 400 mm table-size ROUND TABLE 250 mm spindle taper ISO HSK 63 spindle turning speed range 45 - 12000 rpm spindle drive motor 11 kW tool change unit 24 CNC-control FANUC OIMD voltage 380 V max. table load 200 kg Throat 380 mm total power requirement 17 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 3.5x 2.5x 2.60 m Additional information AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment TROUGHT THE SPINDLE 20 BARS CGIP CO? VOYER 5 AXIS MACHINE IN GOOD CONDITION

Stable milling machine - Made in Taiwan - New - unused 3 Axis Digital Display - Heidenhain Scales Electronic handwheel for driving machine ashes by hand Tool spindle vertical and horizontal Tool holder steep taper 50 Max. spindle speed 1,600 rpm Travel X 1100 mm Travel Y 720 mm Travel Z 780 mm Table clamping surface 1500 x 450 mm Max. workpiece weight 1000 KG Rapid traverse of the machine axes 6000 mm/min Infinitely variable axle feed can be adjusted via potentiometer Coolant system Chip protection on the router table

Ref. -No.: 10319 Manufacturer: TAKANG Type of control: Digitalanzeige ACU-Rite Control: Konventionell Storage location: Halberstadt Country of origin: Taiwan Weight Of The Machine Ca.: 1,3 t Swing diameter over bed: 430 mm Bed width: 300 mm Tip length: 1500 Centre Height: 215 mm Bed length: 1600 mm

Ref. -No.: 10036 Manufacturer: JOHNFORD Year of construction: 2009 Type of control: CNC Control: Fanuc Series 18i-TB Storage location: Halberstadt Country of origin: Taiwan Machine length: 9800 mm Machine width: 3695 mm Machine Height: 5292 mm Weight Of The Machine Ca.: 32,6 t amount of positions: 12 Bar passage: 165 mm Serial no.: TDF9007 Turning Length: 2000 mm Turning Diameter Over Bed: 1550 mm Swing Diameter Over Bed Slide: 1270 mm Longitudinal Travel (Z-Axis): 2000 mm Spindle Head: A2-15 Spindle Diameter In Front Bearing: 240 mm Spindle Bore: 185 mm Spindle power: 37/30 kW Cross Travel: 685 mm Spindle Speeds: 1000 RPM Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 12 m / min Tool changer: 12 Pcs

This DAH LIH MCV-720 Lathe was made in the year 2019 in Taiwan and has only 505 working hours. It is equipped with a Fanuc Series Oi-MF control unit. The machine has a spindle speed of 10000 rpm. It includes a set of XYZ axes, 28 instrument holder cones, and a Haimer 3D Edge Finder.

This First V700 Vertical Machining center was manufactured in the year 2013 in Taiwan. It has 3+1 axis. The machine has a spindle speed of 10000 rpm.

This Hurco VMX 84t Vertical Machine Center was made in Taiwan in the year 2008. It is equipped with an Hurco WinMax control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

Ref. -No.: 10265 Manufacturer: PROTH Type of control: Konventionell Storage location: Halberstadt Country of origin: Taiwan Serial no.: 0011G-05 Max. Grinding length: 600 mm Grinding Width: 300 mm Workpiece Height: 312 mm Travel X: 700 mm Travel Y: 340 mm grinding wheel dimension: 355 x 25 x 127 mm

: neu : ca. 6 Monate ab Auftragse : Taiwan : 66760 € : 1341.88 € : 600 mm : 600 x 300 mm : 610 mm : 600 x 300 mm : 420 kg : 700 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 350 mm : 0.001 - 32 : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2000 1/min : 5,5 kW : 0.75 kW : 1.1 kW : 1.1 kW : 2710 mm : 2428 mm : 2200 mm : 3500 kg : 975 mm : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment with diamond, with compensation device _FULLY ENCLOSED SPLASH GUARD PROTECTION OF WORKING AREA_ grinding wheel grinding wheel flange grinding  ...

This WELE AA1165 Vertical Machining center was manufactured in the year 2014 in Taiwan. It is equipped with a Fanuc control unit and has 3 axis. The machine has a spindle speed of 15000 rpm.

This QUICK-TECH Q5 Milling center was manufactured in 2018 in Taiwan. It is equipped with a Mitsubishi M80 control. This turning machine has a table size of 620 x 420 mm with a max. table load of 250 kg. The clamp type is BT30. The machine is still under power and can be inspected at any time. There are 4 units available of the same model and YOM at the same location.

: neu : 2024 : 8310 : : Taiwan : 45500 € : 923.65 € : 2035 mm : 3.5 mm : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2200 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 850 , 550 , 150

Das Zentren nicht benutzt (Die Pandemie Änderte die Pläne). Das Zentren wurde im Jahr 2020 nach Deutschland gebracht. Accuway Misteiner der besten Hersteller in Taiwan. der Maschinen in die ganze welt liefert Controller Fanuk 0i Spindle speed 10000 rpm Spindle nose taper BT40 Bearing inner diameter 70mm drive system Belt (Direct) X-axis travel 850mm Y-axis travel 550 mm Z -axis travel 150-700 mm Table dimension 1100x600 mm T-slot 5x18x100 Max. weight on table 1000 kg FEED RATES X-axis travel 30 m/min Y-axis travel 30 m/min Z -axis travel 30 m/min Cutting feed rate 12 m/min AUTOMATIC TOOL CHANGE SYSTEM tool magazine capacity 24 pcs Max tool weight 7 kg Max tool diameter 75 mm Max tool length 300 mm Method of tool exchange Arm type  ...

Apec G30/20 5 axis bridge machining center Simultaneous Travel: Feed rate: X axis travel 2000 mm X/Y/Z axis rapid traverse 60/60/40 m/min Y axis travel 3000 mm X/Y/Z axis acceleration 0.5G Z axis travel 1000 mm Cutting feed rate 1-20,000mm/min spindle nose to table surface 330-1330 mm Table: Spindle: (APEC MONO SUPPORTING HEAD) Table size 2,000x3,000 mm Spindle taper HSK 63A Table load 8000 kgs/m2 Spindle speed 24000RPM T-slot size 28 mm Spindle motor (S1) 25/30 KW ATC: Spindle torque (S1) 119/143 NM Capacity 20 pc 2 axis head A-Axis C-Axis Tool shank HSK 63A Rotation speed 30 rpm 30 rpm Max. tool weight 15 kgs Max. torque 760 Nm 800 Nm Max. tool dia. (w. adjacent tool) 150 mm Clamping torque 4000 Nm 4000 Nm Max. tool dia. (w/o adjacent tool) 180 mm Rotation angle ± 125∘ ±360∘ Max. tool length 300mm Others: Machine Weight 39000kgs (around) Mo ...

Takisawa NEX-110Y CNC Lathe Number of working hour 301(November 2023) Machine is like new C axis Maximum turning diameter : 560 mm Standard turning diameter : 244 mm Maximum turning length : 635 mm Fanuc control unit X axis : 220 mm Z axis : 710 mm

Takisawa FX-600 Dual Spindle CNC Lathes C/Y Axis Chuck:6-6 Machine is in good working condition More details about model: https://www.takisawa.tw/en/product-lsseries.php?id=MTUxMTMzOTkzNQ&type =cat&method=first

CNC milling machine with manual tool change. Designed for milling and engraving workpieces made of solid wood, chipboard, MDF and materials with similar physical properties along the plane (2D milling), as well as artistic milling in 3-dimensional space (3D milling). Manufacturer Vanguard Working field 1300 x 2500 x 200 mm Electrospindle power 6 kW Inverter 7.5 kW Electrospindle speed 18000 rpm Feed speed 50 m/min. Milling speed 25 m/min. Clarity of drawing 0.025 mm Width of linear guides 25 mm (Y), 20 mm (X, Z) Operating voltage 380V 3 phase 50-60 Hz Equipment: DSP controller steel portal Vortex vacuum pump 7.5 kW Separate vacuum clamping system with 6 zones Tool length calibration sensor Drive ball screw pair manufactured by ATLANTA (Germany) Rack-and-pinion drive manufactured by WMH (Germany) Prismatic guides manufactured by HIWIN (Taiwan) Manual central lubricati ...

This Excetek V650G Erosion machine was made in 2016 in Taiwan. The machine has a wire diameter of 0.15~0.3 mm.

This JS EDM Wi-200s Erosion machine was manufactured in the year 2018 in Taiwan. It is equipped with a JS EDM control unit and has 5 axis.

This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator.

Extrusion line for blowing polymer films of type ABA, MODEL 2L800 Manufacturer RUIAN AOXIANG PACKAGING MACHINERY CO., LTD 2017 onwards Specifications 1. Film thickness: 0.01 - 0.1 mm; (Thickness: 8%) 2. Maximum film width: 800 mm 3. Recyclable materials: LDPE + CaCO3, PND + CaCO3, linear LDPE; CaCO3 content - maximum 40% 4. Maximum performance: 100 kg / h; 5. Dimensions (L x B x H): 6000 x 3700 x 6500 mm; 6. Weight: 4.5 t; 7. Main power: 70 kW; 8. Certification: CE European Compliance Certificate, SGS Independent Examination Certificate, National Compliance Certificate of China GB4455 Data sheet 1. Extruder (2 sets) 1.1 auger diameter: 55 mm 1.2 Ratio of length to diameter: 30: 1 1.3 Maximum screw rotation speed: 100 rpm. 1.4 Type of screw: mixed type, with a barrier 1.5 The material of the auger of the cylinder: 38CrMo (American certificate of protection of inventions  ...

Spindle power: 3.7/7.5kW, max. rotational speed: 5000/min, controls: Fanuc Series 0i-TF, length: 2560mm, width: 2512mm, height: 2145mm, weight: 4.3t, operational hours counter: 8923h, with documentation.

Key data: 1520 mm, 760 mm, 610 mm

machine details Stock-No. 1105-03957 Type of machine Machining Center - Vertical Make LEADWELL Type V 60 Year of manufacture 2006 Type of control CNC Storage location FRANCE HAGUENAU Country of origin Taiwan Delivery time CALL ME Freight basis EX WORK Technical details x-travel 1520 mm y-travel 760 mm Z-Travel 610 mm Dist. Milling Spindle - Table Surface 150 - 760 mm Table dimensions 1680 X 750 mm table load capacity 1200 kg Spindle motor 15 kW Spindle Speed: 10000 rpm spindle taper BT 40 Rapid traverse 20 m/min tool change unit 24 places Weight of tools max. 14 kg CNC Controller: Fanuc 18 imb total power requirement 30 KVA weight of the machine approx. 9 t Additional information - In Excellent condition - With machien documents - Rigid taping -WITH GOLDEN SUN 5 AXIS

Key data: 1650 mm, 850 mm, 790 mm

Machine Details Stock-No. 1105-03958 Type of machine Machining Center - Vertical Make kafo Type WMC 1675 Year of manufacture 1990 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time CALL ME Freight basis EX WORK Price Technical details x-travel 1650 mm y-travel 850 mm Z-Travel 790 mm Dist. Milling Spindle - Table Surface 150 - 760 mm Table dimensions 1900 X 850 mm table load capacity 1500 kg Spindle motor 15 kW spindle speed: 6000 2 STEEP spindle taper BT 40 Rapid traverse 20 m/min tool change unit 24 places Weight of tools max. 14 kg CNC Controller: Fanuc 15M total power requirement 30 KVA weight of the machine approx. 14 t Additional information - In Excellent condition - With machien documents - Rigid taping -fanuc oM

Key data: 1020 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03962 Type of machine Machining Center - Vertical Make BEMATO Type BMT 1020CJ Year of manufacture 2003 Type of control CNC Storage location HAGUENAU Country of origin Taiwan Delivery time IMMIDIATELY Freight basis EX WORK Price Technical details x-travel 1020 mm y-travel 510 mm Z-Travel 610 mm table-size 1070 X 510 mm spindle taper BT 40 number of spindle speeds 80 - 8000 min-1 tool piece magazine with 20 seats total power requirement 20 kVA Additional information FANUC OMD CONTROL

DUGARD EAGLE 660 VMC CNC machining centre built in 2007 in Taiwan, is used for precision milling, drilling, threading, boring and reaming of workpieces with rotary tools. The machine, with its extensive machining capabilities, is distinguished by its extremely stable base, which provides rigidity and support for the guideways on which the X,Y,Z axes are guided. To ensure a high level of safety, specially designed sliding guards protect the operator from moving parts, coolant and workpiece fragments. All the processes, from tool selection to the machining cycle, are performed fully automatically by the milling centre. The implemented SIEMENS SINUMERIK 810 D CNC control minimises the operator’s handling of the machine, while the capacious 24-position magazine selects the shortest possible access path to the tool. This solution increases production efficiency while significantly reduci ...

Model: Trak DPM 750 Type: AEVF Serial No.: 513352 Controls: Proto Trak MX3, switchable to MX2 Travel: X, Y, Z 750 x 400 x 610 mm Table size: 1270 x 320 mm Weight: 1900 kg Year of construction: 1995 Country of origin: Taiwan

Series No.: 12661418 Year of construction: 10/1998 rpm: 65 – 2000 Cone: MK3 Country of origin: Taiwan

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

Key data: 450 mm, 350 mm, 380 mm

X-axis: 450 mm Y-axis: 350 mm Z-axis: 380 mm Work table: 700 x 320 mm Spindle speeds: 10,000 rpm. Spindle Adapter: ISO40 Tool changer: 12 places CNC Control: Siemens Shopmill Equipped with: - Spindle cooling - ISO40 tools -Vice Country of origin: Taiwan Motor power: 8.5 kW Machine LxWxH: 2450 x 1550 x 2200 mm Machine weight: 2000 kg

: neu : ca. 6 Monate ab Auftragse : Taiwan : 111210 € : 2213.08 € : 730 mm : 1.200 x 500 mm : 1200 mm : 1.200 x 500 mm : max. 30 m/min : 3.7 kW : 27 kVA kW : 4600 mm : 3040 mm : 2200 mm : 6400 kg : 990 mm : 930 kg : 1250 kg : 405 x 50 x 127 mm : 560 mm : 0 - 2.250 mm/min : 0,001 - 32 mm : 560 mm : 0 - 675 mm/min : 0,001 - 0,04 mm : 0,001 mm : 500 - 2.000 U/min : 11 kW iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm Max. table speed (X axis) 30 m/min vertical feed by ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42740 € : 867.62 € : 600 mm : 610 x 305 mm : 610 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 1.100 mm/min : 1 - 12 mm : 370 mm : 1.5 kW : 0.004 kW : 0.19 kW : 7,4 kW : 2670 mm : 1810 mm : 2050 mm : 2100 kg : 355 x 50 x 127 mm : 1.450 U/min : 3,7 kW : 4 mm : 0,02 mm : 0,002 - 0,04 mm : 2 mm : 0,01 mm : 330 mm/min : 0,2 mm : 0,002 mm control panel on swiveling arm aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad was created ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 33920 € : 688.58 € : 450 mm : 457 x 203 mm : 457 mm : 200 x 450 mm : 500 mm : 530 mm : 5 - 25 m/min : 960 mm/min : 0,4 - 6 mm : 0.75 kW : 0.004 kW : 0.19 kW : 3,7 kW : 2200 mm : 1575 mm : 1950 mm : 1320 kg : 203 x 12,7 x 31,75 mm : 230 mm : 2850 U/min : 1,5 kW : 240 mm : 4 mm : 0,02 mm : 0,002 - 0,04 mm : 2 mm : 0,01 mm : 330 mm/min : 0,2 mm : 0,002 mm control panel on swiveling arm aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad ...