taiwan takisawa used for sale

Granulator SHINI SG-1635 Production - Taiwan. Issue 2008. In working order. New set of knives Power - 2200W Frequency -50 hz source 3, 400V

JON WAI 230HPI23H injection molding machine Production - Taiwan. Issue 11.2007. Worker. Locking force 230 tons, Heater - 12,1 Kw horse power 60 HP

Machine Details Stock number 1105-037895 Machine type machining center - vertical Brand HURCO Type VMX 40 Year of construction 2000 Control type CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight base from site Technical details x-travel 1060 mm y-travel 508 mm z-travel 650 mm Working surface 1200 X 610 mm Motor power (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Tool changer 30 times Ultimax 4 Control Machine weight ca. 6 t Information HURCO VMX 40 BORN 2004 CNC ULTIMAX 4 Synchronous.Thread 8000 rpm SPAENEFOERDEREr

: neu : ca. 6 Monate ab Auftragse : Taiwan : 55600 € : 1112 € : 3100 mm : 2 mm : 1.2 mm : 135 ° : 5,5 kW : 4370 mm : 1770 mm : 1790 mm WITH VERTICAL UPPER BEAM MOVEMENT FOR THE USE OF FLAT AND HIGH TOP RAILS hydraulic driven NC control for bending angle manual back gauge 600 mm sharp flat upper rail 45° (in one piece) mechanical crowning adjustment clamping force adjustment upper beam vertical according to CE rules Optionen: sectionet upper rail, height 100 mm € 5.600,-- motorized back gauge, 800 mm with 2-axis touch control € 15.500,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 70300 € : 1406 € : 620 mm : 1.000 x 400 mm : 1.015 x 405 x 610 mm : 1015 mm : 400 x 1.000 mm : 1050 mm : 1100 mm : 5 - 25 m/min : 0 - 2,250 mm/min : 3 - 32 mm : 420 mm : 0.001 : 3.7 kW : 1.5 kW : 1 kW : 1 kW : 6,3 kW : 4280 mm : 1730 mm : 2080 mm : 3500 kg : 355 x 50 x 127 mm : 1.450 U/min : 0,001 - 0,04 mm : 675 mm/min : 0,001 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment with diamond, with compensation device grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 27100 € : 547.42 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

JON WAI 250 SD injection molding machine Production - Taiwan. Issue 2008. In working order. Locking force 250 tons Heater - 1802 KW Horse power - 40 HP The injection volume is 820 grams for polystyrene. Large diameter auger - 65mm.

SHUZ TUNG CNC 50 BRM CNC tube and profile bending machine built in 2014 in Taiwan allows for fully automatic, serial production of complex spatial workpieces in 5 axes with simultaneous hole punching. Excellent precision and accuracy of bending are guaranteed by the reliable servo motors used in the machine, which are responsible for realising the main working movements, i.e. bending, rotation and material feed. The rest of the movements are driven by a central hydraulic system with electronic lubrication. The SHUZ TUNG CNC mandrel bending machine is operated via a control panel with an installed CNC controller with the option of saving an unlimited number of programmes. In addition, the automatic servo bending machine is equipped with several bending rolls, a high-quality mandrel and an actuator to support material feed. The 50 BRM automatic CNC mandrel bending machine weighs 3500 kg ...

Takisawa NEX-108Y CNC Lathe Y and C axis 11/7.5 Kw spindle engine Takisawa A2-6 4000 rpm spindle Chip conveyor Maximum turning length : 431,5 mm Turning diameter : 260 mm Fanuc control unit Machine is like new

: neu : ca. 6 Monate ab Auftragse : Taiwan : 48700 € : 983.74 € : 65 mm : MK 5 : 440 - 1.580 mm : 40 - 1.920 (12) U/min : Stahl/Guß: M50/M60 : 2850 mm : 1400 mm : 2940 mm : 4600 kg : 380 - 1.600 mm : 0,07 - 0,96 (6) mm/min : 5.5 kW : 432 mm : 370 mm : 2.480 x 1.050 x 210 mm : 1,5 kW : 700 x 500 x 400 mm : 3170 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of Log ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 32200 € : 650.44 € : 50 mm : MK 5 : 350 - 1.600 mm : 56 - 1.450 (12) U/min : Stahl/Guß: M40/M50 : 2670 mm : 1120 mm : 2410 mm : 3300 kg : 465 - 1.420 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 320 mm : 270 mm : 2.550 x 970 x 200 mm : 1,5 kW : 630 x 500 x 500 mm : 2760 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 57670 € : 1153.4 € : 610 mm : 800 x 400 mm : 800 mm : 800 x 400 mm : 810 mm : 5 - 25 m/min : 0.74 kW : 10 kVA kW : 3540 mm : 2080 mm : 2100 mm : 2900 kg : 980 mm : 350 kg : 355 x 50 x 127 mm : 450 mm : 0 - 2.250 mm/min : 0,001 - 32 mm : 480 mm : 0 - 675 mm/min : 0,001 - 0,04 mm : 0,001 mm : 500 - 1.800 U/min : 3,75 kW : 1,1 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment accor ...

ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...

Takisawa NEX CNC Lathe and KUKA Robot Takisaw is from 2009 Robot is from 2013(KRC4 60 KG) Machine and robot can be seen in working condition

: neu : ca. 6 Monate ab Auftragse : Taiwan : 14600 € : 297.84 € : 32 mm : MK 4 : 220 - 950 mm : 73 - 1.247 (6) U/min : Stahl: M 25, Guss: M 32 : 1800 mm : 830 mm : 2190 mm : 1250 kg : 350 - 1.210 mm : 0,05 - 0,15 (3) mm/min : 1.5 kW : 210 mm : 220 mm : 1.260 x 640 x 160 mm : 0,75 kW : 600 x 445 x 380 mm : 2320 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 18300 € : 373.32 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 635 x 520 x 415 mm : 2530 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 , 610 , 610

Machine Details Stock-No. 1105-03805 Type of machine Machining Center - Vertical Make BRIDGEPORT Type HR 1000 Year of manufacture 2011 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details X-Travel 1000 mm Y-Travel 610 mm Z-Travel 610 mm control CNC FANUC OIMC Table surface area 1150 x 540 mm Rapid traverse 30/30/30 m/min turning speed range 12000 rpm power capacity - milling spindle 13 kW No. of tools in the magazine 30 pieces tool taper BT 40 Additional information CNC FANUC OIMC - Synchronised tappin - boxway system 3 axis - RS-232 interface mm)

Machine Details Stock number 1105-03814 Machine type machining center - vertical Make HARDINGE Type VMC 1000 II Year of construction 2001 Control type CNC Control FANUC 18 MB Storage location HAGUEANU FRANCE Country of origin taiwan Delivery time immediately Freight base from stock Price Technical details x-travel 1000 mm y-travel 510 mm z-travel 510 mm Control FANUC 18 MB Clamping surface table 1120 X 510 mm Table load - central/maximum 700 kg Tool holder SK40 Spindle speed: 24...8000 rpm Tool magazine with 20 SLOTS Information Equipment: Machine has CNC FANUC 18 M Machine can be demonstrated!

GENERAL Project No.: 905471 Quantity: 1 pcs. Manufacturer: TAKISAWA Type: TT 500 GD Control: Fanuc 0i TF Year of construction: 2018 Condition: Used machine Approx. (hrs) control: 22,918 Program run approx. (hours): 7.112 DESCRIPTION TURN turning diameter 50 mm turning length 50 mm 2 pcs. main spindle(s) – front loading speed main spindle 8000 1/min power main spindle at ED 10-40/100% 7.5/3.7 kW Spindle passage main spindle 37 mm Spindle diameter in front bearing Main spindle 80 mm Spindle flange size main spindle 80 F Travel in X/Z 250/300 mm rapid traverse speed in X/Z 20/24 m/min Full clamping cylinder on the main spindle Coolant supplied through the main spindle Pneumatic workpiece system control left and right Fixed block tool holder Number of stations/powered 5/0 ADDITIONAL EQUIPMENT Tool breakage monitoring Splash guard cladding with ful ...

LINK LABEL HOT FOIL STAMPING – SEMI ROTARY DIE CUTTING – LABEL FINISHING LINE Manufacturer: Link Label – Taiwan Year of Production: 12/ 2015 Type: ASR 320 D Max. Paper Width: 320 mm Max. printt length: 300 mm Max print width: 300 mm Max roll diameter: 500 mm Machine is servo driven – in production – Test possible Machine consist of: Unwinder with El Guider Web guide Hot foil stamping and embosing unit (flatbed) Flexo varnishing/printing unit (semi rotary) Screen printing unit (flat bed) Automatic Register control Equipped for Re Register Slitting unit UnwinderWaste RewinderScreen printing unit is also a Standalone unit. Please contact us for pricing or other information

Machine Details Stock-No. 1105-03850 Type of machine Machining Center - Vertical Make FEELER Type FV 1500 Year of manufacture 2000 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Price Technical details X-Travel 1500 mm Y-Travel 750 mm Z-Travel 750 mm tool taper BT 50 spindle drive 15 kW spindle turning speed range 6000 rpm tool change unit 32-speed BT 50 tool changing time 4 sec table-size 1700 x 750 mm table load capacity - central/maximum 1500 kp Rapid Travel X/Y/Z 24 m/min Feeds X/Y/Z -STEPLESS 20000 mm/min total power requirement 40 kVA Weight of the machine approx. 11 t Additional information CNC control HEIDENHAIN TNC 426 A.T.C. for 30 tools BT 50 COOLING TROUGHT THE SPINDLE 20 BARS TABLE 1700 X 750 15 KW 6000 RPM

: neu : ca. 4 Monate ab Auftragse : Taiwan : 46400 € : 951.2 € : 40 -3200 U/min : ISO 40 : 600 x 500 x 400 mm : 1000 x 500 mm : 3,75 kW : 1814 kg : 1000 mm/min : 8 : 14 x 63 mm : 300 kg : 600 mm : 500 mm : 400 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 40 - 3200 : 40 - 3200 : +/- 90° ° : 100 mm : manuell : 3,75 kW : 1200 x 250 mm : 160 - 660 mm : 95 - 495 (2. T-Nut), 180 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 3,75 kW feed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automati ...

Machine Details Stock-No. 1105-03852 Type of machine milling machining centers - vertical Make DAH LIH SONGS Type LIEDER MCV 2600 Year of manufacture 2015 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis free loaded on truck, ex works Price Technical details X-Travel 2600 mm Y-Travel 870 mm Z-Travel 760 mm table surface area 2800 x 970 mm control HEIDENHAIN TNC 530 spindle turning speed range 12000 rpm spindle drive 15 kW tool adaptor BT 40 Internal Coolant System Feed 20 bar Feed 10 m/min Rapid Traverse 20/20/30 m/min total power requirement 25 kW Additional information used vertical machinig centre witH dual arm toolchanger BT 40 HEIDENHAIN TNC 530 - Dual toolchanger - synchronised tapping - internal coolant with filter - Spindle Oil Cooling 32 TOOLS MAGASIN COOLING TROUGHT THE SPINDLE 20 BAR ...

Machine Details Stock-No. 1105-03857 Type of machine Machining Center - Vertical Make QUASER Type MK 60 II Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Technical details X-Travel 1020 mm Y-Travel 610 mm Z-Travel 560 mm tool taper BT 40 spindle drive 25 kW spindle turning speed range 60 - 10000 rpm tool change unit 24-speed BT 40 tool changing time 4 sec table-size 1200 x 635 mm table load capacity - central/maximum 500 kp Rapid Travel X/Y/Z 30 m/min Feeds X/Y/Z -STEPLESS 20000 mm/min total power requirement 40 kVA Additional information CNC control HEIDENHEIN TNC 426 complete covering, A.T.C. for 24 tools BT 40 TABLE 1200 X 635 25 KW 10000 RPM CHIP CONVOYER

Machine Details Stock-No. 1105-03865 Type of machine Machining Center - Vertical Make FEELER Type FV 1000 Year of manufacture 1999 Type of control CNC Storage location HAGUENAU FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Technical details X-Travel 1000 mm Y-Travel 500 mm Z-Travel 500 mm tool taper BT 40 spindle drive 7.5 kW spindle turning speed range 60 - 6000 rpm tool change unit 22-speed BT 40 tool changing time 4 sec table-size 1200 x 500 mm table load capacity - central/maximum 800 kp Rapid Travel X/Y/Z 48 m/min Feeds X/Y/Z -STEPLESS 20000 mm/min total power requirement 18 kVA Weight of the machine approx. 5 t Additional information CNC control FANUC OM complete covering, A.T.C. for 22 tools BT 40 COOLING TROUGHT SPINDLE

X-axis travel: 1520 mm Y-axis travel: 720 mm Z-axis travel: 700 mm Table size: 610 x 1854 mm Spindle speeds: 50 - 6000 rpm Spindle nose: ISO40 Toolchanger: 17 pockets Controller: Fagor 8055 MC Featured with: - Chipconveyor - Spindlecooling - Filterunit - ISO40 Toolchanger - Machine manuals Country of origin: Taiwan Spindle motor: 15 kW Machine LxWxH: 4400 x 2800 x 2800 mm Machine weight: 5000 kg

Key data: 320 mm, 600 mm, 3500 1/min

Stock-No. 1105-03841 Type of machine CNC Lathe - Inclined Bed Type Make LEADWELL Type LTC 20 Year of manufacture 1990 Type of control CNC Storage location HAGUENAU FRANCE Country of origin taiwan Delivery time by appointment Freight basis EX WORK Price Technical details turning diameter 300 mm turning length 600 mm control Fanuc O- T Travel -X Axis 175 mm Spindle Bore: Ø 50 mm Number of Turrets: 1 piece No. of tools in turret 1 12 pieces power capacity 11/15 kW spindle nose A2-6 tailstock quill taper MT 4 feed range 1 - 15000 mm/min Rapid Traverse 12 / 15 m/min total power requirement 30 kW Additional information CNC FANUC OT turret 12 tols TAILSTOCK CHUCK Chip Convoyer

Fong Kee (Taiwan) Year of manufacture 2016 Double Head (125mm screw) Accumulator type continue extrusion machine Machine In production Product type 160 Liter Float Dimensions 1188mm x 875mm x 407mm net weight 9kgs gross weight 17kgs estimate production rate 30/32pcs per hour Mold dimensions 1300mm x 1260mm x 860mm

Machine Details Stock-No. 1105-03889 Type of machine CNC Lathe Make FEMCO-ASTRHAL Type 20-60 Year of manufacture 1989 Type of control CNC Storage location HAGUENAU Country of origin taiwan Delivery time IMMIDIATELY Freight basis ex stock Price Technical details turning diameter 540 mm turning length 600 mm control Fanuc 10 T turning diameter over bed 540 mm turning diameter over slide 255 mm rapid traverse 15 (X/Z) m/min power capacity 11-15 kW Tool Numbers 12 chip conveyor 1 kW Additional information CNC-lathe clamping tool, main spindle, power chuck TAILSTOCK CHIP TANK cnc control fanuc 15 T 42 DIAMETER HOLE TTHE SPINDLE 11/15 KW 3500 RPM

Machine Details Stock-No. 1105-03875 Type of machine Machining Center - Vertical Make LEADWELL Type V 40 Year of manufacture 2000 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time IMMIDIATELY Freight basis EX WORK Technical details X-Travel 1020 mm Y-Travel 510 mm Z-Travel 610 mm table-size 1200 X 510 mm spindle taper BT 40 number of spindle speeds 80 - 8000 min-1 tool piece magazine with 20 places total power requirement 20 kVA Additional information FANUC 18 M CONTROL with CHIP CONVOYER

This TONGTAI TD-2500YBC Lathe was manufactured in 2019 in Taiwan. It is equipped with a FANUC Q1-TF control and has a spindle speed of 3500 rpm. The machine has 4 axes (X/Y/Z/B Axis Travel: 230/±51/600/630 mm) and can process a bar capacity of Ø64 mm. It is in a well-preserved condition with overall 7,600 operating hours.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42700 € : 3100 mm : 2.5 mm : 135 ° : 2.2 kW : 4300 mm : 1770 mm : 1890 mm : 4000 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 45.300,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 15.300,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 37700 € : 2035 mm : 3.5 mm : 135 ° : 3.7 kW : 3000 mm : 1100 mm : 1750 mm : 2450 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 39.100,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.000,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45900 € : 3100 mm : 3.5 mm : 135 ° : 3,7 kW : 4300 mm : 1770 mm : 1890 mm : 4520 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 48.500,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 15.300,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 51800 € : 4010 mm : 2 mm : 135 ° : 2,2 kW : 5600 mm : 1750 mm : 2050 mm : 4600 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 53.800,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 16.100,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Takisawa TCY-160YS L5 Lathe was manufactured in the year 2015. It is equipped with a FANUC Seris 32i B. The machine has a spindle speed of 6000 rpm. Simultaneous machining with spindle and counter spindle based on bar capacity of 42mm. As an Opposed Twin-Spindle CNC Lathe with a max. turning diameter of 220 mm and max. turning length of 491 mm it provides a solid turning solution for machinists.

This MTRent T22Y Lathe was made in 2019 in Taiwan and has 1294 production hours. It is equipped with a SIEMENS SINUMERIK 828D control unit. The machine has a spindle speed of 4500 rpm.

This HARDINGE GS-150 Lathe was manufactured in the year 2008 in Taiwan and has 38272 hours, of which 17669 are cutting hours. It is equipped with a Fanuc Series Oi-TC control unit. The machine has a spindle speed of 6000 rpm.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 41200 € : 2540 mm : 3.5 mm : 135 ° : 3.7 kW : 3850 mm : 1700 mm : 1860 mm : 3900 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 42.900,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.600,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 55200 € : 3100 mm : 3.5 mm : 135 ° : 3,7 kW : 4300 mm : 1770 mm : 1890 mm : 4220 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules (sample photo showing model V-AMH 2535 2 axes NC control Schneider) OPTION: 2 axes NC control Schneider touchscreen incl. motorized back gauge 800 mm € 15.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 34900 € : 2035 mm : 2.5 mm : 135 ° : 2.2 kW : 3000 mm : 1100 mm : 1750 mm : 2100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 36.700,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.000,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45700 € : 2540 mm : 6.5 mm : 135 ° : 7,4 kW : 3900 mm : 1750 mm : 2050 mm : 6200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.600,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Takisawa TCY-160YS L3 Lathe was manufactured in the year 2016. It is equipped with a FANUC Seris 32i B. The machine has a spindle speed of 6000 rpm. Simultaneous machining with spindle and counter spindle based on bar capacity of 42mm. As an Opposed Twin-Spindle CNC Lathe with a max. turning diameter of 220 mm and max. turning length of 291 mm it provides a solid turning solution for machinists.

This TAKISAWA TS-4000YS Lathe was manufactured in the year 2015 and has 3333 production hours. It is equipped with a FANUC Series 32i-MODEL B control unit and has 5 axis. The machine has a spindle speed of 6000 rpm.

This Yida BML-420 Lathe was built in Taiwan in the year 2011. It is equipped with a Fanuc control unit. The machine has a spindle speed of 3500 rpm.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 38400 € : 2540 mm : 2.5 mm : 135 ° : 2.2 kW : 3850 mm : 1700 mm : 1800 mm : 3400 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° €40.600,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.600,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 40900 € : 2035 mm : 6.5 mm : 135 ° : 7.4 kW : 3300 mm : 1550 mm : 1900 mm : 3710 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 43.100,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 14.000,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47500 € : 3100 mm : 4.5 mm : 135 ° : 5,5 kW : 4500 mm : 1750 mm : 1950 mm : 5500 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 50.100,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 15.300,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 55100 € : 4010 mm : 3.5 mm : 135 ° : 3,7 kW : 5600 mm : 1800 mm : 2050 mm : 6100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° €57.800,-- OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm € 16.100,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This VICTOR V-turn A200Y Lathe was manufactured in the year 2022 in Taiwan. It is equipped with FANUC Series 0i-TF Plus control unit. The machine has a spindle (Spindle nose: ASA A2-6) and a counter spindle (Spindle nose: ASA A2-5). The machine disposes of a turret with 12 positions. It comes with IEMCA bar feeder included in the scope of delivery.