tainless steel plate used for sale

This lot is unused ; Auction-ID: A1-51150-43

Used Fluostar Optima micro plate reader Voltage: 115/230V (60/50Hz) Includes system connection cable Auction-ID: A1-50936-92

Aluminum Platform / Walkway Intermediate element with 3 gates. Work/stand space: 75 x 220cm Total fences: 90 x 270 x 80 cm Auction-ID: A1-50936-146

Batch of nickel-plated aluminum tubes, 74kg including pallet with edges Diameter: 9cm (inner 8cm) Auction-ID: A1-50936-172

Plot has been tested for operation Auction-ID: A1-40164-3

Plot has been tested for operation Auction-ID: A1-40164-6

- Quick coupler - Includes bucket and forks - Closed cabin with air conditioning Auction-ID: A1-40330-17

Steel Storage Structure for Plates and Materials Type: Structure for storing plates and materials Material: High-strength structural steel Profiles: Welded rolled or tubular steel sections Construction: Reinforced structure with horizontal and vertical bracing Finish: Anti-corrosion paint or epoxy coating Height: 2,000 mm – 4,000 mm Width: According to number of storage bays Depth: Adapted to sheet dimensions Capacity per level: Variable (e.g., 1,000 kg – 5,000 kg per compartment) Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-87

Hyundai Plate Compactor – model CNP50C/57 Hyundai Power Products vibratory plate, equipped with a 79 cc petrol engine with a power of 2.8 hp. The vibratory plate has a base plate of 47 × 30 cm and a specified compaction depth of approximately 20 cm. Suitable for compacting sand, gravel and soil in paving work, garden projects and light construction work. Compact and practical for use on smaller surfaces. Complete with booklets Not seen working Auction-ID: A1-47450-1930

Plot has been tested for operation Auction-ID: A1-40164-5

Plot has been tested for operation Auction-ID: A1-40164-7

Plot has been tested for operation Auction-ID: A1-40164-266

Plot has been tested for operation Auction-ID: A1-40164-2

Equipped with: Wacker BS 600 petrol rammer, equipped with Wacker WM80 2-stroke engine, power approx. 2.1 kW, approx. 700 strokes/min, stroke length 65 mm, stamping foot approx. 280 mm wide and own weight approx. 62 kg. Auction-ID: A1-47395-1753

Equipped with counter: 4 o'clock, lifting attachment, forward and reverse steering Auction-ID: A1-47395-2501

Plot has been tested for operation Auction-ID: A1-40164-4

Unused, Hatz diesel engine, electric start, forward/reverse Auction-ID: A1-47395-1765

Unused, weight 2kg Auction-ID: A7-51245-112

Hyundai Plate Compactor – model CNP50C/57 Hyundai Power Products vibratory plate, equipped with a 79 cc petrol engine with a power of 2.8 hp. The vibratory plate has a base plate of 47 × 30 cm and a specified compaction depth of approximately 20 cm. Suitable for compacting sand, gravel and soil in paving work, garden projects and light construction work. Compact and practical for use on smaller surfaces. Complete with booklets Not seen working Auction-ID: A1-47450-1936

: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm : 11 mm : 11 mm : 7 mm : 8 mm : 6.4 mm : 225 mm : 215 mm : 165 mm : 8 m/min : 3950 mm : 1200 mm : 1200 mm : 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the to ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26327 Technical data: - Length approx. 2000 mm - Width approx. 1000 mm - Panel thickness approx. 170 mm - Table height 840 mm - 4 height-adjustable feet - Weight approx. 1200 kg

Offer 26377 Technical data: - Measuring control plate according to DIN 876 / 00 - Length approx. 1200 mm - Width approx. 800 mm - Panel thickness approx. 160 mm - Height-adjustable table height with cabinet base approx. 910 mm - Cabinet base with 1 door + 4 drawers - Drawer width 550 mm - Weight approx. 500 kg

6.5HP; 40cm/s; 13Kn; wheels; foldable; 6528 Auction-ID: A1-51256-654

6.5HP; 40cm/s; 13Kn; wheels; foldable; 6528 Auction-ID: A1-51256-99

3 driven rolls conical bending overload protection hardened rolls 2 digital readouts for positioning or bottom rolls Number of rolls: 3 rolls Roll capacity cold: 2050 x 25 mm Roll dia upside: 320 mm Dia under roll - side rolls: 310 mm Power needed: 22 kW Length: 4600 mm Depth: 1950 mm Hight: 1750 mm Weight: 10,5 ton

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 71600 € : 1353.24 € : 2050 mm : 13 mm : 10 mm : 13 mm : 10 mm : 10 mm : 8 mm : 240 mm : 240 mm : 190 mm : 820 mm : 11 kW : 3830 mm : 1160 mm : 1200 mm : 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 101400 € : 1916.46 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls a ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 107000 € : 2022.3 € : 3100 mm : 13 mm : 12 mm : 8 mm : 13 mm : 10 mm : 10 mm : 8 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 5310 mm : 1660 mm : 1590 mm : 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 97700 € : 1846.53 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll le ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 112500 € : 2126.25 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software so ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 138100 € : 2610.09 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solu ...

Power: 1.5 kW, grinding pad diameter: approx. 600 mm

Horizontal polisher in gantry arrangement with 30 mounts According to specification Cnc axes 5 x axle 3850 mm y axle 3050 mm z axle 800 mm Equipped with transport bridge, electric geared motor, switch control box and concrete rails Auction-ID: A1-50663-1307

21061797 Offer includes 1x Ammann plate compactor 22/40; the other items in the photos are not included Auction-ID: A7-51315-81

Equipped with folding control column, forward and reverse Auction-ID: A1-50597-140

Manufacturer: Robert Bürkle Machine Type: Hydraulic Plate/Veneer Press Suitable for pressing veneers and wood-based materials Large-format press plates Solid industrial design Used condition Type, year of manufacture and technical data currently not readable Functional condition not checked Sale in existing condition Auction-ID: A1-50373-8023

Vertical surface grinding and polishing machine According to specification Working width Y axis 4400 mm, Z axis travel 150 mm Equipped with transport bridge, electric motor gearbox, switch control box and steel rails on concrete Auction-ID: A1-50663-1308

7x carrier plate, 4x pressure reducers, 3x pipe sealing pads, including mesh transport box Auction-ID: A1-51285-415

9 pallets with metal gussets In various sizes including 25x10 cm As well as 2 buckets of bolts Auction-ID: A1-50663-1590

Wacker Neuson DPU 6555 Heap reversible (forward/reverse) diesel vibratory plate from year of construction 2012. Powered by a Hatz 1D81S-358A 13 hp diesel engine with electric start and a good battery. Equipped with spreading plates, a dead weight of approx. 520 kg and an impact force of 65 kN (6.5 tonnes). Auction-ID: A1-41952-65

size: L 500 x W 50cm, suitable for temporary floor constructions at events, tents and parties Auction-ID: A1-50707-168

Approx. 30 plastic trays with various sizes of nail plates and cut-out rings Auction-ID: A1-50663-1671

Used for chain conveyors, scraper conveyors and industrial transport systems Auction-ID: A1-51321-89

Auction-ID: A1-51025-7

Used for chain conveyors, scraper conveyors and industrial transport systems Auction-ID: A1-51321-88

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

length:1500 mm width:1000 mm weight of the machine ca.:0,2 t dimensions of the machine ca.:1,5 x 1 x 0,8 m Surface plate / Welding bench with underframe Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

Used APV N35 Plate pasteurizer 10000LhTechnical Specifications & Performance DataThe APV Products N35 is a plate pasteurizer engineered for high-efficiency thermal treatment of liquid food and beverage products. Built in 2004, this second hand system offers a compact, hygienic solution for beverage production and industrial packaging processes where consistent heat transfer and reliable performance are essential. Previously operated on whey in a dairy environment, it is now dismantled and ready for integration into a used bottling line or processing plant.Manufacturer: APV ProductsModel: N35Year: 2004Type: Plate pasteurizer (plate heat exchanger design)Nominal capacity: 10,000 l/hHeat transfer surface: 56.35 m²Working pressure: 10.0 barPrevious application: Whey (dairy processing)Advanced Automation & Control SystemsThe N35 plate pasteurizer architecture supports modern automation strat ...

Used APV N35 Plate pasteurizer 10246 KghTechnical Specifications & Performance DataThis plate pasteurizer is engineered for continuous high-efficiency thermal treatment in beverage and dairy processing. Manufactured by APV Products, the N35 model provides reliable heat exchange performance with a compact footprint, making it ideal for integration into a used bottling line or broader industrial packaging and beverage production setup.Manufacturer: APV ProductsModel: N35Nominal capacity: 10,246 kg/hHeat transfer surface: 54.6 m²Working pressure: 10 barWorking temperature range: 0.9 to 100 °COverall width: 1300 mmOverall height (max): 2500 mmOverall length: 2700 mm (approx. 3000 mm with control cabinet)Configuration: Plate heat exchanger pasteurizer (HTST/flash process)Previous application: Milk processingAdvanced Automation & Control SystemsThe APV N35 plate pasteurizer supports modern a ...