tainless steel plate used for sale

Steelcase B-Free grey/white lounge bench 72 x120 x 47 cm Auction-ID: A1-51154-43

Chair with upholstered purple seat, grey backrest and black metal frame. The chair has armrests with black plastic pads and is suitable for offices, meeting rooms, waiting areas, training rooms or reception areas. Auction-ID: A1-51154-92

Type: Spengler screw / façade screw (Linsenkopf mit Scheibe) Standard: DIN 7995Dimension: 4.5 x 35 mm Material: Stainless steel A2 (stainless steel) Contents: 100 pieces per box Total number of boxes: 36. Auction-ID: A1-40900-182

Technical description brewing installation – 550 litres Complete professional stainless steel brewing installation with a net boiling capacity of 550 liters. The installation is fully manual, without PLC or electronic process automation. Composition of the installation: 1. Hot water boiler – 300 liters - Stainless steel, single-walled and not insulated - Propane heating - Equipped with pump for the rinse water 2. Mash kettle – up to 600 litres net - Stainless steel, double-walled and insulated - Propane heating - Mash is transferred to the lauter tun with a pump 3. Filter tun - Stainless steel, double-walled and insulated - Perforated filter bottom - Large manhole at the front for removal of spent grains - Spray ball for rinsing with hot water from the hot water boiler 4. Boiling kettle – 550 liters net - Stainless steel, double-walled and insulated - Propane heating -  ...

Various types of stainless steel A2 screws wood 4x30 1500 pieces 4x40 300 pieces 4x50 600 pieces 4x60 200 pieces 4x70 200 pieces Auction-ID: A1-40900-301

3 Steelcase Node Seminar Chair with Table in Grey. Images are for reference only, actual color may vary depending on screen and light. Auction-ID: A1-51154-67

punching pressure: 70.0 t punch diameter: 26.0 in 20.0 mm punch diameter: 57.0 in 9.0 mm throat: 305 mm round bar steel: 45.0 mm square edge steel: 45.0 x 45.0 L-beam: 130 x 13 mm shear: flat material: 300 x 20.0 / 375 x 15 mm blade length: ca. 380 mm adjustment of stroke: 0 - 55 mm strokes per minute: 34 work height max.: 1030 / 890 mm rectangle notching till: max. 10.0 mm ST voltage: 400 V total power requirement: 5.5 kW weight: 1620 kg dimensions: 1700 x 1000 x 1800 mm Well-maintained condition () Current new price ~ 20.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Equipped with multiple workstations: Punching station Flat bar shear Angle/profile steel shear Notching station - Infinitely adjustable stroke length - Very compact design - Support table at the notching and punching stations - Lateral support surfaces - 2x mobile  ...

punching pressure: 36.0 t punch diameter: 27.0 in 10.0 mm throat: 170 mm round bar steel: 30.0 mm L-beam: 80 x 80 x 8 mm square edge steel: 25 x 25 mm shear: flat material: 350 x 6 / 200 x 13 mm blade length: 356 mm strokes per minute: ca. 24 pro Min work height max.: 980 mm oil volume: 30.0 l voltage: 400 V total power requirement: 2.2 kW weight: 485 kg dimensions: 1200 x 800 x 1500 mm From a maintenance workshop Original price of base machine ~ 12.000 euros Special price upon request Features: - Compact electro-hydraulic structural steel shears - Punching station, flat steel shear, angle/profile steel shear - Sturdy welded construction - Very compact design - Side support surfaces - Various punches and dies (red metal box) - 1x freely movable foot switch - Emergency stop button - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution o ...

pressure: 60.0 t punching cross-cut in cmm: 28 in 15 / 38 in 11 mm square edge steel: 35 x 35 mm L-beam: 120 x 120 x 12 mm round bar steel: 40.0 mm flat steel: 200 x 20 / 300 x 15 mm blade length: 317 mm throat: 220 mm work height max.: 940 / 1140 mm strokes per minute: max. 26 work stroke: max. 55.0 mm oil volume: 23.0 ltr. total power requirement: 4.0 kW weight of the machine ca.: 1440 kg Dimensions (HxWxD): 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Punching station, flat steel shear, . angle/profile steel shears, notching station - heavy-duty and stable welded construction - infinitely variable stroke adjustment - very compact design - support table at notching and punching stations - side support tables - 1x freely movable control panel - Em ...

pressure: 50.0 t punching cross-cut in cmm: 27.0 in 14.0 mm ST round bar steel: 32 + 17 mm square edge steel: 30 + 18 mm L-beam: 100 x 10 mm throat: 200 mm shear: flat material: 190 x 10 mm blade length: 200 mm stroke - stepless adjustable: 10 - 28 mm stroke: 14 - 28 H/min total power requirement: 4.0 kW weight: 900 kg range L-W-H: 950 x 650 x 1730 mm from a maintenance workshop in good condition () Equipment: - Compact electro-hydraulic combined structural steel shear with notching station with punching station flat bar shear angle steel shear round and square bar shear - Support table at the notching station - Support table at the punching station - Stripper at the punching station - 1x mobile foot switch - Assortment of various punches and dies - Original operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Batch of various stainless steel and aluminum plates and tubes Including frame and pallet Total weight: 455kg Auction-ID: A1-50936-173

2mm thick, with steel protection, only affects the top package of plates Auction-ID: A1-50964-8

Approx. 400kg, stainless steel 304, 40x40 grids, 2mm wire thickness Auction-ID: A1-50964-120

Roof slope 20 degrees Construction consists of: 4 intermediate trusses: 2x column I220 and 2x roof beam I220 1 end truss: 2x corner column I160: 2x roof girder I140 and 2x intermediate column I160 1 end truss: 2x corner column I160: 2x roof girder I140: 2x intermediate column U160 and 1x door beam U160 à 4 meters 5 coupling tubes 70x70x3 mm 12 bracing strips flat 50x6 mm with tensioner M16 Galvanized Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-2

Roof slope 20 degrees Construction consists of: 7 intermediate trusses: 2x column I220 and 2x roof beam I220 1 end truss: 2x corner column I160: 2x roof girder I140 and 2x intermediate column I160 1 end truss: 2x corner column I160: 2x roof girder I140: 2x intermediate column U160 and 1x door beam U160 à 4 meters 5 coupling tubes 70x70x3 mm 12 bracing strips flat 50x6 mm with tensioner M16 Galvanized Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-5

Batch of 45 boxes of Unbrako chrome steel screws (M20X50), 25 pieces per box Auction-ID: A1-50936-137

Motor: Frequency: 50Hz Voltage: 230/400V Watts: 2.3kW Auction-ID: A1-40983-120

Roof slope 20 degrees Construction consists of: 7 Intermediate trusses: 2 x column I330 and the first 3.40 meters of the roof beam I330 the rest of the roof beam I270 2 End trusses: 2 x corner column H160, 2 x roof beam H120, 2 x intermediate column I200, 2 x intermediate column U220 and 1 x door beam U220 á 4.50mtr. 32 Coupling Tubes 70 x 70 x 3 mm 28 Wind bracing strips flat 50 x 6 with tensioner M16 Powder-coated RAL7016 Screws 8.8 With NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-9

Roof slope 15 degrees Construction consists of: 9 Intermediate trusses: 2 x column I500 + the first 6.00 mtr. of the roof beam I500, the rest of the roof beam I450 2 End trusses: 2 x corner column H160, 2 x roof beam H160, 2 x intermediate column H160, 2 x intermediate column I240, 2 x intermediate column U240 and 1 x door beam U240 à 5.00 mtr. 14 Coupling tubes 80 x 80 x 4 mm 32 Coupling Tubes 70 x 70 x 3 mm 36 Bracing round 20 with tensioner M20 Powder coat RAL7016 Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-15

Stainless steel fan Motor: Frequency: 50Hz Voltage: 230/400V Watts: 2.3kW Auction-ID: A1-40983-119

Adjustable compartment width Rollable (Pictures are sample pictures) Auction-ID: A1-50529-82285

Roof slope 20 degrees Construction consists of: 5 Intermediate trusses: 2 x column I270 and the first 1.70 mtr. v.d. roof beam I270, the rest of the roof beam I240 1 End truss: 2 x corner column I180, 2 x roof beam I180 and 2 x intermediate column I200 1 End truss: 2 x corner column I180, 2 x roof beam I180, 2 x intermediate column U200 and 1x door beam U200 a 5.00 mtr. 10 Coupling tubes 70 x 70 x 3 24 Wind bracing strips flat 5O x 6 with tensioner M16 Galvanized Screws 8.8 With NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-6

5x adjustable stainless steel vacuum boilers Volume diameter: 25cm Inlet diameter: 5cm Auction-ID: A1-50936-7

Roof slope 20 degrees Construction consists of: 3 intermediate trusses: 2x column I220 and 2x roof beam I220 1 end truss: 2x corner column I160: 2x roof girder I140 and 2x intermediate column I160 1 end truss: 2x corner column I160: 2x roof girder I140: 2x intermediate column U160 and 1x door beam U160 à 4 meters 5 coupling tubes 70x70x3 mm 12 bracing strips flat 50x6 mm with tensioner M16 Galvanized Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-1

Batch of high-quality stainless steel pressure hoses with ball valve Auction-ID: A1-50936-54

Roof slope 15 degrees Construction consists of: 7 Intermediate trusses: 2x column I500 and 2x roof beam I450 2 End trusses: 2x corner column H160, 2x roof beam H160, 2x intermediate column I240, 2x intermediate column U240 and 1x door beam U240 à 5 meters 14 Coupling tubes 80x80x4 mm 26 Coupling tubes 70x70x3 mm 32 Wind bracing round 20 with tensioner M20 Powder-coated RAL7016 Including NEN1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-8

Adjustable compartment width Rollable (Pictures are sample pictures) Auction-ID: A1-50529-82276

Batch of 35x used flexible stainless steel hose with insulation cover Maximum length: 100cm Description on coupling piece: DN40 1.4301 NPT 1 1/2\" No. 13A051304 Auction-ID: A1-50936-73

Roof slope 15 degrees Construction consists of: 5 Intermediate trusses: 2 x column I360 and the first 3.20 meters of the roof beam I360 and the rest of the roof beam I300 2 End trusses: 2 x corner column H160, 2 x roof beam H160, 2 x intermediate column H160, 2 x intermediate column U240 and 1 x door beam U240 á 5.00mtr. 26 Coupling tubes 70 x 70 x 3mm 28 Bracing round 20mm. with tensioner m20 Powder-coated RAL7016 Screws 8.8 With NEN 1090 CE marking certificate. Lot is loaded with a forklift for free Auction-ID: A1-41180-10

Adjustable compartment width Rollable (Pictures are sample pictures) Auction-ID: A1-50529-82277

Lot of 30x Dockweiler stainless steel vacuum connections. Stainless steel 316 material Auction-ID: A1-50936-260

Roof slope 20 degrees Construction consists of: 5 intermediate trusses: 2x column I220 and 2x roof beam I220 1 end truss: 2x corner column I160: 2x roof girder I140 and 2x intermediate column I160 1 end truss: 2x corner column I160: 2x roof girder I140: 2x intermediate column U160 and 1x door beam U160 à 4 meters 5 coupling tubes 70x70x3 mm 12 Flat bracing strips 50x6 mm with tensioner M16 Galvanized Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-3

Adjustable compartment width Rollable (Pictures are sample pictures) Auction-ID: A1-50529-82286

Approx. 1850kg, tubes 2400mm long, 40x40mm, thick-walled, including transport stand Auction-ID: A1-50964-143

Roof slope 20 degrees Construction consists of: 4 intermediate trusses: 2x column I240 and 2x roof beam I240 1 end truss: 2x corner column I180: 2x roof beam I180 and 2x intermediate column I180 1 end truss: 2x corner column I180: 2x roof girder I180: 2x intermediate column U180 and 1x door beam U180 à 4.50 meters 5 coupling tubes 70x70x3 mm 12 bracing strips flat 50x6 mm with tensioner M16 Powder-coated RAL7016 Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-13

Approx. 800 kg, stainless steel 304, 30x30 and 40x40 grids, 2 mm wire thickness Auction-ID: A1-50964-119

Roof slope 15 degrees Construction consists of: 9 Intermediate trusses: 2 x column I400 and 2 x roof beam I360 2 End trusses: 2 x corner column H160, 2 x roof beam I200, 2 x intermediate column I200, 2 x intermediate column U220 and 1 x door beam U220 à 5.00mtr 10 Coupling tubes 80 x 80 x 4 28 Coupling tubes 70 x 70 x 3 28 Wind bracing round 20 with tensioner M20 Powder-coated RAL7016 Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-14

Approximately 290kg, stainless steel 304, various dimensions and thicknesses Auction-ID: A1-50964-121

Batch of ceramic and stainless steel mixing pots Auction-ID: A1-50936-126

Roof slope 20 degrees Construction consists of: 4 intermediate trusses: 2x column I240 and 2x roof beam I240 1 end truss: 2x corner column I180: 2x roof beam I180 and 2x intermediate column I180 1 end truss: 2x corner column I180: 2x roof girder I180: 2x intermediate column U180 and 1x door beam U180 à 4.50 meters 5 coupling tubes 70x70x3 mm 12 bracing strips flat 50x6 mm with tensioner M16 Galvanized Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-12

1x pallet corten plate 3000x1500mm, various remaining pieces of corten divided over 3 pallets, various remaining pieces of steel divided over 2 pallets, only concerns top 6 pallets Auction-ID: A1-50964-140

Roof slope 15 degrees Construction consists of: 7 Intermediate trusses: 2 x column I360 and the first 4.00 meters of the roof beam I360 and the rest of the roof beam I270 2 End trusses: 2 x corner column H160, 2 x roof beam H160, 2 x intermediate column H160, 2 x intermediate column U240 and 1 x door beam U240 á 5.00mtr. 32 Coupling tubes 70 x 70 x 3mm 28 Bracing round 20mm. with tensioner m20 Powder-coated RAL7016 Screws 8.8 With NEN 1090 CE marking certificate. Lot is loaded with a forklift for free Auction-ID: A1-41180-11

Stainless steel 316 Forklift available for loading Auction-ID: A3-46142-13412

Roof slope 20 degrees Construction consists of: 7 Intermediate trusses: 2x column I270 and 2x roof beam I270 1 End truss: 2x corner column I180, 2x roof girder I180 and 2x intermediate column I200 1 End truss: 2x corner column I180, 2x roof beam I180, 2x intermediate column U200 and 1x door beam U200 à 5 meters 10 Coupling Tubes 70x70x3 mm 24 Flat bracing strips 50x6 mm with tensioner M16 Galvanized Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-7

Roof slope 20 degrees Construction consists of: 6 intermediate trusses: 2x column I220 and 2x roof beam I220 1 end truss: 2x corner column I160, 2x roof beam I140 and 2x intermediate column I160 1 end truss: 2x corner column I160: 2x roof girder I140: 2x intermediate column U160 and 1x door beam U160 à 4 meters 5 coupling tubes 70x70x3 mm 12 bracing strips flat 50x6 mm with tensioner M16 Galvanized Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-4

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Chamber filter plates PP Polypropylene chamber filter plate -for almost all manufacturers: Rittershaus & Blecher, Passavant, Netzsch, Hoesch, von Roll, Diemme, Filox, Andritz, etc. Cake thicknesses and plate thicknesses are freely selectable depending on the application and filtration conditions. The chamber filter plate made of plastic is characterized by excellent chemical resistance and easy handling due to its low dead weight. - One component - The filter surface consists of a special conical bump structure. This pimpled structure supports the filter cloth and ensures excellent filtration performance for each individual chamber. - Filtratin inputs and filtrate sequences individually according to customer requirements - High plan parallelism, thus flawless sealing in the closed state. Standard formats: 250, 400, 470, 500, 630, 800, 915, 1000, 1067, 1200, 1300, ...

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

Membrane filter records Standard welds together the filtration cycle can be shortened by the application of membrane filter records considerably, while the unproductive phase of the pressure filtration is broken off and is substituted with the postpressing. full plastic membrane record with welded together membranes, thereby the easiest Handling and the highest chemical permanence perfect separation of the Nachpressmediums of the filtration product variable material choice membrane corners as ? circle to the membrane movement poor in tension for almost all formats and manufacturers. they need spare parts, accessories, service or servicing for your chamber filter press high-pressure membrane pump or drainage facility? request us. we help you with pleasure.

APV K 55 plate apparatus, 6 departments, Y.O.M.1994, late 2005 dismantled, cleaned, new clip seals and plates UV tested. test log exists. Power approx. 960,000 Kcal/h