tainless steel plate used for sale

USED 10000 LITRES STAINLESS STEEL 316 TANK WITH 18 M2 EXCHANGER REF.: C3315 Horizontal tank made of 316L stainless steel with a capacity of 10,000 liters. 2000x3500x10 mm shell 8 mm thick klöpper bottom In the top bottom shell there is a DN450 manhole, a connection to the DN500 column, two DN50 supply inlets, a DN40 safety valve, two pressure probes 1/2 "Gas, a DN25 nitrogen inlet At the bottom there is a DN80 outlet On the side there are 3 outputs for DN80 sight glasses and a DN25 temperature probe On one bottom there are two DN80 outputs and on the other bottom there is an exit with DN300 coil. On 4 legs. General characteristics: Material Stainless steel 316L Technical characteristics: Capacity 10.000 L Bottom type Klopper

Steel hall, steel construction, nacelle trapezoidal sheet clad used Manufacturer: unknown Trapezoidal sheet metal clad Dimensions approx. 5 x 5 x 8 m Weight approx. 4 t The hall was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Billboard steel construction galvanized used Manufacturer: unknown 8 elements U 120 1.5 x 6.05 m with DIBOND panels (Aulminium composite panels) Dimensions approx. 12 x 6 m approx. 6.5 t Changes and errors in the technical data, information and prices as well as prior sale reserved.

stainless steel process tank capacity 0.25 m3 heating jacket thermal insulation stirrer for dense masses

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Stainless steel tank standing 10,000 liters capacity, insulation, agitator propeller, approximate dimensions: diameter 2,100 mm, total height incl. feet 4,000 mm, height feet: 500 mm, use so far: milk, price ex works, delivery possible.

Double-walled steel tank. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Stainless steel tank standing 13,000 liters - 2 pieces in stock, Including insulation and agitator propeller. So far, they have been used for milk production. Approximate dimensions: Diameter: 2,100 mm, height incl. feet approx. 4,000 mm, height feet approx. 500 mm. Price ex works, delivery possible

Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid

For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.

MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

Trough screw, washing screw, screw conveyor used Conveying length: approx. 6500 mm Diameter: approx. 700 mm Slope: approx. 400 mm Wing height: approx. 210 mm Wing thickness approx. 4 mm Stainless steel Geared motor SEW 3 kW 22 rpm 220/400 V Dimensions approx. 7800 x 1800 x 1800 mm The screw can be converted according to your wishes by our own special machine construction. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Binder stainless steel mobile vessel, volume 335 l, with isolation jacket, permitted operating pressure inside vessel -1/4 bar, permitted internal vessel operating temperature max.150ºC, test pressure 7.1 bar, 2 sight glases positioned in the lid (diameter 50 & 90 mm), pressure manometer, lid connections for product inlet, ventilation and bleeding, 1 spare connection and CIP-System with spray balls with 360º spraying area, bottom outlet, vessel inner diameter approx. 800 mm, vessel outer diameter approx. 900 mm, total height of vessel approx. 1800 mm, net weight approx. 310 kg, on wheels (8 units available).

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

Size dia 1500x1900mm

Conveyor belt Stollen belt Conveyor belt Flat belt, mobile, mobile used Manufacturer: andre zalkin & co Type: ECT Conveying length: approx. 3000 mm Width: approx. 200 mm Funnel approx. 1100 x 1100 mm partly stainless steel Belt channel with Plexiglas cover mobile Foldable Drive with gear motor Total dimensions: approx. 4500 x 1200 x 1200 mm

Cable pull, wire rope, steel cable, multi-purpose pull, gripping pull -Steel rope with: loops -Length: 4 m -Rope diameter: 12 mm -Price: per piece -Number: 1 pieces -Weight: 2.15 kg/piece

Chimney, exhaust pipe, chimney stainless steel pipe -Chimney system: O 250 mm, not insulated -Quantity: 2 pieces of 1 m each -Price: complete -Dimensions: 250/250 / H1000 mm -Weight: 7 kg

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Dimensions: 75/40/H60 mm -Weight: 0.7 kg/piece

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Price: per piece -Number: 6 pieces -Dimensions: 160/157/H54 mm -Weight: 3.5 kg/piece

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer

Blanchierschnecke, Blancheur, Stainless steel, Heating screw, Cooling screw used, Manufacturer: KOMEN & KUIN D.V. Diameter approx. 900 mm, Drum length approx. 6000 mm Stainless steel Double-walled Drive variable gear motor 3 kW 380 / 420 V Total dimensions approx. 7000 x 1800 x 2200 m. the matching feeding screw can be found here. Changes and errors in the technical data and information excepted.

Stainless steel tank, stainless steel tank used Manufacturer: E.S. Planungs-u. Rohrbau GmbH Year of construction: 1994 Volume approx. 9 m³ External dimensions : approx. 2.4 x 2.6 x 1.9 m Changes and errors in the technical data, information and prices as well as prior sale reserved.

Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive

Quick change tool post, tool post head, quick change tool post - Shooting dimensions: 90 mm -4x different versions: of steel holders available (pictures on request) -Price per piece -Length: 120mm

7,48m conveying spiral, steel, MDB 80, , new Special price ! As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging.

Diesel tank - Heating oil tank - Tank system - Steel tank brand new - with 30,000 litres capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 9010 white. (Other RAL colours are also possible on request!) L = approx. 10.00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - General: You will receive a V ...

Quick change tool holder, tool holder head, quick change tool holder -Mounting dimensions prism: 72 mm by 90 mm -Number: 2x steel holder available -Price: per piece -Dimensions: 145/60 / H125 mm -Weight: 3.9 kg/piece

Stainless steel pressure filter, EDFR-D-060-G-530-1-V-1, 400bar, Hydac, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Profile steel shears

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 30 m³ Dimensions: Ø 2.50 m × 6.60 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Hydr . Flat profile and bar steel shears with notching device and hole punching Specifications: - Flat steel shears cut up to 375 x 10 mm - 220 x 20 mm - Profile steel shears - cuts L-steel at 90° to 130 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device - with square notching device 100 x 42 x 10 mm - Hole punch - punching force 600 KN - with stop table - Projection 300 mm - perforated in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 4,020 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 25,50 kg | Pcs. Note: - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes and 2 angles welded on.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 60 mm -Transport roller width: 830 mm -Total length: 850 mm -Admission: M8 -Number: 10 rolls available -Price: per piece -Weight: 2.7 kg/piece

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 3,750 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 22.70 kg | Pcs. Note: - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes and 2 angles welded on.

brand new fuel oil tank - diesel tank - storage tank with a capacity of 5,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - iron gray / RAL sh ...

Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...

The scope of delivery includes: 03x Stacking container, used Manafacture: Thyssen Material color: hot-dip galvanized overall width: approx. 850 mm (outside-outside) Frame width: approx. 800 mm Usable width: approx. 780 mm total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Usable height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outside-outside) Frame depth: approx. 480 mm Usable depth: approx. 400 mm Stackable: Yes Crane eyelets: 4 pieces Diameter crane eyelets: approx. 40 mm Note: The stacking or transport containers can be bent. Furthermore, these dents, or other have damage.

The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: sendzimir galvanized Material: Steel Type designation: MRT-50x1,5.20 Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg

Excess stainless steel pipes 42CrNi18-10 Dimension 20 x 1 x 3000 39 pieces a' 3 meters

Quick change tool holder, tool holder head, quick change tool holder -Support half-round: 22 mm -Assembly for: Grooving/slot steel -Drawing with the photos -Number: 2x holders available -Price: for both -Weight: 3.3 kg/piece