tainless steel plate used for sale

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 3.0 m -Transport dimensions: Ø 110 x 600 mm -Weight: 4.2 kg

Offer 23294 Specifications: - Flat steel shears - knife length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Sectional steel shears - L- steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Bar steel shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Punch punch - punching force approx. 750 KN - - Infinitely variable stroke 0 - 70 mm - Perforates in steel up to 30 mm Ø in 20 mm - Projection 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - With: - 2 E. foot switches for two separate workstations - Slewing ring

Steel tank, horizontal, very thick-walled Volume: 61,800 L Dimensions: Ø 2.50 m × 13.26 m long, total height incl. brackets: 3.10 m with welded-on brackets 60 cm high

horizontal stainless steel tank, can be ordered with 6 brackets Volume; 85 m³ Dimensions: Ø 3.10 × 12.0 m long

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 24 m -Transport dimensions: 400/400/H100 mm -Weight: 14.5 kg

upright stainless steel tank with flat bottom Weight: 3 tons Volume: 43.5 m³ Dimensions: Ø 3.10 m × 6.15 m high

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 10 mm -Length: 10 m -Transport dimensions: 370/330/H130 mm -Weight: 3.9 kg

upright stainless steel tank, flat bottom Volume: 15 m³ Dimensions: Ø 2.60 m × 3.40 m high

V23 - used approx. 28.5 m³ / 28,500 ltr stainless steel tank V4A container tank, insulated, heatable and coolable. technical details: capacity: approx. 28.5 m³ / 28,500 litres material: stainless steel V4A dimensions: approx. Ø 2.50 m × L 9.20 m × H 2.60 m without railing Used V4A stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank, container tank, insulated by approx. 20 cm glass wool / rigid foam, heatable or coolable. With foldable railing, 2x lid on top of the roof, several inlets and outlets. The tank is being sold as shown in the pictures. Can be used as storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price upon request. Transport can be arranged at low cost. It is not possible to update al ...

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 12 mm -Length: 20 m -Transport dimensions: 380/150/H400 mm -Weight: 13.8 kg

V22 - used approx. 30 m³ / 30,000 litre V4A stainless steel tank, horizontal tank on pedestals. technical details: capacity: approx. 30 m³ / 30,000 litres material: stainless steel, probably V4A, we can have this tested upon request dimensions: approx. L total 6.50 m / L tank 6.00 m × Ø 2.50 m / H total 3.00 m Used stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank on 2 fixed, welded stainless steel bases, lid on the top of the tank (68 cm) and on the side, several inlets and outlets. On the flanges it reads V4A 1.4571, see picture. This stainless steel tank can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, manure, potato steam trays, leachate, rapeseed oil or as a rainwater collection tank, etc.. Pictures from the inside to follow. Unfortunately there is no type label. Price upo ...

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Transport dimensions: 360/90/H400 mm -Weight: 12.4 kg

upright stainless steel tank, incl. agitator Volume: 6 m³ Dimensions: Ø 2.24 m × 2.80 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank Volume: 6 m³ Dimensions: Ø 2.40 m × 1.90 m high

horizontal stainless steel tank, double-walled, insulated, oval, with feet Volume: 5.2 m³ Dimensions: Ø 2.05 m wide × 2.80 m long x 1.80 m high incl. feet

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 40 m -Transport dimensions: 480/100/H480 mm -Weight: 20.3 kg

upright stainless steel tank, incl. agitator Volume: 3.3 m³ Dimensions: Ø 1.66 m × 2.50 m high incl. agitator, cylindrical height 1.54 m

upright stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³

horizontal stainless steel tank, oval, with feet Volume: 2.3 m³ Dimensions: 0.70 m wide x 2.30 m long x 1.50 m high and 0.20 m high feet, total height 1.70 m

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m

Stainless steel tank, upright, cube Volume: 1 m³ Dimensions: 1.0 m wide × 1.2 m long × 1.60 m high

horizontal steel tank with very good inner coating (epoxy resin), food coating Volume: 45,000 l Dimensions: Ø 2.80 m × 7.70 m long Weight: 6.3 tons

upright stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Outlet under the tank with flange Ø 4.5 cm Outlet at the bottom of the floor Ø 6.5 cm, without tap

Stainless steel trolley for trays 60 x 80 3 sides closed front with door Cabinet mobile Used appliance cleaned More TOP stainless steel furniture in stock!

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Transport dimensions: Ø 420 x 100 mm -Weight: 11.5 kg

Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price

Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Manufacturer: L & L, steel shear with chassis -Type: FM1001 -Drive: 1.5 kW motor -Cutting width: 20 mm -Cutting height: 100 mm -Dimensions: 1160/500/H765 mm -Weight: 334 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Max. punching capacity: 600 kN Max. shear capacity: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shear to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shear Large support table on the punching side with stops Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 2,000 kg

Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg

Screws, eye bolts, crane eye, ring nut, eye nut -Manufacturer: Golfaro, M10 eyebolts -Grade: Stainless steel A2 -Quantity: 140 ring nuts available -Price: per piece/ Minimum order 15 pieces -Dimensions: 45/26/H46 mm -Weight 0.1 kg/pc.

Containers, granule containers, storage tanks, powder containers, paint powder containers -Container: Granule container -Material: Stainless steel tank -Dimensions: see photo technical drawing -Number: 2 containers available -Price: per piece -Dimensions: 605/605/H1160 mm -Weight: 28 kg/pc.

T15 - used approx. 45 m³ / 45,000 L steel tank, pressure tank, coated inside, lying on steel bases. Technical details: Content: approx. 45 m³ / 45,000 litres Material: Steel tank with inner coating Manufacturer: Tank- u. Stahlbau Abersfelder Dimensions: approx. Ø 2.30 m × L 11.00 m / H total 2.50 m Other: Used steel tank with Poxitar inner coating (2-component polyester resin), professionally cleaned and in good condition. Pressure tank 10 bar. Horizontal storage container on 2 steel bases, several inlets and outlets. Can be used as an above-ground tank or as an underground tank. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., o ...

Containers, granule containers, storage tanks, powder containers, paint powder containers -Container: Granule container -Material: Stainless steel tank -Dimensions: see photo technical drawing -Number: 2 containers available -Price: per piece -Dimensions: 605/605/H1160 mm -Weight: 28 kg/pc.

6 x indor silos

Baking trolley Bread rack trolley 10 ALU grates Stainless steel trolley mobile Dimensions: approx. 1270 x 440 x 1670 mm, WxDxH Used device cleaned

T14 - used approx. 22 m³ / 22,000 L steel tank, repainted inside and out, with heating coil, lying on steel bases. Technical details: Content: approx. 22 m³ / 22,000 litres Material: Steel tank with inner coating Dimensions: approx. Ø 2.30 m × L 5.30 m / H total 2.70 m Other: Used steel tank, repainted inside and out, with heating coil. In good condition. Horizontal, above-ground storage tank on 2 steel bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., or e.g. as a firefighting water tank. Price on request. Transport can be organised at a reasonable price. It is ...

Flange connection, V-flange, pipe flange, stainless steel flange, safety breakaway coupling -Pipe flange: Stainless steel flange -Type: HG/T20592-2009 PL200 PN10 304 -Diameter: Inside 213 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 340 x 265 mm -Weight: 26.1 kg

with laser positioning aid at the punching station Hydraulic cylinders with fast return stroke Easy installation of special tools Projection also available in 310 mm including punch/punch search device Punching capacity: D 22 x 18, D 50 x 8 mm Max. stroke length: 100 mm Table size: 700 x 700 mm Projection: 510 mm Dimensions: 1520 x 820 x 1960 mm Weight: 1850 kg

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 100 kg

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions 2000/1800/H810 mm -Weight: 117 kg

-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H930 mm -Weight: 82 kg

-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H800 mm -Weight: 82 kg

-Stainless steel work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 120 kg

with 5 stations Punching diameter: 40 x 8/22x 15 mm Projection: 165 mm 1-cylinder machine with footswitch with lighting Stop: 1000 mm Projection: 165 mm Punching diameter: 40 x 8/22 x 15 mm Blade length: 300 mm Notching: 50 x 90 x 70 mm Total power requirement: 3.7 kW Colour: blue/beige Angle steel: 75 x 75 x 6 mm Flat steel: 300 x 10 mm Square steel: 25 x 25 mm Round steel: D 30 mm Punching pressure: 45 t Dimensions: 1050 x 760 x 1490 mm Weight :840 kg

Punching capacity: ø 18x14 mm, (diameter and thickness): ø 50x5 mm U-steel height: 180 mm Max. stroke length: 100 mm Stroke rate/min. (20 mm stroke): 41 Max. hole diameter: ø 160x2 Motor power: 3.7 kW Punching force: 35 ton Weight: 1200 kg

for sheet thickness up to: 8 mm Flat Plate: 80 x 12 mm Square bar: 20 mm Round bar: 18 mm Weight approx.: 88 kg Dimensions: 620 x 250 x 380/880 mm high (with/without base)

Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg

Complete Sterile Tank Unit with PLC and Aseptic Valve Cluster High-quality sterile tank unit designed for hygienic storage and handling of liquid food products such as milk, juice, and similar beverages. The system includes a fully automatic aseptic valve cluster with PLC control and HMI, ensuring reliable operation and integration into modern aseptic processing lines. Main Tank Specifications - Tank Product Capacity: 12,740 liters (12.74 m³) - Working Capacity: 10,850 liters (10.85 m³) - Water Capacity: 662 liters - Maximum Pressure: 3.5 bar - Minimum Pressure: -1.0 bar - Test Pressure: 5.8 bar - Maximum Temperature: 145 °C Technical Data Materials - Product contact parts: 1.4404 stainless steel - Cooling jacket and legs: 1.4301 stainless steel Design Parameters - Design Pressure: +3.5 bar ÷ -1 bar - Design Temperature: 145 °C - Total Capacity: 12.74 m³  ...