128,877 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
bore capacity in steel (diameter): 32 mm arm length: 640 mm workpiece height max.: 950 mm bore capacity in cast iron: 50 mm threading: . spindle taper MT: 4 turning speeds: 88-1500mm (6x) U/min Feed: mm/U surface area: mm total power requirement: kW weight of the machine ca.: t Max. spindle-to-table distance: 950 mm Min. spindle-to-table distance: 220 mm Quill stroke: 220 mm KW: 1.5 Volts: 380 Machine number: 9028 Included: Clamping cube 600 x 445 x 380 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You c ...
FOR SALE... TAIKO TWO ROTOR SCREW PUMP TO WHOM IT MAY CONCERN WE VE NEW UNUSED TAIKO CSL-600 TWO ROTOR SCREW PUMP AT OUR STOCK THIS PUMP KEEPED AS SPARE PUMP AT TANKER VESSEL. PLS FIND SPEC AT BELOW. SERIAL NO.: NO. A1K6369 TYPPE: CSL-600 CAP: 560 m3/h REV: 1300MÄ°N POWER: 400PS DATE OF MANUFACTURE: NOV 2006 PUMP IS READY TO TRANSPORT AT WARE HOUSE. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Abu Ugurluba Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: 90 232 618 03 85 Mobile: 905556084850aliagamarine.com TURKEY
1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).
HAISHU CNC550T 4-axis CNC Lathe Producer- Taian HAISHU Machinery Co. Ltd YOM 2015 Condition- Never used Equipped with two spindle and an additional lower turret with 12 tools, providing automatic two-way processing of the workpiece in the achievement of maximum processing speed. Control CNC GSK988TD Additional Y axis Max. working length 750 mm Maximum turning diameter over bed 550 mm Maximum turning diameter pallet 500 mm Spindle type А12 Hydraulic Jaws: 2x 300 mm Front spindle bore taper 1:20 Spindle pass 75 mm Speed of Servo spindled 0-4000 mm/min Axis X/Z/B Quick moves 40 000 mm/min CS1, CS2 power of main motors: 15 kW Engine motor on axle C- 5.5 kW Moment by Axis X/Z: 15 Nm Movement on Y axis: + 55/-55 mm; Moment on axis B: 20 N. m; Time to change tool 1.6 sec Positioning accuracy 0.005 mm Moves on axes X1/X2- 350 mm Moves on axes Z1/Z2- 1100/1350/1850 mm ...
Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs
Qty. 1 Second hand aluminium extrusion press line Mfc.: Taiyuan Force: 5000 MT Type: Front loading – single action Built: 2007 Stopped in 2016 Product weight: max. 55 kg/m Billet dia.: 279 & 406 mm (11” & 16”) Length: 600 - 1200 mm Consist of: Cold billet saw Gas heated billet furnace Extrusion press Run-out table Platen saw Quenching device Single puller Stretcher Finishing saw Dies heater
Absolute encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver -Manufacturer: Astec Taiho, Magnetic Encoder unused OVP -Type: JR205 D1200CAF -Voltage: 10-30 VDC -Quantity: 1 piece available -Dimensions box: 125/80/H50 mm -Weight: 0.2kg
: gebraucht : 2021 : 3965 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 12480 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the softwa ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 39200 € : 748.72 € : 50 mm : MK 5 : 350 - 1.600 mm : 56 - 1.450 (12) U/min : Stahl/Guß: M40/M50 : 2670 mm : 1120 mm : 2410 mm : 3300 kg : 465 - 1.420 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 320 mm : 270 mm : 2.550 x 970 x 200 mm : 1,5 kW : 630 x 500 x 500 mm : 2760 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 30100 € : 574.91 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 51700 € : 977.13 € : 65 mm : MK 5 : 440 - 1.580 mm : 40 - 1.920 (12) U/min : Stahl/Guß: M50/M60 : 2850 mm : 1400 mm : 2940 mm : 4600 kg : 380 - 1.600 mm : 0,07 - 0,96 (6) mm/min : 5.5 kW : 432 mm : 370 mm : 2.480 x 1.050 x 210 mm : 1,5 kW : 700 x 500 x 400 mm : 3170 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of Log ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 21300 € : 408.96 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 635 x 520 x 415 mm : 2530 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
YEAR 2012 STROKES X, Y, Z: 800X610X600 MM SPINDLE DISTANCE TABLE 150-720 MM FAST 36 M/MIN SPINDLE BT40 RPM 10,000 (12,000) RPM 30-SEATER TOOL WAREHOUSE CNC FANUC 18I-MD CHIP EVACUATOR ADDUCTION AT HIGH PRESSURE SPINDLE CENTER N ° 2 REVOLVING TABLES WITH ROTATING COUPLING FOR HYDRAULIC CONNECTIONS WITH LOCKING EQUIPMENT.
Control Other MAPPS IVB Grinding length [mm] 150 Specifications: Grinding ø (max.) 350 mm Grinding length (max.) 150 mm Grinding wheels-ø 25-180 mm Swivel range grinding headstock (max.) 230° Grinding spindle: Technology internal grinding spindle Speed range 3-20,000 rpm Power (max.) 11 kW Grinding wheel holder HSK-A63 Drilling spindle: Drilling spindle technology Speed range 1,500-3,500 rpm Power (max.) 7.5 kW Tool holder HSK-A63 Workpiece spindle: Technology Direct Drive Clamping surface ø265 mm Table load (max.) 200 kg Workpiece Clamping Pneumatic Chuck General: Travel in X/Z 965/532 mm Rapid traverse in X/Z 24/20 m/mim Equipment/accessories: Direct displacement measuring system (glass scale) in X/Y Chip Management Magnetic Belt Conveyor Coolant management coolant system with paper belt filter and temperature control Workpiece Measurement P ...
Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 22 mm -Stroke: 700 mm -Dimensions: 118/71/H915 mm -Weight: 10.9 kg
Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder comes from a Hitchi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 50/50/H720 mm -Weight: 4 kg
Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a machining center Hitchi Seiki HC400 -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 370 mm -Dimensions: 44/44/H595 mm -Weight: 3.1 kg
sheet width: 1015 mm plate length: 1015 mm plate thickness: 6,0 mm Punching capacity: 25 t punch diameter: 88,9 mm total power requirement: 16 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4000 x 2320 x 2300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Build with double hirth coupling - T slot 22 with Jump off 200 mm - Diameter off center hole 50 mm
turning diameter: 500 mm turning length: 1075 mm control: Siemens One greates pass round over bed: 660 mm Main spindle:: turning speed range - main spindle: 3500 min/-1 power capacity - main spindel: 15 /22 kW spindle diameter: 75 mm milling spindle: milling spindle motor: 15/18,5/22 kW milling head speed: 12000 U/min b-axis: -30 / +210 ° axis stroke:: x-axis: 635 mm y-axis: 260 (+/-130) mm z-axis: 1170 mm feeds:: rapid traverse ( X / Y / Z ): 36 m/min 2nd Spindle:: Subspindle Power: 15/22 kW spindle turning speed range: 4000 U/min spindle passage: 66 mm turret:: number of toolpositions: 40 pos. tool taper: HSK T 63 dimensions of the machine ca.: 7,95 x 3,3 x 3,3 m total power requirement: - kW weight of the machine ca.: 22 t dimensions of the machine ca.: 6 x 3 x 2,9 m CNC turning and milling centre - Siemens One control (5 axis Simultaneous) - C-axis, Chuck(s): 10 - Main and cou ...
SPECIFICATIONS: Installed power: 3 kW 02 Cotton bags: Ø 450 mm
B&A REF: 9275 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 451 STROKE VOLUME: 475CM3 INJECTION PRESSURE: 1741AR PLATEN SIZES: 780 X 780MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 440MM MAX DAYLIGHT: 940MM EJECTOR STROKE: 130MM CONTROLS: VPC 20000E AIR VALVES: 1 HEATING CAPACITY: 12.9KW
Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg
STRAUTMANN BALE TAINER, This particular vertical press has a storage space which allows to make multiple bales, automatically., 60 Ton, Materials: Paper, cardboard, PET bottles, film, Total installed power 11 kw, Drive power 5,5 kw, height of input point 1.370 mm., inpout point width 1069 mm, Balke size LxWxJ 1,1 x 1,1 x 0,9 mt., 3 panes, weight up to 400 kg. (3 disks), 4 -tie vertical bindings, Constructed in 2012, Good working conditions, Total dimensions: LxWxH 6,355 x 2,056 x 2,756, Weight 7.050 kg ca, installed power - used power in work: about 60-65% : 11
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: center height 125 mm -Type: 36642.M3 -Recording: MK2 -Dimensions: see photos -Dimensions: 270/230/H180 mm -Weight: 8.5 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: center height 125 mm -Type: 36642.M2 -Recording: MK2 -Dimensions: see photos -Dimensions: 255/200/H170 mm -Weight: 7.1 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: Center height 83-175 mm adjustable/swivelling -Type: 36642.M31 -Dimensions: see photos -Dimensions: 280/220/H270 mm -Weight: 12.1 kg
Hydraulic tailstock top height 150 mm - 2 stub More: Hydr. Tailstock
Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Ramo a42 lathe -Quill: electrically driven -Motor: 220/380 V 0.18 kW -Spindle stroke: 300 mm -Recording: MK4 -Dimensions: 790/550/H580 mm -Weight: 98 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 101 mm -Dimensions: 85/123/H118 mm -Weight: 4.5 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: adjustable from 75 to 180 mm -Recording: MK2 -Dimensions: 275/240/H260 mm -Weight: 22.5 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 99 mm -Dimensions: 180/92/H144 mm -Weight: 4 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 110 mm -Dimensions: 218/117/H190 mm -Weight: 11 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 155 mm -Dimensions: 100/120/H182 mm -Weight: 5.5 kg
Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock comes from a lathe -Peak height: 145 mm -Recording: MK4 -Dimensions: 410/260/H320 mm -Weight: 51 kg
Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock comes: from a lathe -Tip height: 180 mm -Recording: MK4 -Dimensions: 540/250/H310 mm -Weight: 65.5 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: 130 mm -Recording: MK2 -Adjustment of tip from center: - 25 mm -Dimensions: 240/210/H160 mm -Weight: 7 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Bores for guide: Ø 30 mm -Dimensions: 170/200/H110 mm -Weight: 4 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 95-205 mm adjustable -Recording: MK2 -Dimensions: 275/260/H265 mm -Weight: 23 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: 145 mm -Recording: MK2 -Dimensions: 220/190/H150 mm -Weight: 6.5 kg
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 135 mm -Admission: -Dimensions: 165/300/H190 mm -Weight: 8 kg
Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 250 mm -Dimensions: see drawing in the photos -Dimensions: 285/180/H280 mm -Weight: 21.6 kg
tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 150 mm -Dimensions: see drawing in the photos -Dimensions: 210/105/H240 mm -Weight: 7.0 kg
Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: for dividing head -Shaft: Ø 50 x 515 mm -Dimensions: see photos -Dimensions: 645/90/H200 mm -Weight: 7.8 kg
Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 150 mm -Dimensions: see photos -Dimensions: 340/200/H260 mm -Weight: 20.4 kg
Tailstock, counter bearing for dividing head, dividing head -Manufacturer: Swedturn, Type ST12 CNC 300 tailstock -Quill: hydraulically driven -Dimensions: see photos -Dimensions: 900/650/H450 mm -Weight: 265 kg
Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: with guide carriage -Centre height: 100 mm -Dimensions: see drawing in the photos -Dimensions: 580/100/H180 mm -Weight: 11.1 kg
maximum number of results exceeded
please refine your search
