tablet press used for sale

Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton

Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

pressure: 34,0 kN stroke: 40 mm throat: 130 mm Working height from to: 80 - 240 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 80 Kg dimensions: 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton

pressure: 80 t stroke: 400 mm table surface area: 920 x 540 mm Motor output: 2,2 kW liter capacity: 9,0 l dayligth: 800 mm tank capacity: 31 l daylight between the columns: 920 x 300 mm weight of the machine ca.: 0,725 t dimensions of the machine ca.: 1,45 x 0,85 x 2,45 m Hand and Motor operated. Side-sliding cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton

Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton

Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5

pressure: 10 t stroke: 200 mm table-size: 450 x 450 mm working speed:: 10 mm/ sec. work height max.: 940 mm toolpiece height max.: 150 mm total power requirement: 1,1 kW : 150 x 6 mm weight: 0,4 t dimensions: 1,15 x 0,5 x 0,9 mm Horizontal bending machine with: - NC control - Dual footswitch - Set of standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a very well-preserved pressure tank of the Rieger brand: Specifications: - Manufacturer: Rieger Fluid Process - Max. operating overpressure: 3 bar - Capacity, 3,800 Ltr. - 2 pressure load cells available - Spray head available

Inv. Num. : 8437 Type: 50-VE Producer: IMS Created: 2002 Parameters: Compressive force: 50 t Maximum stroke rate per minute: 145 1/min Stroke: 80 mm Adjusting the ram: 75 mm Machine weight: 2300 kg

Container Press SMC/CP 1100 Used Equipment Used device is kpt. reconditioned, wear parts were replaced, incl. oil change and new hydraulic hoses incl. UVV safety test and protocol, 6 months warranty Pressing force: 3.5 tons Swivel stroke: 95 degrees Connected load: 230 V/ 1.5 KW Machine dimensions: 980x 1190x 1900 mm WxDxH Machine weight: 250 kg

A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible.

Embossing press Baier GEBA 1/F, installation height 90 mm, printing capacity 800 kg, working size 10cm x 14 cm, year of construction 1973, machine number 73040, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Inv. Num. : 8438 Type: AF-200-75 Producer: Arisa Generated: Parameters: Maximum retraction speed: 200 t Top table length: 950 mm Top table width: 750 mm Maximum number of strokes: 20 1/min Ram stroke: 250 mm

nominal power: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 1 ...

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Gluing press Emmes Type: H EBP 500 . 10 Working length 5000 mm Working height 1530 mm Support width or depth 150 mm 10 Hydraulic Vertical Press Punch 5 pneumatic front hold-down devices max. compressive force 150/cm² Hydraulic pump 2.2 kW Oil pressure 159 kg/cm Air pressure 8 kg/cm²

Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Cho ...

An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.

Waste compactor - 3.5 t pressure

Used piston press for apple juice production made by Bucher, model: HP 5000, capacity 5 t / h. New: 1985. 2 pieces available for general renovation (hydraulics) or for parts. Control cabinet available for 1 press.

Qty. 1 Second-hand aluminium extrusion press line Code Aluminium HE9 6063 Mfc.: Indian manufacturer Built: 1978 PLC hydraulic – upgradation done in the year 2005! Total Force of Press: 680 MT, 750 UST Extrusion Pressure: 210 Bar Billet Diameter: 5”, 121 mm Weight per Inch of Billet: 0.76 kg/inch Scope of supply: Log heating furnace Hot shear Extrusion press Overhead puller Under-bed cooling system Run-out cooling bed Belt conveyor Stretcher Cutting machine Die oven Conveyor table Conveyor for final packaging

A fully pneumatic Polzer glazing press is available. Clamping height: 2300mm, total press height: 2600mm, roller conveyor width: 170mm, roller conveyor height: 250mm, total depth: 1000mm, clamping width: 3500mm, total width: 4500mm. Documentation available. On-site inspection is possible.

Pressure power: 6-8 bar Air consumption: 8 l/Hub height of stroke: 12 mm : 134 mm no. of strokes: 400 Hub/min punching force max.: 3500 kp weight of the machine ca.: 80 kg Schüco pneumatic press for Schüco punching tools Art. No. Schüco: 290 124 manual included various pressing tools included! tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for secure and quick fastening of the press tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: ca. 3,2 t air pressure: 8 bar stroke: max. 20 mm distance between columns: ca. 250 x 200 mm weight of the machine ca.: 52 kg incl. various tools, see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25227 Specifications: - Pressure capacity 150 t - Working width 3600 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2300 x D 1600 mm - Weight approx. 8700 kg - with: - Swivel arm – control panel with ATL 550 control - For crimping depth + backgauge -Mot. Backgauge - Crowning device - Lasersafe FIESSLER - 4-fold universal die, split sharpening tool + deer's foot tool - Two-hand control panel, foot switch,

Offer 25200 Specifications: - Pressure capacity 200 t - Working width 3100 mm - Passage between the uprights 2600 mm - Table width 180 mm - Projection 300 mm - Installation height 450 mm - Feed speed 80 mm/sec. - Working speed 9 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Drive 400 V / 18.7 kW - Space requirement approx. W 3300 x H 2950 x D 1900 mm - Weight approx. 10500 kg - with: - Adjustment of the crimping depth + baling pressure -Mot. Backgauge with handwheel fine adjustment - 4-fold universal die - sharpening tool - Two-hand control panel, foot switch,

SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm 4 push-button plate suspension handles TS/500 Interface 4 safety light barriers Installed power: 3 kW

Stock number: P348, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: High pressure pump, Construction: Mounted on stainless foundation with wheels, Motor: Variator gear - 3,0 kW - 350–1750 rpm., Manufacturer: Rannie, Type: 18.50, Other: Serial no. 4661/71

Stock number: D568, Tincture press, Steel 37,, mechanical., 12 l product chamber., Ø 250 mm., Material: Steel 37

Stock number: H068, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Low pressure homogenizer, Theoretical capacity: 600 l/h., Working pressure theoretical: Max 10 bar, Manufacturer: Gaco, Type: AL-70, Other: Table model

Stock number: H056, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Low pressure homogenizer, Theoretical capacity: 600 l/h., Manufacturer: Gaco, Type: AL, Other: Table model

Stock number: H063, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Low pressure homogenizer, Theoretical capacity: 600 l/h., Manufacturer: Gaco, Type: AL, Other: Table model

Stock number: H050, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Low pressure homogenizer, Motor: 2,2 kW - 220/380 Volt - 1420 rpm., Manufacturer: Gaco, Type: 2

Stock number: H046, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 4 pcs., Item: Low pressure homogenizer, Motor: 0,75 HP - 220/380 Volt, Theoretical capacity: 600 l/h., Stage: 1, Manufacturer: Gaco, Type: AL-55, Other: The homogenizer has not been used

Stock number: SF171, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Gel press filter column, Construction: Hanging in tiltable stand, Top: Air controlled press cylinder, Bottom: Product filter, Dimensions: Column - Ø 300 x H 1000 mm , Type: Dan-Process

Stock number: SF061, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Pressure filter, Standing: On legs, Top: Hinged, bolted lid, Chamber: Ø 530 x H 450 mm, Manufacturer: ALA, Type: E size 45, Other: Stainless stack of plates for 6 filters

Stock number: SF015, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Gel press filter column, Construction: Hanging in tiltable rack, Top: Air driven pressing cylinder, Bottom: Product filter, Dimensions: Ø 200 x H 900 mm, Manufacturer: Dan-Process, Other: Dynamic axial compression (DAC) flow-through bed

High: 2.050 mm, Long: 750 mm, Force: 10 tons, Width: 600 mm, Weight: 800 Kg., Neckline: 150 mm, Stem travel: 200 mm, Rate of climb: 10 cm / sec, Piston rod ø of: 65 mm, Surface of the table: 300 x 300 mm., Specification: Hydraulics

1.875 litre, Stock number: T3909, Litre: 1.875, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Dished, Tank cover: In the side, Ø 360 mm, CIP: In top center, Working temperature: -10/150° C, Working pressure: 7,2 bar, Inner diameter: Ø 1200 mm, Total height: H 2150 mm, Manufacturer: Vamdrup Rustfrit Stål, Year: 2002, Other: The tank is polished on the in side and previously used for pressure.

4.600 litre, Stock number: T3907, Litre: 4.600, Material: Stainless acid proof steel SS 2377, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Dished, Tank cover: In the side, Ø 500 mm, Working temperature: 5-40° C, Working pressure tank: 3 bar, Inner diameter: Ø 1750 mm, Total height: H 2700 mm, Manufacturer: Vamdrup Rustfrit Stål, Year: 1997, Other: The tank is polished on the inside and previously used for pressure

2.230 litre, Stock number: T3899, Litre: 2.230, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. of legs , Top: Dished, Bottom: Dished, Tank cover: On the side, boltet Ø 360 mm, Inner diameter: Ø 1200 mm, Total height: H 2500 mm, Manufacturer: Vamdrup Rustfrit Stål, Year: 2002, Other: Polished on the inside - Previously used for pressure

145 litre, Stock number: T3886, Litre: 145, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. legs with wheels, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Working temperature: Max 100° C, Working pressure: Max 4 Bar, Inner diameter: Ø 500 mm, Outer diameter: D 620 mm, Total height: H 1480 mm, Manufacturer: Hosokawa Micron Europe BV, Model/type: R50-100, Other: 2 pcs. inspection glasses at the side

Bending Machine FEMAS PI 30.45 - 3000 x 45 t. - NC ESA 400, Information about technical data are not binding., Machine available subject to prior sale., Capacity: 450 Kn, Bending lenght: 3050 mm, Distance between shoulders: 2550 mm, Throath depth: 350 mm, Approach speed: 50 mm/s, Bending speed %smm/s: 10 mm/s, Return speed: 68 mm/s, Backgauge type: Motorized, Backgauge travel: 500 mm + R, Cn: ESA TRIA KLT 400 (3 axes), Main motor power: Kw 5,5, Weight: 5.500 Kg, Accessories: Tool set

pressure capacity max.: 80 t Stroke: 500 mm table surface area: 960 x 810 mm spindle pitch: 72 daylight between the columns: 950 / 540 mm passage: 640 mm machine weight ab.: 4500 kg dimensions of the machine ca.: 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment Description Used Indirect Extrusion Press • Brand / Model: SMS Hasenclever 28 / 31.5 MN McKechinstrang” • Type: Horizontal indirect extrusion system for non-ferrous billets • Drive: Mechanical main unit with hydraulic auxiliaries • Country of Origin: Germany • Current Status: Dismantled and available for dispatch • Serial No. / Year of Manufacture: [To be confirmed] 2. Key Technical Specifications Parameter Value Main Piston Force 25.07 MN Total Press Force with Coupling 31.23 MN Max Stroke 3,070 mm Working Stroke 2,825 mm Ram Speed at 28 MN 0–64 mm/sec Ram Speed at 31.5 MN 0–57 mm/sec Billet Diameter Range Ø 230–355 mm Billet Length (cold) 320–1,320 mm Receiver Heating System Resistance; max 63 kW / 375 °C Shear Force 0.64 MN Profile Ejector Force 0.31 MN Actuation Differential Cylinders Ø 280/200 3. Included Components • B ...