135,422 used machines on RESALE, but how to find them? Machine Search
Technical data for the press: Manufacturer Strautmann Umwelttechnik GmbH Type BaleTainer Year of construction 2014 Operating hours 14,947 hours Number of bales pressed: 5,174 pieces Press force main press 60 t Area pressing capacity 156 t/m² Dimensions of the insertion shaft 2,815 x 1,085 x 2,250 mm (L x W x H) Bale dimensions 1,100 x 1,100 x 700 mm (W x D x H) Drive power 5.5 kW Total connected load 13 kW Fuse 32 A, connector CEE 32 A Bonding 4-fold vertical, fully automatic Bale weights up to 400 kg, depending on material Hydraulic oil tank volume 90 L PLC control Siemens S7-1200 Control panel Siemens Simatic Touch Panel Press dimensions assembled 6,415 x 2,056 x 2,758 mm (L x W x H) Machine weight press approx. 7.5 t Scope of delivery: BaleTainer press incl. tilting device and bale chute. A megaliner with an effective interior height of at least 2.9 m is requi ...
used baler Manufacturer: UNOTECH Type: UPAXX 70 Year of Make: 2020 Machine was only in operation for about 6 months and was removed from the plant in 2022. Technical data: Press force: 700 kN Specific pressing force: up to 450 N/cm² Channel cross-section (h x w): 350 x 500 mm Filling opening (l x w): 1,250 x 420 mm Main pump drive power: 45 kW Performance under operating conditions: - At 85 kg/m³ bulk density in 1-stroke operation approx. 2.5 t/h - At 85 kg/m³ bulk density in 2-stroke operation approx. 4.2 t/h Package density for tin cans: up to 1,200 kg/m³ Machine weight depending on equipment: 10.3 t Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Photos will be added at short notice.
Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg
Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5500x1400x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L, built 2026 --------------------------------- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beam ...
In the pipeline HSM baler, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of Make: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³
Pressure vessel, pressure tank, pressure vessel, -Pressure tank: Stainless steel compressed air tank -Contents: approx. 1.5 liters -Item No.: 4541 ABD10 190 -Number: 19 containers available -Price: per piece -Dimensions: 385/150/H105 mm -Weight: 4.2 kg/pc.
Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³
Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible.
Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement.
Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible.
Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg
Press brake manufactured in 2018. This IBETAMAC 3200 100T features a pressing force of 100 t and a bending length of 3,200 mm. It includes controlled axes for X and Y, along with safety equipment such as additional side safety lasers. The machine is practically unused, fully functional, and available for testing. If you are looking to get high-quality bending capabilities, consider the IBETAMAC 3200 100T machine we have for sale. Contact us for further details.
Press brake manufactured in 1997. This IMAL E3A 100/33 features a press force of 100 tonnes and a bending length of 3,300 mm. With a motor power of 11 kW and a machine weight of 9,700 kg, it is designed for robust performance. If you are looking to get high-quality bending capabilities, consider the IMAL E3A 100/33 machine we have for sale. Contact us for further details.
Press brake manufactured in 2001. This IMAL SMALL 835/25 features a press force of 25 tonnes and a bending length of 835 mm. It is equipped with Delem DM51 CNC control for enhanced precision. If you are looking to get high-quality bending capabilities, consider the IMAL SMALL 835/25 machine we have for sale. Contact us for further details.
pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 595 x 410 mm ram adjustment: 70 mm no. of strokes: 150 Hub/min table adjustable in height: 240 mm total power requirement: 1,1 kW weight of the machine ca.: 1,45 t dimensions of machine L x W x H: 1,30 x 0,80 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm
Press brake manufactured in 2019. This Vimercati PHSY 30X1250 features a pressing force of 30 tons and a bending length of 1,250 mm. It includes an X-axis travel of 400 mm and an R-axis travel of 130 mm. If you are looking to get high-quality bending capabilities, consider the Vimercati PHSY 30X1250 machine we have for sale. Contact us for further details.
Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch
pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement.
Baler HSM 8 TE; good condition; cleaned and tested; Pressing force 80 KN; Bale size 650x505x500mm; with strapping. Baling press HSM 8 TE; good condition; cleaned and checked; pressing power 80 KN; bale size 650x505x500mm; with strapping tape.
TRUMPF 5130 B23 Year: 2021 Machine - C frame Press beam Spherical bearing of the press beam with press beam tilting On-Demand Servo Drive with 4-cylinder technology Distance measurement system (Y axis) with dynamic deflection compensation Hydraulic oil filling (life-long fill) Backgauge - Gauge fingers (two pieces) MACHINE OPTIONS Extension of the open height/stroke + 230 mm CNC-controlled wedge crowning 5-axis backgauge (X, Delta X, R, Z1, and Z2 axis) TRUMPF hydraulic upper tool clamp Keyboard and mouse Additional screen Shop floor programming TecZone Bend Tool Setup Optimizer (TSO) ACB Wireless (Automatically Controlled Bending) ACB Laser (Automatically Controlled Bending) Tool Indicator Part Indicator Front work area illumination Rear work area illumination Support bracket x 2 BendGuard Automatic
The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.
Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500
Equipped with Honda GX200 petrol engine Auction-ID: A1-47168-59
400V, equipped with hose reel Auction-ID: A1-47168-380
3000 x 100 ton Regularly maintained by Bystronic with recent oil change. Modeva 10 graphic CNC X1, Y1,Y2, R1, Z1, Z2 New Fiessler light guards fitted 2021 Hydraulic top tool clamping Full set of 250 V30 R1 top tool including segmented sections
230V, equipped with hose reel Auction-ID: A1-47168-381
CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details.
This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details.
PJ Hare AM300 Pie Press Serial: 9B91140 2009, Twin pie press, 100mm diameter presses, on tabletop mobile frame, 1Ph
Key data: 75 t
Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm
Baler HSM, type HL 7009 ST/A, year of construction 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of Make: 2021 Hours: 1118 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Note: The press is in good condition and has been inspected and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance paymen ...
maximum number of results exceeded
please refine your search
20 € 
