135,431 used machines on RESALE, but how to find them? Machine Search
Eccentric Press Brand Ebu Type EP15 Table size 400x430mm Max pressure 15 000kg Table height adjustment Table passage D160mm Stroke adjustment 4-70mm Ram bore 40mm Projection 200mm Max distance table-tappet 320mm Single/Duration Stroke Shield Flywheel D600mm 400V 1.0kW Machine weight ca. 870 kg The purchase price is net. Can be viewed and tested in our warehouse. Delivery is possible at an additional cost. All information without guarantee!
Factory rebuilt BIPEL 1500kN press with electrical equipment to suit 415 Volt, 3 Phase, 50 HZ, A.C. Supply. Generally in accordance with the following specification and comply with current supply of safety regulations :- Model 1500kN BIPEL Press Application Compression Moulding Mode of Operation Manual and Semi-Auto Frame structure Steel plate frame Cylinder type Double acting Pressing force kN 1500 Pull back force at circuit pressure kN 60 Operating height mm Approx. 930 Stroke mm 457 Daylight between Tables mm 976 Heated Platens mm 593 Table size L-R mm 711 F-B ...
Crimping tool, crimping machine, crimping jaws, crimping tool, hydraulic hose crimper, hose crimper -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm -Accessories: see photos -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg
Roller compactor, miner - used - : Price from location: only 950.-€ (net) Manufacturer: Bergmann Type: PS 8100E Year of Make: 1990 Serial number: 05 3658 2845/90 Press pressure: to Net weight: 750kg 400V, 5.5kW, Condition: good Available: from Q4/2026 Location: Hamburg Efficient waste compaction: A special steel drum enables effective collection, crushing and compaction of the waste, reducing its volume by up to nine times. Continuous filling: The machine allows continuous filling by all users. The feed chute can also be left open during the work process, which facilitates and accelerates waste compaction.
Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm
FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...
automatic baler Manufacturer: HSM Type: VK 42/800 Year of construction: 2002 specifications: Pressing force: 42 t Channel format: 700 x 800 mm (W x H) Binding: 4-fold horizontal Filling opening: 800 x 650 mm Drive power: 30 kW Optionally with conveyor belts
new
Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)
Used belt press made by Kreuzmayr model KEB 750, made of stainless steel. Designed for fruit and vegetable processing. Technical specifications: - Rated capacity: approx. 2000 kg/h (depending on the type of fruit and operating conditions) - Juice yield: up to 75% (from healthy, firm apples) - Length L: 2610 mm - Width W: 1450 mm - Height H: 1642 mm - Belt width/length: 750 mm / approx. 8000 mm - Working width/height: 688 mm / 0–50 mm, infinitely variable - Belt feed speed: infinitely variable 1.0–5.2 m/min - Automatic belt tension adjustment - Weight: 1100 kg - Power supply: 230V/16A/1.4kW - Drive motor: 240V/0.75kW/50Hz - Washing unit motor: 240V/0.18kW/50Hz - Required air pressure: min. 8 bar - Water consumption: approx. 3 l/min
Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t
Baler Strautmann, type BaleTainer, press force 60 t, year of construction 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of Make: 2012 Pressing force 60 t Total connected load 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Materials: paper, cardboard, PET bottles, foil Note: The press is in working condition and has been inspected and tested. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale a ...
Specifications: Capacity: 60 t Passage between stand: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Flow speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design made of welded steel -Manometer - Fine adjustment of pressure - Additional hand pump
SUTEAU ANVER VFS 22x15 200t die cutting press was built in 2021 in France by SUTEAU ANVER. The machine is designed for demanding series production in the packaging, clothing and footwear industry. It enables precise cutting of a wide range of non-metallic materials from rolls or sheets, such as rubber, foam, felt or leather. The press force of 200 tonnes, combined with a number of well-proven solutions, guarantees high repeatability of the process and high cutting accuracy. The machining process is fully automatic. A movable beam lowers the head with the blanking die onto the workpiece, performing a precise cut with evenly distributed contact pressure. The cutting point is automatically set in relation to the height of the tool, while the operator can additionally correct its position with an accuracy of 0.01 mm using the control panel. The SUTEAU ANVER VFS 22x15 also enables automati ...
Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge, unused, original packaging -Type: R 100-1 rFr 0-2.5 bar G1/2 A -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 140/135/H110 mm -Weight: 0.6 kg/pc.
Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump
Used double-belt press made by Voran, model: ZBP1100. New 2017. The Voran ZBP1100 belt press is fully automatic and operates continuously, requiring only minimal supervision. Smooth adjustment of speed and pressing force guarantees optimum juice quality and high efficiency, reaching up to 80 per cent. The belt press is versatile and can be used for various types of fruit (stone fruit must be pitted before pressing), berries, vegetables and for drying various materials. The juice is discharged from the machine via a fitted juice pump. Particular attention has been paid to ensuring easy access to all parts of the system and their easy cleaning. Intended use: pressing apples, pears, berries, grapes and other soft fruits Technical specifications - Capacity: up to 7,700 kg/h (actual capacity depends on the type and quality of the raw material) - Juice yield: 80% - Loading or un ...
Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump
Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2017 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2017 Drive power: 11 kW, 400 V / 21 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's s ...
pressure: 160 t distance between columns: 850 mm stroke: 150 mm table surface area: 850x650 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,5 x 2,5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press 400x600 make ZDA Type 100660 manualy operated electrical heated plates Clamping force 1540 kN
Baler Dixi 60 SLD, built in 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of Make: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Filling opening: 990 x 1,110 mm (WxL) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (WxHxL) Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (LxWxH) Machine weight: approx. 5,420 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. The user manual and CE declaration are available. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specificati ...
Specifications Maximum pressure: 9 tons Pressing force: 2.76 kg/cm² Bale size: 650x500x580 mm Power supply: 400V/4kW Year of construction: 1996 Productivity: approx. 3 bales/hr Machine is fully functional, after technical supervision.
Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg
Key data: 200 t
Press brake – 200 T – Open width 1,600 mm For sale is a hydraulic press brake from the manufacturer DURENDUS with a maximum press force of 200 t. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm and a stroke of 1,000 mm, making it suitable for bending, forming and straightening work in industrial use. Technical data + information: Press brake – 200 T – Open width 1,600 mm General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Type: 2-column frame press - Manufacturer: DURENDUS - Press force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Usable area ram: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg Hydraulic cylinders - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylin ...
Horizontal baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2019 Drive power: 11 kW, 400 V / 21 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil Note: The press is in good condition. The operating instructions are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. T ...
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 18 S Year of construction: 2013 Serial No.: 116398 Specifications: Pressing force: 18t Engine: 4 kW Connection voltage: 400/50 V/Hz Cycle time: 22 s Pressing time: 12 s Insertion opening: W x H 107 x 62 cm Height from floor: 98 cm Bale ejected: W x H x D approx. 110 x 70 x 70-80 cm Bale height adjustable Bale weight: 120 – 180 kg depending on the material to be pressed Machine width: 152 cm Machine depth: 95 cm Machine height: 197 cm Weight: 850 kg (Subject to errors in the technical data)
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113653 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
for sale is a very well-maintained Hammelmann high-pressure system, built in 2019, with ES 3 control. The system can be used immediately and is in very good used condition. Technical data: Manufacturer: Hammelmann GmbH Machine No.: B9.02302.xxxx Ref: 09.63302.xxxx Year of Make: 2019 Pump capacity: 261 kW Speed: 1,800 rpm Max. pressure: 940 bar Flow rate: 152 l/min Piston diameter: 33 mm Pressure Control Valve: 0046 Oil: PAO VG 320 Oil volume: 28.5 l Control: Hammelmann ES 3 Operating hours according to the display: Operating hours system: 3.048,43 h Pump operating hours: 1,624.17 h Drive Diesel Volvo TAD 1351 VE step IIIA/TIER 3 Power 285 kW The facility is well maintained, technically ready for use and can be used immediately. Further information, photos and price on request.
used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141893 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
Nominal pressing force 4,000 kN Plunger stroke, adjustable in steps 30160 mm Plunger adjustment 180 mm Projection 515 mm Idle stroke rate 45 / min Option: infinitely variable 10 ... 60 / min Tool installation height at maximum stroke bottom and top adjustment 660 mm Table clamping area (WxD) 1,700 x 1,000 mm Table height above floor 1,005 mm Plunger clamping surface (WxD) 1,100 x 800 mm Pin hole in plunger 65 mm Main motor power 45 kW Height of the machine approx. 4,325 mm Weight of the machine 33,000 kg Control system - press safety control with redundant design and self-diagnosis as well as a status and error display in plain text Stepless stroke rate control in the range of 1060 strokes/min via ABB frequency converter Control variant -touchscreen TFT color incl. electronic cam switchgear with tool control and tool safety, ...
Specifications Maximum pressure: 36 tons Pressing force: 46.75 tons/m² Duct cross-section: 700x1100 x reg mm Bale weight: 380 kg Power supply: 400 V/ 15 kW Year of construction: 2009-2010 Number of ties: 4 vertical Dimensions of the tailgate: 1030x1100 mm Weight: approx. 3.9 tonnes Bale tying: manual
Press for paper or plastic Pressing pressure 5 tons 400 V 16 A Length 80 cm Width 80 cm Height 2 m
Oil Press KK100 F Universal Features: Length 1710 mm Width 550 mm Total height 1230 mm Weight 390 kg Description: Sowing capacity: up to 100 kg/h Motor power: 7.5 kW Speed: 15–70 1/min. Voltage – Standard Model: 400V 3-phase | 230V 3-phase Voltage – Special version: 230V | 1-phase Application: Mainly for seeds with an oil content of 6–50%: Amaranth, argan, apricot kernels, avocado seeds, baobab, cottonseed, blueberry, fenugreek, borage, nettle, beechnuts, cashew, copra/coconut, chia, strawberry seeds, peanut, safflower, pomegranate seeds, rosehip seeds, hemp, hazelnut, raspberry seeds, elderberry seeds, jatropha, jojoba, currant seeds, coffee beans, cocoa, camellia, cherry stones, coriander, cumin, pumpkin seeds (unpeeled), camelina, linseed, lupins, corn germ, marjoram, tangerine, almonds, Mango seeds, milk thistle, melon seeds, poppy seeds, m ...
Horizontal baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2020 Drive power: 11 kW, 400 V / 21 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil Note: The press is in good condition. It has been checked and tested. You can find a video on our website or YouTube channel. The operating instructions are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subje ...
automatic baler Manafacture: PAAL Type: PACOMAT IS Year of construction: 1993 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Duct format: 700 x 700 mm Filling opening: 800 x 650 mm Drive power: 18.5 kW Throughput: 80 m³/h with additional manual feed hopper Wire passage seen in the direction of pressing on the left side
automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 V5/H3 Operating hours: approx. 5,400 hours Year of Make: 2021 Technical data: Length of the channel baler: approx. 13,500 mm Width of the channel baler: approx. 2,400 mm Height of the channel baler: approx. 3,400 mm Weight of the channel baler: approx. 45,000 kg Filling opening: 1,020 x 2,000 mm Channel cross-section height x width: 750 x 1,100 mm Bale weight depending on length and material 600 - 900 kg Press force: 1,200 kN at 315 bar Electrical data: Operating voltage: 400 V/3 PE Frequency: 50 Hz Voltage tolerance: +/- max. 5% Degree of protection: IP 55 Control: Siemens S7 1.500 with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h. Pumps on pump plate completely piped and installed in the oil tank. O ...
Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t
Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data
automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 H5 / RB Operating hours: approx. 2,800 hours Year of Make: 2017 Machine No.: U24170 Technical data: Press force plunger: 1,000 kN at 260 bar Cutting force: 1,200 kN at 315 bar Specific pressing force: 124 N/cm² Main pump drive 1 x 55 kW Power Steering Pump: 1 x 11 kW Pump capacity: 410 Ltr./min. Oil tank capacity: 1,300 ltr Volume output under operating conditions: max. 280 m³/h Weight performance depending on the bulk density at 20 to 30 kg/m³ approx. 8.4 t/h for 30 to 50 kg/m³ approx. 13.0 t/h at 60 kg/m³ approx. 16.0 t/h at 100 kg/m³ approx. 23.0 t/h Binding: 5-fold horizontal for plastic cable Filling opening: 1,020 x 2,000 mm Channel cross-section height x width: 1,100 x 1,100 mm Bale weight depending on length and material 800 - 1,000 kg Press bottom planked wi ...
New, unused automatic baler Manufacturer: PAAL Type: KONTI X 700 J Including automatic 4-fold cross binding Hours: 0 Year of construction 2026 Technical data: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW (axial piston pumps) Throughput capacity (according to manufacturer's specifications): approx. 675 m³/h Capacity at 35 kg/m³: 23.6 t/h Capacity at 60 kg/m³: 38.7 t/h Capacity at 100 kg/m³: 57.5 t/h Binding: 5-fold vertical + 4-fold horizontal Machine weight: up to approx. 59 t including new press feed belt Manufacturer: PAAL Year of construction 2026 Type KEF 1900 incl. gooseneck Conveyor width: 1,900 mm Feed length: approx. 6,250 mm Subject to errors in the technical data.
Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s
Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm
automatic baler Manufacturer: PAAL Type: KONTI 125 D / SO Year of Make: 2002 Technical data: Press force: 60 t at 300 bar Specific pressing force: 7.79 kg/cm² Channel format: 700 x 1,100 mm Bale weight: 425 - 580 kg, depending on material and bale length Filling opening: 1,400 x 1,020 mm Machine weight: approx. 20 t Drive power: 30 kW Throughput: 150 m³/h Pressing capacity: approx. 5.00 t/h at department store (35 kg/m³ bulk density) approx. 8.75 t/h for mixed paper (60 kg/m³ bulk density) approx. 12.5 t/h for collected goods (100 kg/m³ bulk density) Wirbulator, which can be swivelled in by hand, has been retrofitted. Optionally with: Press feed belt Manufacturer: PAAL Type KEM 1400 Year of Make: 2002 Technical data: Conveyor width: approx. 1,400 mm Wheelbase: approx. 14,250 mm Feed length: approx. ...
pressure: 20 t throat: 185 mm stroke: 100 mm table surface area: 380 x 350 mm dayligth: 250 mm table height over floor: 840 mm total power requirement: 4 kW weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355
Fully automatic baler Manufacturer: BOLLEGRAAF Type: HBC 80 Year of Make: 2000 Operating hours at the end of Feb. 2026: approx. 41,500 hours Technical data: Press force: 78 t Specific pressing force: 4.58 kg/cm² Drive power: 1 x 45.0 kW Throughput under operating conditions: with a bulk density of 20 kg/m³ approx. 9.0 t/h with a bulk density of 50 kg/m³ approx. 18.5 t/h at 100 kg/m³ bulk density approx. 30 t/h Filling opening: 1,500 x 1,100 mm Bale size: 720 x 1,100 mm (H x W) Binding: 4-fold vertical Machine weight: approx. 24 t Bale weights: up to approx. 550 - 800 kg including: - Wire unwinding devices - Feed belt with approx. 6 m feed length - Conveyor belt hopper - Walking area with ladder on the funnel according to photos
Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center hole ...
maximum number of results exceeded
please refine your search
